- Jul 29, 2020
-
-
Christian Eggers authored
Simply copying all xfers from userspace into one bounce buffer causes alignment problems if the SPI controller uses DMA. Ensure that all transfer data blocks within the rx and tx bounce buffers are aligned for DMA (according to ARCH_KMALLOC_MINALIGN). Alignment may increase the usage of the bounce buffers. In some cases, the buffers may need to be increased using the "bufsiz" module parameter. Signed-off-by:
Christian Eggers <ceggers@arri.de> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20200728100832.24788-1-ceggers@arri.de Signed-off-by:
Mark Brown <broonie@kernel.org>
-
- Jul 27, 2020
-
-
Colton Lewis authored
Silence documentation build warnings by correcting kernel-doc comment for spi_transfer struct. Signed-off-by:
Colton Lewis <colton.w.lewis@protonmail.com> Link: https://lore.kernel.org/r/20200725050242.279548-1-colton.w.lewis@protonmail.com Signed-off-by:
-
Jonathan Liu authored
The spi-sun4i driver already has the ability to do large transfers. However, the max transfer size reported is still fifo depth - 1. Update the max transfer size reported to the max value possible. Fixes: 19673791 ("spi: sun4i: Allow transfers larger than FIFO size") Signed-off-by:
Jonathan Liu <net147@gmail.com> Acked-by:
Maxime Ripard <mripard@kernel.org> Link: https://lore.kernel.org/r/20200727072328.510798-1-net147@gmail.com Signed-off-by:
-
Clark Wang authored
Enable runtime pm support for spi-imx driver. Signed-off-by:
Clark Wang <xiaoning.wang@nxp.com> Link: https://lore.kernel.org/r/20200727063354.17031-1-xiaoning.wang@nxp.com Signed-off-by:
-
- Jul 22, 2020
-
-
leilk.liu authored
Add a DT binding documentation for the MT8192 soc. Signed-off-by:
leilk.liu <leilk.liu@mediatek.com> Link: https://lore.kernel.org/r/20200721122436.31544-1-leilk.liu@mediatek.com Signed-off-by:
-
leilk.liu authored
This patch add spi support for mt8192 IC. Signed-off-by:
-
Dilip Kota authored
Add support to SPI controller on Intel Atom based Lightning Mountain SoC which reuses the Lantiq SPI controller IP. Signed-off-by:
Dilip Kota <eswara.kota@linux.intel.com> Reviewed-by:
Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/7d644e5d03ef534f719763e5c823c1673e53d1a5.1594957019.git.eswara.kota@linux.intel.com Signed-off-by:
-
Dilip Kota authored
Add support to SPI controller on Intel Atom based Lightning Mountain SoC which reuses Lantiq SPI controller IP. Signed-off-by:
-
Dilip Kota authored
Moving interrupt configuration to SoC specific data structure helps to add support for newer SoCs on which SPI controller with lesser interrupt lines compared to existing chipsets. Signed-off-by:
-
Dilip Kota authored
On newer chipsets, SPI controller has fifos of larger size. So add the fifo size bit mask entry in SoC specific data structure. Signed-off-by:
-
Dilip Kota authored
On newer chipsets interrupt need to be acknowledged as they use different interrupt controller which does not acknowledge the interrupts automatically. Signed-off-by:
-
Dilip Kota authored
Address of Interrupt control registers are different on new chipsets. So move them to SoC specific data structure. Signed-off-by:
-
Dilip Kota authored
Existing driver supports only single core SoC. New multicore platforms uses the same driver/IP so SMP support is required. This patch adds multicore support in the driver. Signed-off-by:
-
Dilip Kota authored
In full duplex mode, rx overflow error is observed. To overcome the error, wait until the complete data got received and proceed further. Fixes: 17f84b79 ("spi: lantiq-ssc: add support for Lantiq SSC SPI controller") Signed-off-by:
-
Vaibhav Gupta authored
Drivers using legacy PM have to manage PCI states and device's PM states themselves. They also need to take care of configuration registers. With improved and powerful support of generic PM, PCI Core takes care of above mentioned, device-independent, jobs. This driver makes use of PCI helper functions like pci_save/restore_state(), pci_enable/disable_device(), pci_enable_wake() and pci_set_power_state() to do required operations. In generic mode, they are no longer needed. Change function parameter in both .suspend() and .resume() to "struct device*" type. Use dev_get_drvdata() to get drv data. Compile-tested only. Signed-off-by:
Vaibhav Gupta <vaibhavgupta40@gmail.com> Link: https://lore.kernel.org/r/20200720155714.714114-1-vaibhavgupta40@gmail.com Signed-off-by:
-
Linus Walleij authored
This converts the PPC4xx SPI driver to use GPIO descriptors. The driver is already just picking some GPIOs from the device tree so the conversion is pretty straight forward. However this driver is looking form a pure "gpios" property rather than the standard binding "cs-gpios" so we need to add a new exception to the gpiolib OF parser to allow this for this driver's compatibles. Signed-off-by:
Linus Walleij <linus.walleij@linaro.org> Cc: linuxppc-dev@lists.ozlabs.org Link: https://lore.kernel.org/r/20200714072226.26071-1-linus.walleij@linaro.org Signed-off-by:
-
Shreyas Joshi authored
The spi cadence driver should support spi-cs-high in mode bits so that the peripherals that needs the chip select to be high active can use it. Add the SPI-CS-HIGH flag in the supported mode bits. Signed-off-by:
Shreyas Joshi <shreyas.joshi@biamp.com> Link: https://lore.kernel.org/r/20200710211655.1564-1-shreyas.joshi@biamp.com Signed-off-by:
-
Clark Wang authored
Call the put function after probe successfully. Otherwise, the lpspi module will keep active status until the first spi transfer called. Disable runtime pm when probe fails. There is no need to active runtime pm after probe failed. Signed-off-by:
-
- Jul 17, 2020
-
-
Mark Brown authored
Merge series "Add support for [H]SCIF/TMU/CMT/THS/SDHI/MSIOF/CAN[FD]/I2C/IIC/RWDT on R8A774E1" from Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>: Hi All, This patch series enables support for following on RZ/G2H SoC, * CPU OPP * THS * CMT/TMU * I2C/IIC * MSIOF * RWDT * SDHI * SCIF/HSCIF * CAN/CANFD Cheers, Prabhakar Lad Prabhakar (14): dt-bindings: thermal: rcar-gen3-thermal: Add r8a774e1 support dt-bindings: timer: renesas,cmt: Document r8a774e1 CMT support arm64: dts: renesas: r8a774e1: Add SCIF and HSCIF nodes arm64: dts: renesas: r8a774e1: Add SDHI nodes dt-bindings: i2c: renesas,i2c: Document r8a774e1 support dt-bindings: i2c: renesas,iic: Document r8a774e1 support arm64: dts: renesas: r8a774e1: Add I2C and IIC-DVFS support dt-bindings: spi: renesas,sh-msiof: Add r8a774e1 support arm64: dts: renesas: r8a774e1: Add MSIOF nodes dt-bindings: watchdog: renesas,wdt: Document r8a774e1 support arm64: dts: renesas: r8a774e1: Add RWDT node dt-bindings: can: rcar_can: Document r8a774e1 support dt-bindings: can: rcar_canfd: Document r8a774e1 support arm64: dts: renesas: r8a774e1: Add CAN[FD] support Marian-Cristian Rotariu (6): arm64: dts: renesas: r8a774e1: Add operating points thermal: rcar_gen3_thermal: Add r8a774e1 support arm64: dts: renesas: r8a774e1: Add RZ/G2H thermal support arm64: dts: renesas: r8a774e1: Add CMT device nodes dt-bindings: timer: renesas,tmu: Document r8a774e1 bindings arm64: dts: renesas: r8a774e1: Add TMU device nodes .../devicetree/bindings/i2c/renesas,i2c.txt | 1 + .../devicetree/bindings/i2c/renesas,iic.txt | 1 + .../devicetree/bindings/net/can/rcar_can.txt | 1 + .../bindings/net/can/rcar_canfd.txt | 1 + .../bindings/spi/renesas,sh-msiof.yaml | 1 + .../bindings/thermal/rcar-gen3-thermal.yaml | 1 + .../bindings/timer/renesas,cmt.yaml | 2 + .../devicetree/bindings/timer/renesas,tmu.txt | 1 + .../bindings/watchdog/renesas,wdt.yaml | 1 + arch/arm64/boot/dts/renesas/r8a774e1.dtsi | 713 +++++++++++++++++- drivers/thermal/rcar_gen3_thermal.c | 4 + 11 files changed, 715 insertions(+), 12 deletions(-) -- 2.17.1
-
Lee Jones authored
Since ACPI_PTR() is used to NULLify the value when !CONFIG_ACPI, struct 'spi_acpi_match' becomes defined but unused. Fixes the following W=1 kernel build warning(s): drivers/spi/spi-amd.c:297:36: warning: ‘spi_acpi_match’ defined but not used [-Wunused-const-variable=] 297 | static const struct acpi_device_id spi_acpi_match[] = { | ^~~~~~~~~~~~~~ Signed-off-by:Lee Jones <lee.jones@linaro.org> Cc: Sanjay R Mehta <sanju.mehta@amd.com> Link: https://lore.kernel.org/r/20200717135424.2442271-15-lee.jones@linaro.org Signed-off-by:
-
Lee Jones authored
Since ACPI_PTR() is used to NULLify the value when !CONFIG_ACPI, struct 'pxa2xx_spi_acpi_match' becomes defined but unused. Fixes the following W=1 kernel build warning(s): drivers/spi/spi-pxa2xx.c:1435:36: warning: ‘pxa2xx_spi_acpi_match’ defined but not used [-Wunused-const-variable=] 1435 | static const struct acpi_device_id pxa2xx_spi_acpi_match[] = { | ^~~~~~~~~~~~~~~~~~~~~ Signed-off-by: -
Lee Jones authored
The only way this driver can be probed by MFD via its parent device. No other reference to 'microchip,at91sam9g45-usart-spi' exists in the kernel. Fixes the following W=1 kernel build warning(s): drivers/spi/spi-at91-usart.c:684:34: warning: ‘at91_usart_spi_dt_ids’ defined but not used [-Wunused-const-variable=] 684 | static const struct of_device_id at91_usart_spi_dt_ids[] = { | ^~~~~~~~~~~~~~~~~~~~~ Suggested-by:Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by:
-
Lee Jones authored
Fixes the following W=1 kernel build warning(s): drivers/spi/spi-topcliff-pch.c:184: warning: Function parameter or member 'io_base_addr' not described in 'pch_spi_data' drivers/spi/spi-topcliff-pch.c:184: warning: Function parameter or member 'pkt_tx_buff' not described in 'pch_spi_data' drivers/spi/spi-topcliff-pch.c:184: warning: Function parameter or member 'pkt_rx_buff' not described in 'pch_spi_data' drivers/spi/spi-topcliff-pch.c:184: warning: Function parameter or member 'dma' not described in 'pch_spi_data' drivers/spi/spi-topcliff-pch.c:184: warning: Function parameter or member 'use_dma' not described in 'pch_spi_data' drivers/spi/spi-topcliff-pch.c:184: warning: Function parameter or member 'save_total_len' not described in 'pch_spi_data' Signed-off-by:
-
Lee Jones authored
Fixes the following W=1 kernel build warning(s): drivers/spi/spi-zynqmp-gqspi.c:205: warning: Function parameter or member 'slavecs' not described in 'zynqmp_gqspi_selectslave' drivers/spi/spi-zynqmp-gqspi.c:205: warning: Function parameter or member 'slavebus' not described in 'zynqmp_gqspi_selectslave' drivers/spi/spi-zynqmp-gqspi.c:205: warning: Excess function parameter 'flashcs' description in 'zynqmp_gqspi_selectslave' drivers/spi/spi-zynqmp-gqspi.c:205: warning: Excess function parameter 'flashbus' description in 'zynqmp_gqspi_selectslave' drivers/spi/spi-zynqmp-gqspi.c:902: warning: Function parameter or member 'dev' not described in 'zynqmp_qspi_suspend' drivers/spi/spi-zynqmp-gqspi.c:902: warning: Excess function parameter '_dev' description in 'zynqmp_qspi_suspend' Signed-off-by:
Michal Simek <michal.simek@xilinx.com> Link: https://lore.kernel.org/r/20200717135424.2442271-11-lee.jones@linaro.org Signed-off-by:
-
Lee Jones authored
Fixes the following W=1 kernel build warning(s): drivers/spi/spi-zynq-qspi.c:143: warning: Function parameter or member 'dev' not described in 'zynq_qspi' drivers/spi/spi-zynq-qspi.c:334: warning: Function parameter or member 'spi' not described in 'zynq_qspi_config_op' drivers/spi/spi-zynq-qspi.c:334: warning: Excess function parameter 'qspi' description in 'zynq_qspi_config_op' Signed-off-by:
-
Lee Jones authored
Also demote non-worthy kerneldoc headers to standard comment blocks. Fixes the following W=1 kernel build warning(s): drivers/spi/spi-pl022.c:304: warning: cannot understand function prototype: 'enum ssp_writing ' drivers/spi/spi-pl022.c:330: warning: Function parameter or member 'loopback' not described in 'vendor_data' drivers/spi/spi-pl022.c:398: warning: Function parameter or member 'rx_lev_trig' not described in 'pl022' drivers/spi/spi-pl022.c:398: warning: Function parameter or member 'tx_lev_trig' not described in 'pl022' drivers/spi/spi-pl022.c:398: warning: Function parameter or member 'dma_running' not described in 'pl022' drivers/spi/spi-pl022.c:670: warning: Function parameter or member 'pl022' not described in 'readwriter' drivers/spi/spi-pl022.c:1250: warning: Function parameter or member 'irq' not described in 'pl022_interrupt_handler' drivers/spi/spi-pl022.c:1250: warning: Function parameter or member 'dev_id' not described in 'pl022_interrupt_handler' drivers/spi/spi-pl022.c:1343: warning: Function parameter or member 'pl022' not described in 'set_up_next_transfer' drivers/spi/spi-pl022.c:1343: warning: Function parameter or member 'transfer' not described in 'set_up_next_transfer' Signed-off-by:
-
Lee Jones authored
Fixes the following W=1 kernel build warning(s): drivers/spi/spi-s3c64xx.c:150: warning: Function parameter or member 'quirks' not described in 's3c64xx_spi_port_config' drivers/spi/spi-s3c64xx.c:150: warning: Function parameter or member 'clk_ioclk' not described in 's3c64xx_spi_port_config' drivers/spi/spi-s3c64xx.c:189: warning: Function parameter or member 'pdev' not described in 's3c64xx_spi_driver_data' drivers/spi/spi-s3c64xx.c:189: warning: Function parameter or member 'rx_dma' not described in 's3c64xx_spi_driver_data' drivers/spi/spi-s3c64xx.c:189: warning: Function parameter or member 'tx_dma' not described in 's3c64xx_spi_driver_data' drivers/spi/spi-s3c64xx.c:189: warning: Function parameter or member 'port_conf' not described in 's3c64xx_spi_driver_data' drivers/spi/spi-s3c64xx.c:189: warning: Function parameter or member 'port_id' not described in 's3c64xx_spi_driver_data' Signed-off-by:
-
Lee Jones authored
Looks like it hasn't ever been checked. Fixes the following W=1 kernel build warning(s): drivers/spi/spi-meson-spicc.c: In function ‘meson_spicc_reset_fifo’: drivers/spi/spi-meson-spicc.c:365:6: warning: variable ‘data’ set but not used [-Wunused-but-set-variable] 365 | u32 data; | ^~~~ Signed-off-by:
-
Lee Jones authored
Fixes the following W=1 kernel build warning(s): drivers/spi/spi-meson-spifc.c:80: warning: Function parameter or member 'dev' not described in 'meson_spifc' Signed-off-by:
-
Lee Jones authored
ep93xx_spi_read_write() changed is parameters, but the function documentation was left unchanged. Let's realign. Fixes the following W=1 kernel build warning(s): drivers/spi/spi-ep93xx.c:227: warning: Function parameter or member 'master' not described in 'ep93xx_spi_read_write' drivers/spi/spi-ep93xx.c:227: warning: Excess function parameter 'espi' description in 'ep93xx_spi_read_write' Signed-off-by:
-
Lee Jones authored
Fixes the following W=1 kernel build warning(s): drivers/spi/spi-davinci.c:249: warning: Function parameter or member 'dspi' not described in 'davinci_spi_get_prescale' drivers/spi/spi-davinci.c:249: warning: Function parameter or member 'max_speed_hz' not described in 'davinci_spi_get_prescale' drivers/spi/spi-davinci.c:249: warning: Excess function parameter 'maxspeed_hz' description in 'davinci_spi_get_prescale' drivers/spi/spi-davinci.c:719: warning: Function parameter or member 'data' not described in 'dummy_thread_fn' drivers/spi/spi-davinci.c:719: warning: Excess function parameter 'context_data' description in 'dummy_thread_fn' drivers/spi/spi-davinci.c:735: warning: Function parameter or member 'data' not described in 'davinci_spi_irq' drivers/spi/spi-davinci.c:735: warning: Excess function parameter 'context_data' description in 'davinci_spi_irq' Signed-off-by:
-
Lee Jones authored
No attempt has been made to document any of the demoted functions here. Fixes the following W=1 kernel build warning(s): drivers/spi/spi-bitbang.c:181: warning: Function parameter or member 'spi' not described in 'spi_bitbang_setup' drivers/spi/spi-bitbang.c:215: warning: Function parameter or member 'spi' not described in 'spi_bitbang_cleanup' drivers/spi/spi-bitbang.c:434: warning: Function parameter or member 'bitbang' not described in 'spi_bitbang_stop' Signed-off-by:
-
Lee Jones authored
Kerneldoc function parameter descriptions must be in '@.*: ' format. Fixes the following W=1 kernel build warning(s): drivers/spi/spi-loopback-test.c:897: warning: Function parameter or member 'spi' not described in 'spi_test_execute_msg' drivers/spi/spi-loopback-test.c:897: warning: Function parameter or member 'test' not described in 'spi_test_execute_msg' drivers/spi/spi-loopback-test.c:897: warning: Function parameter or member 'tx' not described in 'spi_test_execute_msg' drivers/spi/spi-loopback-test.c:897: warning: Function parameter or member 'rx' not described in 'spi_test_execute_msg' drivers/spi/spi-loopback-test.c:970: warning: Function parameter or member 'spi' not described in 'spi_test_run_test' drivers/spi/spi-loopback-test.c:970: warning: Function parameter or member 'test' not described in 'spi_test_run_test' drivers/spi/spi-loopback-test.c:970: warning: Function parameter or member 'tx' not described in 'spi_test_run_test' drivers/spi/spi-loopback-test.c:970: warning: Function parameter or member 'rx' not described in 'spi_test_run_test' Signed-off-by:
-
Lad Prabhakar authored
Document RZ/G2H (R8A774E1) SoC bindings. Signed-off-by:
Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by:
Marian-Cristian Rotariu <marian-cristian.rotariu.rb@bp.renesas.com> Reviewed-by:
Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/1594811350-14066-15-git-send-email-prabhakar.mahadev-lad.rj@bp.renesas.com Signed-off-by:
-
Mark Brown authored
Merge series "spi: bcm2835/bcm2835aux: support effective_speed_hz" from Marc Kleine-Budde <mkl@pengutronix.de>: Hello, I've picked up and forward ported Martin Sperl's patches which add support for effective_speed_hz to the SPI controllers found on all raspberry pi models. See the following patch, which adds this feature to the SPI core, for more information: 5d7e2b5e spi: core: allow reporting the effectivly used speed_hz for a transfer regards, Marc _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel -
Qing Zhang authored
Convert clk_enable() to clk_prepare_enable() and clk_disable() to clk_disable_unprepare() respectively in the spi-coldfire-qspi.c. Signed-off-by:
Qing Zhang <zhangqing@loongson.cn> Link: https://lore.kernel.org/r/1594790807-32319-2-git-send-email-zhangqing@loongson.cn Signed-off-by:
-
Tudor Ambarus authored
The industry refers to these flash types as "SPI NOR" and "SPI NAND". Be consistent and use the same acronyms. Signed-off-by:
Tudor Ambarus <tudor.ambarus@microchip.com> Link: https://lore.kernel.org/r/20200716051144.568606-1-tudor.ambarus@microchip.com Signed-off-by:
-
Tudor Ambarus authored
Optimezed mem*io operations are defined for LE platforms, use them. The ARM and !ARCH_EBSA110 dependencies for COMPILE_TEST were added only for the _memcpy_fromio()/_memcpy_toio() functions. Drop these dependencies. Tested unaligned accesses on both sama5d2 and sam9x60 QSPI controllers using SPI NOR flashes, everything works ok. The following performance improvement can be seen when running mtd_speedtest: sama5d2_xplained (mx25l25635e) - before: mtd_speedtest: eraseblock write speed is 983 KiB/s mtd_speedtest: eraseblock read speed is 6150 KiB/s - after: mtd_speedtest: eraseblock write speed is 1055 KiB/s mtd_speedtest: eraseblock read speed is 20144 KiB/s sam9x60ek (sst26vf064b) - before: mtd_speedtest: eraseblock write speed is 4770 KiB/s mtd_speedtest: eraseblock read speed is 8062 KiB/s - after: mtd_speedtest: eraseblock write speed is 4524 KiB/s mtd_speedtest: eraseblock read speed is 21186 KiB/s Signed-off-by:
-
Mark Brown authored
Currently we always defer idling of controllers to the SPI thread, the goal being to ensure that we're doing teardown that's not suitable for atomic context in an appropriate context and to try to batch up more expensive teardown operations when the system is under higher load, allowing more work to be started before the SPI thread is scheduled. However when the controller does not require any substantial work to idle there is no need to do this, we can instead save the context switch and immediately mark the controller as idle. This is particularly useful for systems where there is frequent but not constant activity. Signed-off-by:
-
Randy Dunlap authored
Change doubled word "as" to "as a". Change "Return: Return:" in kernel-doc notation to have only one "Return:". Signed-off-by:
Randy Dunlap <rdunlap@infradead.org> Cc: Mark Brown <broonie@kernel.org> Cc: linux-spi@vger.kernel.org Link: https://lore.kernel.org/r/40354d64-be71-3952-a980-63a76a278145@infradead.org Signed-off-by:
-
