- Oct 18, 2018
-
-
Marcel Ziswiler authored
Similar to the following: commit 43217236 ("ASoC: tegra_alc5632: fix device_node refcounting") commit 7c5dfd54 ("ASoC: tegra: fix device_node refcounting") Signed-off-by:
Marcel Ziswiler <marcel.ziswiler@toradex.com> Acked-by:
Jon Hunter <jonathanh@nvidia.com> Signed-off-by:
Mark Brown <broonie@kernel.org>
-
- Oct 17, 2018
-
-
Vasily Khoruzhick authored
Allwinner A64 uses the same digital codec part as in A33, so we need to build this driver on ARM64 as well. Signed-off-by:
Vasily Khoruzhick <anarsoul@gmail.com> Acked-by:
Maxime Ripard <maxime.ripard@bootlin.com> Signed-off-by:
-
Vasily Khoruzhick authored
The internal codec on A64 is split into 2 parts. The analog path controls are routed through an embedded custom register bus accessed through the PRCM block. Add an ASoC component driver for it. This should be tied to the codec audio card as an auxiliary device. Signed-off-by:
-
Vasily Khoruzhick authored
The internal codec on Allwinner A64 is split into 2 parts. The analog path controls are routed through an embedded custom register bus accessed through the PRCM block just as on A23/A33/H3. Add a binding for this hardware. Signed-off-by:
-
Vasily Khoruzhick authored
It will be reused by sun50i-codec-analog later. Signed-off-by:
-
Vasily Khoruzhick authored
BCLK / LRCK ratio should be sample size * channels, but it was hardcoded to 32 (0x1 is 32 as per A33 and A64 datasheets). Calculate it basing on sample size and number of channels. Signed-off-by:
-
Marcus Cooper authored
The I2S block used for the audio codec in the A64 differs from other 3 I2S modules in A64 and isn't compatible with H3. But it is very similar to what is found in A10(sun4i). However, its TX FIFO is located at a different address. Signed-off-by:
Marcus Cooper <codekipper@gmail.com> Signed-off-by:
-
Christoph Hellwig authored
The DMA API does its own zone decisions based on the coherent_dma_mask. Signed-off-by:
Christoph Hellwig <hch@lst.de> Reviewed-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
- Oct 15, 2018
-
-
Mac Chiang authored
This patch adds da7219_max98927 machine driver entry into machine table Signed-off-by:
Mac Chiang <mac.chiang@intel.com> Signed-off-by:
-
Mac Chiang authored
This patch adds Kabylake I2S machine driver with: DA7219 audio codec(SSP1) and MAXIM98927(SSP0) speaker amplifier. Signed-off-by:
-
Akshu Agrawal authored
Some 3 pole connectors report impedance greater than threshold of 1000Ohm. Thus, da7219 reports them as LINEOUT. Adding the SND_JACK_LINEOUT type so that we don't fail to detect any 3 pole jack type. Also, changing SND_JACK_HEADPHONE | SND_JACK_MICROPHONE -> SND_JACK_HEADSET Signed-off-by:
Akshu Agrawal <akshu.agrawal@amd.com> Signed-off-by:
-
- Oct 13, 2018
-
-
Kuninori Morimoto authored
pcm3168a is supporting TDM on I2S/Left_J, but there is no settings for it. This patch add it. Signed-off-by:
Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by:
-
Kuninori Morimoto authored
LEFT_J / I2S only can use TDM. This patch adds channel constraint for it. Signed-off-by:
-
Kuninori Morimoto authored
RIGHT_J only can handle 16bit data bits. Current driver just errored if user requests non RIGHT_J + 16bit combination. But it is not useful for user. This patch adds HW constraint for it, and avoid error on such situation. Signed-off-by:
-
- Oct 11, 2018
-
-
Ryan Lee authored
Signed-off-by:
Ryan Lee <ryans.lee@maximintegrated.com> Signed-off-by:
-
Ryan Lee authored
Signed-off-by:
-
Ryan Lee authored
Signed-off-by:
-
Ryan Lee authored
Signed-off-by:
-
- Oct 10, 2018
-
-
Kuninori Morimoto authored
Current audio-graph-card is supporting mclk-fs on CPU node side only. But having Codec node also is good idea. It will be just ignored if not defined. "rcpu_ep" is same as "cpu_ep", This patch tidyup it, too. Signed-off-by:
-
Kuninori Morimoto authored
commit fb2815f4 ("ASoC: rsnd: add support for 16/24 bit slot widths") added TDM width check, and return error if it was not 16/24/32 bit. But it is too strict. This patch uses 32bit same as default. Signed-off-by:
-
Arnd Bergmann authored
max98988 only builds with I2C support enabled, otherwise we get a build error: sound/soc/codecs/max98088.c:1789:1: error: data definition has no type or storage class [-Werror] module_i2c_driver(max98088_i2c_driver); ^~~~~~~~~~~~~~~~~ sound/soc/codecs/max98088.c:1789:1: error: type defaults to 'int' in declaration of 'module_i2c_driver' [-Werror=implicit-int] sound/soc/codecs/max98088.c:1789:1: error: parameter names (without types) in function declaration [-Werror] sound/soc/codecs/max98088.c:1780:26: error: 'max98088_i2c_driver' defined but not used [-Werror=unused-variable] Fixes: 24ae67c5 ("ASoC: max98988: make it selectable") Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Reviewed-by:
Marco Felsch <m.felsch@pengutronix.de> Signed-off-by:
-
- Oct 09, 2018
-
-
Marco Felsch authored
Currently the driver will build only if SND_SOC_ALL_CODECS is set. Adding a Kconfig menu description to build the driver standalone. Signed-off-by:
-
Andreas Färber authored
If master clock is provided through device tree, then update the master clock frequency during set_sysclk. Cc: Tushar Behera <tushar.behera@linaro.org> Signed-off-by:
Andreas Färber <afaerber@suse.de> Acked-by:
Tushar Behera <trblinux@gmail.com> Reviewed-by:
Javier Martinez Canillas <javier.martinez@collabora.co.uk> [m.felsch@pengutronix.de: move mclk request to i2c_probe] [m.felsch@pengutronix.de: make use of snd_soc_component_get_bias_level()] Signed-off-by:
-
Marco Felsch authored
Allow setting the clock provider for the external clock called "mclk". Signed-off-by:
-
- Oct 08, 2018
-
-
Daniel Mack authored
Lookup regulators for Vdd and Vdda during probe, and enable them when the component is linked. Signed-off-by:
Daniel Mack <daniel@zonque.org> Signed-off-by:
-
Daniel Mack authored
Add a device tree documentation file for the wm8782 stereo DAC to describe the regulator handles. Signed-off-by:
Charles Keepax <ckeepax@opensource.cirrus.com> Signed-off-by:
-
- Oct 05, 2018
-
-
Alexandru Ardelean authored
Add device-tree bindings documentation file for ADAU1977 audio codec. This describes device-tree fields that are already supported by the driver. The driver supports both I2C AND and SPI, and this doc covers both aspects of the DT configuration. Signed-off-by:
Alexandru Ardelean <alexandru.ardelean@analog.com> Signed-off-by:
-
Takashi Iwai authored
As a preparatory patch for the upcoming -Wimplicit-fallthrough compiler checks, replace with the standard "fall through" annotation. gcc can't understand the mixed texts, unfortunately. Signed-off-by:
-
Takashi Iwai authored
As a preparatory patch for the upcoming -Wimplicit-fallthrough compiler checks, add the "fall through" annotation in Intel SST skylake driver. Signed-off-by:
-
Takashi Iwai authored
As a preparatory patch for the upcoming -Wimplicit-fallthrough compiler checks, add the "fall through" annotations in rt274 driver. Signed-off-by:
-
Takashi Iwai authored
As a preparatory patch for the upcoming -Wimplicit-fallthrough compiler checks, replace with the standard "fall through" annotation. Unfortunately gcc doesn't understand the mixed comment lines. Signed-off-by:
-
Takashi Iwai authored
As a preparatory patch for the upcoming -Wimplicit-fallthrough compiler checks, replace with the standard "fall through" annotation at the right place. It has to be put right before the next label. Signed-off-by:
-
- Oct 04, 2018
-
-
Tzung-Bi Shih authored
There is no "MACBIAS". It should be "MICBIAS". Signed-off-by:
Tzung-Bi Shih <tzungbi@google.com> Signed-off-by:
-
Daniel Mack authored
The driver already has support for setting the FDRB bit in the CONFA register through platform data, but there was no property to set it in the device-tree bindings. Signed-off-by:
-
Daniel Mack authored
If a "extclk" clock is given, enable and disable it when appropriate. Signed-off-by:
-
Dan Carpenter authored
The q6asm_audio_client_alloc() doesn't return NULL, it returns error pointers. Fixes: 2a9e92d3 ("ASoC: qdsp6: q6asm: Add q6asm dai driver") Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
-
Takashi Iwai authored
skl_tplg_get_token() misses a break in the big switch() block for SKL_TKN_U8_CORE_ID entry. Spotted nicely by -Wimplicit-fallthrough compiler option. Fixes: 6277e832 ("ASoC: Intel: Skylake: Parse vendor tokens to build module data") Cc: <stable@vger.kernel.org> Signed-off-by:
-
- Sep 28, 2018
-
-
YueHaibing authored
Remove duplicated includes linux/of_platform.h and linux/wait.h Signed-off-by:
YueHaibing <yuehaibing@huawei.com> Signed-off-by:
-
Biju Das authored
Document RZ/G1N (R8A7744) SoC bindings. Signed-off-by:
Biju Das <biju.das@bp.renesas.com> Reviewed-by:
Chris Paterson <Chris.Paterson2@renesas.com> Signed-off-by:
-
Arnd Bergmann authored
The 'ret' variable is now only used in an #ifdef, and causes a warning if it is declared outside of that block: sound/soc/codecs/wm9712.c: In function 'wm9712_soc_probe': sound/soc/codecs/wm9712.c:641:6: error: unused variable 'ret' [-Werror=unused-variable] Fixes: 2ed1a8e0 ("ASoC: wm9712: add ac97 new bus support") Signed-off-by:
-
