- Oct 11, 2006
-
-
Jeff Garzik authored
Noticed by Steve Brown <sbrown25@gmail.com> Signed-off-by:Jeff Garzik <jeff@garzik.org>
-
Eran Tromer authored
Make the HDIO_DRIVE_CMD ioctl in libata (ATA command pass through) return a few ATA registers to userspace, following the same convention as the drivers/ide implementation of the same ioctl. This is needed to support ATA commands like CHECK POWER MODE, which return information in nsectors. This fixes "hdparm -C" on SATA drives. Forcing the sense data read via the cc flag causes spurious check conditions, so we filter these out (following the ATA command pass-through specification T10/04-262r7). Signed-off-by:
Eran Tromer <eran@tromer.org> Acked-by:
Tejun Heo <htejun@gmail.com> Cc: Jeff Garzik <jeff@garzik.org> Signed-off-by:
Andrew Morton <akpm@osdl.org> Signed-off-by:
-
- Oct 06, 2006
-
-
Jeff Garzik authored
-
git://git.infradead.org/~dhowells/irq-2.6Linus Torvalds authored
* git://git.infradead.org/~dhowells/irq-2.6: IRQ: Maintain regs pointer globally rather than passing to IRQ handlers IRQ: Typedef the IRQ handler function type IRQ: Typedef the IRQ flow handler function type
-
Peter Osterlund authored
The UDF filesystem can't be mounted in read-write mode any more, because of forgotten braces. Signed-off-by:
Peter Osterlund <petero2@telia.com> [ Duh! ] Signed-off-by:
Linus Torvalds <torvalds@osdl.org>
-
Randy Dunlap authored
Include linux/kallsyms.h unconditionally for print_symbol(). Signed-off-by:
Randy Dunlap <rdunlap@xenotime.net> Signed-off-by:
Andi Kleen <ak@suse.de> Signed-off-by:
-
git://one.firstfloor.org/home/andi/git/linux-2.6Linus Torvalds authored
* 'for-linus' of git://one.firstfloor.org/home/andi/git/linux-2.6: [PATCH] i386: fix rwsem build bug on CONFIG_M386=y [PATCH] x86-64: Annotate interrupt frame backlink in interrupt handlers [PATCH] x86-64: Fix FPU corruption [PATCH] x86: Terminate the kernel stacks for the unwinder [PATCH] i386: Fix PCI BIOS config space access [PATCH] x86-64: Calgary IOMMU: print PCI bus numbers in hex [PATCH] x86-64: Calgary IOMMU: Update Jon's contact info [PATCH] x86-64: Calgary IOMMU: Fix off by one when calculating register space location [PATCH] x86-64: Calgary IOMMU: deobfuscate calgary_init [PATCH] i386: Update defconfig [PATCH] x86-64: Update defconfig [ Manually skipped commits that incorrectly ignored AC in kernel space. The alignment fault is defined to only happen for CPL3 anyway - Linus ]
-
Frederik Deweerdt authored
commit 0181944f adds a 'extended_error_logging' global variable to qla2xxx which is defined by qla4xxx too. Trying to build both drivers results in the following error: LD drivers/scsi/built-in.o drivers/scsi/qla4xxx/built-in.o: In function `qla4xxx_slave_configure': drivers/scsi/qla4xxx/ql4_os.c:1433: multiple definition of `extended_error_logging' drivers/scsi/qla2xxx/built-in.o:drivers/scsi/qla2xxx/qla_os.c:2166: first defined here make[2]: *** [drivers/scsi/built-in.o] Error 1 make[1]: *** [drivers/scsi] Error 2 make: *** [drivers] Error 2 The following patch simply adds a qla2_ (qla4_ respectively) prefix to the variable name. Signed-off-by:
Frederik Deweerdt <frederik.deweerdt@gmail.com> Signed-off-by:
-
Ingo Molnar authored
CONFIG_M386 turns on spinlock-based generic rwsems - which surprises the semaphore.S rwsem stubs. Tested both with and without CONFIG_M386. Reported-by:
Klaus Knopper <knopper@knopper.net> Triaged-by:
Adrian Bunk <bunk@stusta.de> Signed-off-by:
Ingo Molnar <mingo@elte.hu> Signed-off-by:
-
Andi Kleen authored
Add correct CFI annotation to the backlink on top of the interrupt stack. Signed-off-by: -
Andi Kleen authored
This reverts an earlier patch that was found to cause FPU state corruption. I think the corruption happens because unlazy_fpu() can cause FPU exceptions and when it happens after the current switch some processing would affect the state in the wrong process. Thanks to Douglas Crosher and Tom Hughes for testing. Cc: jbeulich@novell.com Signed-off-by: -
Andi Kleen authored
Always make sure RIP/EIP is 0 in the registers stored on the top of the stack of a kernel thread. This makes sure the unwinder code won't try a fallback but knows the stack has ended. AK: this patch is a bit mysterious. in theory they should be terminated anyways, but it seems to fix at least one crash. Anyways double termination probably doesn't hurt. Signed-off-by: -
Andi Kleen authored
Got broken by a earlier change. Also add a printk when no pci config method could be found. Cc: gregkh@suse.de Signed-off-by: -
Jon Mason authored
Make the references to the bus number in hex instead of decimal, as that is the way that lspci prints out the bus numbers. Signed-off-by:
Jon Mason <jdmason@kudzu.us> Signed-off-by:
Muli Ben-Yehuda <muli@il.ibm.com> Signed-off-by:
-
Jon Mason authored
Also add copyright for work done after leaving IBM. Signed-off-by:
-
Jon Mason authored
The purpose of the code being modified is to determine the location of the calgary chip address space. This is done by a magical formula of FE0MB-8MB*OneBasedChassisNumber+1MB*(RioNodeId-ChassisBase) to find the offset where BIOS puts it. In this formula, OneBasedChassisNumber corresponds to the NUMA node, and rionodeid is always 2 or 3 depending on which chip in the system it is. The problem was that we had an off by one error that caused us to account some busses to the wrong chip and thus give them the wrong address space. Fixes RH bugzilla #203971. Signed-off-by:
-
Jon Mason authored
calgary_init's for loop does not correspond to the actual device being checked, which makes its upperbound check for array overflow useless. Changing this to a do-while loop is the correct way of doing this. There should be no possibility of spinning forever in this loop, as pci_get_device states that it will go through all iterations, then return NULL (thus breaking the loop). Signed-off-by:
-
Andi Kleen authored
Signed-off-by: -
Andi Kleen authored
Signed-off-by:
-
- Oct 05, 2006
-
-
David Howells authored
Maintain a per-CPU global "struct pt_regs *" variable which can be used instead of passing regs around manually through all ~1800 interrupt handlers in the Linux kernel. The regs pointer is used in few places, but it potentially costs both stack space and code to pass it around. On the FRV arch, removing the regs parameter from all the genirq function results in a 20% speed up of the IRQ exit path (ie: from leaving timer_interrupt() to leaving do_IRQ()). Where appropriate, an arch may override the generic storage facility and do something different with the variable. On FRV, for instance, the address is maintained in GR28 at all times inside the kernel as part of general exception handling. Having looked over the code, it appears that the parameter may be handed down through up to twenty or so layers of functions. Consider a USB character device attached to a USB hub, attached to a USB controller that posts its interrupts throug...
-
David Howells authored
Typedef the IRQ handler function type. Signed-Off-By:David Howells <dhowells@redhat.com> (cherry picked from 1356d1e5fd256997e3d3dce0777ab787d0515c7a commit)
-
David Howells authored
Typedef the IRQ flow handler function type. Signed-Off-By: -
Alan Cox authored
Signed-off-by:
Alan Cox <alan@redhat.com> Signed-off-by:
-
Linus Torvalds authored
Merge window closed..
-
Mark Assad authored
There is a bug in the current version of the itmtouch USB touchscreen driver. The if statment that checks if pressure is being applied to the touch screen is now missing a ! (not), so events are no longer being reported correctly. The original source code for this line was as follows: #define UCP(x) ((unsigned char*)(x)) #define UCOM(x,y,z) ((UCP((x)->transfer_buffer)[y]) & (z)) ... if (!UCOM(urb, 7, 0x20)) { And was cleaned to: unsigned char *data = urb->transfer_buffer; .... if (data[7] & 0x20) { (note the lack of '!') This has been tested on an LG L1510BF and an LG1510SF touch screen. Signed-off-by:Mark Assad <massad@gmail.com> Signed-off-by:
-
Linus Torvalds authored
* master.kernel.org:/pub/scm/linux/kernel/git/willy/parisc-2.6: [PA-RISC] Fix time.c for new do_timer() calling convention [PA-RISC] Fix must_check warnings in drivers.c [PA-RISC] Fix parisc_newuname() [PA-RISC] Remove warning from pci.c [PA-RISC] Fix filldir warnings [PA-RISC] Fix sys32_sysctl [PA-RISC] Fix sba_iommu compilation
-
git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpcLinus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc: [POWERPC] cell: fix bugs found by sparse [POWERPC] spiderpic: enable new style devtree support [POWERPC] Update cell_defconfig [POWERPC] spufs: add infrastructure for finding elf objects [POWERPC] spufs: support new OF device tree format [POWERPC] spufs: add support for read/write on cntl [POWERPC] spufs: remove support for ancient firmware [POWERPC] spufs: make mailbox functions handle multiple elements [POWERPC] spufs: use correct pg_prot for mapping SPU local store [POWERPC] spufs: Add infrastructure needed for gang scheduling [POWERPC] spufs: implement error event delivery to user space [POWERPC] spufs: fix context switch during page fault [POWERPC] spufs: scheduler support for NUMA. [POWERPC] spufs: cell spu problem state mapping updates
-
Linus Torvalds authored
* master.kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: (54 commits) [SCSI] Initial Commit of qla4xxx [SCSI] raid class: handle component-add errors [SCSI] SCSI megaraid_sas: handle thrown errors [SCSI] SCSI aic94xx: handle sysfs errors [SCSI] SCSI st: fix error handling in module init, sysfs [SCSI] SCSI sd: fix module init/exit error handling [SCSI] SCSI osst: add error handling to module init, sysfs [SCSI] scsi: remove hosts.h [SCSI] scsi: Scsi_Cmnd convertion in aic7xxx_old.c [SCSI] megaraid_sas: sets ioctl timeout and updates version,changelog [SCSI] megaraid_sas: adds tasklet for cmd completion [SCSI] megaraid_sas: prints pending cmds before setting hw_crit_error [SCSI] megaraid_sas: function pointer for disable interrupt [SCSI] megaraid_sas: frame count optimization [SCSI] megaraid_sas: FW transition and q size changes [SCSI] qla2xxx: Update version number to 8.01.07-k2. [SCSI] qla2xxx: S...
-
Matthew Wilcox authored
do_timer now wants to know how many ticks have elapsed. Now that we have to calculate that, we can eliminate some of the clever code that avoided having to calculate that. Also add some more documentation. I'd like to thank Grant Grundler for helping me with this. Signed-off-by:Matthew Wilcox <willy@parisc-linux.org>
-
Matthew Wilcox authored
Panic if we can't register the parisc bus or the root parisc device. There's no way we can boot without them, so let the user know ASAP. If we can't register a parisc device, handle the failure gracefully. Signed-off-by: -
Matthew Wilcox authored
The utsname virtualisation broke parisc_newuname compilation. Rewrite the implementation to call sys_newuname() like sparc64 does. Signed-off-by: -
Matthew Wilcox authored
max() doesn't like comparing an unsigned long and a resource_size_t, so make the local variables resource_size_t too. Signed-off-by: -
Matthew Wilcox authored
filldir_t now takes a u64, not an ino_t. Signed-off-by:Matthew Wilcox <matthew@wil.cx>
-
Matthew Wilcox authored
When CONFIG_SYSCTL_SYSCALL isn't defined, do_sysctl doesn't exist and we fail to link. Fix with an ifdef, the same way sparc64 did. Also add some minor changes to be more like sparc64. Signed-off-by: -
Matthew Wilcox authored
klist_iter_exit() only takes one parameter. Also fix warning by adding additional brackets. Signed-off-by: -
Arnd Bergmann authored
- Some long constants should be marked 'ul'. - When using desc->handler_data to pass an __iomem register area, we need to add casts to and from __iomem. Signed-off-by:
Arnd Bergmann <arnd.bergmann@de.ibm.com> Signed-off-by:
Paul Mackerras <paulus@samba.org>
-
Arnd Bergmann authored
This enables support for new firmware test releases. Signed-off-by:
-
Arnd Bergmann authored
This adds defaults for new configuration options added since 2.6.18 and it enables the option for 64kb pages by default. Signed-off-by:
-
Arnd Bergmann authored
This adds an 'object-id' file that the spe library can use to store a pointer to its ELF object. This was originally meant for use by oprofile, but is now also used by the GNU debugger, if available. In order for oprofile to find the location in an spu-elf binary where an event counter triggered, we need a way to identify the binary in the first place. Unfortunately, that binary itself can be embedded in a powerpc ELF binary. Since we can assume it is mapped into the effective address space of the running process, have that one write the pointer value into a new spufs file. When a context switch occurs, pass the user value to the profiler so that can look at the mapped file (with some care). Signed-off-by:
-
Arnd Bergmann authored
The properties we used traditionally in the device tree are somewhat nonstandard. This adds support for a more conventional format using 'interrupts' and 'reg' properties. The interrupts are specified in three cells (class 0, 1 and 2) and registered at the interrupt-parent. The reg property contains either three or four register areas in the order 'local-store', 'problem', 'priv2', and 'priv1', so the priv1 one can be left out in case of hypervisor driven systems that access these through hcalls. Signed-off-by:
-
