- Jul 10, 2022
-
-
Takashi Iwai authored
Merge tag 'asoc-fix-v5.19-rc4' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus ASoC: Fixes for v5.19 Quite a large batch due to things building up for a couple of weeks but all driver specific apart from Marek's documentation fix.
-
- Jul 08, 2022
-
-
Peter Ujfalusi authored
The struct nhlt_format's fmt_config is a flexible array, it must not be used as normal array. When moving to the next nhlt_fmt_cfg we need to take into account the data behind the ->config.caps (indicated by ->config.size). The logic of the code also changed: it is no longer saves the _last_ fmt_cfg for all found rates. Fixes: bc2bd45b ("ASoC: Intel: Skylake: Parse nhlt and register clock device") Signed-off-by:
Peter Ujfalusi <peter.ujfalusi@linux.intel.com> Reviewed-by:
Cezary Rojewski <cezary.rojewski@intel.com> Link: https://lore.kernel.org/r/20220630065638.11183-3-peter.ujfalusi@linux.intel.com Signed-off-by:
Mark Brown <broonie@kernel.org>
-
Peter Ujfalusi authored
The present flag is only set once when one rate has been found to be saved. This will effectively going to ignore any rate discovered at later time and based on the code, this is not the intention. Fixes: bc2bd45b ("ASoC: Intel: Skylake: Parse nhlt and register clock device") Signed-off-by:
-
Oder Chiou authored
The patch fixes the wrong state of JD1 and JD2 while the bst1 or bst2 is power on in the HDA JD using. Signed-off-by:
Oder Chiou <oder_chiou@realtek.com> Reported-by:
Sameer Pujar <spujar@nvidia.com> Link: https://lore.kernel.org/r/20220705101134.16792-1-oder_chiou@realtek.com Signed-off-by:
-
Brent Lu authored
Starting from ADL platform we have four HDMI PCM devices which exceeds the size of sof_hdmi array. Since each sof_hdmi_pcm structure represents one HDMI PCM device, we remove the sof_hdmi array and add a new member hdmi_jack to the sof_hdmi_pcm structure to fix the out-of-bounds problem. Signed-off-by:
Brent Lu <brent.lu@intel.com> Reviewed-by:
-
Jianglei Nie authored
q6apm_get_audioreach_graph() allocates a memory chunk for graph->graph with audioreach_alloc_graph_pkt(). When idr_alloc() fails, graph->graph is not released, which will lead to a memory leak. We can release the graph->graph with kfree() when idr_alloc() fails to fix the memory leak. Signed-off-by:
Jianglei Nie <niejianglei2021@163.com> Reviewed-by:
Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/20220629182520.2164409-1-niejianglei2021@163.com Signed-off-by:
-
Hector Martin authored
The register default is 0x28 per the datasheet, and the amp gain field is supposed to be shifted left by one. With the wrong default, the ALSA controls lie about the power-up state. With the wrong shift, we get only half the gain we expect. Signed-off-by:
Hector Martin <marcan@marcan.st> Fixes: 827ed8a0 ("ASoC: tas2764: Add the driver for the TAS2764") Signed-off-by:
Martin Povišer <povik+lin@cutebit.org> Link: https://lore.kernel.org/r/20220630075135.2221-4-povik+lin@cutebit.org Signed-off-by:
-
Hector Martin authored
DVC value 0xc8 is -100dB and 0xc9 is mute; this needs to map to -100.5dB as far as the dB scale is concerned. Fix that and enable the mute flag, so alsamixer correctly shows the control as <0 dB .. -100 dB, mute>. Signed-off-by:
-
Martin Povišer authored
Fix setting of FSYNC polarity in case of LEFT_J and DSP_A/B formats. Do NOT set the SCFG field as was previously done, because that is not correct and is also in conflict with the "ASI1 Source" control which sets the same SCFG field! Also add support for explicit polarity inversion. Fixes: 827ed8a0 ("ASoC: tas2764: Add the driver for the TAS2764") Signed-off-by:
-
Martin Povišer authored
Make sure there is at least 1 ms delay from reset to first command as is specified in the datasheet. This is a fix similar to commit 307f3145 ("ASoC: tas2770: Insert post reset delay"). Fixes: 827ed8a0 ("ASoC: tas2764: Add the driver for the TAS2764") Signed-off-by:
-
Bryan O'Donoghue authored
For the existing msm8916 bindings the minimum reg/reg-names is 1 not 2. Similarly the minimum interrupt/interrupt-names is 1 not 2. Fixes: f3fc4fbf ("ASoC: dt-bindings: Add SC7280 lpass cpu bindings") Signed-off-by:
Bryan O'Donoghue <bryan.odonoghue@linaro.org> Reviewed-by:
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20220629114012.3282945-1-bryan.odonoghue@linaro.org Signed-off-by:
-
Marek Vasut authored
Make sure all AC97 interface lines are spelled in capitals, to avoid confusing readers about where the 5th line is. Signed-off-by:
Marek Vasut <marex@denx.de> Cc: Mark Brown <broonie@kernel.org> Cc: Takashi Iwai <tiwai@suse.de> Link: https://lore.kernel.org/r/20220628165840.152235-1-marex@denx.de Signed-off-by:
-
Charles Keepax authored
Currently the function arizona_aif_cfg_changed uses the TX_BCLK_RATE, however this register is not used on wm8998. This was not noticed as previously snd_soc_component_read did not print an error message. However, now the log gets filled with error messages, further more the test for if the LRCLK changed will return spurious results. Update the code to use the RX_BCLK_RATE register, the LRCLK parameters are written to both registers and the RX_BCLK_RATE register is used across all Arizona devices. Signed-off-by:
Charles Keepax <ckeepax@opensource.cirrus.com> Link: https://lore.kernel.org/r/20220628153409.3266932-4-ckeepax@opensource.cirrus.com Signed-off-by:
-
Charles Keepax authored
cs47l92_put_demux returns the value of snd_soc_dapm_mux_update_power, which returns a 1 if a path was found for the kcontrol. This is obviously different to the expected return a 1 if the control was updated value. This results in spurious notifications to user-space. Update the handling to only return a 1 when the value is changed. Signed-off-by:
-
Charles Keepax authored
wm8998_inmux_put returns the value of snd_soc_dapm_mux_update_power, which returns a 1 if a path was found for the kcontrol. This is obviously different to the expected return a 1 if the control was updated value. This results in spurious notifications to user-space. Update the handling to only return a 1 when the value is changed. Signed-off-by:
-
Charles Keepax authored
The output compensation controls always returns zero regardless of if the control value was updated. This results in missing notifications to user-space of the control change. Update the handling to return 1 when the value is changed. Signed-off-by:
-
Yassine Oudjana authored
Currently slim_tx_mixer_get reports all TX mixers as enabled when at least one is, due to it reading the entire tx_port_value bitmask without testing the specific bit corresponding to a TX port. Furthermore, using the same bitmask for all capture DAIs makes setting one mixer affect them all. To prevent this, and since the SLIM TX muxes effectively only connect to one of the mixers at a time, turn tx_port_value into an int array storing the DAI index each of the ports is connected to. Signed-off-by:
Yassine Oudjana <y.oudjana@protonmail.com> Link: https://lore.kernel.org/r/20220622061745.35399-1-y.oudjana@protonmail.com Signed-off-by:
-
Sascha Hauer authored
The tx_mask check doesn't reflect what the driver and the chip support. The check currently checks for exactly two slots being enabled. The tlv320adcx140 supports anything between one and eight channels, so relax the check accordingly. The tlv320adcx140 supports arbitrary tx_mask settings, but the driver currently only supports adjacent slots beginning with the first slot, so extend the check to check that the first slot is being used and that there are no holes in the tx_mask. Leave a comment to make it's the driver that limits the tx_mask settings, not the chip itself. While at it remove the set-but-unused struct adcx140p_priv::tdm_delay field. Signed-off-by:
Sascha Hauer <s.hauer@pengutronix.de> Link: https://lore.kernel.org/r/20220624105716.2579539-1-s.hauer@pengutronix.de Signed-off-by:
-
Daniel Mack authored
max98396_dai_set_fmt() modifes register 2041 and touches bits in the mask 0x3a. Make sure to use the right mask for that operation. Signed-off-by:
Daniel Mack <daniel@zonque.org> Link: https://lore.kernel.org/r/20220624104712.1934484-7-daniel@zonque.org Signed-off-by:
-
David Owens authored
Convert to managed versions of sysfs and clk allocation to simplify unbinding and error handling in probe. Managed sysfs node creation specifically addresses the following error seen the second time probe is attempted after sdma_pcm_platform_register() previously requsted probe deferral: sysfs: cannot create duplicate filename '/devices/platform/68000000.ocp/49022000.mcbsp/max_tx_thres' Signed-off-by:
David Owens <dowens@precisionplanting.com> Link: https://lore.kernel.org/r/20220620183744.3176557-1-dowens@precisionplanting.com Signed-off-by:
-
Sascha Hauer authored
The example in audio-graph-card2.c has multiple nodes with the same name in it. Change the port numbers to get different names. Signed-off-by:
-
Francesco Dolcini authored
Put the SGTL5000 in a silent/safe state on shutdown/remove, this is required since the SGTL5000 produces a constant noise on its output after it is configured and its clock is removed. Without this change this is happening every time the module is unbound/removed or from reboot till the clock is enabled again. The issue was experienced on both a Toradex Colibri/Apalis iMX6, but can be easily reproduced everywhere just playing something on the codec and after that removing/unbinding the driver. Fixes: 9b34e6cc ("ASoC: Add Freescale SGTL5000 codec support") Signed-off-by:
Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by:
Fabio Estevam <festevam@denx.de> Link: https://lore.kernel.org/r/20220624101301.441314-1-francesco.dolcini@toradex.com Signed-off-by:
-
- Jul 05, 2022
-
-
Takashi Iwai authored
The previous cleanup with devres may lead to the incorrect release orders at the probe error handling due to the devres's nature. Until we register the card, snd_card_free() has to be called at first for releasing the stuff properly when the driver tries to manage and release the stuff via card->private_free(). This patch fixes it by calling snd_card_free() manually on the error from the probe callback. Fixes: 5bff69b3 ("ALSA: cs46xx: Allocate resources with device-managed APIs") Cc: <stable@vger.kernel.org> Reported-and-tested-by:
Jan Engelhardt <jengelh@inai.de> Link: https://lore.kernel.org/r/p2p1s96o-746-74p4-s95-61qo1p7782pn@vanv.qr Link: https://lore.kernel.org/r/20220705152336.350-1-tiwai@suse.de Signed-off-by:
Takashi Iwai <tiwai@suse.de>
-
- Jul 04, 2022
-
-
Takashi Iwai authored
Merge tag 'asoc-fix-v5.19-rc3' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus ASoC: Fixes for v5.19 A collection of fixes for v5.19, quite large but nothing major - a good chunk of it is more stuff that was identified by mixer-test regarding event generation.
-
Egor Vorontsov authored
The patch applies the same quirks used for SC-01 at firmware v1.1.0 to the ones running v1.0.0, with respect to hard-coded sample rates. I got two more units and successfully tested the patch series with both firmwares. The support is now complete (not accounting ASIO). Signed-off-by:
Egor Vorontsov <sdoregor@sdore.me> Link: https://lore.kernel.org/r/20220627100041.2861494-2-sdoregor@sdore.me Signed-off-by:
-
Egor Vorontsov authored
Fiero SC-01 is a USB sound card with two mono inputs and a single stereo output. The inputs are composed into a single stereo stream. The device uses a vendor-provided driver on Windows and does not work at all without it. The driver mostly provides ASIO functionality, but also alters the way the sound card is queried for sample rates and clocks. ALSA queries those failing with an EPIPE (same as Windows 10 does). Presumably, the vendor-provided driver does not query it at all, simply matching by VID:PID. Thus, I consider this a buggy firmware and adhere to a set of fixed endpoint quirks instead. The soundcard has an internal clock. Implicit feedback mode is required for the playback. I have updated my device to v1.1.0 from a Windows 10 VM using a vendor- provided binary prior to the development, hoping for it to just begin working. The device provides no obvious way to downgrade the firmware, and regardless, there's no binary available for v1.0.0 anyway. Thus, I will be getting another unit to extend the patch with support for that. Expected to be a simple copy-paste of the existing one, though. There were no previous reports of that device in context of Linux anywhere. Other issues have been reported though, but that's out of the scope. Signed-off-by:
-
Tim Crawford authored
Fixes headset detection on Clevo L140PU. Signed-off-by:
Tim Crawford <tcrawford@system76.com> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20220624144109.3957-1-tcrawford@system76.com Signed-off-by:
-
John Veness authored
Treat the claimed 96kHz 1ch in the descriptors as 48kHz 2ch, so that the audio stream doesn't sound mono. Also fix initial stream alignment, so that left and right channels are in the correct order. Signed-off-by:
John Veness <john-linux@pelago.org.uk> Link: https://lore.kernel.org/r/20220624140757.28758-1-john-linux@pelago.org.uk Signed-off-by:
-
- Jun 24, 2022
-
-
Charles Keepax authored
madera_adsp_rate_put always returns zero regardless of if the control value was updated. This results in missing notifications to user-space of the control change. Update the handling to return 1 when the value is changed. Signed-off-by:
-
Charles Keepax authored
madera_out1_demux_put returns the value of snd_soc_dapm_mux_update_power, which returns a 1 if a path was found for the kcontrol. This is obviously different to the expected return a 1 if the control was updated value. This results in spurious notifications to user-space. Update the handling to only return a 1 when the value is changed. Signed-off-by:
-
Charles Keepax authored
cs47l15_in1_adc_put always returns zero regardless of if the control value was updated. This results in missing notifications to user-space of the control change. Update the handling to return 1 when the value is changed. Signed-off-by:
-
Charles Keepax authored
The mixer controls for ASP TX3/4 are set to values that are not included in their enumeration control. This will cause spurious event notifications when the controls are first changed, as the register value changes whilst the actual visible enumeration value does not. Use the register patch to set them to a known value, zero, which equates to zero fill, thereby avoiding the spurious notifications. Signed-off-by:
-
Charles Keepax authored
DAPM keeps a copy of the current value of mux/demux controls, however this value is only initialised in the case of autodisable controls. This leads to false notification events when first modifying a DAPM kcontrol that has a non-zero default. Autodisable controls are left as they are, since they already initialise the value, and there would be more work required to support autodisable muxes where the first option isn't disabled and/or that isn't the default. Technically this issue could affect mixer/switch elements as well, although not on any of the devices I am currently running. There is also a little more work to do to address the issue there due to that side supporting stereo controls, so that has not been tackled in this patch. Signed-off-by:
-
Shuming Fan authored
The initial settings will be written before the codec probe function. But, the rt711->component doesn't be assigned yet. If IO error happened during initial settings operations, it will cause the kernel panic. This patch changed component->dev to slave->dev to fix this issue. Signed-off-by:
Shuming Fan <shumingf@realtek.com> Link: https://lore.kernel.org/r/20220621090719.30558-1-shumingf@realtek.com Signed-off-by:
-
Charles Keepax authored
Various boolean controls on cs35l41 are missing the required "Switch" in the name, add these. Signed-off-by:
-
Charles Keepax authored
The DRE controls on wm5110 should return a value of 1 if the DRE state is actually changed, update to fix this. Signed-off-by:
-
Charles Keepax authored
The preloader controls on ADSP should return a value of 1 if the preloader value was changed, update to correct this. Signed-off-by:
-
Srinivas Kandagatla authored
Update Banajit's email address from codeaurora.org to quicinc.com, as codeaurora.org is not in use anymore. Signed-off-by:
-
Judy Hsiao authored
We discoverd that the state of BCLK on, LRCLK off and SD_MODE on may cause the speaker melting issue. Removing LRCLK while BCLK is present can cause unexpected output behavior including a large DC output voltage as described in the Max98357a datasheet. In order to: 1. prevent BCLK from turning on by other component. 2. keep BCLK and LRCLK being present at the same time This patch switches BCLK to GPIO func before LRCLK output, and configures BCLK func back during LRCLK is output. Without this fix, BCLK is turned on 11 ms earlier than LRCK by the da7219. With this fix, BCLK is turned on only 0.4 ms earlier than LRCK by the rockchip codec. Signed-off-by:
Judy Hsiao <judyhsiao@chromium.org> Link: https://lore.kernel.org/r/20220615045643.3137287-1-judyhsiao@chromium.org Signed-off-by:
-
Pierre-Louis Bossart authored
The IMR was assumed to be preserved when suspending to S4 and S5 states, but community reports invalidate that assumption, the hardware seems to be powered off and the IMR memory content cleared. Make sure regular boot with firmware download is used for S4 and S5. BugLink: https://github.com/thesofproject/sof/issues/5892 Fixes: 5fb5f511 ("ASoC: SOF: Intel: hda-loader: add IMR restore support") Signed-off-by:
Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by:
Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Reviewed-by:
-
