- Apr 27, 2016
-
-
Geert Uytterhoeven authored
Add a device node for the System Controller. Hook up the Cortex-A57 CPU cores and the Cortex-A57 and Cortex A53 L2 caches/SCUs to their respective PM Domains. Signed-off-by:
Geert Uytterhoeven <geert+renesas@glider.be> Acked-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by:
Simon Horman <horms+renesas@verge.net.au>
-
Simon Horman authored
Second Round of Renesas ARM Based SoC R-Car SYSC Updates for v4.7 Introduce a DT-based driver for the R-Car System Controller, as found on Renesas R-Car H1, R-Car Gen2, and R-Car Gen3 SoCs.
-
Geert Uytterhoeven authored
clk_get() on a disabled clock node will return -EPROBE_DEFER, which can cause drivers to be deferred forever if such clocks are referenced in their devices' clocks properties. Update the various disabled external clock nodes to default to a frequency of 0, but don't disable them, to prevent this. Reported-by:
Jürg Billeter <j@bitron.ch> Signed-off-by:
-
Wolfram Sang authored
It can be used for the watchdog. Signed-off-by:
Wolfram Sang <wsa+renesas@sang-engineering.com> Acked-by:
-
Phil Edworthy authored
Signed-off-by:
Phil Edworthy <phil.edworthy@renesas.com> Acked-by:
-
Phil Edworthy authored
Signed-off-by:
-
- Apr 26, 2016
-
-
Geert Uytterhoeven authored
Signed-off-by:
-
Geert Uytterhoeven authored
Signed-off-by:
-
Geert Uytterhoeven authored
R-Car M2-N is identical to R-Car M2-W w.r.t. power domains, so reuse the definitions from the latter. Signed-off-by:
-
Geert Uytterhoeven authored
Signed-off-by:
-
Geert Uytterhoeven authored
Signed-off-by:
-
Geert Uytterhoeven authored
Signed-off-by:
-
Geert Uytterhoeven authored
On R-Car H3, some power areas (e.g. A3VP) contain I/O devices, which are also part of the CPG/MSSR Clock Domain. On all R-Car SoCs, devices in the "always-on" PM Domain are part of the Clock Domain served by the CPG/MSSR or CPG/MSTP driver. Hook up the CPG/MSTP or CPG/MSSR Clock Domain attach/detach callbacks to enable power management using module clocks. Which callback to hook up depends on the presence of device nodes compatible with "renesas,cpg-mstp-clocks". This clears the path for a future migration from the CPG/MSTP to the CPG/MSSR driver on R-Car H1 and Gen2. Signed-off-by:
Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by:
-
- Apr 22, 2016
-
-
Geert Uytterhoeven authored
As of commit b12ff416 ("ARM: shmobile: r8a7779: Remove legacy PM Domain remainings"), rcar_sysc_power_is_off() is no longer used from SoC-specific code. Signed-off-by:
-
Geert Uytterhoeven authored
Populate the SYSC PM domains from DT, based on the presence of a device node for the System Controller. The actual power area hiearchy, and features of specific areas are obtained from tables in the C code. The SYSCIER and SYSCIMR register values are derived from the power areas present, which will help to get rid of the hardcoded values in R-Car H1 and R-Car Gen2 platform code later. Initialization is done from an early_initcall(), to make sure the PM Domains are initialized before secondary CPU bringup. Signed-off-by:
-
Geert Uytterhoeven authored
Print requested power domain state. Signed-off-by:
-
Geert Uytterhoeven authored
Move the pm-rcar driver from arch/arm/mach-shmobile/ to drivers/soc/renesas/, and its header file to include/linux/soc/renesas/, so it can be shared between arm32 (R-Car H1 and Gen2) and arm64 (R-Car Gen3). Rename it to rcar-sysc as it's really a driver for the R-Car System Controller (SYSC). Kill the intermediate PM_RCAR config symbol, as it's not user configurable anymore, and to prepare for SoC-specific make rules. Add the missing #include <linux/types.h> to rcar-sysc.h, which was exposed by different include order. Signed-off-by:
-
Simon Horman authored
Merge tag 'clk-renesas-for-v4.7-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-drivers into rcar-sysc-for-v4.7 clk: renesas: R-Car SYSC PM Domain Preparation - Export the CPG/MSSR and CPG/MSTP attach/detach_dev callbacks, so they can be called by the R-Car SYSC PM Domain driver.
-
- Apr 20, 2016
-
-
Geert Uytterhoeven authored
The R-Car SYSC PM Domain driver has to power manage devices in power areas using clocks. To reuse code and to share knowledge of clocks suitable for power management, this is ideally done through the existing cpg_mssr_attach_dev() and cpg_mssr_detach_dev() callbacks. Hence these callbacks can no longer rely on their "domain" parameter pointing to the CPG/MSSR Clock Domain. To handle this, keep a pointer to the clock domain in a static variable. cpg_mssr_attach_dev() has to support probe deferral, as the R-Car SYSC PM Domain may be initialized, and devices may be added to it, before the CPG/MSSR Clock Domain is initialized. Dummy callbacks are provided for the case where CPG/MSTP support is not included, so the rcar-sysc driver won't have to care about this. Signed-off-by:
-
Geert Uytterhoeven authored
Provide dummy cpg_mstp_{at,de}tach_dev() PM Domain callbacks if CPG/MSTP support is not included, so the rcar-sysc driver won't have to care about this. Signed-off-by: -
Geert Uytterhoeven authored
Currently the decision whether to build the renesas-cpg-mssr and clk-mstp drivers is handled by Makefile logic. However, the rcar-sysc driver will need to know whether CPG/MSSR and/or CPG/MSTP support are available or not. To avoid having to duplicate this logic, move it to Kconfig. Provide non-visible CLK_RENESAS_CPG_MSSR and CLK_RENESAS_CPG_MSTP Kconfig symbols, which can be used by both Makefiles and C code. Signed-off-by:
-
- Apr 15, 2016
-
-
Geert Uytterhoeven authored
Signed-off-by:
-
Geert Uytterhoeven authored
Signed-off-by:
-
Geert Uytterhoeven authored
R-Car M2-N is identical to R-Car M2-W w.r.t. power domains, so reuse the definitions from the latter. Signed-off-by:
-
Geert Uytterhoeven authored
Signed-off-by:
-
Geert Uytterhoeven authored
Signed-off-by:
-
Geert Uytterhoeven authored
Signed-off-by:
-
Geert Uytterhoeven authored
The Renesas R-Car System Controller provides power management for the CPU cores and various coprocessors, following the generic PM domain bindings in Documentation/devicetree/bindings/power/power_domain.txt. This supports R-Car Gen1 (H1), Gen2, and Gen3. Signed-off-by:
Rob Herring <robh@kernel.org> Signed-off-by:
-
- Apr 07, 2016
-
-
Geert Uytterhoeven authored
Make it clear that the "domain" parameter of the cpg_mstp_attach_dev() and cpg_mstp_detach_dev() functions is not used. The cpg_mstp_attach_dev() and cpg_mstp_detach_dev() callbacks are not only used by the CPG/MSTP Clock Domain driver, but also by the R-Mobile SYSC PM Domain driver. Signed-off-by: -
Geert Uytterhoeven authored
As of commit 71d076ce ("ARM: shmobile: Enable PM and PM_GENERIC_DOMAINS for SoCs with PM Domains"), CONFIG_PM_GENERIC_DOMAINS_OF is always enabled for SoCs with a CPG/MSSR block. Signed-off-by:
-
Geert Uytterhoeven authored
As of commit 71d076ce ("ARM: shmobile: Enable PM and PM_GENERIC_DOMAINS for SoCs with PM Domains"), CONFIG_PM_GENERIC_DOMAINS_OF is always enabled for SoCs with MSTP clocks. Signed-off-by:
-
- Apr 06, 2016
-
-
Wolfram Sang authored
Signed-off-by:
-
Wolfram Sang authored
R can select between two parents. We deal with it like this: During initialization, check if EXTALR is populated. If so, use it for R. If not, use R_Internal. clk_mux doesn't help here because we don't want to switch parents depending on the clock rate. The clock rate (and source) should stay constant for the watchdog, so I think a setup like this during initialization makes sense. Signed-off-by:
-
Wolfram Sang authored
Signed-off-by:
-
Wolfram Sang authored
Gen3 has two clocks (OSC and R) which look like a DIV6 clock but their divider value is read-only and depends on MD pins at bootup. Add support for such clocks by reading the value and adding a fixed clock. Signed-off-by:
-
- Mar 29, 2016
-
-
Wolfram Sang authored
About SD clocks: The clock type is Gen3 specific, the callbacks are all Gen3 specific; I think the clock definition should also be Gen3 specific and not in the general header file. Signed-off-by:
-
Ulrich Hecht authored
Signed-off-by:
Ulrich Hecht <ulrich.hecht+renesas@gmail.com> Signed-off-by:
-
- Mar 28, 2016
-
-
Simon Horman authored
Use recently added fallback compatibility string in r8a7795 device tree. Signed-off-by:
-
Ramesh Shanmugasundaram authored
Adds CAN controller nodes for r8a7795. Note: CAN channel register base address mentioned in R-Car Gen3 Hardware User Manual v0.5E is incorrect. The corrected base addresses are: CAN Channel 0 - 0xe6c30000 CAN Channel 1 - 0xe6c38000 Signed-off-by:
Ramesh Shanmugasundaram <ramesh.shanmugasundaram@bp.renesas.com> Signed-off-by:
-
Ramesh Shanmugasundaram authored
Adds external CAN clock node for r8a7795. This clock can be used as fCAN clock of CAN and CAN FD controller. Signed-off-by:
-
