- Jan 18, 2022
-
-
Lucas Tanure authored
When possible use dev_err_probe help to properly deal with the PROBE_DEFER error, the benefit is that DEFER issue will be logged in the devices_deferred debugfs file. Using dev_err_probe() can reduce code size, and the error value gets printed. Signed-off-by:
Lucas Tanure <tanureal@opensource.cirrus.com> Link: https://lore.kernel.org/r/20220117160830.709403-5-tanureal@opensource.cirrus.com Signed-off-by:
Takashi Iwai <tiwai@suse.de>
-
Lucas Tanure authored
Add switch default cases at gpio pins configs Signed-off-by:
-
Lucas Tanure authored
Create own namespace and avoid polluting the global namespace Signed-off-by:
-
Charles Keepax authored
The test key now needs to be manually held when calling cs35l41_register_errata_patch, after patch: Add the missing function calls to this driver. Fixes: f517ba49 ("ASoC: cs35l41: Add support for hibernate memory retention mode") Signed-off-by:
Charles Keepax <ckeepax@opensource.cirrus.com> Signed-off-by:
-
Charles Keepax authored
regmap_register_patch can't be used to apply the probe sequence as a patch is already registers with the regmap by cs35l41_register_errata_patch and only a single patch can be attached to a single regmap. The driver doesn't currently rely on a cache sync to re-apply this probe sequence so simply switch it to a multi write. Fixes: 7b2f3eb4 ("ALSA: hda: cs35l41: Add support for CS35L41 in HDA systems") Signed-off-by:
-
- Jan 17, 2022
-
-
Takashi Iwai authored
Some weird devices set the codec SSID vendor ID 0, and snd_pci_quirk_lookup_id() loop aborts at the point although it should still try matching with the SSID device ID. This resulted in a missing quirk for some old Macs. Fix the loop termination condition to check both subvendor and subdevice. Fixes: 73355ddd ("ALSA: hda: Code refactoring snd_hda_pick_fixup()") Cc: <stable@vger.kernel.org> BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=215495 Link: https://lore.kernel.org/r/20220116082838.19382-1-tiwai@suse.de Signed-off-by:
-
- Jan 16, 2022
-
-
Johannes Schickel authored
The USB audio device 0db0:419c based on the Realtek ALC4080 chip exposes all playback volume controls as "PCM". This is makes distinguishing the individual functions hard. The added mapping distinguishes all playback volume controls as their respective function: - Speaker - for back panel output - Frontpanel Headphone - for front panel output - IEC958 - for digital output on the back panel This clarifies the individual volume control functions for users. Signed-off-by:
Johannes Schickel <lordhoto@gmail.com> Link: https://lore.kernel.org/r/20220115140257.8751-1-lordhoto@gmail.com Signed-off-by:
-
- Jan 15, 2022
-
-
Alexander Sergeyev authored
There are several PCI ids associated with HP EliteBook 855 G8 Notebook PC. Commit 0e68c4b1 ("ALSA: hda/realtek: fix mute/micmute LEDs for HP 855 G8") covers 0x103c:0x8896, while this commit covers 0x103c:0x8895 which needs some additional work on top of the quirk from 0e68c4b1 . Note that the device can boot up with working speakers and micmute LED without this patch, but the success rate would be quite low (order of 16 working boots across 709 boots) at least for the built-in drivers scenario. This also means that there are some timing issues during early boot and this patch is a workaround. With this patch applied speakers and headphones are consistenly working, as well as mute/micmute LEDs and the internal microphone. Signed-off-by:
Alexander Sergeyev <sergeev917@gmail.com> Link: https://lore.kernel.org/r/20220114165050.ouw2nknuspclynro@localhost.localdomain Signed-off-by:
-
- Jan 13, 2022
-
-
Brent Lu authored
Entries without dmi_table nor codec_hid field need to be placed after entries with these two fields or they will be always selected. Signed-off-by:
Brent Lu <brent.lu@intel.com> Link: https://lore.kernel.org/r/20220113105220.1114694-3-brent.lu@intel.com Signed-off-by:
-
Brent Lu authored
Add rules to select SOF driver for Jasper Lake systems if digital microphone is present or the system is a Chromebook. Signed-off-by:
-
- Jan 11, 2022
-
-
Dan Carpenter authored
If we encounter an error after the kfree(acpi_hw_cfg); then the goto err; will result in a double free. Fixes: 7b2f3eb4 ("ALSA: hda: cs35l41: Add support for CS35L41 in HDA systems") Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Link: https://lore.kernel.org/r/20220111072232.GG11243@kili Signed-off-by:
-
- Jan 10, 2022
-
-
Takashi Iwai authored
Merge tag 'asoc-v5.17-2' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus ASoC: Updates for v5.17 A few more updates for v5.17, nothing hugely stand out in the few days since the initial pull request was sent.
-
- Jan 09, 2022
-
-
Takashi Iwai authored
CS35L41 SPI and I2C drivers depend on those buses, hence they have to have dependencies in Kconfig; otherwise it may result in missing symbols. Fixes: 7b2f3eb4 ("ALSA: hda: cs35l41: Add support for CS35L41 in HDA systems") Reported-by:
kernel test robot <lkp@intel.com> Link: https://lore.kernel.org/r/20220109081337.30623-1-tiwai@suse.de Signed-off-by:
-
- Jan 08, 2022
-
-
Takashi Iwai authored
The recently added support for CS35L41 codec unconditionally selects CONFIG_SND_SOC_CS35L41_LIB, but this can't work unless the top-level CONFIG_SND_SOC is enabled. This patch adds the proper dependency. Fixes: 7b2f3eb4 ("ALSA: hda: cs35l41: Add support for CS35L41 in HDA systems") Link: https://lore.kernel.org/r/20220107092647.20258-1-tiwai@suse.de Signed-off-by:
-
Charles Keepax authored
The cs35l41 supports a low power DSP memory retention mode. Add support for entering this mode when then device is not in use. Co-authored-by:
David Rhodes <david.rhodes@cirrus.com> Signed-off-by:
Mark Brown <broonie@kernel.org>
-
Charles Keepax authored
In preparation for the addition of PM runtime support move the test key out of the register patches themselves. This is necessary to allow the test key to be held during cache synchronisation, which is required by the OTP settings which were unpacked from the device and written by the driver. Also whilst at it, the driver uses a mixture of accessing the test key register by name and by address, consistently use the name. Signed-off-by:
-
- Jan 07, 2022
-
-
Jiasheng Jiang authored
To maintain the consistency of the code, it should be better to add the sanity check after calling dma_set_mask_and_coherent(), like tegra_pcm_dma_allocate() in `sound/soc/tegra/tegra_pcm.c`. Signed-off-by:
Jiasheng Jiang <jiasheng@iscas.ac.cn> Link: https://lore.kernel.org/r/20220107020851.3095591-1-jiasheng@iscas.ac.cn Signed-off-by:
-
Mark Brown authored
Merge series from Shengjiu Wang <shengjiu.wang@nxp.com>: Several improvement and fixes for AK codecs supported on i.MX platfroms
-
Yassine Oudjana authored
Currently, rx_port_value is a single unsigned int that gets overwritten when slim_rx_mux_put() is called for any RX mux, then the same value is read when slim_rx_mux_get() is called for any of them. This results in slim_rx_mux_get() reporting the last value set by slim_rx_mux_put() regardless of which SLIM RX mux is in question. Turn rx_port_value into an array and store a separate value for each SLIM RX mux. Signed-off-by:
Yassine Oudjana <y.oudjana@protonmail.com> Link: https://lore.kernel.org/r/20220104033356.343685-1-y.oudjana@protonmail.com Signed-off-by:
-
Ajit Kumar Pandey authored
RT1019 components was initially registered with i2c1 and i2c2 but now changed to i2c0 and i2c1 in most of our AMD platforms. Change default rt1019 components to 10EC1019:00 and 10EC1019:01 which is aligned with most of AMD machines. Any exception to rt1019 device ids in near future board design can be handled using dmi based quirk for that machine. Signed-off-by:
Ajit Kumar Pandey <AjitKumar.Pandey@amd.com> Link: https://lore.kernel.org/r/20220106150525.396170-1-AjitKumar.Pandey@amd.com Signed-off-by:
-
- Jan 06, 2022
-
-
Stefan Sauer authored
seq_virmidi.c: snd_virmidi_new() is already setting seq_mode to SNDRV_VIRMIDI_SEQ_DISPATCH. Signed-off-by:
Stefan Sauer <st_kost@gmx.de> Link: https://lore.kernel.org/r/20220106123821.16691-1-st_kost@gmx.de Signed-off-by:
-
Stefan Sauer authored
If a driver does not supply a drain operation for outputs, a default code path will execute msleep(50). Especially for a virtual midi device this severely limmits the throughput. This implementation for the virtual midi driver simply flushes the output workqueue. Signed-off-by:
-
Qinghua Jin authored
change 'postion' to 'position' Signed-off-by:
Qinghua Jin <qhjin.dev@gmail.com> Link: https://lore.kernel.org/r/20220106092847.357035-1-qhjin.dev@gmail.com Signed-off-by:
-
Shengjiu Wang authored
According to RM, the clock divider range is from 1 to 8, clock prescaling ratio may be any power of 2 from 1 to 128. So the supported divider is not all the value between 1 and 1024, just limited value in that range. Create table for the supported divder and add function to check the clock divider is available by comparing with the table. Fixes: d0250cf4 ("ASoC: fsl_asrc: Add an option to select internal ratio mode") Signed-off-by:
Shengjiu Wang <shengjiu.wang@nxp.com> Link: https://lore.kernel.org/r/1641380883-20709-1-git-send-email-shengjiu.wang@nxp.com Signed-off-by:
-
Hans de Goede authored
Some boards have the codec IRQ hooked-up as normally, so the driver can still do things like headset vs headphones and button-press detection, but instead of using one of the JD pins of the codec, an external GPIO is used to report the jack-presence switch status of the jack. Add support for boards which have this setup and which specify which external GPIO to use in the special Android AMCR0F28 ACPI device. And add a quirk for the Asus TF103C tablet which uses this setup. Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20220106110128.66049-7-hdegoede@redhat.com Signed-off-by:
-
Hans de Goede authored
Some X86 tablets, which ship with Android as factory installed OS, specify codec IRQs/GPIOS in a special Android AMCR0F28 ACPI device. Add support for retrieving the codec IRQ from this ACPI device instead of from the 10EC5640 device describing the codec itself and enable this on Asus MemoPad 7 ME176C tablets. This fixes jack-detect not working on these tablets. Cc: Stephan Gerhold <stephan@gerhold.net> Signed-off-by:
-
Hans de Goede authored
Some boards have the codec IRQ hooked-up as normally, so the driver can still do things like headset vs headphones and button-press detection, but instead of using one of the JD pins of the codec, an external GPIO is used to report the jack-presence switch status of the jack. Add support for this. Signed-off-by:
-
Hans de Goede authored
On some boards where the firmware/fwnode information is in essence read-only (x86 + ACPI boards) the i2c_client for the codec may contain the wrong IRQ or no IRQ at all. Since we only request the IRQ once snd_soc_component_set_jack() gets called, allow machine drivers to override the IRQ with the proper one through the data parameter to snd_soc_component_set_jack(). Signed-off-by:
-
Hans de Goede authored
Change jack_work from a struct work_struct to a struct delayed_work, this is a preparation patch for adding support for boards where an external GPIO is used for jack-detect, rather then one of the JD pins of the codec. Signed-off-by:
-
Hans de Goede authored
Commit 2b9c8d2b ("ASoC: rt5640: Add the HDA header support") adds re-queuing of the jack_work on resume when rt5640->jd_src != 0. But the jack_work will unconditionally deref rt5640->jack and that might be NULL. E.g. the sound/soc/intel/boards/bytcr_rt5640.c machine driver call snd_soc_component_set_jack(codec, NULL, NULL) from pre_suspend to disable the IRQ to avoid spurious wakeups, so when rt5640_resume() runs rt5640->jack will be NULL in this case. Make the queueing of the work conditional on rt5640->jack instead of on rt5640->jd_src to fix this. Fixes: 2b9c8d2b ("ASoC: rt5640: Add the HDA header support") Cc: Oder Chiou <oder_chiou@realtek.com> Signed-off-by:
-
Shengjiu Wang authored
According to RM, on auto mode: For codec AK4458 and AK4497, the lowest ratio of MLCK/FS is 256 if sample rate is 8kHz-48kHz, For codec AK5558, the lowest ratio of MLCK/FS is 512 if sample rate is 8kHz-48kHz. With these setting the sound quality for 8kHz-48kHz can be improved. Fixes: aa736700 ("ASoC: imx-card: Add imx-card machine driver") Signed-off-by:
-
Shengjiu Wang authored
Transfer the refined slots and slot_width to akcodec_get_mclk_rate() for mclk calculation, otherwise the mclk frequency does not match with the slots and slot_width for S16_LE format, because the default slot_width is 32. Fixes: aa736700 ("ASoC: imx-card: Add imx-card machine driver") Signed-off-by:
-
Shengjiu Wang authored
The SAI on i.MX8MQ don't support one2one ratio for mclk:bclk, so the mclk frequency exceeds the supported range of codec for the case that sample rate is larger than 705kHZ and format is S32_LE. Update the supported width for such case. Fixes: aa736700 ("ASoC: imx-card: Add imx-card machine driver") Signed-off-by:
-
Bart Kroon authored
The speaker fixup that is used for the Yoga 7 14ITL5 also applies to the IdeaPad Slim 9i 14ITL5. The attached patch applies the quirk to initialise the amplifier on the IdeaPad Slim 9i as well. This is validated to work on my laptop. [ corrected the quirk entry position by tiwai ] Signed-off-by:
Bart Kroon <bart@tarmack.eu> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/JAG24R.7NLJGWBF4G8U@tarmack.eu Signed-off-by:
-
Takashi Iwai authored
A randconfig caught a compile warning that is now treated as a fatal error: sound/soc/codecs/ak4375.c:415:13: error: ‘ak4375_power_off’ defined but not used [-Werror=unused-function] where ak4375_power_off() is used only from the PM handler. As both suspend and resumes are already marked with __maybe_unused, let's rip off the superfluous ifdef CONFIG_PM, so that the error above can be avoided. Fixes: 53778b82 ("ASoC: Add AK4375 support") Signed-off-by:
-
Stefan Binding authored
Add support for two CS35L41 using I2C bus and the component binding method [ Fix the entries to be sorted order by tiwai ] Signed-off-by:
Stefan Binding <sbinding@opensource.cirrus.com> Signed-off-by:
-
Lucas Tanure authored
Add Support for CS35L41 using the component binding method [ corrected the quirk entry position by tiwai ] Signed-off-by:
-
Lucas Tanure authored
Add support for CS35L41 using a new separated driver that can be used in all upcoming designs Signed-off-by:
-
Takashi Iwai authored
The recent few quirk entries for Lenovo haven't been put in the right order. Let's arrange the table again. Fixes: ad7cc2d4 ("ALSA: hda/realtek: Quirks to enable speaker output...") Fixes: 6dc86976 ("ALSA: hda/realtek: Add speaker fixup for some Yoga 15ITL5 devices") Fixes: 8f4c9042 ("ALSA: hda/realtek: Add quirk for Legion Y9000X 2020") Cc: <stable@vger.kernel.org> Signed-off-by:
-
- Jan 05, 2022
-
-
Mark Brown authored
Merge series from Charles Keepax <ckeepax@opensource.cirrus.com>: This patch series adds support for the low power hibernation feature on cs35l41. This allows the DSP memory to be retained whilst the device enters a very low power state.
-
