- Feb 13, 2010
-
-
Yinghai Lu authored
Could save some buffer space instead of applying one by one. Could help that system that is going to use early_res instead of bootmem less entries in early_res make search more faster on system with more memory. Signed-off-by:
Yinghai Lu <yinghai@kernel.org> LKML-Reference: <1265793639-15071-18-git-send-email-yinghai@kernel.org> Signed-off-by:
H. Peter Anvin <hpa@zytor.com>
-
Yinghai Lu authored
Finally we can use early_res to replace bootmem for x86_64 now. Still can use CONFIG_NO_BOOTMEM to enable it or not. -v2: fix 32bit compiling about MAX_DMA32_PFN -v3: folded bug fix from LKML message below Signed-off-by:
-
- Feb 11, 2010
-
-
Yinghai Lu authored
64bit NUMA already make enough space under 4G with new early_node_mem. Signed-off-by:
-
Yinghai Lu authored
So we could put pgdata for the node high, and later sparse vmmap will get the section nr that need. With this patch will make <4 GB ram not use a sparse vmmap. before this patch, will get, before swiotlb try get bootmem [ 0.000000] nid=1 start=0 end=2080000 aligned=1 [ 0.000000] free [10 - 96] [ 0.000000] free [b12 - 1000] [ 0.000000] free [359f - 38a3] [ 0.000000] free [38b5 - 3a00] [ 0.000000] free [41e01 - 42000] [ 0.000000] free [73dde - 73e00] [ 0.000000] free [73fdd - 74000] [ 0.000000] free [741dd - 74200] [ 0.000000] free [743dd - 74400] [ 0.000000] free [745dd - 74600] [ 0.000000] free [747dd - 74800] [ 0.000000] free [749dd - 74a00] [ 0.000000] free [74bdd - 74c00] [ 0.000000] free [74ddd - 74e00] [ 0.000000] free [74fdd - 75000] [ 0.000000] free [751dd - 75200] [ 0.000000] free [753dd - 75400] [ 0.000000] free [755dd - 75600] [ 0.000000] free [757dd - 75800] [ 0.000000] free [759dd - 75a00] [ 0.000000] free [75bdd - 7bf5f] [ 0.000000] free [7f730 - 7f750] [ 0.000000] free [100000 - 2080000] [ 0.000000] total free 1f87170 [ 93.301474] Placing 64MB software IO TLB between ffff880075bdd000 - ffff880079bdd000 [ 93.311814] software IO TLB at phys 0x75bdd000 - 0x79bdd000 with this patch will get: before swiotlb try get bootmem [ 0.000000] nid=1 start=0 end=2080000 aligned=1 [ 0.000000] free [a - 96] [ 0.000000] free [702 - 1000] [ 0.000000] free [359f - 3600] [ 0.000000] free [37de - 3800] [ 0.000000] free [39dd - 3a00] [ 0.000000] free [3bdd - 3c00] [ 0.000000] free [3ddd - 3e00] [ 0.000000] free [3fdd - 4000] [ 0.000000] free [41dd - 4200] [ 0.000000] free [43dd - 4400] [ 0.000000] free [45dd - 4600] [ 0.000000] free [47dd - 4800] [ 0.000000] free [49dd - 4a00] [ 0.000000] free [4bdd - 4c00] [ 0.000000] free [4ddd - 4e00] [ 0.000000] free [4fdd - 5000] [ 0.000000] free [51dd - 5200] [ 0.000000] free [53dd - 5400] [ 0.000000] free [55dd - 7bf5f] [ 0.000000] free [7f730 - 7f750] [ 0.000000] free [100428 - 100600] [ 0.000000] free [13ea01 - 13ec00] [ 0.000000] free [170800 - 2080000] [ 0.000000] total free 1f87170 [ 92.689485] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 92.699799] Placing 64MB software IO TLB between ffff8800055dd000 - ffff8800095dd000 [ 92.710916] software IO TLB at phys 0x55dd000 - 0x95dd000 so will get enough space below 4G, aka pfn 0x100000 Signed-off-by:
-
Yinghai Lu authored
Use early_res_count to track the num, and use find_e820 to get a new buffer, then copy from the old to the new one. Also, clear early_res to prevent later invalid usage. -v2 _check_and_double_early_res should take new start Signed-off-by:
-
Yinghai Lu authored
To prepare allocate early res array from fine_e820_area. Signed-off-by:
-
Yinghai Lu authored
Simplify setup_node_mem: don't use bootmem from other node, instead just find_e820_area in early_node_mem. This keeps the boundary between early_res and boot mem more clear, and lets us only call early_res_to_bootmem() one time instead of for all nodes. Signed-off-by:
-
Yinghai Lu authored
So we can check that early in the bootlog. Signed-off-by:
Christoph Lameter <cl@linux-foundation.org> Signed-off-by:
-
Yinghai Lu authored
So make interface more consistent with early_res. Later we can share some code with early_res. Signed-off-by:
-
Yinghai Lu authored
Should be good for 32bit too. -v3: cast res->start -v4: according to Linus, to use %pR instead of cast Signed-off-by:
Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by:
-
Yinghai Lu authored
Prepare for 32bit pci root bus -v2: hpa said we should compare with (resource_size_t)~0 -v3: according to Linus to use MAX_RESOURCE instead. also need need to put related patches together -v4: according to Andrew, use min in cap_resource() Signed-off-by: -
Yinghai Lu authored
Prepare to enable it for 32bit. -v2: remove not needed cast Signed-off-by:
-
Yinghai Lu authored
Found MSI amd k8 based laptops is hiding [0x70000000, 0x80000000) RAM from e820. enable amd one chain even for all. -v2: use bool for found, according to Andrew Signed-off-by:
-
Yinghai Lu authored
Prepare to enable 32bit intel and amd bus. Signed-off-by:
-
Yinghai Lu authored
We have almost the same code for mtrr cleanup and amd_bus checkup, and this code will also be used in replacing bootmem with early_res, so try to move them together and reuse it from different parts. Also rename update_range to subtract_range as that is what the function is actually doing. -v2: update comments as Christoph requested Signed-off-by:
-
H. Peter Anvin authored
Rename add_range() to add_bus_range() to avoid conflict with the naming of the generic range manipulation functions. LKML-Reference: <1265793639-15071-4-git-send-email-yinghai@kernel.org> Cc: Yinghai Lu <yinghai@kernel.org> Cc: Jesse Barnes <jbarnes@virtuousgeek.org> Cc: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: -
H. Peter Anvin authored
-
- Feb 10, 2010
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/stagingLinus Torvalds authored
* 'i2c-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging: i2c-tiny-usb: Fix on big-endian systems
-
git://git390.marist.edu/pub/scm/linux-2.6Linus Torvalds authored
* 'for-linus' of git://git390.marist.edu/pub/scm/linux-2.6: [S390] Fix struct _lowcore layout. [S390] qdio: prevent call trace if CHPID is offline [S390] qdio: continue polling for buffer state ERROR
-
git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds authored
* 'kvm-updates/2.6.33' of git://git.kernel.org/pub/scm/virt/kvm/kvm: KVM: PIT: control word is write-only kvmclock: count total_sleep_time when updating guest clock Export the symbol of getboottime and mmonotonic_to_bootbased
-
git://git.kernel.org/pub/scm/linux/kernel/git/hskinnemoen/avr32-2.6Linus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/hskinnemoen/avr32-2.6: avr32: clean up memory allocation in at32_add_device_mci arch/avr32: Fix build failure for avr32 caused by typo
-
git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpcLinus Torvalds authored
* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: powerpc: Fix address masking bug in hpte_need_flush()
-
git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6Linus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6: cifs: fix dentry hash calculation for case-insensitive mounts [CIFS] Don't cache timestamps on utimes due to coarse granularity [CIFS] Maximum username length check in session setup does not match cifs: fix length calculation for converted unicode readdir names [CIFS] Add support for TCP_NODELAY
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (29 commits) drivers/net: Correct NULL test MAINTAINERS: networking drivers - Add git net-next tree net/sched: Fix module name in Kconfig cxgb3: fix GRO checksum check dst: call cond_resched() in dst_gc_task() netfilter: nf_conntrack: fix hash resizing with namespaces netfilter: xtables: compat out of scope fix netfilter: nf_conntrack: restrict runtime expect hashsize modifications netfilter: nf_conntrack: per netns nf_conntrack_cachep netfilter: nf_conntrack: fix memory corruption with multiple namespaces Bluetooth: Keep a copy of each HID device's report descriptor pktgen: Fix freezing problem igb: make certain to reassign legacy interrupt vectors after reset irda: add missing BKL in irnet_ppp ioctl irda: unbalanced lock_kernel in irnet_ppp ixgbe: Fix return of invalid txq ixgbe: Fix ixgbe_tx_map error path netxen: protect resource cleanup by rtnl lock netxen: fix tx timeout recovery for NX2031 chip Bluetooth: Enter active mode before establishing a SCO link. ...
-
David Gibson authored
Commit f71dc176 'Make hpte_need_flush() correctly mask for multiple page sizes' introduced bug, which is triggered when a kernel with a 64k base page size is run on a system whose hardware does not 64k hash PTEs. In this case, we emulate 64k pages with multiple 4k hash PTEs, however in hpte_need_flush() we incorrectly only mask the hardware page size from the address, instead of the logical page size. This causes things to go wrong when we later attempt to iterate through the hardware subpages of the logical page. This patch corrects the error. It has been tested on pSeries bare metal by Michael Neuling. Signed-off-by:
David Gibson <dwg@au1.ibm.com> Signed-off-by:
Benjamin Herrenschmidt <benh@kernel.crashing.org>
-
git://neil.brown.name/mdLinus Torvalds authored
* 'for-linus' of git://neil.brown.name/md: md: fix some lockdep issues between md and sysfs. md: fix 'degraded' calculation when starting a reshape.
-
NeilBrown authored
====== This fix is related to http://bugzilla.kernel.org/show_bug.cgi?id=15142 but does not address that exact issue. ====== sysfs does like attributes being removed while they are being accessed (i.e. read or written) and waits for the access to complete. As accessing some md attributes takes the same lock that is held while removing those attributes a deadlock can occur. This patch addresses 3 issues in md that could lead to this deadlock. Two relate to calling flush_scheduled_work while the lock is held. This is probably a bad idea in general and as we use schedule_work to delete various sysfs objects it is particularly bad. In one case flush_scheduled_work is called from md_alloc (called by md_probe) called from do_md_run which holds the lock. This call is only present to ensure that ->gendisk is set. However we can be sure that gendisk is always set (though possibly we couldn't when that code was originally written. This is because do_md_run is called in three different contexts: 1/ from md_ioctl. This requires that md_open has succeeded, and it fails if ->gendisk is not set. 2/ from writing a sysfs attribute. This can only happen if the mddev has been registered in sysfs which happens in md_alloc after ->gendisk has been set. 3/ from autorun_array which is only called by autorun_devices, which checks for ->gendisk to be set before calling autorun_array. So the call to md_probe in do_md_run can be removed, and the check on ->gendisk can also go. In the other case flush_scheduled_work is being called in do_md_stop, purportedly to wait for all md_delayed_delete calls (which delete the component rdevs) to complete. However there really isn't any need to wait for them - they have already been disconnected in all important ways. The third issue is that raid5->stop() removes some attribute names while the lock is held. There is already some infrastructure in place to delay attribute removal until after the lock is released (using schedule_work). So extend that infrastructure to remove the raid5_attrs_group. This does not address all lockdep issues related to the sysfs "s_active" lock. The rest can be address by splitting that lockdep context between symlinks and non-symlinks which hopefully will happen. Signed-off-by:NeilBrown <neilb@suse.de>
-
git://git.kernel.org/pub/scm/linux/kernel/git/ericvh/v9fsLinus Torvalds authored
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ericvh/v9fs: 9p: fix p9_client_destroy unconditional calling v9fs_put_trans 9p: fix memory leak in v9fs_parse_options() 9p: Fix the kernel crash on a failed mount 9p: fix option parsing 9p: Include fsync support for 9p client net/9p: fix statsize inside twstat net/9p: fail when user specifies a transport which we can't find net/9p: fix virtio transport to correctly update status on connect
-
Marcelo Tosatti authored
PIT control word (address 0x43) is write-only, reads are undefined. Cc: stable@kernel.org Signed-off-by:Marcelo Tosatti <mtosatti@redhat.com>
-
Jason Wang authored
Current kvm wallclock does not consider the total_sleep_time which could cause wrong wallclock in guest after host suspend/resume. This patch solve this issue by counting total_sleep_time to get the correct host boot time. Cc: stable@kernel.org Signed-off-by:
Jason Wang <jasowang@redhat.com> Acked-by:
Glauber Costa <glommer@redhat.com> Signed-off-by:
-
Jason Wang authored
Export getboottime and monotonic_to_bootbased in order to let them could be used by following patch. Cc: stable@kernel.org Signed-off-by:
-
- Feb 09, 2010
-
-
Heiko Carstens authored
Offsets and sizes are wrong for 32 bit. Got broken with 866ba284 "[S390] cleanup lowcore.h". Reported-by:
Mahesh Salgaonkar <mahesh@linux.vnet.ibm.com> Signed-off-by:
Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by:
Martin Schwidefsky <schwidefsky@de.ibm.com>
-
Jan Glauber authored
If a CHPID is offline during a device shutdown the ccw_device_halt|clear may fail and the qdio device stays in state STOPPED until the shutdown is finished. If an interrupt occurs before the device is set to INACTIVE the STOPPED state triggers a WARN_ON in the interrupt handler. Prevent this WARN_ON by catching the STOPPED state in the interrupt handler. Signed-off-by:
Jan Glauber <jang@linux.vnet.ibm.com> Signed-off-by:
-
Ursula Braun authored
Inbound traffic handling may hang if next buffer to check is in state ERROR, polling is stopped and the final check for further available inbound buffers disregards buffers in state ERROR. This patch includes state ERROR when checking availability of more inbound buffers. Cc: Jan Glauber <jang@linux.vnet.ibm.com> Signed-off-by:
Ursula Braun <ursula.braun@de.ibm.com> Signed-off-by:
-
-
Julia Lawall authored
Test the value that was just allocated rather than the previously tested one. A simplified version of the semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/ ) // <smpl> @r@ expression *x; expression e; identifier l; @@ if (x == NULL || ...) { ... when forall return ...; } ... when != goto l; when != x = e when != &x *x == NULL // </smpl> Signed-off-by:
Julia Lawall <julia@diku.dk> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Joe Perches authored
During the rc period, patches that are not bugfixes should be done using the net-next tree. Signed-off-by:
Joe Perches <joe@perches.com> Signed-off-by:
-
Jan Luebbe authored
The action modules have been prefixed with 'act_', but the Kconfig description was not changed. Signed-off-by:
Jan Luebbe <jluebbe@debian.org> Acked-by:
Jamal Hadi Salim <hadi@cyberus.ca> Signed-off-by:
-
Divy Le Ray authored
Verify the HW checksum state for frames handed to GRO processing. Signed-off-by:
Divy Le Ray <divy@chelsio.com> Signed-off-by:
-
NeilBrown authored
This code was written long ago when it was not possible to reshape a degraded array. Now it is so the current level of degraded-ness needs to be taken in to account. Also newly addded devices should only reduce degradedness if they are deemed to be in-sync. In particular, if you convert a RAID5 to a RAID6, and increase the number of devices at the same time, then the 5->6 conversion will make the array degraded so the current code will produce a wrong value for 'degraded' - "-1" to be precise. If the reshape runs to completion end_reshape will calculate a correct new value for 'degraded', but if a device fails during the reshape an incorrect decision might be made based on the incorrect value of "degraded". This patch is suitable for 2.6.32-stable and if they are still open, 2.6.31-stable and 2.6.30-stable as well. Cc: stable@kernel.org Reported-by:
Michael Evans <mjevans1983@gmail.com> Signed-off-by:
-
