- Aug 08, 2023
-
-
Yang Yingliang authored
Use memdup_user_nul() helper instead of open-coding to simplify the code. Signed-off-by:
Yang Yingliang <yangyingliang@huawei.com> Link: https://lore.kernel.org/r/20230725120247.509422-1-yangyingliang@huawei.com Signed-off-by:
Mark Brown <broonie@kernel.org>
-
Hans de Goede authored
If SNDRV_PCM_IOCTL_PREPARE is called when the mixer settings linking frontend and backend have not been setup yet this results in e.g. the following errors getting logged: [ 43.244549] Baytrail Audio Port: ASoC: no backend DAIs enabled for Baytrail Audio Port [ 43.244744] Baytrail Audio Port: ASoC: error at dpcm_fe_dai_prepare on Baytrail Audio Port: -22 pipewire triggers this leading to 96 lines getting logged after the user has logged into a GNOME session. Change the actual "no backend DAIs enabled for ... Port" error to dev_err_once() to avoid it getting repeated 48 times. While at it also improve the error by hinting the user how to fix this. To not make developing new UCM profiles harder, also log the error at dev_dbg() level all the time (vs once). So that e.g. dyndbg can be used to (re)enable the messages. Also changes _soc_pcm_ret() to not log for -EINVAL errors, to fix the other error getting logged 48 times. Userspace passing wrong parameters should not lead to dmesg messages. Link: https://gitlab.freedesktop.org/pipewire/pipewire/-/issues/3407 Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Reviewed-by:
Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20230805171435.31696-1-hdegoede@redhat.com Signed-off-by:
-
Mark Brown authored
Merge series from Alper Nebi Yasak <alpernebiyasak@gmail.com>: This patchset adds missing jack kcontrols for each independently detectable audio peripheral and maps jack pins to those kcontrols accordingly, with the primary intent to enable/improve jack detection handling in PulseAudio and PipeWire through JackControl UCM values. Usually it's just splitting a joint anything-is-connected "Headset Jack" kcontrol (from [1]) into those like "Headphone Jack" and "Headset Mic" (similar to a previous series for Intel Chromebooks [2]). This split is important to avoid automatically switching to a nonexistent external microphone when a headphone-only device is connected. When the underlying hardware seems to support it, this also adds a "Line Out" kcontrol. This is important in case the hardware can actually support a line-level connection via a different configuration (bypassing output amplifiers?), or simply for userspace to display "Line Out" instead of "Headphones" to the user for connected line-out devices. Beyond the mappings, I had to add PIN_SWITCH card kcontrols and DAPM widgets to avoid "unknown pin" errors on my devices, so tried to do them for all. For Intel devices I saw a pattern of routing things to "Platform Clock" and added to that as well. Looking at patch 5/7 of a Mediatek-related series [3], I can only guess that routes could be further improved, but don't know exactly how for each device. And one more concern is I don't know if the names conflict with any controls from codecs, although I tried to keep to names of existing widgets. As far as I can tell, the root cause for most of why these are missing originates to things being developed for ChromeOS, whose userspace reads the jack input device and doesn't care for these kcontrols. There's non-ChromeOS cases as well, maybe things got copy-pasted around and people didn't need or couldn't figure out how to get more specific than a single jack kcontrol. The secondary intent in this patchset is to fix this *everywhere*, so future copy-pastes result in the right behaviour. For more context also see: [1] ASoC: soc-card: Create jack kcontrol without pins https://lore.kernel.org/alsa-devel/20220408041114.6024-1-akihiko.odaki@gmail.com/ [2] ASoC: Intel: Chromebooks: remap jack pins https://lore.kernel.org/alsa-devel/20220616214055.134943-1-pierre-louis.bossart@linux.intel.com/ [3] ASoC: mediatek: Allow separate handling of headphone and headset mic jack https://lore.kernel.org/alsa-devel/20220922235951.252532-1-nfraprado@collabora.com/ [4] ASoC: rk3399_gru_sound: Add DAPM pins, kcontrols for jack detection https://lore.kernel.org/alsa-devel/20200721182709.6895-1-alpernebiyasak@gmail.com/ This applies onto next-20230802. Unfortunately most of it is untested except for a few Chromebooks I have (Kevin, Lick, Hana, Cozmo), because I'm intentionally generalizing to everything.
-
Mark Brown authored
Merge series from wangweidong.a@awinic.com: The awinic AW88261 is an I2S/TDM input, high efficiency digital Smart K audio amplifier.
-
Mark Brown authored
Merge series from Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>: This patchset improves the pm_runtime behavior in rare corner cases identified by the Intel CI in the last 6 months. a) in stress-tests, it's not uncommon to see the following type of warnings when the codec reports as ATTACHED "rt711 sdw:0:025d:0711:00: runtime PM trying to activate child device sdw:0:025d:0711:00 but parent (sdw-master-0) is not active" This warning was not correlated with any functional issue, but it exposed a design issue on when to enable pm_runtime. The recommended practice in the pm_runtime documentation is to keep the devices in 'suspended' mode and mark them as 'active' when they are really functional. b) enabling pm_runtime when the codec reports as ATTACHED also creates a problematic case when the ASoC pm_runtime_get_sync() will silently fail due to the -EACCESS error handling. This can happen when playback starts before the codec is enumerated. This patchset modifies the initial stages so that codecs are pm_runtime enabled in the .probe() callback, but become pm_runtime 'active' only when they report present. This is better aligned with the design of the pm_runtime helpers and improved CI results significantly. This patchset modifies all existing SoundWire codecs (except Qualcomm ones), but the pattern of changes is exactly the same in all patches.
-
- Aug 07, 2023
-
-
Weidong Wang authored
Add i2c and amplifier registration for aw88261 and their associated operation functions. Signed-off-by:
Weidong Wang <wangweidong.a@awinic.com> Link: https://lore.kernel.org/r/20230804114749.215460-4-wangweidong.a@awinic.com Signed-off-by:
-
Weidong Wang authored
Add aw88261 compatible code to the aw88395_lib.c file so that it can parse aw88261's bin file. Signed-off-by:
-
Weidong Wang authored
Add the awinic,aw88261 property to the awinic,aw88395.yaml file. Signed-off-by:
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20230804114749.215460-2-wangweidong.a@awinic.com Signed-off-by:
-
Mark Brown authored
The maple tree register cache is based on a much more modern data structure than the rbtree cache and makes optimisation choices which are probably more appropriate for modern systems than those made by the rbtree cache. In v6.5 it has also acquired the ability to generate multi-register writes in sync operations, bringing performance up to parity with the rbtree cache there. Update the jz4740 driver to use the more modern data structure. Signed-off-by:
-
Krzysztof Kozlowski authored
Reformat the code to match Linuxn coding style: re-indent continued lines and stop too-early line wrapping, drop unneeded {} brackets. No functional impact. Signed-off-by: -
Krzysztof Kozlowski authored
MAX98926 and MAX98927 are quite similar and use the same bindings, although drivers were not implementing them in the same way: MAX98926 has boolean "interleave-mode" but MAX98927 has uint32 "interleave_mode". Unify them under maxim,interleave-mode, already used in other Maxim device. Signed-off-by:
-
Krzysztof Kozlowski authored
Convert the Maxim Integrated MAX98925/MAX98926/MAX98927 speaker amplifier bindings to DT schema format. Changes during conversion: 1. Add "sound-dai-cells", already used by DTS. 2. Use "maxim,interleave-mode" instead previous "interleave-mode" and undocumented but used interleave_mode. Signed-off-by:
-
Alper Nebi Yasak authored
This driver does not map jack pins to kcontrols that PulseAudio/PipeWire need to handle jack detection events. The WM1811 codec used here seems to support detecting Headphone and Headset Mic connections. Expose each to userspace as a kcontrol and add the necessary widgets. Signed-off-by:
Alper Nebi Yasak <alpernebiyasak@gmail.com> Link: https://lore.kernel.org/r/20230802175737.263412-28-alpernebiyasak@gmail.com Signed-off-by:
-
Alper Nebi Yasak authored
This driver has correctly mapped jack kcontrols for Headphone and Headset Mic. However, it is also mapping Line Out jack detection events to the Headphone kcontrol. The WM5100 codec used here can distinguish Line Out connections from Headphone connections. Decouple the two, expose Line Out to userspace as an independent kcontrol and add the necessary widget. Signed-off-by:
-
Alper Nebi Yasak authored
This driver does not properly map jack pins to kcontrols that PulseAudio and PipeWire need to handle jack detection events. The WM8958 codec used here can detect Headphone and Headset Mic connections. Expose each to userspace as a kcontrol and add the necessary widgets. Signed-off-by:
-
Alper Nebi Yasak authored
This driver does not properly map jack pins to kcontrols that PulseAudio and PipeWire need to handle jack detection events. The RT5645 codec used here supports detecting Headphone and Headset Mic connections. Expose both to userspace as kcontrols. Signed-off-by:
-
Alper Nebi Yasak authored
Commit d0508b4f ("ASoC: rk3399_gru_sound: Add DAPM pins, kcontrols for jack detection") maps kcontrols for Headphones and Headset Mic jacks for this driver so that PulseAudio and PipeWire can handle insertion events for these peripherals. The DA7219 codec used here can also distinguish between Headphone and Line Out connections that go into the same physical port. Expose the latter to userspace as a kcontrol as well and add the necessary widget. Signed-off-by:
-
Alper Nebi Yasak authored
This driver does not properly map jack pins to kcontrols that PulseAudio and PipeWire need to handle jack detection events. The RT5663 codec used here can detect Headphone and Headset Mic connections. Expose each to userspace as a kcontrol. Signed-off-by:
-
Alper Nebi Yasak authored
This driver does not properly map jack pins to kcontrols that PulseAudio and PipeWire need to handle jack detection events. The RT5682 and RT5682s codecs used here can detect Headphone and Headset Mic connections. Expose each to userspace as a kcontrol. Signed-off-by:
-
Alper Nebi Yasak authored
This driver does not properly map jack pins to kcontrols that PulseAudio and PipeWire need to handle jack detection events. The RT5682 and RT5682s codecs used here can detect Headphone and Headset Mic connections. Expose each to userspace as a kcontrol. Signed-off-by:
-
Alper Nebi Yasak authored
This driver does not properly map jack pins to kcontrols that PulseAudio and PipeWire need to handle jack detection events. It seems to support detecting Headphone and Headset Mic connections. Expose each to userspace as a kcontrol and add the necessary widgets. Signed-off-by:
-
Alper Nebi Yasak authored
Commit 8e986748 ("ASoC: mediatek: mt8186-da7219: Expose individual headset jack pins") maps kcontrols for Headphone and Headset Mic jacks for this driver so that PulseAudio and PipeWire can handle jack detection events for these peripherals. The DA7219 codec used here can also distinguish between Headphone and Line Out connections that go into the same physical port. Expose the latter to userspace as a kcontrol as well and add the necessary widgets. Signed-off-by:
-
Alper Nebi Yasak authored
This driver does not properly map jack pins to kcontrols that PulseAudio and PipeWire need to handle jack detection events. The TS3A227 component used here can detect Headphones and Headset Mic connections. Expose each to userspace as kcontrols and add the necessary widgets. Signed-off-by:
-
Alper Nebi Yasak authored
This driver does not properly map jack pins to kcontrols that PulseAudio and PipeWire need to handle jack detection events. The DA7219 codec used here can detect Headphones, Headset Mic and Line Out connections. Expose each to userspace as kcontrols and add the necessary widgets. Signed-off-by:
-
Alper Nebi Yasak authored
This driver does not properly map jack pins to kcontrols that PulseAudio and PipeWire need to handle jack detection events. The RT5645 codec used here can detect Headphone and Headset Mic connections. Expose both to userspace as kcontrols. Signed-off-by:
-
Alper Nebi Yasak authored
This driver does not properly map jack pins to kcontrols that PulseAudio and PipeWire need to handle jack detection events. The RT5645 codec used here can detect Headphone and Headset Mic connections. Expose both to userspace as kcontrols. Signed-off-by:
-
Alper Nebi Yasak authored
This driver does not properly map jack pins to kcontrols that PulseAudio and PipeWire need to handle jack detection events. The RT5645 codec used here can detect Headphone and Headset Mic connections. Expose each to userspace as kcontrols. Signed-off-by:
-
Alper Nebi Yasak authored
This driver has correctly mapped jack kcontrols for Headphone and Headset Mic. However, it is configuring the jack to only care about Headphone events. The MAX98090 codec used here can detect both connections, so configure the jack as such. Signed-off-by:
-
Alper Nebi Yasak authored
This driver does not properly map jack pins to kcontrols that PulseAudio and PipeWire need to handle jack detection events. It seems to have a single detection GPIO pin used to report everything as a Headset. But it has widgets for Headphone and Mic Jack, so expose both to userspace as kcontrols. Signed-off-by:
-
Alper Nebi Yasak authored
Commit 2913bb1f ("ASoC: Intel: sof_da7219_max98373: remap jack pins") maps kcontrols for Headphone and Headset Mic jacks for this driver so that PulseAudio and PipeWire can handle jack detection events for these peripherals. The DA7219 codec used here can also distinguish between Headphone and Line Out connections that go into the same physical port. Expose the latter to userspace as a kcontrol as well and add the necessary widgets. Signed-off-by:
-
Alper Nebi Yasak authored
Commit b9f53b9f ("ASoC: Intel: kbl_da7219_max98927: remap jack pins") maps kcontrols for Headphone and Headset Mic jacks for this driver so that PulseAudio and PipeWire can handle jack detection events for these peripherals. The DA7219 codec used here can also distinguish between Headphone and Line Out connections that go into the same physical port. Expose the latter to userspace as a kcontrol as well and add the necessary widgets. Signed-off-by:
-
Alper Nebi Yasak authored
Commit c2065d43 ("ASoC: Intel: kbl_da7219_max98357a: remap jack pins") maps kcontrols for Headphone and Headset Mic jacks for this driver so that PulseAudio and PipeWire can handle jack detection events for these peripherals. The DA7219 codec used here can also distinguish between Headphone and Line Out connections that go into the same physical port. Expose the latter to userspace as a kcontrol as well and add the necessary widgets. Signed-off-by:
-
Alper Nebi Yasak authored
Commit ecd77d49 ("ASoC: Intel: bytcr_wm5102: Add jack detect support") maps kcontrols for Headphone and Headset Mic jacks for this driver so that PulseAudio and PipeWire can handle jack detection events for these peripherals. The WM5102 codec used here can also distinguish between Headphone and Line Out connections that go into the same physical port. Expose the latter to userspace as a kcontrol as well and add the necessary widgets. Signed-off-by:
-
Alper Nebi Yasak authored
Commit bbdd4ea2 ("ASoC: Intel: bxt_da7219_max98357a: remap jack pins") maps kcontrols for Headphone and Headset Mic jacks for this driver so that PulseAudio and PipeWire can handle detection events for these peripherals. The DA7219 codec used here can also distinguish between Headphone and Line Out connections that go into the same physical port. Expose the latter to userspace as a kcontrol as well and add the necessary widgets. Signed-off-by:
-
Alper Nebi Yasak authored
This driver does not properly map jack pins to kcontrols that PulseAudio and PipeWire need to handle jack detection events. The DA7219 codec used here can detect Headphones, Headset Mic and Line Out connections. Expose each to userspace as kcontrols and add the necessary widgets. Signed-off-by:
-
Alper Nebi Yasak authored
This driver does not properly map jack pins to kcontrols that PulseAudio and PipeWire need to handle jack detection events. The RT5682, RT1015 and RT1015p codecs used here can detect Headphone and Headset Mic connections. Expose the former two to userspace as kcontrols. Signed-off-by:
-
Alper Nebi Yasak authored
This driver does not properly map jack pins to kcontrols that PulseAudio and PipeWire need to handle jack detection events. The RT5682, RT5682s, NAU8825 and NAU8821 codecs used here can detect Headphone and Headset Mic connections. Expose both to userspace as kcontrols and add the necessary widgets. Split the jack and pin structs per-codec to accommodate for per-codec differences. Signed-off-by:
-
Alper Nebi Yasak authored
This driver does not properly map jack pins to kcontrols that PulseAudio and PipeWire need to handle jack detection events. The RT5645 codec used here can detect Headphone and Headset Mic connections. Expose both to userspace as kcontrols. Signed-off-by:
-
Alper Nebi Yasak authored
This driver does not properly map jack pins to kcontrols that PulseAudio and PipeWire need to handle jack detection events. The DA7219 codec used here can detect Headphones, Headset Mic and Line Out connections. Expose each to userspace as kcontrols and add the necessary widgets. Signed-off-by:
-
Pierre-Louis Bossart authored
This patch suggests enabling pm_runtime during the probe, but marking the device as 'active' only after it is enumerated. That will force a dependency between the card and the codec, pm_runtime_get_sync() will have to wait for the codec device to resume and hence implicitly wait for the enumeration/initialization to be completed. In the nominal case where the codec device is already active the get_sync() would only perform a ref-count increase. The changes are directly inspired by RT711 and RT711-sdca changes. Signed-off-by:
Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Reviewed-by:
Rander Wang <rander.wang@intel.com> Reviewed-by:
Bard Liao <yung-chuan.liao@linux.intel.com> Link: https://lore.kernel.org/r/20230802153629.53576-17-pierre-louis.bossart@linux.intel.com Signed-off-by:
-
