- Mar 04, 2024
-
-
David Sterba authored
The check_committed_ref() helper looks up an extent item by a key, allowing to do an inexact search when key->offset is -1. It's never expected to find such item, as it would break the allowed range of a extent item offset. Reviewed-by:
Josef Bacik <josef@toxicpanda.com> Reviewed-by:
Anand Jain <anand.jain@oracle.com> Signed-off-by:
David Sterba <dsterba@suse.com>
-
David Sterba authored
The unhandled case in btrfs_relocate_sys_chunks() loop is a corruption, as it could be caused only by two impossible conditions: - at first the search key is set up to look for a chunk tree item, with offset -1, this is an inexact search and the key->offset will contain the correct offset upon a successful search, a valid chunk tree item cannot have an offset -1 - after first successful search, the found_key corresponds to a chunk item, the offset is decremented by 1 before the next loop, it's impossible to find a chunk item there due to alignment and size constraints Reviewed-by:
-
David Sterba authored
The btrfs_init_root_free_objectid() looks up a root by a key, allowing to do an inexact search when key->offset is -1. It's never expected to find such item, as it would break the allowed range of a root id. Reviewed-by:
-
David Sterba authored
The btrfs_find_root() looks up a root by a key, allowing to do an inexact search when key->offset is -1. It's never expected to find such item, as it would break allowed the range of a root id. Reviewed-by:
-
David Sterba authored
We're deleting a root and looking it up by key does not succeed, this is an inconsistent state and we can't do anything. All callers handle errors and abort a transaction. Reviewed-by:
-
David Sterba authored
The unlikely case of lookup error in btrfs_remove_block_group() can be handled properly, in its caller this would lead to a transaction abort. We can't do anything else, a block group must have been loaded first. Reviewed-by:
-
David Sterba authored
Turn a BUG_ON to a properly handled error and update the error message in the caller. It is expected that @em_in and @start passed to btrfs_add_extent_mapping() overlap. Besides tests, the only caller btrfs_get_extent() makes sure this is true. Reviewed-by:
-
David Sterba authored
The helper btrfs_may_delete() is a copy of generic fs/namei.c:may_delete() to verify various conditions before deletion. There's a BUG_ON added before linux.git started, we can turn it to a proper error handling at least in our local helper. A mistmatch between directory and the deleted dentry is clearly invalid. This won't be probably ever hit due to the way how the parameters are set from the caller btrfs_ioctl_snap_destroy(), using a VFS helper lookup_one(). Reviewed-by:
-
Naohiro Aota authored
Since we can read/modify the value from the sysfs interface concurrently, it would be better to protect it from compiler optimizations. Currently, there is only one read policy BTRFS_READ_POLICY_PID available, so no actual problem can happen now. This is a preparation for the future expansion. Reviewed-by:
Naohiro Aota <naohiro.aota@wdc.com> Reviewed-by:
-
Filipe Manana authored
When logging an inode and we require to copy items from subvolume leaves to the log tree, we clone each subvolume leaf and than use that clone to copy items to the log tree. This is required to avoid possible deadlocks as stated in commit 796787c9 ("btrfs: do not modify log tree while holding a leaf from fs tree locked"). The cloning requires allocating an extent buffer (struct extent_buffer) and then allocating pages (folios) to attach to the extent buffer. This may be slow in case we are under memory pressure, and since we are doing the cloning while holding a read lock on a subvolume leaf, it means we can be blocking other operations on that leaf for significant periods of time, which can increase latency on operations like creating other files, renaming files, etc. Similarly because we're under a log transaction, we may also cause extra delay on other tasks doing an fsync, because syncing the log requires waiting for tasks that joined a log transaction to exit the transaction. So to improve this, for any inode logging operation that needs to copy items from a subvolume leaf ("full sync" or "copy everything" bit set in the inode), preallocate a dummy extent buffer before locking any extent buffer from the subvolume tree, and even before joining a log transaction, add it to the log context and then use it when we need to copy items from a subvolume leaf to the log tree. This avoids making other operations get extra latency when waiting to lock a subvolume leaf that is used during inode logging and we are under heavy memory pressure. The following test script with bonnie++ was used to test this: $ cat test.sh #!/bin/bash DEV=/dev/sdh MNT=/mnt/sdh MOUNT_OPTIONS="-o ssd" MEMTOTAL_BYTES=`free -b | grep Mem: | awk '{ print $2 }'` NR_DIRECTORIES=20 NR_FILES=20480 DATASET_SIZE=$((MEMTOTAL_BYTES * 2 / 1048576)) DIRECTORY_SIZE=$((MEMTOTAL_BYTES * 2 / NR_FILES)) NR_FILES=$((NR_FILES / 1024)) echo "performance" | \ tee /sys/devices/system/cpu/cpu*/cpufreq/scaling_governor umount $DEV &> /dev/null mkfs.btrfs -f $MKFS_OPTIONS $DEV mount $MOUNT_OPTIONS $DEV $MNT bonnie++ -u root -d $MNT \ -n $NR_FILES:$DIRECTORY_SIZE:$DIRECTORY_SIZE:$NR_DIRECTORIES \ -r 0 -s $DATASET_SIZE -b umount $MNT The results of this test on a 8G VM running a non-debug kernel (Debian's default kernel config), were the following. Before this change: Version 2.00a ------Sequential Output------ --Sequential Input- --Random- -Per Chr- --Block-- -Rewrite- -Per Chr- --Block-- --Seeks-- Name:Size etc /sec %CP /sec %CP /sec %CP /sec %CP /sec %CP /sec %CP debian0 7501M 376k 99 1.4g 96 117m 14 1510k 99 2.5g 95 +++++ +++ Latency 35068us 24976us 2944ms 30725us 71770us 26152us Version 2.00a ------Sequential Create------ --------Random Create-------- debian0 -Create-- --Read--- -Delete-- -Create-- --Read--- -Delete-- files:max:min /sec %CP /sec %CP /sec %CP /sec %CP /sec %CP /sec %CP 20:384100:384100/20 20480 32 20480 58 20480 48 20480 39 20480 56 20480 61 Latency 411ms 11914us 119ms 617ms 10296us 110ms After this change: Version 2.00a ------Sequential Output------ --Sequential Input- --Random- -Per Chr- --Block-- -Rewrite- -Per Chr- --Block-- --Seeks-- Name:Size etc /sec %CP /sec %CP /sec %CP /sec %CP /sec %CP /sec %CP debian0 7501M 375k 99 1.4g 97 117m 14 1546k 99 2.3g 98 +++++ +++ Latency 35975us 20945us 2144ms 10297us 2217us 6004us Version 2.00a ------Sequential Create------ --------Random Create-------- debian0 -Create-- --Read--- -Delete-- -Create-- --Read--- -Delete-- files:max:min /sec %CP /sec %CP /sec %CP /sec %CP /sec %CP /sec %CP 20:384100:384100/20 20480 35 20480 58 20480 48 20480 40 20480 57 20480 59 Latency 320ms 11237us 77779us 518ms 6470us 86389us Reviewed-by:
Filipe Manana <fdmanana@suse.com> Reviewed-by:
-
Filipe Manana authored
At btrfs_delete_unused_bgs(), the use of the list_is_singular() check on a block group may not be immediately obvious. It is there to prevent losing raid profile information for a block group type (data, metadata or system), as that information is removed from fs_info->avail_[data|metadata|system]_alloc_bits when the last block group of a given type is deleted. So deleting the block group would later result in creating block groups of that type with a single profile (because fs_info->avail_*_alloc_bits would have a value of 0). This check was added in commit aefbe9a6 ("btrfs: Fix lost-data-profile caused by auto removing bg"). So add a comment mentioning the need for the check. Reviewed-by:
Johannes Thumshirn <johannes.thumshirn@wdc.com> Reviewed-by:
Boris Burkov <boris@bur.io> Signed-off-by:
-
Filipe Manana authored
Add some comments to struct btrfs_fs_info to explicitly document which members are protected by the spinlock unused_bgs_lock. It is currently used to protect two linked lists, the reclaim_bgs and unused_bgs lists. So add an explicit comment on top of each list to mention its protected by unused_bgs_lock, as well as comment on top of unused_bgs_lock to mention the lists it protects. Reviewed-by:
-
David Sterba authored
This helper is used in transaction abort or cleanup context and the callers cannot handle all errors, only do best effort. btrfs_cleanup_one_transaction btrfs_destroy_delayed_refs btrfs_error_unpin_extent_range btrfs_destroy_pinned_extent btrfs_error_unpin_extent_range Signed-off-by: -
David Sterba authored
Handle the lookup failure of the block group to unpin, this is a logic error as the block group must exist at this point. If not, something else must have freed it, like clean_pinned_extents() would do without locking the unused_bg_unpin_mutex. Push the errors to the callers, proper handling will be done in followup patches. Signed-off-by: -
David Sterba authored
We've had numerous attempts to let function unpin_extent_cache() return void as it only returns 0. There are still error cases to handle so do that, in addition to the verbose messages. The only caller btrfs_finish_one_ordered() will now abort the transaction, previously it let it continue which could lead to further problems. Signed-off-by: -
Colin Ian King authored
There is a spelling mistake in a warning message. Fix it. Signed-off-by:
Colin Ian King <colin.i.king@gmail.com> Reviewed-by:
-
Qu Wenruo authored
Note: this is a fixed version that was previously reverted as e01a83e1 ("Revert "btrfs: zstd: fix and simplify the inline extent decompression""), with fixed parameters to memzero_page(). [BUG] If we have a filesystem with 4k sectorsize, and an inlined compressed extent created like this: item 4 key (257 INODE_ITEM 0) itemoff 15863 itemsize 160 generation 8 transid 8 size 4096 nbytes 4096 block group 0 mode 100600 links 1 uid 0 gid 0 rdev 0 sequence 1 flags 0x0(none) item 5 key (257 INODE_REF 256) itemoff 15839 itemsize 24 index 2 namelen 14 name: source_inlined item 6 key (257 EXTENT_DATA 0) itemoff 15770 itemsize 69 generation 8 type 0 (inline) inline extent data size 48 ram_bytes 4096 compression 3 (zstd) Then trying to reflink that extent in an aarch64 system with 64K page size, the reflink would just fail: # xfs_io -f -c "reflink $mnt/source_inlined 0 60k 4k" $mnt/dest XFS_IOC_CLONE_RANGE: Input/output error [CAUSE] In zstd_decompress(), we didn't treat @start_byte as just a page offset, but also use it as an indicator on whether we should error out, without any proper explanation (this is copied from other decompression code). In reality, for subpage cases, although @start_byte can be non-zero, we should never switch input/output buffer nor error out, since the whole input/output buffer should never exceed one sector, thus we should not need to do any buffer switch. Thus the current code using @start_byte as a condition to switch input/output buffer or finish the decompression is completely incorrect. [FIX] The fix involves several modification: - Rename @start_byte to @dest_pgoff to properly express its meaning - Use @sectorsize other than PAGE_SIZE to properly initialize the output buffer size - Use correct destination offset inside the destination page - Simplify the main loop Since the input/output buffer should never switch, we only need one zstd_decompress_stream() call. - Consider early end as an error After the fix, even on 64K page sized aarch64, above reflink now works as expected: # xfs_io -f -c "reflink $mnt/source_inlined 0 60k 4k" $mnt/dest linked 4096/4096 bytes at offset 61440 And results the correct file layout: item 9 key (258 INODE_ITEM 0) itemoff 15542 itemsize 160 generation 10 transid 10 size 65536 nbytes 4096 block group 0 mode 100600 links 1 uid 0 gid 0 rdev 0 sequence 1 flags 0x0(none) item 10 key (258 INODE_REF 256) itemoff 15528 itemsize 14 index 3 namelen 4 name: dest item 11 key (258 XATTR_ITEM 3817753667) itemoff 15445 itemsize 83 location key (0 UNKNOWN.0 0) type XATTR transid 10 data_len 37 name_len 16 name: security.selinux data unconfined_u:object_r:unlabeled_t:s0 item 12 key (258 EXTENT_DATA 61440) itemoff 15392 itemsize 53 generation 10 type 1 (regular) extent data disk byte 13631488 nr 4096 extent data offset 0 nr 4096 ram 4096 extent compression 0 (none) Signed-off-by:
Qu Wenruo <wqu@suse.com> Reviewed-by:
-
David Sterba authored
With help of neovim, LSP and clangd we can identify header files that are not actually needed to be included in the .c files. This is focused only on removal (with minor fixups), further cleanups are possible but will require doing the header files properly with forward declarations, minimized includes and include-what-you-use care. Reviewed-by:
-
David Sterba authored
The block size calculated by i_blocksize from inode is the same as what we have in fs_info, initalized in inode_init_always(). Unify that to use the fs_info value everywhere. Reviewed-by:
-
David Sterba authored
The block size stored in the super block is used by subsystems outside of btrfs and it's a copy of fs_info::sectorsize. Unify that to always use our sectorsize, with the exception of mount where we first need to use fixed values (4K) until we read the super block and can set the sectorsize. Replace all uses, in most cases it's fewer pointer indirections. Reviewed-by:
-
Johannes Thumshirn authored
Remove the duplicate physical recording of the original write physical address in case of a single device write. This duplicated code is most likely present due to a rebase error. Reviewed-by:
-
Goldwyn Rodrigues authored
Convert use of struct page to struct folio inside btrfs_truncate_block(). The only page based function is set_page_extent_mapped(). All other functions have folio equivalents. Had to use __filemap_get_folio() because filemap_grab_folio() does not allow passing allocation mask as a parameter. Signed-off-by:
Goldwyn Rodrigues <rgoldwyn@suse.com> Reviewed-by:
-
Matthew Wilcox (Oracle) authored
Remove more hidden calls to compound_head() by using an array of folios instead of pages. Also neaten the error path in defrag_one_range() by adjusting the length of the array instead of checking for NULL. Reviewed-by:
Matthew Wilcox (Oracle) <willy@infradead.org> Reviewed-by:
-
Matthew Wilcox (Oracle) authored
Use a folio throughout defrag_prepare_one_page() to remove dozens of hidden calls to compound_head(). There is no support here for large folios; indeed, turn the existing check for PageCompound into a check for large folios. Reviewed-by:
-
Matthew Wilcox (Oracle) authored
Turn set_page_extent_mapped() into a wrapper around this version. Saves a call to compound_head() for callers who already have a folio and removes a couple of users of page->mapping. Reviewed-by:
-
Josef Bacik authored
fstests looks for WARN_ON's in dmesg. Add WARN_ON_ONCE() to our leak detection code (enabled only in debug builds) so that fstests will fail if these things trip at all. This will allow us to easily catch problems with our reference counting that may otherwise go unnoticed. Reviewed-by:
Neal Gompa <neal@gompa.dev> Reviewed-by:
-
Filipe Manana authored
There's no need to do a forward declaration of struct extent_map_tree at extent_io.h, as there are no function prototypes, inline functions or data structures that refer to struct extent_map_tree. So remove that forward declaration, which is not needed since commit 477a30ba ("btrfs: Sink extent_tree arguments in try_release_extent_mapping"). Signed-off-by:
-
Qu Wenruo authored
After the conversion to folio interfaces (but without the patch to enable larger folio allocation), there is an LTP report about observable performance drop on metadata heavy operations. https://lore.kernel.org/linux-btrfs/202312221750.571925bd-oliver.sang@intel.com/ This drop is caused by the extra code of calculating the folio_size()/folio_shift(), instead of the old hard coded PAGE_SIZE/PAGE_SHIFT. To slightly reduce the overhead, just cache both folio_size and folio_shift in extent_buffer. The two new members (u32 folio_size and u8 folio_shift) are stored inside the holes of extent_buffer. folio_size is shared with len, which is reduced to u32. The size of eb does not change. Signed-off-by:
-
Qu Wenruo authored
The variable @bio_offset was introduced in commit 7ffd27e3 ("btrfs: pass bio_offset to check_data_csum() directly"), when we are still using the same endio function for both data and metadata. Later we had several changes to data and metadata endio functions: - Data verification is handled by btrfs bio layer - Split data and metadata endio paths Now for data path we no longer do any verification in end_bbio_data_read(), as the verification is handled by btrfs bio layer already. Thus there is no need for such bio_offset variable. Reviewed-by:
-
Qu Wenruo authored
The parameter @pg_offset of btrfs_get_extent() is only utilized for inlined extent, and we already have an ASSERT() and tree-checker, to make sure we can only get inline extent at file offset 0. Any invalid inline extent with non-zero file offset would be rejected by tree-checker in the first place. Thus the @pg_offset parameter is not really necessary, just remove it. Signed-off-by:
-
Linus Torvalds authored
-
git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phyLinus Torvalds authored
Pull phy fixes from Vinod Koul: - qcom: m31 pointer err fix, eusb2 fix redundant zero-out loop and v3 offset fix on qmp-usb - freescale: fix for dphy alias * tag 'phy-fixes2-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy: phy: qcom-qmp-usb: fix v3 offsets data phy: qualcomm: eusb2-repeater: Rework init to drop redundant zero-out loop phy: qcom: phy-qcom-m31: fix wrong pointer pass to PTR_ERR() phy: freescale: phy-fsl-imx8-mipi-dphy: Fix alias name to use dashes -
git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengineLinus Torvalds authored
Pull dmaengine fixes from Vinod Koul: - dw-edma fixes to improve driver and remote HDMA setup - fsl-edma fixes for SoC hange, irq init and byte calculations and sparse fixes - idxd: safe user copy of completion record fix - ptdma: consistent DMA mask fix * tag 'dmaengine-fix2-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine: dmaengine: ptdma: use consistent DMA masks dmaengine: fsl-qdma: add __iomem and struct in union to fix sparse warning dmaengine: idxd: Ensure safe user copy of completion record dmaengine: fsl-edma: correct max_segment_size setting dmaengine: idxd: Remove shadow Event Log head stored in idxd dmaengine: fsl-edma: correct calculation of 'nbytes' in multi-fifo scenario dmaengine: fsl-qdma: init irq after reg initialization dmaengine: fsl-qdma: fix SoC may hang on 16 byte unaligned read dmaengine: dw-edma: eDMA: Add sync read before starting the DMA transfer in remote setup dmaengine: dw-edma: HDMA: Add sync read before starting the DMA transfer in remote setup dmaengine: dw-edma: Add HDMA remote interrupt configuration dmaengine: dw-edma: HDMA_V0_REMOTEL_STOP_INT_EN typo fix dmaengine: dw-edma: Fix wrong interrupt bit set for HDMA dmaengine: dw-edma: Fix the ch_count hdma callback
-
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linuxLinus Torvalds authored
Pull powerpc fixes from Michael Ellerman: - Fix IOMMU table initialisation when doing kdump over SR-IOV - Fix incorrect RTAS function name for resetting TCE tables - Fix fpu_signal selftest failures since a recent change Thanks to Gaurav Batra and Nathan Lynch. * tag 'powerpc-6.8-5' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: selftests/powerpc: Fix fpu_signal failures powerpc/rtas: use correct function name for resetting TCE tables powerpc/pseries/iommu: IOMMU table is not initialized for kdump over SR-IOV
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86 fixes from Borislav Petkov: - Do not reserve SETUP_RNG_SEED setup data in the e820 map as it should be used by kexec only - Make sure MKTME feature detection happens at an earlier time in the boot process so that the physical address size supported by the CPU is properly corrected and MTRR masks are programmed properly, leading to TDX systems booting without disable_mtrr_cleanup on the cmdline - Make sure the different address sizes supported by the CPU are read out as early as possible * tag 'x86_urgent_for_v6.8_rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/e820: Don't reserve SETUP_RNG_SEED in e820 x86/cpu/intel: Detect TME keyid bits before setting MTRR mask registers x86/cpu: Allow reducing x86_phys_bits during early_identify_cpu()
-
- Mar 03, 2024
-
-
Linus Torvalds authored
Merge tag 'firewire-fixes-6.8-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394 Pull firewire fixes from Takashi Sakamoto: "A workaround to suppress the continuous bus resets in the case that older devices are connected to the modern 1394 OHCI hardware and devices In IEEE 1394 Amendment (IEEE 1394a-2000), the short bus reset is added to resolve the shortcomings of the long bus reset in IEEE 1394-1995. However, it is well-known that the solution is not necessarily effective in the mixing environment that both IEEE 1394-1995 PHY and IEEE 1394a-2000 (or later) PHY exist, as described in section 8.4.6.2 of IEEE 1394a-2000. The current implementation of firewire stack schedules the short bus reset when attempting to resolve the mismatch of gap count in the certain generation of bus topology. It can cause the continuous bus reset in the issued environment. The workaround simply uses the long bus reset instead of the short bus reset. It is desirable to detect whether the issued environment or not. However, the way to access PHY registers from remote note is firstly defined in IEEE 1394a-2000, thus it is not available in the case" * tag 'firewire-fixes-6.8-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394: firewire: core: use long bus reset on gap count error
-
git://git.kernel.org/pub/scm/fs/xfs/xfs-linuxLinus Torvalds authored
Pull xfs fix from Chandan Babu: "Drop experimental warning message when mounting an xfs filesystem on an fsdax device. We now consider xfs on fsdax to be stable" * tag 'xfs-6.8-fixes-4' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux: xfs: drop experimental warning for FSDAX
-
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linuxLinus Torvalds authored
Pull gpio fixes from Bartosz Golaszewski: - fix resource freeing ordering in error path when adding a GPIO chip - only set pins to output after the reset is complete in gpio-74x164 * tag 'gpio-fixes-for-v6.8-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: gpio: fix resource unwinding order in error path gpiolib: Fix the error path order in gpiochip_add_data_with_key() gpio: 74x164: Enable output pins after registers are reset
-
Ming Lei authored
In commit 19416123 ("block: define 'struct bvec_iter' as packed"), what we need is to save the 4byte padding, and avoid `bio` to spread on one extra cache line. It is enough to define it as '__packed __aligned(4)', as '__packed' alone means byte aligned, and can cause compiler to generate horrible code on architectures that don't support unaligned access in case that bvec_iter is embedded in other structures. Cc: Mikulas Patocka <mpatocka@redhat.com> Suggested-by:
Linus Torvalds <torvalds@linux-foundation.org> Fixes: 19416123 ("block: define 'struct bvec_iter' as packed") Signed-off-by:
Ming Lei <ming.lei@redhat.com> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds authored
Pull SCSI fixes from James Bottomley: "Two small fixes, all in drivers (the more obsolete mpt3sas and the newer mpi3mr)" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: mpt3sas: Prevent sending diag_reset when the controller is ready scsi: mpi3mr: Reduce stack usage in mpi3mr_refresh_sas_ports()
-
