- Feb 25, 2017
-
-
Dave Jiang authored
Add transparent huge PUD pages support for device DAX by adding a pud_fault handler. Link: http://lkml.kernel.org/r/148545060002.17912.6765687780007547551.stgit@djiang5-desk3.ch.intel.com Signed-off-by:
Dave Jiang <dave.jiang@intel.com> Cc: Matthew Wilcox <mawilcox@microsoft.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Jan Kara <jack@suse.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Ross Zwisler <ross.zwisler@linux.intel.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Nilesh Choudhury <nilesh.choudhury@oracle.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Matthew Wilcox authored
The current transparent hugepage code only supports PMDs. This patch adds support for transparent use of PUDs with DAX. It does not include support for anonymous pages. x86 support code also added. Most of this patch simply parallels the work that was done for huge PMDs. The only major difference is how the new ->pud_entry method in mm_walk works. The ->pmd_entry method replaces the ->pte_entry method, whereas the ->pud_entry method works along with either ->pmd_entry or ->pte_entry. The pagewalk code takes care of locking the PUD before calling ->pud_walk, so handlers do not need to worry whether the PUD is stable. [dave.jiang@intel.com: fix SMP x86 32bit build for native_pud_clear()] Link: http://lkml.kernel.org/r/148719066814.31111.3239231168815337012.stgit@djiang5-desk3.ch.intel.com [dave.jiang@intel.com: native_pud_clear missing on i386 build] Link: http://lkml.kernel.org/r/148640375195.69754.3315433724330910314.stgit@djiang5-desk3.ch.intel.com Link: http://lkml.kernel.org/r/148545059381.17912.8602162635537598445.stgit@djiang5-desk3.ch.intel.com Signed-off-by:
Matthew Wilcox <mawilcox@microsoft.com> Signed-off-by:
Alexander Kapshuk <alexander.kapshuk@gmail.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Jan Kara <jack@suse.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Ross Zwisler <ross.zwisler@linux.intel.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Nilesh Choudhury <nilesh.choudhury@oracle.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by:
-
Dave Jiang authored
Patch series "1G transparent hugepage support for device dax", v2. The following series implements support for 1G trasparent hugepage on x86 for device dax. The bulk of the code was written by Mathew Wilcox a while back supporting transparent 1G hugepage for fs DAX. I have forward ported the relevant bits to 4.10-rc. The current submission has only the necessary code to support device DAX. Comments from Dan Williams: So the motivation and intended user of this functionality mirrors the motivation and users of 1GB page support in hugetlbfs. Given expected capacities of persistent memory devices an in-memory database may want to reduce tlb pressure beyond what they can already achieve with 2MB mappings of a device-dax file. We have customer feedback to that effect as Willy mentioned in his previous version of these patches [1]. [1]: https://lkml.org/lkml/2016/1/31/52 Comments from Nilesh @ Oracle: There are applications which have a process model; and if you assume 10,000 processes attempting to mmap all the 6TB memory available on a server; we are looking at the following: processes : 10,000 memory : 6TB pte @ 4k page size: 8 bytes / 4K of memory * #processes = 6TB / 4k * 8 * 10000 = 1.5GB * 80000 = 120,000GB pmd @ 2M page size: 120,000 / 512 = ~240GB pud @ 1G page size: 240GB / 512 = ~480MB As you can see with 2M pages, this system will use up an exorbitant amount of DRAM to hold the page tables; but the 1G pages finally brings it down to a reasonable level. Memory sizes will keep increasing; so this number will keep increasing. An argument can be made to convert the applications from process model to thread model, but in the real world that may not be always practical. Hopefully this helps explain the use case where this is valuable. This patch (of 3): In preparation for adding the ability to handle PUD pages, convert vm_operations_struct.pmd_fault to vm_operations_struct.huge_fault. The vm_fault structure is extended to include a union of the different page table pointers that may be needed, and three flag bits are reserved to indicate which type of pointer is in the union. [ross.zwisler@linux.intel.com: remove unused function ext4_dax_huge_fault()] Link: http://lkml.kernel.org/r/1485813172-7284-1-git-send-email-ross.zwisler@linux.intel.com [dave.jiang@intel.com: clear PMD or PUD size flags when in fall through path] Link: http://lkml.kernel.org/r/148589842696.5820.16078080610311444794.stgit@djiang5-desk3.ch.intel.com Link: http://lkml.kernel.org/r/148545058784.17912.6353162518188733642.stgit@djiang5-desk3.ch.intel.com Signed-off-by:
Ross Zwisler <ross.zwisler@linux.intel.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Jan Kara <jack@suse.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Nilesh Choudhury <nilesh.choudhury@oracle.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Dave Jiang <dave.jiang@intel.com> Signed-off-by:
-
Mel Gorman authored
As suggested by Vlastimil Babka and Tejun Heo, this patch uses a static work_struct to co-ordinate the draining of per-cpu pages on the workqueue. Only one task can drain at a time but this is better than the previous scheme that allowed multiple tasks to send IPIs at a time. One consideration is whether parallel requests should synchronise against each other. This patch does not synchronise for a global drain as the common case for such callers is expected to be multiple parallel direct reclaimers competing for pages when the watermark is close to min. Draining the per-cpu list is unlikely to make much progress and serialising the drain is of dubious merit. Drains are synchonrised for callers such as memory hotplug and CMA that care about the drain being complete when the function returns. Link: http://lkml.kernel.org/r/20170125083038.rzb5f43nptmk7aed@techsingularity.net Signed-off-by:
Mel Gorman <mgorman@techsingularity.net> Suggested-by:
Tejun Heo <tj@kernel.org> Suggested-by:
Vlastimil Babka <vbabka@suse.cz> Acked-by:
Hillf Danton <hillf.zj@alibaba-inc.com> Cc: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by:
-
Vlastimil Babka authored
Since commit 682a3385 ("mm, page_alloc: inline the fast path of the zonelist iterator") we replace a NULL nodemask with cpuset_current_mems_allowed in the fast path, so that get_page_from_freelist() filters nodes allowed by the cpuset via for_next_zone_zonelist_nodemask(). In that case it's pointless to additionaly check __cpuset_zone_allowed() in each iteration, which we can avoid by not adding ALLOC_CPUSET to alloc_flags in that scenario. This saves some cycles in the allocator fast path on systems with one or more non-root cpuset configured. In the slow path, ALLOC_CPUSET is reset according to __alloc_pages_slowpath(). Without configured cpusets, this code is disabled by a static key. Link: http://lkml.kernel.org/r/20170124150511.5710-2-vbabka@suse.cz Signed-off-by:
Anshuman Khandual <khandual@linux.vnet.ibm.com> Acked-by:
Michal Hocko <mhocko@suse.com> Cc: Anshuman Khandual <khandual@linux.vnet.ibm.com> Cc: Mel Gorman <mgorman@techsingularity.net> Signed-off-by:
-
Vlastimil Babka authored
The allocation fast path contains two similar checks for zoneref->zone being NULL, where zoneref points either to the first zone in the zonelist, or to the preferred zone. These can be NULL either due to empty zonelist, or no zone being compatible with given nodemask or task's cpuset. These checks are unnecessary, because the zonelist walks in first_zones_zonelist() and get_page_from_freelist() handle a NULL starting zoneref->zone or preferred_zoneref->zone safely. It's safe to fallback to __alloc_pages_slowpath() where we also have the check early enough. Link: http://lkml.kernel.org/r/20170124150511.5710-1-vbabka@suse.cz Signed-off-by:
-
Minchan Kim authored
zram_reset_device() waits for ongoing writepage pages to be completed by zram->refcount logic. However, it's pointless because before the reset, we prevent further opening of zram by zram->claim and flush all of pending IO by fsync_bdev so there should be no pending IO at the zram_reset_device(). So let's remove that code which is even broken due to the lack of wake_up elsewhere. Link: http://lkml.kernel.org/r/1485145031-11661-1-git-send-email-minchan@kernel.org Signed-off-by:
Minchan Kim <minchan@kernel.org> Reviewed-by:
Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Signed-off-by:
-
seokhoon.yoon authored
mmap_init() is no longer associated with VMA slab. So fix it. Link: http://lkml.kernel.org/r/1485182601-9294-1-git-send-email-iamyooon@gmail.com Signed-off-by:
seokhoon.yoon <iamyooon@gmail.com> Signed-off-by:
-
Dave Jiang authored
->fault(), ->page_mkwrite(), and ->pfn_mkwrite() calls do not need to take a vma and vmf parameter when the vma already resides in vmf. Remove the vma parameter to simplify things. [arnd@arndb.de: fix ARM build] Link: http://lkml.kernel.org/r/20170125223558.1451224-1-arnd@arndb.de Link: http://lkml.kernel.org/r/148521301778.19116.10840599906674778980.stgit@djiang5-desk3.ch.intel.com Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Reviewed-by:
-
Mel Gorman authored
Many workloads that allocate pages are not handling an interrupt at a time. As allocation requests may be from IRQ context, it's necessary to disable/enable IRQs for every page allocation. This cost is the bulk of the free path but also a significant percentage of the allocation path. This patch alters the locking and checks such that only irq-safe allocation requests use the per-cpu allocator. All others acquire the irq-safe zone->lock and allocate from the buddy allocator. It relies on disabling preemption to safely access the per-cpu structures. It could be slightly modified to avoid soft IRQs using it but it's not clear it's worthwhile. This modification may slow allocations from IRQ context slightly but the main gain from the per-cpu allocator is that it scales better for allocations from multiple contexts. There is an implicit assumption that intensive allocations from IRQ contexts on multiple CPUs from a single NUMA node are rare and that the fast majority of scaling issues are encountered in !IRQ contexts such as page faulting. It's worth noting that this patch is not required for a bulk page allocator but it significantly reduces the overhead. The following is results from a page allocator micro-benchmark. Only order-0 is interesting as higher orders do not use the per-cpu allocator 4.10.0-rc2 4.10.0-rc2 vanilla irqsafe-v1r5 Amean alloc-odr0-1 287.15 ( 0.00%) 219.00 ( 23.73%) Amean alloc-odr0-2 221.23 ( 0.00%) 183.23 ( 17.18%) Amean alloc-odr0-4 187.00 ( 0.00%) 151.38 ( 19.05%) Amean alloc-odr0-8 167.54 ( 0.00%) 132.77 ( 20.75%) Amean alloc-odr0-16 156.00 ( 0.00%) 123.00 ( 21.15%) Amean alloc-odr0-32 149.00 ( 0.00%) 118.31 ( 20.60%) Amean alloc-odr0-64 138.77 ( 0.00%) 116.00 ( 16.41%) Amean alloc-odr0-128 145.00 ( 0.00%) 118.00 ( 18.62%) Amean alloc-odr0-256 136.15 ( 0.00%) 125.00 ( 8.19%) Amean alloc-odr0-512 147.92 ( 0.00%) 121.77 ( 17.68%) Amean alloc-odr0-1024 147.23 ( 0.00%) 126.15 ( 14.32%) Amean alloc-odr0-2048 155.15 ( 0.00%) 129.92 ( 16.26%) Amean alloc-odr0-4096 164.00 ( 0.00%) 136.77 ( 16.60%) Amean alloc-odr0-8192 166.92 ( 0.00%) 138.08 ( 17.28%) Amean alloc-odr0-16384 159.00 ( 0.00%) 138.00 ( 13.21%) Amean free-odr0-1 165.00 ( 0.00%) 89.00 ( 46.06%) Amean free-odr0-2 113.00 ( 0.00%) 63.00 ( 44.25%) Amean free-odr0-4 99.00 ( 0.00%) 54.00 ( 45.45%) Amean free-odr0-8 88.00 ( 0.00%) 47.38 ( 46.15%) Amean free-odr0-16 83.00 ( 0.00%) 46.00 ( 44.58%) Amean free-odr0-32 80.00 ( 0.00%) 44.38 ( 44.52%) Amean free-odr0-64 72.62 ( 0.00%) 43.00 ( 40.78%) Amean free-odr0-128 78.00 ( 0.00%) 42.00 ( 46.15%) Amean free-odr0-256 80.46 ( 0.00%) 57.00 ( 29.16%) Amean free-odr0-512 96.38 ( 0.00%) 64.69 ( 32.88%) Amean free-odr0-1024 107.31 ( 0.00%) 72.54 ( 32.40%) Amean free-odr0-2048 108.92 ( 0.00%) 78.08 ( 28.32%) Amean free-odr0-4096 113.38 ( 0.00%) 82.23 ( 27.48%) Amean free-odr0-8192 112.08 ( 0.00%) 82.85 ( 26.08%) Amean free-odr0-16384 110.38 ( 0.00%) 81.92 ( 25.78%) Amean total-odr0-1 452.15 ( 0.00%) 308.00 ( 31.88%) Amean total-odr0-2 334.23 ( 0.00%) 246.23 ( 26.33%) Amean total-odr0-4 286.00 ( 0.00%) 205.38 ( 28.19%) Amean total-odr0-8 255.54 ( 0.00%) 180.15 ( 29.50%) Amean total-odr0-16 239.00 ( 0.00%) 169.00 ( 29.29%) Amean total-odr0-32 229.00 ( 0.00%) 162.69 ( 28.96%) Amean total-odr0-64 211.38 ( 0.00%) 159.00 ( 24.78%) Amean total-odr0-128 223.00 ( 0.00%) 160.00 ( 28.25%) Amean total-odr0-256 216.62 ( 0.00%) 182.00 ( 15.98%) Amean total-odr0-512 244.31 ( 0.00%) 186.46 ( 23.68%) Amean total-odr0-1024 254.54 ( 0.00%) 198.69 ( 21.94%) Amean total-odr0-2048 264.08 ( 0.00%) 208.00 ( 21.24%) Amean total-odr0-4096 277.38 ( 0.00%) 219.00 ( 21.05%) Amean total-odr0-8192 279.00 ( 0.00%) 220.92 ( 20.82%) Amean total-odr0-16384 269.38 ( 0.00%) 219.92 ( 18.36%) This is the alloc, free and total overhead of allocating order-0 pages in batches of 1 page up to 16384 pages. Avoiding disabling/enabling overhead massively reduces overhead. Alloc overhead is roughly reduced by 14-20% in most cases. The free path is reduced by 26-46% and the total reduction is significant. Many users require zeroing of pages from the page allocator which is the vast cost of allocation. Hence, the impact on a basic page faulting benchmark is not that significant 4.10.0-rc2 4.10.0-rc2 vanilla irqsafe-v1r5 Hmean page_test 656632.98 ( 0.00%) 675536.13 ( 2.88%) Hmean brk_test 3845502.67 ( 0.00%) 3867186.94 ( 0.56%) Stddev page_test 10543.29 ( 0.00%) 4104.07 ( 61.07%) Stddev brk_test 33472.36 ( 0.00%) 15538.39 ( 53.58%) CoeffVar page_test 1.61 ( 0.00%) 0.61 ( 62.15%) CoeffVar brk_test 0.87 ( 0.00%) 0.40 ( 53.84%) Max page_test 666513.33 ( 0.00%) 678640.00 ( 1.82%) Max brk_test 3882800.00 ( 0.00%) 3887008.66 ( 0.11%) This is from aim9 and the most notable outcome is that fault variability is reduced by the patch. The headline improvement is small as the overall fault cost, zeroing, page table insertion etc dominate relative to disabling/enabling IRQs in the per-cpu allocator. Similarly, little benefit was seen on networking benchmarks both localhost and between physical server/clients where other costs dominate. It's possible that this will only be noticable on very high speed networks. Jesper Dangaard Brouer independently tested this with a separate microbenchmark from https://github.com/netoptimizer/prototype-kernel/tree/master/kernel/mm/bench Micro-benchmarked with [1] page_bench02: modprobe page_bench02 page_order=0 run_flags=$((2#010)) loops=$((10**8)); \ rmmod page_bench02 ; dmesg --notime | tail -n 4 Compared to baseline: 213 cycles(tsc) 53.417 ns - against this : 184 cycles(tsc) 46.056 ns - Saving : -29 cycles - Very close to expected 27 cycles saving [see below [2]] Micro benchmarking via time_bench_sample[3], we get the cost of these operations: time_bench: Type:for_loop Per elem: 0 cycles(tsc) 0.232 ns (step:0) time_bench: Type:spin_lock_unlock Per elem: 33 cycles(tsc) 8.334 ns (step:0) time_bench: Type:spin_lock_unlock_irqsave Per elem: 62 cycles(tsc) 15.607 ns (step:0) time_bench: Type:irqsave_before_lock Per elem: 57 cycles(tsc) 14.344 ns (step:0) time_bench: Type:spin_lock_unlock_irq Per elem: 34 cycles(tsc) 8.560 ns (step:0) time_bench: Type:simple_irq_disable_before_lock Per elem: 37 cycles(tsc) 9.289 ns (step:0) time_bench: Type:local_BH_disable_enable Per elem: 19 cycles(tsc) 4.920 ns (step:0) time_bench: Type:local_IRQ_disable_enable Per elem: 7 cycles(tsc) 1.864 ns (step:0) time_bench: Type:local_irq_save_restore Per elem: 38 cycles(tsc) 9.665 ns (step:0) [Mel's patch removes a ^^^^^^^^^^^^^^^^] ^^^^^^^^^ expected saving - preempt cost time_bench: Type:preempt_disable_enable Per elem: 11 cycles(tsc) 2.794 ns (step:0) [adds a preempt ^^^^^^^^^^^^^^^^^^^^^^] ^^^^^^^^^ adds this cost time_bench: Type:funcion_call_cost Per elem: 6 cycles(tsc) 1.689 ns (step:0) time_bench: Type:func_ptr_call_cost Per elem: 11 cycles(tsc) 2.767 ns (step:0) time_bench: Type:page_alloc_put Per elem: 211 cycles(tsc) 52.803 ns (step:0) Thus, expected improvement is: 38-11 = 27 cycles. [mgorman@techsingularity.net: s/preempt_enable_no_resched/preempt_enable/] Link: http://lkml.kernel.org/r/20170208143128.25ahymqlyspjcixu@techsingularity.net Link: http://lkml.kernel.org/r/20170123153906.3122-5-mgorman@techsingularity.net Signed-off-by:Jesper Dangaard Brouer <brouer@redhat.com> Acked-by:
-
Michal Hocko authored
Dmitry has reported the following lockdep splat lock_acquire+0x2a1/0x630 kernel/locking/lockdep.c:3753 __mutex_lock_common kernel/locking/mutex.c:521 [inline] mutex_lock_nested+0x24e/0xff0 kernel/locking/mutex.c:621 pcpu_alloc+0xbda/0x1280 mm/percpu.c:896 __alloc_percpu+0x24/0x30 mm/percpu.c:1075 smpcfd_prepare_cpu+0x73/0xd0 kernel/smp.c:44 cpuhp_invoke_callback+0x254/0x1480 kernel/cpu.c:136 cpuhp_up_callbacks+0x81/0x2a0 kernel/cpu.c:493 _cpu_up+0x1e3/0x2a0 kernel/cpu.c:1057 do_cpu_up+0x73/0xa0 kernel/cpu.c:1087 cpu_up+0x18/0x20 kernel/cpu.c:1095 smp_init+0xe9/0xee kernel/smp.c:564 kernel_init_freeable+0x439/0x690 init/main.c:1010 kernel_init+0x13/0x180 init/main.c:941 ret_from_fork+0x2a/0x40 arch/x86/entry/entry_64.S:433 cpu_hotplug_begin cpu_hotplug.lock pcpu_alloc pcpu_alloc_mutex get_online_cpus+0x62/0x90 kernel/cpu.c:248 drain_all_pages+0xf8/0x710 mm/page_alloc.c:2385 __alloc_pages_direct_reclaim mm/page_alloc.c:3440 [inline] __alloc_pages_slowpath+0x8fd/0x2370 mm/page_alloc.c:3778 __alloc_pages_nodemask+0x8f5/0xc60 mm/page_alloc.c:3980 __alloc_pages include/linux/gfp.h:426 [inline] __alloc_pages_node include/linux/gfp.h:439 [inline] alloc_pages_node include/linux/gfp.h:453 [inline] pcpu_alloc_pages mm/percpu-vm.c:93 [inline] pcpu_populate_chunk+0x1e1/0x900 mm/percpu-vm.c:282 pcpu_alloc+0xe01/0x1280 mm/percpu.c:998 __alloc_percpu_gfp+0x27/0x30 mm/percpu.c:1062 bpf_array_alloc_percpu kernel/bpf/arraymap.c:34 [inline] array_map_alloc+0x532/0x710 kernel/bpf/arraymap.c:99 find_and_alloc_map kernel/bpf/syscall.c:34 [inline] map_create kernel/bpf/syscall.c:188 [inline] SYSC_bpf kernel/bpf/syscall.c:870 [inline] SyS_bpf+0xd64/0x2500 kernel/bpf/syscall.c:827 entry_SYSCALL_64_fastpath+0x1f/0xc2 pcpu_alloc pcpu_alloc_mutex drain_all_pages get_online_cpus cpu_hotplug.lock cpu_hotplug_begin+0x206/0x2e0 kernel/cpu.c:304 _cpu_up+0xca/0x2a0 kernel/cpu.c:1011 do_cpu_up+0x73/0xa0 kernel/cpu.c:1087 cpu_up+0x18/0x20 kernel/cpu.c:1095 smp_init+0xe9/0xee kernel/smp.c:564 kernel_init_freeable+0x439/0x690 init/main.c:1010 kernel_init+0x13/0x180 init/main.c:941 ret_from_fork+0x2a/0x40 arch/x86/entry/entry_64.S:433 cpu_hotplug_begin cpu_hotplug.lock Pulling cpu hotplug locks inside the page allocator is just too dangerous. Let's remove the dependency by dropping get_online_cpus() from drain_all_pages. This is not so simple though because now we do not have a protection against cpu hotplug which means 2 things: - the work item might be executed on a different cpu in worker from unbound pool so it doesn't run on pinned on the cpu - we have to make sure that we do not race with page_alloc_cpu_dead calling drain_pages_zone Disabling preemption in drain_local_pages_wq will solve the first problem drain_local_pages will determine its local CPU from the WQ context which will be stable after that point, page_alloc_cpu_dead is pinned to the CPU already. The later condition is achieved by disabling IRQs in drain_pages_zone. Fixes: mm, page_alloc: drain per-cpu pages from workqueue context Link: http://lkml.kernel.org/r/20170207201950.20482-1-mhocko@kernel.org Signed-off-by:Dmitry Vyukov <dvyukov@google.com> Acked-by:
-
Mel Gorman authored
The per-cpu page allocator can be drained immediately via drain_all_pages() which sends IPIs to every CPU. In the next patch, the per-cpu allocator will only be used for interrupt-safe allocations which prevents draining it from IPI context. This patch uses workqueues to drain the per-cpu lists instead. This is slower but no slowdown during intensive reclaim was measured and the paths that use drain_all_pages() are not that sensitive to performance. This is particularly true as the path would only be triggered when reclaim is failing. It also makes a some sense to avoid storming a machine with IPIs when it's under memory pressure. Arguably, it should be further adjusted so that only one caller at a time is draining pages but it's beyond the scope of the current patch. Link: http://lkml.kernel.org/r/20170123153906.3122-4-mgorman@techsingularity.net Signed-off-by:
-
Mel Gorman authored
alloc_pages_nodemask does a number of preperation steps that determine what zones can be used for the allocation depending on a variety of factors. This is fine but a hypothetical caller that wanted multiple order-0 pages has to do the preparation steps multiple times. This patch structures __alloc_pages_nodemask such that it's relatively easy to build a bulk order-0 page allocator. There is no functional change. Link: http://lkml.kernel.org/r/20170123153906.3122-3-mgorman@techsingularity.net Signed-off-by:
-
Mel Gorman authored
Patch series "Use per-cpu allocator for !irq requests and prepare for a bulk allocator", v5. This series is motivated by a conversation led by Jesper Dangaard Brouer at the last LSF/MM proposing a generic page pool for DMA-coherent pages. Part of his motivation was due to the overhead of allocating multiple order-0 that led some drivers to use high-order allocations and splitting them. This is very slow in some cases. The first two patches in this series restructure the page allocator such that it is relatively easy to introduce an order-0 bulk page allocator. A patch exists to do that and has been handed over to Jesper until an in-kernel users is created. The third patch prevents the per-cpu allocator being drained from IPI context as that can potentially corrupt the list after patch four is merged. The final patch alters the per-cpu alloctor to make it exclusive to !irq requests. This cuts allocation/free overhead by roughly 30%. Performance tests from both Jesper and me are included in the patch. This patch (of 4): buffered_rmqueue removes a page from a given zone and uses the per-cpu list for order-0. This is fine but a hypothetical caller that wanted multiple order-0 pages has to disable/reenable interrupts multiple times. This patch structures buffere_rmqueue such that it's relatively easy to build a bulk order-0 page allocator. There is no functional change. [mgorman@techsingularity.net: failed per-cpu refill may blow up] Link: http://lkml.kernel.org/r/20170124112723.mshmgwq2ihxku2um@techsingularity.net Link: http://lkml.kernel.org/r/20170123153906.3122-2-mgorman@techsingularity.net Signed-off-by:
-
Johannes Weiner authored
We noticed a performance regression when moving hadoop workloads from 3.10 kernels to 4.0 and 4.6. This is accompanied by increased pageout activity initiated by kswapd as well as frequent bursts of allocation stalls and direct reclaim scans. Even lowering the dirty ratios to the equivalent of less than 1% of memory would not eliminate the issue, suggesting that dirty pages concentrate where the scanner is looking. This can be traced back to recent efforts of thrash avoidance. Where 3.10 would not detect refaulting pages and continuously supply clean cache to the inactive list, a thrashing workload on 4.0+ will detect and activate refaulting pages right away, distilling used-once pages on the inactive list much more effectively. This is by design, and it makes sense for clean cache. But for the most part our workload's cache faults are refaults and its use-once cache is from streaming writes. We end up with most of the inactive list dirty, and we don't go after the active cache as long as we have use-once pages around. But waiting for writes to avoid reclaiming clean cache that *might* refault is a bad trade-off. Even if the refaults happen, reads are faster than writes. Before getting bogged down on writeback, reclaim should first look at *all* cache in the system, even active cache. To accomplish this, activate pages that are dirty or under writeback when they reach the end of the inactive LRU. The pages are marked for immediate reclaim, meaning they'll get moved back to the inactive LRU tail as soon as they're written back and become reclaimable. But in the meantime, by reducing the inactive list to only immediately reclaimable pages, we allow the scanner to deactivate and refill the inactive list with clean cache from the active list tail to guarantee forward progress. [hannes@cmpxchg.org: update comment] Link: http://lkml.kernel.org/r/20170202191957.22872-8-hannes@cmpxchg.org Link: http://lkml.kernel.org/r/20170123181641.23938-6-hannes@cmpxchg.org Signed-off-by:
Johannes Weiner <hannes@cmpxchg.org> Acked-by:
-
Johannes Weiner authored
Dirty pages can easily reach the end of the LRU while there are still clean pages to reclaim around. Don't let kswapd write them back just because there are a lot of them. It costs more CPU to find the clean pages, but that's almost certainly better than to disrupt writeback from the flushers with LRU-order single-page writes from reclaim. And the flushers have been woken up by that point, so we spend IO capacity on flushing and CPU capacity on finding the clean cache. Only start writing dirty pages if they have cycled around the LRU twice now and STILL haven't been queued on the IO device. It's possible that the dirty pages are so sparsely distributed across different bdis, inodes, memory cgroups, that the flushers take forever to get to the ones we want reclaimed. Once we see them twice on the LRU, we know that's the quicker way to find them, so do LRU writeback. Link: http://lkml.kernel.org/r/20170123181641.23938-5-hannes@cmpxchg.org Signed-off-by:
Mel Gorman <mgorman@suse.de> Acked-by:
-
Johannes Weiner authored
Direct reclaim has been replaced by kswapd reclaim in pretty much all common memory pressure situations, so this code most likely doesn't accomplish the described effect anymore. The previous patch wakes up flushers for all reclaimers when we encounter dirty pages at the tail end of the LRU. Remove the crufty old direct reclaim invocation. Link: http://lkml.kernel.org/r/20170123181641.23938-4-hannes@cmpxchg.org Signed-off-by:
-
Johannes Weiner authored
Memory pressure can put dirty pages at the end of the LRU without anybody running into dirty limits. Don't start writing individual pages from kswapd while the flushers might be asleep. Unlike the old direct reclaim flusher wakeup (removed in the next patch) that flushes the number of pages just scanned, this patch wakes the flushers for all outstanding dirty pages. That seemed to perform better in a synthetic test that pushes dirty pages to the end of the LRU and into reclaim, because we know LRU aging outstrips writeback already, and this way we give younger dirty pages a headstart rather than wait until reclaim runs into them as well. It also means less plugging and risk of exhausting the struct request pool from reclaim. There is a concern that this will cause temporary files that used to get dirtied and truncated before writeback to now get written to disk under memory pressure. If this turns out to be a real problem, we'll have to revisit this and tame the reclaim flusher wakeups. [hannes@cmpxchg.org: mention dirty expiration as a condition] Link: http://lkml.kernel.org/r/20170126174739.GA30636@cmpxchg.org Link: http://lkml.kernel.org/r/20170123181641.23938-3-hannes@cmpxchg.org Signed-off-by:
-
Johannes Weiner authored
Patch series "mm: vmscan: fix kswapd writeback regression". We noticed a regression on multiple hadoop workloads when moving from 3.10 to 4.0 and 4.6, which involves kswapd getting tangled up in page writeout, causing direct reclaim herds that also don't make progress. I tracked it down to the thrash avoidance efforts after 3.10 that make the kernel better at keeping use-once cache and use-many cache sorted on the inactive and active list, with more aggressive protection of the active list as long as there is inactive cache. Unfortunately, our workload's use-once cache is mostly from streaming writes. Waiting for writes to avoid potential reloads in the future is not a good tradeoff. These patches do the following: 1. Wake the flushers when kswapd sees a lump of dirty pages. It's possible to be below the dirty background limit and still have cache velocity push them through the LRU. So start a-flushin'. 2. Let kswapd only write pages that have been rotated twice. This makes sure we really tried to get all the clean pages on the inactive list before resorting to horrible LRU-order writeback. 3. Move rotating dirty pages off the inactive list. Instead of churning or waiting on page writeback, we'll go after clean active cache. This might lead to thrashing, but in this state memory demand outstrips IO speed anyway, and reads are faster than writes. Mel backported the series to 4.10-rc5 with one minor conflict and ran a couple of tests on it. Mix of read/write random workload didn't show anything interesting. Write-only database didn't show much difference in performance but there were slight reductions in IO -- probably in the noise. simoop did show big differences although not as big as Mel expected. This is Chris Mason's workload that similate the VM activity of hadoop. Mel won't go through the full details but over the samples measured during an hour it reported 4.10.0-rc5 4.10.0-rc5 vanilla johannes-v1r1 Amean p50-Read 21346531.56 ( 0.00%) 21697513.24 ( -1.64%) Amean p95-Read 24700518.40 ( 0.00%) 25743268.98 ( -4.22%) Amean p99-Read 27959842.13 ( 0.00%) 28963271.11 ( -3.59%) Amean p50-Write 1138.04 ( 0.00%) 989.82 ( 13.02%) Amean p95-Write 1106643.48 ( 0.00%) 12104.00 ( 98.91%) Amean p99-Write 1569213.22 ( 0.00%) 36343.38 ( 97.68%) Amean p50-Allocation 85159.82 ( 0.00%) 79120.70 ( 7.09%) Amean p95-Allocation 204222.58 ( 0.00%) 129018.43 ( 36.82%) Amean p99-Allocation 278070.04 ( 0.00%) 183354.43 ( 34.06%) Amean final-p50-Read 21266432.00 ( 0.00%) 21921792.00 ( -3.08%) Amean final-p95-Read 24870912.00 ( 0.00%) 26116096.00 ( -5.01%) Amean final-p99-Read 28147712.00 ( 0.00%) 29523968.00 ( -4.89%) Amean final-p50-Write 1130.00 ( 0.00%) 977.00 ( 13.54%) Amean final-p95-Write 1033216.00 ( 0.00%) 2980.00 ( 99.71%) Amean final-p99-Write 1517568.00 ( 0.00%) 32672.00 ( 97.85%) Amean final-p50-Allocation 86656.00 ( 0.00%) 78464.00 ( 9.45%) Amean final-p95-Allocation 211712.00 ( 0.00%) 116608.00 ( 44.92%) Amean final-p99-Allocation 287232.00 ( 0.00%) 168704.00 ( 41.27%) The latencies are actually completely horrific in comparison to 4.4 (and 4.10-rc5 is worse than 4.9 according to historical data for reasons Mel hasn't analysed yet). Still, 95% of write latency (p95-write) is halved by the series and allocation latency is way down. Direct reclaim activity is one fifth of what it was according to vmstats. Kswapd activity is higher but this is not necessarily surprising. Kswapd efficiency is unchanged at 99% (99% of pages scanned were reclaimed) but direct reclaim efficiency went from 77% to 99% In the vanilla kernel, 627MB of data was written back from reclaim context. With the series, no data was written back. With or without the patch, pages are being immediately reclaimed after writeback completes. However, with the patch, only 1/8th of the pages are reclaimed like this. This patch (of 5): We have an elaborate dirty/writeback throttling mechanism inside the reclaim scanner, but for that to work the pages have to go through shrink_page_list() and get counted for what they are. Otherwise, we mess up the LRU order and don't match reclaim speed to writeback. Especially during deactivation, there is never a reason to skip dirty pages; nothing is even trying to write them out from there. Don't mess up the LRU order for nothing, shuffle these pages along. Link: http://lkml.kernel.org/r/20170123181641.23938-2-hannes@cmpxchg.org Signed-off-by: -
Mike Rapoport authored
Now when madvise(MADV_REMOVE) notifies uffd reader, we should verify that appliciation actually sees zeros at the removed range. Link: http://lkml.kernel.org/r/1484814154-1557-4-git-send-email-rppt@linux.vnet.ibm.com Signed-off-by:
Mike Rapoport <rppt@linux.vnet.ibm.com> Reviewed-by:
Andrea Arcangeli <aarcange@redhat.com> Cc: Hillf Danton <hillf.zj@alibaba-inc.com> Signed-off-by:
-
Mike Rapoport authored
When a page is removed from a shared mapping, the uffd reader should be notified, so that it won't attempt to handle #PF events for the removed pages. We can reuse the UFFD_EVENT_REMOVE because from the uffd monitor point of view, the semantices of madvise(MADV_DONTNEED) and madvise(MADV_REMOVE) is exactly the same. Link: http://lkml.kernel.org/r/1484814154-1557-3-git-send-email-rppt@linux.vnet.ibm.com Signed-off-by:
Pavel Emelyanov <xemul@virtuozzo.com> Signed-off-by:
-
Mike Rapoport authored
Patch series "userfaultfd: non-cooperative: add madvise() event for MADV_REMOVE request". These patches add notification of madvise(MADV_REMOVE) event to non-cooperative userfaultfd monitor. The first pacth renames EVENT_MADVDONTNEED to EVENT_REMOVE along with relevant functions and structures. Using _REMOVE instead of _MADVDONTNEED describes the event semantics more clearly and I hope it's not too late for such change in the ABI. This patch (of 3): The UFFD_EVENT_MADVDONTNEED purpose is to notify uffd monitor about removal of certain range from address space tracked by userfaultfd. Hence, UFFD_EVENT_REMOVE seems to better reflect the operation semantics. Respectively, 'madv_dn' field of uffd_msg is renamed to 'remove' and the madvise_userfault_dontneed callback is renamed to userfaultfd_remove. Link: http://lkml.kernel.org/r/1484814154-1557-2-git-send-email-rppt@linux.vnet.ibm.com Signed-off-by:
-
Heiko Carstens authored
Provide the name of each memblock type with struct memblock_type. This allows to get rid of the function memblock_type_name() and duplicating the type names in __memblock_dump_all(). The only memblock_type usage out of mm/memblock.c seems to be arch/s390/kernel/crash_dump.c. While at it, give it a name. Link: http://lkml.kernel.org/r/20170120123456.46508-4-heiko.carstens@de.ibm.com Signed-off-by:
Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Philipp Hachtmann <phacht@linux.vnet.ibm.com> Signed-off-by:
-
Heiko Carstens authored
Since commit 70210ed9 ("mm/memblock: add physical memory list") the memblock structure knows about a physical memory list. The physical memory list should also be dumped if memblock_dump_all() is called in case memblock_debug is switched on. This makes debugging a bit easier. Link: http://lkml.kernel.org/r/20170120123456.46508-3-heiko.carstens@de.ibm.com Signed-off-by:
-
Heiko Carstens authored
Since commit 70210ed9 ("mm/memblock: add physical memory list") the memblock structure knows about a physical memory list. memblock_type_name() should return "physmem" instead of "unknown" if the name of the physmem memblock_type is being asked for. Link: http://lkml.kernel.org/r/20170120123456.46508-2-heiko.carstens@de.ibm.com Signed-off-by:
-
Andrew Morton authored
It has no modular callers. Cc: Dan Williams <dan.j.williams@intel.com> Signed-off-by:
-
Dan Williams authored
mem_hotplug_begin() assumes that it can set mem_hotplug.active_writer and run the hotplug process without racing another thread. Validate this assumption with a lockdep assertion. Link: http://lkml.kernel.org/r/148693886229.16345.1770484669403334689.stgit@dwillia2-desk3.amr.corp.intel.com Signed-off-by:
Dan Williams <dan.j.williams@intel.com> Reported-by:
Ben Hutchings <ben@decadent.org.uk> Cc: Michal Hocko <mhocko@suse.com> Cc: Toshi Kani <toshi.kani@hpe.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Logan Gunthorpe <logang@deltatee.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Masayoshi Mizuma <m.mizuma@jp.fujitsu.com> Signed-off-by:
-
Dan Williams authored
The mem_hotplug_{begin,done} lock coordinates with {get,put}_online_mems() to hold off "readers" of the current state of memory from new hotplug actions. mem_hotplug_begin() expects exclusive access, via the device_hotplug lock, to set mem_hotplug.active_writer. Calling mem_hotplug_begin() without locking device_hotplug can lead to corrupting mem_hotplug.refcount and missed wakeups / soft lockups. [dan.j.williams@intel.com: v2] Link: http://lkml.kernel.org/r/148728203365.38457.17804568297887708345.stgit@dwillia2-desk3.amr.corp.intel.com Link: http://lkml.kernel.org/r/148693885680.16345.17802627926777862337.stgit@dwillia2-desk3.amr.corp.intel.com Fixes: f931ab47 ("mm: fix devm_memremap_pages crash, use mem_hotplug_{begin, done}") Signed-off-by: -
David Rientjes authored
Commit 82e7d3ab ("oom: print nodemask in the oom report") implicitly sets the allocation nodemask to cpuset_current_mems_allowed when there is no effective mempolicy. cpuset_current_mems_allowed is only effective when cpusets are enabled, which is also printed by dump_header(), so setting the nodemask to cpuset_current_mems_allowed is redundant and prevents debugging issues where ac->nodemask is not set properly in the page allocator. This provides better debugging output since cpuset_print_current_mems_allowed() is already provided. [rientjes@google.com: newline per Hillf] Link: http://lkml.kernel.org/r/alpine.DEB.2.10.1701200158300.88321@chino.kir.corp.google.com Link: http://lkml.kernel.org/r/alpine.DEB.2.10.1701191454470.2381@chino.kir.corp.google.com Signed-off-by:
David Rientjes <rientjes@google.com> Suggested-by:
-
Claudio Imbrenda authored
Some architectures have a set of zero pages (coloured zero pages) instead of only one zero page, in order to improve the cache performance. In those cases, the kernel samepage merger (KSM) would merge all the allocated pages that happen to be filled with zeroes to the same deduplicated page, thus losing all the advantages of coloured zero pages. This behaviour is noticeable when a process accesses large arrays of allocated pages containing zeroes. A test I conducted on s390 shows that there is a speed penalty when KSM merges such pages, compared to not merging them or using actual zero pages from the start without breaking the COW. This patch fixes this behaviour. When coloured zero pages are present, the checksum of a zero page is calculated during initialisation, and compared with the checksum of the current canditate during merging. In case of a match, the normal merging routine is used to merge the page with the correct coloured zero page, which ensures the candidate page is checked to be equal to the target zero page. A sysfs entry is also added to toggle this behaviour, since it can potentially introduce performance regressions, especially on architectures without coloured zero pages. The default value is disabled, for backwards compatibility. With this patch, the performance with KSM is the same as with non COW-broken actual zero pages, which is also the same as without KSM. [akpm@linux-foundation.org: make zero_checksum and ksm_use_zero_pages __read_mostly, per Andrea] [imbrenda@linux.vnet.ibm.com: documentation for coloured zero pages deduplication] Link: http://lkml.kernel.org/r/1484927522-1964-1-git-send-email-imbrenda@linux.vnet.ibm.com Link: http://lkml.kernel.org/r/1484850953-23941-1-git-send-email-imbrenda@linux.vnet.ibm.com Signed-off-by:
Claudio Imbrenda <imbrenda@linux.vnet.ibm.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Hugh Dickins <hughd@google.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Signed-off-by:
-
Davidlohr Bueso authored
Given that the arch does not add its own implementations, simply use the asm-generic/current.h (generic-y) header instead of duplicating code. Link: http://lkml.kernel.org/r/1485992878-4780-3-git-send-email-dave@stgolabs.net Signed-off-by:
Davidlohr Bueso <dbueso@suse.de> Cc: Mikael Starvik <starvik@axis.com> Cc: Jesper Nilsson <jesper.nilsson@axis.com> Signed-off-by:
-
- Feb 24, 2017
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespaceLinus Torvalds authored
Pull namespace updates from Eric Biederman: "There is a lot here. A lot of these changes result in subtle user visible differences in kernel behavior. I don't expect anything will care but I will revert/fix things immediately if any regressions show up. From Seth Forshee there is a continuation of the work to make the vfs ready for unpriviled mounts. We had thought the previous changes prevented the creation of files outside of s_user_ns of a filesystem, but it turns we missed the O_CREAT path. Ooops. Pavel Tikhomirov and Oleg Nesterov worked together to fix a long standing bug in the implemenation of PR_SET_CHILD_SUBREAPER where only children that are forked after the prctl are considered and not children forked before the prctl. The only known user of this prctl systemd forks all children after the prctl. So no userspace regressions will occur. Holding earlier forked children to...
-
git://people.freedesktop.org/~airlied/linuxLinus Torvalds authored
Pull drm updates from Dave Airlie: "This is the main drm pull request for v4.11. Nothing too major, the tinydrm and mmu-less support should make writing smaller drivers easier for some of the simpler platforms, and there are a bunch of documentation updates. Intel grew displayport MST audio support which is hopefully useful to people, and FBC is on by default for GEN9+ (so people know where to look for regressions). AMDGPU has a lot of fixes that would like new firmware files installed for some GPUs. Other than that it's pretty scattered all over. I may have a follow up pull request as I know BenH has a bunch of AST rework and fixes and I'd like to get those in once they've been tested by AST, and I've got at least one pull request I'm just trying to get the author to fix up. Core: - drm_mm reworked - Connector list locking and iterators - Documentation updates - Format handling...
-
Dave Airlie authored
Linus doesn't like it user selectable, so kill it until someone needs it for something else. Signed-off-by:Dave Airlie <airlied@redhat.com>
-
Noralf Trønnes authored
BACKLIGHT_CLASS_DEVICE was selected in the last version of the tinydrm patchset to fix the backlight dependency, but the ifdef CONFIG_BACKLIGHT_CLASS_DEVICE was forgotten. Fix that. Signed-off-by:
Noralf Trønnes <noralf@tronnes.org> Signed-off-by:
-
Noralf Trønnes authored
This warning is seen on 64-bit builds in functions: 'mipi_dbi_typec1_command': 'mipi_dbi_typec3_command_read': 'mipi_dbi_typec3_command': >> drivers/gpu/drm/tinydrm/mipi-dbi.c:65:20: warning: field width specifier '*' expects argument of type 'int', but argument 5 has type 'size_t {aka long unsigned int}' [-Wformat=] DRM_DEBUG_DRIVER("cmd=%02x, par=%*ph\n", cmd, len, data); \ ^ include/drm/drmP.h:228:40: note: in definition of macro 'DRM_DEBUG_DRIVER' drm_printk(KERN_DEBUG, DRM_UT_DRIVER, fmt, ##__VA_ARGS__) ^~~ >> drivers/gpu/drm/tinydrm/mipi-dbi.c:671:2: note: in expansion of macro 'MIPI_DBI_DEBUG_COMMAND' MIPI_DBI_DEBUG_COMMAND(cmd, parameters, num); ^~~~~~~~~~~~~~~~~~~~~~ Fix by casting 'len' to int in the macro MIPI_DBI_DEBUG_COMMAND(). There is no chance of overflow. Signed-off-by: -
Noralf Trønnes authored
Fix this warning: drivers/gpu/drm/tinydrm/mipi-dbi.c: In function ‘mipi_dbi_debugfs_command_write’: drivers/gpu/drm/tinydrm/mipi-dbi.c:905:8: warning: ‘cmd’ may be used uninitialized in this function [-Wmaybe-uninitialized] ret = mipi_dbi_command_buf(mipi, cmd, parameters, i); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ cmd can't be used uninitialized, but to satisfy the compiler, initialize it to zero. Signed-off-by: -
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linuxLinus Torvalds authored
Pull usercopy test fix from Kees Cook: "Fix for non-MMU ARM testing, from Arnd Bergmann" * tag 'usercopy-v4.11-rc1.fix' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: usercopy: ARM NOMMU has no 64-bit get_user
-
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds authored
Pull ARM SoC driver updates from Arnd Bergmann: "Driver updates for ARM SoCs. A handful of driver changes this time around. The larger changes are: - Reset drivers for hi3660 and zx2967 - AHCI driver for Davinci, acked by Tejun and brought in here due to platform dependencies - Cleanups of atmel-ebi (External Bus Interface) - Tweaks for Rockchip GRF (General Register File) usage (kitchensink misc register range on the SoCs) - PM domains changes for support of two new ZTE SoCs (zx296718 and zx2967)" * tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (53 commits) soc: samsung: pmu: Add register defines for pad retention control reset: make zx2967 explicitly non-modular reset: core: fix reset_control_put soc: samsung: pm_domains: Read domain name from the new label property soc: samsung: pm_domains: Remove message about failed memory alloc... -
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds authored
Pull ARM 64-bit DT updates from Arnd Bergmann: "ARM64 DT updates are fairly small this time, only two new SoCs and a handful of new machines get added, all of them similar to other hardware we already support. New SoC: - HiSilicon Kirin960/Hi3660 and HiKey960 development board - NXP LS1012a with three reference boards: http://www.nxp.com/products/microcontrollers-and-processors/arm-processors/qoriq-layerscape-arm-processors/qoriq-layerscape-1012a-low-power-communication-processor:LS1012A New development board: - Banana Pi M64, based on Allwinner A64: http://www.banana-pi.org/m64.html - SolidRun MACCHIATOBin based on Marvell Armada 8K: https://www.solid-run.com/marvell-armada-family/armada-8040-community-board/ - Broadcom BCM958712DxXMC NorthStar2 reference board (another one) A lot of platforms improve support for existing machines by adding extra devices for which a binding and driver is availabe: Allwinner: - MMC, USB ARM Juno: - Coresight, STM Broadcom: - NS2 GICv2m irqchip and PCIe Marvell: - Armada 3700 SPI, I2C, ethernet switch Mediatek: - MT8173 thermal NXP i.MX: - LS1046A thermal Qualcomm: - coresight on MSM8916, HDMI, WCNSS, SCM Renesas: - r8a779[56] thermal, powerdomain, ethernet, sound, pwm, can, can fd Rockchip: - thermal, eDP, pinctrl enhancements Samsung: - TM2 touchkey, Exynos5433 HDMI and power management improvements UniPhier: - SD reset, eMMC controller ZTE: - oppv2 cpufreq" * tag 'armsoc-dt64' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (110 commits) arm64: dts: qcom: Add msm8916 CoreSight components arm64: dts: marvell: adjust name of sd-mmc-gop clock in syscon arm64: allwinner: add BananaPi-M64 support arm64: allwinner: a64: add UART1 pin nodes arm64: allwinner: pine64: add MMC support arm64: allwinner: a64: Increase the MMC max frequency arm64: allwinner: a64: Add MMC pinctrl nodes arm64: allwinner: a64: Add MMC nodes dt-bindings: clockgen: Add compatible string for LS1012A Documentation: DT: add LS1012A compatible for SCFG and DCFG Documentation: DT: Add entry for FSL LS1012A RDB, FRDM, QDS boards arm64: dts: marvell: add generic-ahci compatibles for CP110 ahci arm64: tegra: Use symbolic reset identifiers arm64: dts: r8a7796: Mark EthernetAVB device node disabled arm64: dts: r8a7795: Mark EthernetAVB device node disabled arm64: dts: r8a7795: tidyup audma definition order arm64: dts: r8a7796: Link ARM GIC to clock and clock domain arm64: dts: r8a7795: Link ARM GIC to clock and clock domain arm64: dts: r8a7796: Add R-Car Gen3 thermal support arm64: dts: r8a7795: Add R-Car Gen3 thermal support ...
-
