- Feb 09, 2022
-
-
Dan Williams authored
The core houses infrastructure for decoder resources. A CXL port's dports are more closely related to decoder infrastructure than topology enumeration. Implement generic PCI based dport enumeration in the core, i.e. arrange for existing root port enumeration from cxl_acpi to share code with switch port enumeration which just amounts to a small difference in a pci_walk_bus() invocation once the appropriate 'struct pci_bus' has been retrieved. Set the convention that decoder objects are registered after all dports are enumerated. This enables userspace to know when the CXL core is finished establishing 'dportX' links underneath the 'portX' object. Reviewed-by:
Jonathan Cameron <Jonathan.Cameron@huawei.com> Link: https://lore.kernel.org/r/164368114191.354031.5270501846455462665.stgit@dwillia2-desk3.amr.corp.intel.com Signed-off-by:
Dan Williams <dan.j.williams@intel.com>
-
Dan Williams authored
Similar to the mem.h rename, if the core wants to reuse definitions from drivers/cxl/pci.h it is unable to use <pci.h> as that collides with archs that have an arch/$arch/include/asm/pci.h, like MIPS. Reported-by:
kernel test robot <lkp@intel.com> Acked-by:
Ben Widawsky <ben.widawsky@intel.com> Reviewed-by:
-
Dan Williams authored
In preparation for moving dport enumeration into the core, require the port device lock to be acquired by the caller. Reviewed-by:
-
Dan Williams authored
In preparation for switch port enumeration while also preserving the potential for multi-domain / multi-root CXL topologies. Introduce a 'struct device' generic mechanism for retrieving a root CXL port, if one is registered. Note that the only known multi-domain CXL configurations are running the cxl_test unit test on a system that also publishes an ACPI0017 device. With this in hand the nvdimm-bridge lookup can be with device_find_child() instead of bus_find_device() + custom mocked lookup infrastructure in cxl_test. The mechanism looks for a 2nd level port since the root level topology is platform-firmware specific and the 2nd level down follows standard PCIe topology expectations. The cxl_acpi 2nd level is associated with a PCIe Root Port. Reported-by:
-
Dan Williams authored
Add a helper for converting a PCI enumerated cxl_port into the pci_bus that hosts its dports. For switch ports this is trivial, but for root ports there is no generic way to go from a platform defined host bridge device, like ACPI0016 to its corresponding pci_bus. Rather than spill ACPI goop outside of the cxl_acpi driver, just arrange for it to register an xarray translation from the uport device to the corresponding pci_bus. This is in preparation for centralizing dport enumeration in the core. Reviewed-by:
-
Dan Williams authored
Lockdep reports: ====================================================== WARNING: possible circular locking dependency detected 5.16.0-rc1+ #142 Tainted: G OE ------------------------------------------------------ cxl/1220 is trying to acquire lock: ffff979b85475460 (kn->active#144){++++}-{0:0}, at: __kernfs_remove+0x1ab/0x1e0 but task is already holding lock: ffff979b87ab38e8 (&dev->lockdep_mutex#2/4){+.+.}-{3:3}, at: cxl_remove_ep+0x50c/0x5c0 [cxl_core] ...where cxl_remove_ep() is a helper that wants to delete ports while holding a lock on the host device for that port. That sets up a lockdep violation whereby target_list_show() can not rely holding the decoder's device lock while walking the target_list. Switch to a dedicated seqlock for this purpose. Reported-by: -
Dan Williams authored
When CONFIG_PROVE_LOCKING is enabled the 'struct device' definition gets an additional mutex that is not clobbered by lockdep_set_novalidate_class() like the typical device_lock(). This allows for local annotation of subsystem locks with mutex_lock_nested() per the subsystem's object/lock hierarchy. For CXL, this primarily needs the ability to lock ports by depth and child objects of ports by their parent parent-port lock. Reviewed-by:
-
Ben Widawsky authored
In preparation for proving CXL subsystem usage of the device_lock() order track the depth of ports with the expectation that shallower port locks can be held over deeper port locks. Signed-off-by:
-
Ben Widawsky authored
Unused CXL decoders, or ports which use a passthrough decoder (no HDM decoder registers) are expected to be initialized in a specific way. Since upcoming drivers will want the same initialization, and it was already a requirement to have consumers of the API configure the decoder specific to their needs, initialize to this passthrough state by default. Signed-off-by:
-
Dan Williams authored
Fix a '\n' vs '/n' typo. Fixes: 08422378 ("cxl/pci: Add HDM decoder capabilities") Acked-by:
-
Ben Widawsky authored
Add wrappers for the creation of decoder objects at the root level and switch level, and keep the core helper private to cxl/core/port.c. Root decoders are static descriptors conveyed from platform firmware (e.g. ACPI CFMWS). Switch decoders are CXL standard decoders enumerated via the HDM decoder capability structure. The base address for the HDM decoder capability structure may be conveyed either by PCIe or platform firmware (ACPI CEDT.CHBS). Additionally, the kdoc descriptions for these helpers and their dependencies is updated. Signed-off-by:
-
Ben Widawsky authored
CXL decoders manage address ranges in a hierarchical fashion whereby a leaf is a unique subregion of its parent decoder (midlevel or root). It therefore makes sense to use the resource API for handling this. Reviewed-by:
-
Dan Williams authored
Just like /proc/iomem, CXL physical address information is reserved for root only. Reviewed-by:
-
Dan Williams authored
Given it is dominated by port infrastructure, and will only acquire more, rename bus.c to port.c. Reviewed-by:
-
Ben Widawsky authored
Many CXL drivers simply want to register and unregister themselves. module_driver already supported this. A simple wrapper around that reduces a decent amount of boilerplate in upcoming patches. Suggested-by:
-
Ben Widawsky authored
This implements the TODO in cxl_acpi for mapping component registers. cxl_acpi becomes the second consumer of CXL register block enumeration (cxl_pci being the first). Moving the functionality to cxl_core allows both of these drivers to use the functionality. Equally importantly it allows cxl_core to use the functionality in the future. CXL 2.0 root ports are similar to CXL 2.0 Downstream Ports with the main distinction being they're a part of the CXL 2.0 host bridge. While mapping their component registers is not immediately useful for the CXL drivers, the movement of register block enumeration into core is a vital step towards HDM decoder programming. Signed-off-by:
-
Ben Widawsky authored
In preparation for properly supporting memory active timeout, and later on, other attributes obtained from DVSEC fields, add the full list of DVSEC identifiers from the CXL 2.0 specification. Reviewed-by:
-
Ben Widawsky authored
Get a better naming scheme in place for upcoming additions. By dropping redundant usages of CXL and DVSEC where appropriate we can get more concise and also more grepable defines. Reviewed-by:
-
Dan Williams authored
Device status can change without warning at any point in time. This effectively means that no amount of status checking before a command is submitted can guarantee that the device is not in an error condition when the command is later submitted. The clearest signal that a device is not able to process commands is if it fails to process commands. With the above understanding in hand, update cxl_pci_setup_mailbox() to validate the readiness of the mailbox once at the beginning of time, and then use timeouts and busy sequencing errors as the only occasions to report status. Just as before, unless and until the driver gains a reset recovery path, doorbell clearing failures by the device are fatal to mailbox operations. Reviewed-by:
-
Ben Widawsky authored
The original driver implementation used the doorbell timeout for the Mailbox Interface Ready bit to piggy back off of, since the latter does not have a defined timeout. This functionality, introduced in commit 8adaf747 ("cxl/mem: Find device capabilities"), needs improvement as the recent "Add Mailbox Ready Time" ECN timeout indicates that the mailbox ready time can be significantly longer that 2 seconds. While the specification limits the maximum timeout to 256s, the cxl_pci driver gives up on the mailbox after 60s. This value corresponds with important timeout values already present in the kernel. A module parameter is provided as an emergency override and represents the default Linux policy for all devices. Signed-off-by:
-
Ben Widawsky authored
The cxl_mem module was renamed cxl_pci in commit 21e9f767 ("cxl: Rename mem to pci"). In preparation for adding an ancillary driver for cxl_memdev devices (registered on the cxl bus by cxl_pci), go ahead and rename CONFIG_CXL_MEM to CONFIG_CXL_PCI. Free up the CXL_MEM name for that new driver to manage CXL.mem endpoint operations. Suggested-by:
-
- Jan 30, 2022
-
-
Linus Torvalds authored
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull irq fixes from Borislav Petkov: - Drop an unused private data field in the AIC driver - Various fixes to the realtek-rtl driver - Make the GICv3 ITS driver compile again in !SMP configurations - Force reset of the GICv3 ITSs at probe time to avoid issues during kexec - Yet another kfree/bitmap_free conversion - Various DT updates (Renesas, SiFive) * tag 'irq_urgent_for_v5.17_rc2_p2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: dt-bindings: interrupt-controller: sifive,plic: Group interrupt tuples dt-bindings: interrupt-controller: sifive,plic: Fix number of interrupts dt-bindings: irqchip: renesas-irqc: Add R-Car V3U support irqchip/gic-v3-its: Reset each ITS's BASERn register before probe irqchip/gic-v3-its: Fix build for !SMP irqchip/loongson-pch-ms: Use bitmap_free() to free bitmap irqchip/realtek-rtl: Service all pending interrupts irqchip/realtek-rtl: Fix off-by-one in routing irqchip/realtek-rtl: Map control data to virq irqchip/apple-aic: Drop unused ipi_hwirq field
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull perf fixes from Borislav Petkov: - Prevent accesses to the per-CPU cgroup context list from another CPU except the one it belongs to, to avoid list corruption - Make sure parent events are always woken up to avoid indefinite hangs in the traced workload * tag 'perf_urgent_for_v5.17_rc2_p2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf/core: Fix cgroup event list management perf: Always wake the parent event
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull scheduler fix from Borislav Petkov: "Make sure the membarrier-rseq fence commands are part of the reported set when querying membarrier(2) commands through MEMBARRIER_CMD_QUERY" * tag 'sched_urgent_for_v5.17_rc2_p2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: sched/membarrier: Fix membarrier-rseq fence command missing from query bitmask
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86 fixes from Borislav Petkov: - Add another Intel CPU model to the list of CPUs supporting the processor inventory unique number - Allow writing to MCE thresholding sysfs files again - a previous change had accidentally disabled it and no one noticed. Goes to show how much is this stuff used * tag 'x86_urgent_for_v5.17_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/cpu: Add Xeon Icelake-D to list of CPUs that support PPIN x86/MCE/AMD: Allow thresholding interface updates after init
-
Linus Torvalds authored
Merge misc fixes from Andrew Morton: "12 patches. Subsystems affected by this patch series: sysctl, binfmt, ia64, mm (memory-failure, folios, kasan, and psi), selftests, and ocfs2" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: ocfs2: fix a deadlock when commit trans jbd2: export jbd2_journal_[grab|put]_journal_head psi: fix "defined but not used" warnings when CONFIG_PROC_FS=n psi: fix "no previous prototype" warnings when CONFIG_CGROUPS=n mm, kasan: use compare-exchange operation to set KASAN page tag kasan: test: fix compatibility with FORTIFY_SOURCE tools/testing/scatterlist: add missing defines mm: page->mapping folio->mapping should have the same offset memory-failure: fetch compound_head after pgmap_pfn_valid() ia64: make IA64_MCA_RECOVERY bool instead of tristate binfmt_misc: fix crash when load/unload module include/linux/sysctl.h: fix register_sysctl_mount_point() return type
-
Joseph Qi authored
commit 6f1b2285 introduces a regression which can deadlock as follows: Task1: Task2: jbd2_journal_commit_transaction ocfs2_test_bg_bit_allocatable spin_lock(&jh->b_state_lock) jbd_lock_bh_journal_head __jbd2_journal_remove_checkpoint spin_lock(&jh->b_state_lock) jbd2_journal_put_journal_head jbd_lock_bh_journal_head Task1 and Task2 lock bh->b_state and jh->b_state_lock in different order, which finally result in a deadlock. So use jbd2_journal_[grab|put]_journal_head instead in ocfs2_test_bg_bit_allocatable() to fix it. Link: https://lkml.kernel.org/r/20220121071205.100648-3-joseph.qi@linux.alibaba.com Fixes: 6f1b2285 ("ocfs2: fix race between searching chunks and release journal_head from buffer_head") Signed-off-by:
Joseph Qi <joseph.qi@linux.alibaba.com> Reported-by:
Gautham Ananthakrishna <gautham.ananthakrishna@oracle.com> Tested-by:
Saeed Mirzamohammadi <saeed.mirzamohammadi@oracle.com> Cc: "Theodore Ts'o" <tytso@mit.edu> Cc: Andreas Dilger <adilger.kernel@dilger.ca> Cc: Changwei Ge <gechangwei@live.cn> Cc: Gang He <ghe@suse.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Jun Piao <piaojun@huawei.com> Cc: Junxiao Bi <junxiao.bi@oracle.com> Cc: Mark Fasheh <mark@fasheh.com> Cc: <stable@vger.kernel.org> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Joseph Qi authored
Patch series "ocfs2: fix a deadlock case". This fixes a deadlock case in ocfs2. We firstly export jbd2 symbols jbd2_journal_[grab|put]_journal_head as preparation and later use them in ocfs2 insread of jbd_[lock|unlock]_bh_journal_head to fix the deadlock. This patch (of 2): This exports symbols jbd2_journal_[grab|put]_journal_head, which will be used outside modules, e.g. ocfs2. Link: https://lkml.kernel.org/r/20220121071205.100648-2-joseph.qi@linux.alibaba.com Signed-off-by:
-
Suren Baghdasaryan authored
When CONFIG_PROC_FS is disabled psi code generates the following warnings: kernel/sched/psi.c:1364:30: warning: 'psi_cpu_proc_ops' defined but not used [-Wunused-const-variable=] 1364 | static const struct proc_ops psi_cpu_proc_ops = { | ^~~~~~~~~~~~~~~~ kernel/sched/psi.c:1355:30: warning: 'psi_memory_proc_ops' defined but not used [-Wunused-const-variable=] 1355 | static const struct proc_ops psi_memory_proc_ops = { | ^~~~~~~~~~~~~~~~~~~ kernel/sched/psi.c:1346:30: warning: 'psi_io_proc_ops' defined but not used [-Wunused-const-variable=] 1346 | static const struct proc_ops psi_io_proc_ops = { | ^~~~~~~~~~~~~~~ Make definitions of these structures and related functions conditional on CONFIG_PROC_FS config. Link: https://lkml.kernel.org/r/20220119223940.787748-3-surenb@google.com Fixes: 0e94682b ("psi: introduce psi monitor") Signed-off-by:Suren Baghdasaryan <surenb@google.com> Reported-by:
Johannes Weiner <hannes@cmpxchg.org> Signed-off-by:
-
Suren Baghdasaryan authored
When CONFIG_CGROUPS is disabled psi code generates the following warnings: kernel/sched/psi.c:1112:21: warning: no previous prototype for 'psi_trigger_create' [-Wmissing-prototypes] 1112 | struct psi_trigger *psi_trigger_create(struct psi_group *group, | ^~~~~~~~~~~~~~~~~~ kernel/sched/psi.c:1182:6: warning: no previous prototype for 'psi_trigger_destroy' [-Wmissing-prototypes] 1182 | void psi_trigger_destroy(struct psi_trigger *t) | ^~~~~~~~~~~~~~~~~~~ kernel/sched/psi.c:1249:10: warning: no previous prototype for 'psi_trigger_poll' [-Wmissing-prototypes] 1249 | __poll_t psi_trigger_poll(void **trigger_ptr, | ^~~~~~~~~~~~~~~~ Change the declarations of these functions in the header to provide the prototypes even when they are unused. Link: https://lkml.kernel.org/r/20220119223940.787748-2-surenb@google.com Fixes: 0e94682b ("psi: introduce psi monitor") Signed-off-by: -
Peter Collingbourne authored
It has been reported that the tag setting operation on newly-allocated pages can cause the page flags to be corrupted when performed concurrently with other flag updates as a result of the use of non-atomic operations. Fix the problem by using a compare-exchange loop to update the tag. Link: https://lkml.kernel.org/r/20220120020148.1632253-1-pcc@google.com Link: https://linux-review.googlesource.com/id/I456b24a2b9067d93968d43b4bb3351c0cec63101 Fixes: 2813b9c0 ("kasan, mm, arm64: tag non slab memory allocated via pagealloc") Signed-off-by:
Peter Collingbourne <pcc@google.com> Reviewed-by:
Andrey Konovalov <andreyknvl@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: <stable@vger.kernel.org> Signed-off-by:
-
Marco Elver authored
With CONFIG_FORTIFY_SOURCE enabled, string functions will also perform dynamic checks using __builtin_object_size(ptr), which when failed will panic the kernel. Because the KASAN test deliberately performs out-of-bounds operations, the kernel panics with FORTIFY_SOURCE, for example: | kernel BUG at lib/string_helpers.c:910! | invalid opcode: 0000 [#1] PREEMPT SMP KASAN PTI | CPU: 1 PID: 137 Comm: kunit_try_catch Tainted: G B 5.16.0-rc3+ #3 | Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.14.0-2 04/01/2014 | RIP: 0010:fortify_panic+0x19/0x1b | ... | Call Trace: | kmalloc_oob_in_memset.cold+0x16/0x16 | ... Fix it by also hiding `ptr` from the optimizer, which will ensure that __builtin_object_size() does not return a valid size, preventing fortified string functions from panicking. Link: https://lkml.kernel.org/r/20220124160744.1244685-1-elver@google.com Signed-off-by:
Marco Elver <elver@google.com> Reported-by:
Nico Pache <npache@redhat.com> Reviewed-by:
Kees Cook <keescook@chromium.org> Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com> Cc: Alexander Potapenko <glider@google.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Brendan Higgins <brendanhiggins@google.com> Signed-off-by:
-
Maor Gottlieb authored
The cited commits replaced preemptible with pagefault_disabled and flush_kernel_dcache_page with flush_dcache_page respectively, hence need to update the corresponding defines in the test. scatterlist.c: In function ‘sg_miter_stop’: scatterlist.c:919:4: warning: implicit declaration of function ‘flush_dcache_page’ [-Wimplicit-function-declaration] flush_dcache_page(miter->page); ^~~~~~~~~~~~~~~~~ In file included from linux/scatterlist.h:8:0, from scatterlist.c:9: scatterlist.c:922:18: warning: implicit declaration of function ‘pagefault_disabled’ [-Wimplicit-function-declaration] WARN_ON_ONCE(!pagefault_disabled()); ^ linux/mm.h:23:25: note: in definition of macro ‘WARN_ON_ONCE’ int __ret_warn_on = !!(condition); \ ^~~~~~~~~ Link: https://lkml.kernel.org/r/20220118082105.1737320-1-maorg@nvidia.com Fixes: 723aca20 ("mm/s... -
Wei Yang authored
As with the other members of folio, the offset of page->mapping and folio->mapping must be the same. The compile-time check was inadvertently removed during development. Add it back. [willy@infradead.org: changelog redo] Link: https://lkml.kernel.org/r/20220104011734.21714-1-richard.weiyang@gmail.com Signed-off-by:
Wei Yang <richard.weiyang@gmail.com> Reviewed-by:
Matthew Wilcox (Oracle) <willy@infradead.org> Signed-off-by:
-
Joao Martins authored
memory_failure_dev_pagemap() at the moment assumes base pages (e.g. dax_lock_page()). For devmap with compound pages fetch the compound_head in case a tail page memory failure is being handled. Currently this is a nop, but in the advent of compound pages in dev_pagemap it allows memory_failure_dev_pagemap() to keep working. Without this fix memory-failure handling (i.e. MCEs on pmem) with device-dax configured namespaces will regress (and crash). Link: https://lkml.kernel.org/r/20211202204422.26777-2-joao.m.martins@oracle.com Reported-by:
Jane Chu <jane.chu@oracle.com> Signed-off-by:
Joao Martins <joao.m.martins@oracle.com> Reviewed-by:
Naoya Horiguchi <naoya.horiguchi@nec.com> Reviewed-by:
Muchun Song <songmuchun@bytedance.com> Signed-off-by:
-
Randy Dunlap authored
In linux-next, IA64_MCA_RECOVERY uses the (new) function make_task_dead(), which is not exported for use by modules. Instead of exporting it for one user, convert IA64_MCA_RECOVERY to be a bool Kconfig symbol. In a config file from "kernel test robot <lkp@intel.com>" for a different problem, this linker error was exposed when CONFIG_IA64_MCA_RECOVERY=m. Fixes this build error: ERROR: modpost: "make_task_dead" [arch/ia64/kernel/mca_recovery.ko] undefined! Link: https://lkml.kernel.org/r/20220124213129.29306-1-rdunlap@infradead.org Fixes: 0e25498f ("exit: Add and use make_task_dead.") Signed-off-by:
Randy Dunlap <rdunlap@infradead.org> Suggested-by:
Christoph Hellwig <hch@infradead.org> Reviewed-by:
Christoph Hellwig <hch@lst.de> Reviewed-by:
"Eric W. Biederman" <ebiederm@xmission.com> Cc: Tony Luck <tony.luck@intel.com> Signed-off-by:
-
Tong Zhang authored
We should unregister the table upon module unload otherwise something horrible will happen when we load binfmt_misc module again. Also note that we should keep value returned by register_sysctl_mount_point() and release it later, otherwise it will leak. Also, per Christian's comment, to fully restore the old behavior that won't break userspace the check(binfmt_misc_header) should be eliminated. To reproduce: modprobe binfmt_misc modprobe -r binfmt_misc modprobe binfmt_misc modprobe -r binfmt_misc modprobe binfmt_misc resulting in modprobe: can't load module binfmt_misc (kernel/fs/binfmt_misc.ko): Cannot allocate memory and an unhappy kernel: binfmt_misc: Failed to create fs/binfmt_misc sysctl mount point binfmt_misc: Failed to create fs/binfmt_misc sysctl mount point BUG: unable to handle page fault for address: fffffbfff8004802 Call Trace: init_misc_binfmt+0x2d/0x1000 [binfmt_misc] Link: https://lkml.kernel.org/r/20220124181812.1869535-2-ztong0001@gmail.com Fixes: 3ba442d5 ("fs: move binfmt_misc sysctl to its own file") Signed-off-by:Tong Zhang <ztong0001@gmail.com> Co-developed-by:
Christian <Brauner<brauner@kernel.org> Acked-by:
Luis Chamberlain <mcgrof@kernel.org> Cc: Eric Biederman <ebiederm@xmission.com> Cc: Kees Cook <keescook@chromium.org> Cc: Iurii Zaikin <yzaikin@google.com> Signed-off-by:
-
Andrew Morton authored
The CONFIG_SYSCTL=n stub returns the wrong type. Fixes: ee9efac4 ("sysctl: add helper to register a sysctl mount point") Reported-by:
-
Thomas Gleixner authored
Merge tag 'irqchip-fixes-5.17-1' of git://git.kernel.org/pub/scm/linux/kernel/git/maz/arm-platforms into irq/urgent Pull irqchip fixes from Marc Zyngier: - Drop an unused private data field in the AIC driver - Various fixes to the realtek-rtl driver - Make the GICv3 ITS driver compile again in !SMP configurations - Force reset of the GICv3 ITSs at probe time to avoid issues during kexec - Yet another kfree/bitmap_free conversion - Various DT updates (Renesas, SiFive) Link: https://lore.kernel.org/r/20220128174217.517041-1-maz@kernel.org
-
