- Jul 19, 2020
-
-
Vaibhav Gupta authored
With legacy PM, drivers themselves were responsible for managing the device's power states and takes care of register states. After upgrading to the generic structure, PCI core will take care of required tasks and drivers should do only device-specific operations. The driver was invoking PCI helper functions like pci_save/restore_state(), pci_enable/disable_device() and pci_set_power_state(), which is not recommended. Compile-tested only. [hverkuil: fixes checkpatch alignment warning] Signed-off-by:
Vaibhav Gupta <vaibhavgupta40@gmail.com> Signed-off-by:
Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by:
Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
-
Vaibhav Gupta authored
The .suspend() and .resume() callbacks are not defined for this driver. Still, their power management structure follows the legacy framework. To bring it under the generic framework, simply remove the binding of callbacks from struct "pci_driver". Compile-tested only. Signed-off-by:
-
Vaibhav Gupta authored
The .suspend() and .resume() callbacks are not defined for this driver. Still, their power management structure follows the legacy framework. To bring it under the generic framework, simply remove the binding of callbacks from struct "pci_driver". Compile-tested only. Signed-off-by:
-
Vaibhav Gupta authored
With legacy PM, drivers themselves were responsible for managing the device's power states and takes care of register states. After upgrading to the generic structure, PCI core will take care of required tasks and drivers should do only device-specific operations. Thus, there is no need to call the PCI helper functions like pci_enable_device(), pci_save/restore_sate(), etc. Compile-tested only. Signed-off-by:
-
Laurent Pinchart authored
The power-domains and resets properties are used in all DT sources in the kernel but are absent from the bindings. Document them and make them mandatory. Signed-off-by:
Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Reviewed-by:
Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by:
Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Acked-by:
Rob Herring <robh@kernel.org> Signed-off-by:
-
Laurent Pinchart authored
Convert the Renesas R-Car VSP1 text binding to YAML. Signed-off-by:
-
Laurent Pinchart authored
The resets property is used in DT sources in the kernel tree. Document it and make it mandatory. Signed-off-by:
-
Laurent Pinchart authored
All DT source files in the kernel tree specify the power-domains property. Make it mandatory. Signed-off-by:
-
Laurent Pinchart authored
Convert the Renesas R-Car FDP1 text binding to YAML. Signed-off-by:
-
Laurent Pinchart authored
The resets and iommus properties are used in DT sources in the kernel tree. Document them, and make resets mandatory. The iommus property is optional as not all platforms wire the FCP to a functional IOMMU. Signed-off-by:
-
Laurent Pinchart authored
All DT source files in the kernel tree specify the power-domains property. Make it mandatory. Signed-off-by:
-
Laurent Pinchart authored
Convert the Renesas R-Car FCP text binding to YAML. Signed-off-by:
-
Laurent Pinchart authored
When a notifier supplies a device fwnode and a subdev supplies an endpoint fwnode, incorrect matches may occur if multiple subdevs correspond to the same device fwnode. This can't be handled transparently in the framework, and requires the notifier to switch to endpoint fwnodes. Log a message to notify of this problem. A second message is added to help accelerating the transition to endpoint matching. Signed-off-by:
Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by:
Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Reviewed-by:
Jacopo Mondi <jacopo+renesas@jmondi.org> Tested-by:
Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by:
-
Laurent Pinchart authored
The notifier is useful to match functions to access information about the device matching a subdev. This will be used to print messages using the correct struct device and driver name. Signed-off-by:
-
Laurent Pinchart authored
fwnode matching was designed to match on nodes corresponding to a device. Some drivers, however, needed to match on endpoints, and have passed endpoint fwnodes to v4l2-async. This works when both the subdev and the notifier use the same fwnode types (endpoint or device), but makes drivers that use different types incompatible. Fix this by extending the fwnode match to handle fwnodes of different types. When the types (deduced from the presence of remote endpoints) are different, retrieve the device fwnode for the side that provides an endpoint fwnode, and compare it with the device fwnode provided by the other side. This allows interoperability between all drivers, regardless of which type of fwnode they use for matching. Signed-off-by:
-
Laurent Pinchart authored
Drivers may need to test if a fwnode is a graph endpoint. To avoid hand-written solutions that wouldn't work for all fwnode types, add a new fwnode_graph_is_endpoint() function for this purpose. We don't need to wire it up to different backends for OF and ACPI for now, as the implementation can simply be based on checkout the presence of a remote-endpoint property. Signed-off-by:
-
Jacopo Mondi authored
The RDACM20 is a GMSL camera supporting 1280x800 resolution images developed by IMI based on an Omnivision 10635 sensor and a Maxim MAX9271 GMSL serializer. The GMSL link carries power, control (I2C) and video data over a single coax cable. Signed-off-by:
-
Jacopo Mondi authored
The IMI RDACM20 and IMI RDACM21 are Gigabit Multimedia Serial Link (GMSL) camera capable of transmitting video and I2C control messages on a coax cable physical link for automotive applications. Document their device tree bindings. Signed-off-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by:
-
Kieran Bingham authored
The MAX9286 is a 4-channel GMSL deserializer with coax or STP input and CSI-2 output. The device supports multicamera streaming applications, and features the ability to synchronise the attached cameras. CSI-2 output can be configured with 1 to 4 lanes, and a control channel is supported over I2C, which implements an I2C mux to facilitate communications with connected cameras across the reverse control channel. Signed-off-by:
-
Laurent Pinchart authored
The MAX9286 deserializes video data received on up to 4 Gigabit Multimedia Serial Links (GMSL) and outputs them on a CSI-2 port using up to 4 data lanes. Signed-off-by:
-
Dongchun Zhu authored
Add a V4L2 sub-device driver for DW9768 voice coil motor, providing control to set the desired focus via IIC serial interface. Signed-off-by:
Dongchun Zhu <dongchun.zhu@mediatek.com> Reviewed-by:
Tomasz Figa <tfiga@chromium.org> Signed-off-by:
-
Dongchun Zhu authored
Add DeviceTree Binding Documentation for Dongwoon Anatech DW9768 voice coil actuator. Reviewed-by:
-
Andrey Konovalov authored
This fixes checkpatch warnings of "msleep < 20ms can sleep for up to 20ms". Signed-off-by:
Andrey Konovalov <andrey.konovalov@linaro.org> Signed-off-by:
-
Dafna Hirschfeld authored
Currently the 'pads' and 'pad_cfg' arrays of the rkisp1_resizer are of size 'RKISP1_ISP_PAD_MAX' which is 4. But the resizer has only two pads. Change the size of the arrays to 2 by adding and using 'RKISP1_RSZ_PAD_MAX' similar to the way it is done in the isp entity. [hverkuil: fix typos in commit log] Signed-off-by:
Dafna Hirschfeld <dafna.hirschfeld@collabora.com> Acked-by:
Helen Koike <helen.koike@collabora.com> Signed-off-by:
-
Dafna Hirschfeld authored
The field alloc_ctx in struct rkisp1_device is not used. This patch removes it. Signed-off-by:
-
Dafna Hirschfeld authored
The field ctrl_handler in struct rkisp1_device is not used. This patch removes it. Signed-off-by:
-
Dafna Hirschfeld authored
media: staging: rkisp1: cap: in stream start, replace calls to rkisp1_handle_buffer with rkisp1_set_next_buf The function 'rkisp1_stream_start' calls 'rkisp1_handle_buffer' in order to update the 'buf.curr' and 'buf.next' fields and configure the device before streaming starts. This cause a wrong increment of the debugs field 'frame_drop'. This patch replaces the call to 'rkisp1_handle_buffer' with a call to 'rkisp1_set_next_buf'. Signed-off-by:
-
Dafna Hirschfeld authored
The function 'rkisp1_set_next_buf' configures the registers according to 'cap->buf.next'. It is called after updating 'cap->buf.next' and 'cap->buf.curr'. This patch moves the code that updates those fields to rkisp1_set_next_buf. This is a preparation for later patch that change a call to 'rkisp1_handle_buffer' with a call to 'rkisp1_set_next_buf'. Signed-off-by:
-
Dafna Hirschfeld authored
The spinlock buf.lock should protect access to the buffers. This includes the buffers in buf.queue and also buf.curr and buf.next. The function 'rkisp1_set_next_buf' access buf.next therefore it should also be protected with the lock. Signed-off-by:
-
Dafna Hirschfeld authored
The function 'rkisp1_vb2_buf_queue' sets the next buffer directly in case the capture is already streaming but no frame yet arrived from the sensor. This is an optimization that tries to avoid dropping a frame. The call atomic_read(&cap->rkisp1->isp.frame_sequence) is used to check if a frame arrived. Reading the 'frame_sequence' should be avoided outside irq handlers to avoid race conditions. This patch removes this optimization. Dropping of the first frames can be avoided if userspace queues the buffers before start streaming. If userspace starts queueing buffers only after calling 'streamon' he risks frame drops anyway. Signed-off-by:
-
Lukas Bulwahn authored
Commit 7f52faab ("media: dt-bindings: Add ch7322 media i2c device") slipped in a typo in the CHRONTEL CH7322 CEC DRIVER section. Hence, ./scripts/get_maintainer.pl --self-test=patterns complains: warning: no file matches F: \ Documentation/devicetree/bindings/media/i2c/chontel,ch7322.yaml Fix the typo to address this warning. Signed-off-by:
Lukas Bulwahn <lukas.bulwahn@gmail.com> Signed-off-by:
-
Alexander A. Klimov authored
Rationale: Reduces attack surface on kernel devs opening the links for MITM as HTTPS traffic is much harder to manipulate. Deterministic algorithm: For each file: If not .svg: For each line: If doesn't contain `\bxmlns\b`: If neither `\bgnu\.org/license`, nor `\bmozilla\.org/MPL\b`: If both the HTTP and HTTPS versions return 200 OK and serve the same content: Replace HTTP with HTTPS. Signed-off-by:Alexander A. Klimov <grandmaster@al2klimov.de> Signed-off-by:
-
Alexander A. Klimov authored
Rationale: Reduces attack surface on kernel devs opening the links for MITM as HTTPS traffic is much harder to manipulate. Deterministic algorithm: For each file: If not .svg: For each line: If doesn't contain `\bxmlns\b`: If neither `\bgnu\.org/license`, nor `\bmozilla\.org/MPL\b`: If both the HTTP and HTTPS versions return 200 OK and serve the same content: Replace HTTP with HTTPS. Signed-off-by: -
Alexander A. Klimov authored
Rationale: Reduces attack surface on kernel devs opening the links for MITM as HTTPS traffic is much harder to manipulate. Deterministic algorithm: For each file: If not .svg: For each line: If doesn't contain `\bxmlns\b`: If neither `\bgnu\.org/license`, nor `\bmozilla\.org/MPL\b`: If both the HTTP and HTTPS versions return 200 OK and serve the same content: Replace HTTP with HTTPS. Signed-off-by: -
Alexander A. Klimov authored
Rationale: Reduces attack surface on kernel devs opening the links for MITM as HTTPS traffic is much harder to manipulate. Deterministic algorithm: For each file: If not .svg: For each line: If doesn't contain `\bxmlns\b`: If neither `\bgnu\.org/license`, nor `\bmozilla\.org/MPL\b`: If both the HTTP and HTTPS versions return 200 OK and serve the same content: Replace HTTP with HTTPS. Signed-off-by: -
Alexander A. Klimov authored
Rationale: Reduces attack surface on kernel devs opening the links for MITM as HTTPS traffic is much harder to manipulate. Deterministic algorithm: For each file: If not .svg: For each line: If doesn't contain `\bxmlns\b`: If neither `\bgnu\.org/license`, nor `\bmozilla\.org/MPL\b`: If both the HTTP and HTTPS versions return 200 OK and serve the same content: Replace HTTP with HTTPS. Signed-off-by: -
Alexander A. Klimov authored
Rationale: Reduces attack surface on kernel devs opening the links for MITM as HTTPS traffic is much harder to manipulate. Deterministic algorithm: For each file: If not .svg: For each line: If doesn't contain `\bxmlns\b`: If neither `\bgnu\.org/license`, nor `\bmozilla\.org/MPL\b`: If both the HTTP and HTTPS versions return 200 OK and serve the same content: Replace HTTP with HTTPS. Signed-off-by: -
Michael Tretter authored
Encode messages as necessary for the firmware 2019.2 and, thus, support the more recent firmware version in the driver, too. Signed-off-by:
Michael Tretter <m.tretter@pengutronix.de> Signed-off-by:
-
Michael Tretter authored
In order to distinguish the message format that is expected by the firmware, add a version field to the message header. This allows to encode and decode the messages for the version of the firmware that was loaded by the driver. Signed-off-by:
-
Michael Tretter authored
The length of the message will be determined when the message is encoded. Writing the size of the struct into the message in the driver won't be the actual length of the message that is send to the firmware. Therefore, drop the length field from the message. Since the header is the same for all response messages, it does not make sense to read the header in each decoding function, but we can simply decode it once before dispatching to the respective functions. Signed-off-by:
-
