iomap_write_end() does not return a negative errno to indicate an
error, but the number of bytes successfully copied.  It cannot return
an error today, so include a debugging assertion like the one in
iomap_unshare_iter().

Fixes: c6f40468

 ("fsdax: decouple zeroing from the iomap buffered I/O code")
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20211221044450.517558-1-willy@infradead.org


Signed-off-by: Dan Williams <dan.j.williams@intel.com>

Strictly speaking the comparison between guid_t and raw buffer
is not correct. Import GUID to variable of guid_t type and then
compare.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20211213204632.56735-1-andriy.shevchenko@linux.intel.com


Signed-off-by: Dan Williams <dan.j.williams@intel.com>

These methods indirect the actual DAX read/write path.  In the end pmem
uses magic flush and mc safe variants and fuse and dcssblk use plain ones
while device mapper picks redirects to the underlying device.

Add set_dax_nocache() and set_dax_nomc() APIs to control which copy
routines are used to remove indirect call from the read/write fast path
as well as a lot of boilerplate code.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Vivek Goyal <vgoyal@redhat.com> [virtiofs]
Link: https://lore.kernel.org/r/20211215084508.435401-5-hch@lst.de


Signed-off-by: Dan Williams <dan.j.williams@intel.com>

Remove the DAXDEV_F_SYNC flag and thus the flags argument to alloc_dax and
just let the drivers call set_dax_synchronous directly.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Pankaj Gupta <pankaj.gupta@ionos.com>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Link: https://lore.kernel.org/r/20211215084508.435401-4-hch@lst.de


Signed-off-by: Dan Williams <dan.j.williams@intel.com>

Remove the pointless wrappers.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Pankaj Gupta <pankaj.gupta@ionos.com>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Link: https://lore.kernel.org/r/20211215084508.435401-3-hch@lst.de


Signed-off-by: Dan Williams <dan.j.williams@intel.com>

These two wrappers are never used.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20211215084508.435401-2-hch@lst.de


Signed-off-by: Dan Williams <dan.j.williams@intel.com>

@bytes also holds the return value from iomap_write_end, which can
contain a negative error value.  As @bytes is always less than the page
size even the signed type can hold the entire possible range.

Fixes: c6f40468

 ("fsdax: decouple zeroing from the iomap buffered I/O code")
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20211208091203.2927754-1-hch@lst.de


Signed-off-by: Dan Williams <dan.j.williams@intel.com>

No driver is left using the external pgmap refcount, so remove the
code to support it.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://lore.kernel.org/r/20211028151017.50234-1-hch@lst.de


Signed-off-by: Dan Williams <dan.j.williams@intel.com>

The file system DAX code now does not require the block code.  So allow
building a kernel with fuse DAX but not block layer.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Link: https://lore.kernel.org/r/20211129102203.2243509-30-hch@lst.de


Signed-off-by: Dan Williams <dan.j.williams@intel.com>

Only build the block based iomap code if CONFIG_BLOCK is set.  Currently
that is always the case, but it will change soon.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Link: https://lore.kernel.org/r/20211129102203.2243509-29-hch@lst.de


Signed-off-by: Dan Williams <dan.j.williams@intel.com>

The DAX device <-> block device association is only enabled if
CONFIG_BLOCK is enabled.  Update dax.h to account for that and use
the right conditions for the fs_put_dax stub as well.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Link: https://lore.kernel.org/r/20211129102203.2243509-28-hch@lst.de


Signed-off-by: Dan Williams <dan.j.williams@intel.com>

Remove the last user of ->bdev in dax.c by requiring the file system to
pass in an address that already includes the DAX offset.  As part of the
only set ->bdev or ->daxdev when actually required in the ->iomap_begin
methods.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Gao Xiang <hsiangkao@linux.alibaba.com> [erofs]
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Link: https://lore.kernel.org/r/20211129102203.2243509-27-hch@lst.de


Signed-off-by: Dan Williams <dan.j.williams@intel.com>

Prepare for the removal of the block_device from the DAX I/O path by
returning the partition offset from fs_dax_get_by_bdev so that the file
systems have it at hand for use during I/O.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Link: https://lore.kernel.org/r/20211129102203.2243509-26-hch@lst.de


Signed-off-by: Dan Williams <dan.j.williams@intel.com>

Add a flag so that the file system can easily detect DAX operations
based just on the iomap operation requested instead of looking at
inode state using IS_DAX.  This will be needed to apply the to be
added partition offset only for operations that actually use DAX,
but not things like fiemap that are based on the block device.
In the long run it should also allow turning the bdev, dax_dev
and inline_data into a union.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Link: https://lore.kernel.org/r/20211129102203.2243509-25-hch@lst.de


Signed-off-by: Dan Williams <dan.j.williams@intel.com>

To prepare for looking at the IOMAP_DAX flag in xfs_bmbt_to_iomap pass in
the input mapping flags to xfs_bmbt_to_iomap.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Link: https://lore.kernel.org/r/20211129102203.2243509-24-hch@lst.de


Signed-off-by: Dan Williams <dan.j.williams@intel.com>

While the buffered write iomap ops do work due to the fact that zeroing
never allocates blocks, the DAX zeroing should use the direct ops just
like actual DAX I/O.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Link: https://lore.kernel.org/r/20211129102203.2243509-23-hch@lst.de


Signed-off-by: Dan Williams <dan.j.williams@intel.com>

Hide the DAX device lookup from the xfs_super.c code.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Link: https://lore.kernel.org/r/20211129102203.2243509-22-hch@lst.de


Signed-off-by: Dan Williams <dan.j.williams@intel.com>

Only call fs_dax_get_by_bdev once the sbi has been allocated and remove
the need for the dax_dev local variable.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Link: https://lore.kernel.org/r/20211129102203.2243509-21-hch@lst.de


Signed-off-by: Dan Williams <dan.j.williams@intel.com>

Only call fs_dax_get_by_bdev once the sbi has been allocated and remove
the need for the dax_dev local variable.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Link: https://lore.kernel.org/r/20211129102203.2243509-20-hch@lst.de


Signed-off-by: Dan Williams <dan.j.williams@intel.com>

Unshare the DAX and iomap buffered I/O page zeroing code.  This code
previously did a IS_DAX check deep inside the iomap code, which in
fact was the only DAX check in the code.  Instead move these checks
into the callers.  Most callers already have DAX special casing anyway
and XFS will need it for reflink support as well.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Link: https://lore.kernel.org/r/20211129102203.2243509-19-hch@lst.de


Signed-off-by: Dan Williams <dan.j.williams@intel.com>

Factor out a helper for the "manual" zeroing of a DAX range to clean
up dax_iomap_zero a lot.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Link: https://lore.kernel.org/r/20211129102203.2243509-18-hch@lst.de


Signed-off-by: Dan Williams <dan.j.williams@intel.com>

The file relative offset must have the same alignment as the storage
offset, so use that and get rid of the call to iomap_sector.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Link: https://lore.kernel.org/r/20211129102203.2243509-17-hch@lst.de


Signed-off-by: Dan Williams <dan.j.williams@intel.com>

Add helpers to prepare for using different DAX operations.

Signed-off-by: Shiyang Ruan <ruansy.fnst@fujitsu.com>
[hch: split from a larger patch + slight cleanups]
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Link: https://lore.kernel.org/r/20211129102203.2243509-16-hch@lst.de


Signed-off-by: Dan Williams <dan.j.williams@intel.com>

Replace the two steps of dax_iomap_sector and bdev_dax_pgoff with a
single dax_iomap_pgoff helper that avoids lots of cumbersome sector
conversions.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Link: https://lore.kernel.org/r/20211129102203.2243509-15-hch@lst.de


Signed-off-by: Dan Williams <dan.j.williams@intel.com>

Just pass the vm_fault and iomap_iter structures, and figure out the rest
locally.  Note that this requires moving dax_iomap_sector up in the file.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Link: https://lore.kernel.org/r/20211129102203.2243509-14-hch@lst.de


Signed-off-by: Dan Williams <dan.j.williams@intel.com>

Despite its name copy_user_page expected kernel addresses, which is what
we already have.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Link: https://lore.kernel.org/r/20211129102203.2243509-13-hch@lst.de


Signed-off-by: Dan Williams <dan.j.williams@intel.com>

Add a helper to perform the entire remapping for DAX accesses.  This
helper open codes bdev_dax_pgoff given that the alignment checks have
already been done by the submitting file system and don't need to be
repeated.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Mike Snitzer <snitzer@redhat.com>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Link: https://lore.kernel.org/r/20211129102203.2243509-12-hch@lst.de


Signed-off-by: Dan Williams <dan.j.williams@intel.com>

Add a helper to perform the entire remapping for DAX accesses.  This
helper open codes bdev_dax_pgoff given that the alignment checks have
already been done by the submitting file system and don't need to be
repeated.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Mike Snitzer <snitzer@redhat.com>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Link: https://lore.kernel.org/r/20211129102203.2243509-11-hch@lst.de


Signed-off-by: Dan Williams <dan.j.williams@intel.com>

Add a helper to perform the entire remapping for DAX accesses.  This
helper open codes bdev_dax_pgoff given that the alignment checks have
already been done by the submitting file system and don't need to be
repeated.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Mike Snitzer <snitzer@redhat.com>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Link: https://lore.kernel.org/r/20211129102203.2243509-10-hch@lst.de


Signed-off-by: Dan Williams <dan.j.williams@intel.com>

Just open code the block size and dax_dev == NULL checks in the callers.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Mike Snitzer <snitzer@redhat.com>
Reviewed-by: Gao Xiang <hsiangkao@linux.alibaba.com> [erofs]
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Link: https://lore.kernel.org/r/20211129102203.2243509-9-hch@lst.de


Signed-off-by: Dan Williams <dan.j.williams@intel.com>

Factor out another DAX setup helper to simplify future changes.  Also
move the experimental warning after the checks to not clutter the log
too much if the setup failed.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Link: https://lore.kernel.org/r/20211129102203.2243509-8-hch@lst.de


Signed-off-by: Dan Williams <dan.j.williams@intel.com>

fs_dax_get_by_bdev is the primary interface to find a dax device for a
block device, so move the partition alignment check there instead of
wiring it up through ->dax_supported.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Link: https://lore.kernel.org/r/20211129102203.2243509-7-hch@lst.de


Signed-off-by: Dan Williams <dan.j.williams@intel.com>

Drivers that register a dax_dev should make sure it works, no need
to double check from the file system.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Link: https://lore.kernel.org/r/20211129102203.2243509-6-hch@lst.de


Signed-off-by: Dan Williams <dan.j.williams@intel.com>

Replace the dax_host_hash with an xarray indexed by the pointer value
of the gendisk, and require explicitly calls from the block drivers that
want to associate their gendisk with a dax_device.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Mike Snitzer <snitzer@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Link: https://lore.kernel.org/r/20211129102203.2243509-5-hch@lst.de


Signed-off-by: Dan Williams <dan.j.williams@intel.com>

CONFIG_DAX_DRIVER only selects CONFIG_DAX now, so remove it.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Link: https://lore.kernel.org/r/20211129102203.2243509-4-hch@lst.de


Signed-off-by: Dan Williams <dan.j.williams@intel.com>

The device mapper DAX support is all hanging off a block device and thus
can't be used with device dax.  Make it depend on CONFIG_FS_DAX instead
of CONFIG_DAX_DRIVER.  This also means that bdev_dax_pgoff only needs to
be built under CONFIG_FS_DAX now.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Mike Snitzer <snitzer@redhat.com>
Link: https://lore.kernel.org/r/20211129102203.2243509-3-hch@lst.de


Signed-off-by: Dan Williams <dan.j.williams@intel.com>

Make sure ->dax_dev is NULL on error so that the cleanup path doesn't
trip over an ERR_PTR.

Reported-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20211129102203.2243509-2-hch@lst.de


Signed-off-by: Dan Williams <dan.j.williams@intel.com>

The /sys/class/dax compatibility option has shipped in the kernel for 4
years now which should be sufficient time for tools to abandon the old
ABI in favor of the /sys/bus/dax device-model. Delete it now and see if
anyone screams.

Since this compatibility option shipped there has been more reports of
users being surprised by the compat ABI than surprised by the "new", so
the compat infrastructure has outlived its usefulness. Recall that
/sys/bus/dax device-model is required for the dax kmem driver which
allows PMEM to be used as "System RAM".

The following projects were known to have a dependency on /sys/class/dax
and have dropped their dependency as of the listed version:

- ndctl (including libndctl, daxctl, and libdaxctl): v64+
- fio: v3.13+
- pmdk: v1.5.2+

As further evidence this option is no longer needed some distributions
have already stopped enabling CONFIG_DEV_DAX_PMEM_COMPAT.

Cc: Ira Weiny <ira.weiny@intel.com>
Cc: Dave Jiang <dave.jiang@intel.com>
Reported-by:...

Add Kconfig support for -Wimplicit-fallthrough for both GCC and Clang.

The compiler option is under configuration CC_IMPLICIT_FALLTHROUGH,
which is enabled by default.

Special thanks to Nathan Chancellor who fixed the Clang bug[1][2]. This
bugfix only appears in Clang 14.0.0, so older versions still contain
the bug and -Wimplicit-fallthrough won't be enabled for them, for now.

This concludes a long journey and now we are finally getting rid
of the unintentional fallthrough bug-class in the kernel, entirely. :)

Link: https://github.com/llvm/llvm-project/commit/9ed4a94d6451046a51ef393cd62f00710820a7e8 [1]
Link: https://bugs.llvm.org/show_bug.cgi?id=51094 [2]
Link: https://github.com/KSPP/linux/issues/115
Link: https://github.com/ClangBuiltLinux/linux/issues/236


Co-developed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
Co-developed-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Tested-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>