- Feb 10, 2024
-
-
Breno Leitao authored
W=1 builds now warn if module is built without a MODULE_DESCRIPTION(). Add descriptions to the IPv6 modules. Signed-off-by:
Breno Leitao <leitao@debian.org> Reviewed-by:
Simon Horman <horms@kernel.org> Link: https://lore.kernel.org/r/20240208164244.3818498-6-leitao@debian.org Signed-off-by:
Jakub Kicinski <kuba@kernel.org>
-
Breno Leitao authored
W=1 builds now warn if module is built without a MODULE_DESCRIPTION(). Add descriptions to IPv6 over Low power Wireless Personal Area Network. Signed-off-by:
Alexander Aring <aahringo@redhat.com> Reviewed-by:
-
Breno Leitao authored
W=1 builds now warn if module is built without a MODULE_DESCRIPTION(). Add descriptions to the PF_KEY socket helpers. Signed-off-by:
-
Breno Leitao authored
W=1 builds now warn if module is built without a MODULE_DESCRIPTION(). Add descriptions to the Multi-Protocol Over ATM (MPOA) driver. Signed-off-by:
-
Breno Leitao authored
W=1 builds now warn if module is built without a MODULE_DESCRIPTION(). Add descriptions to the XFRM interface drivers. Signed-off-by:
-
Horatiu Vultur authored
There is a crash when adding one of the lan966x interfaces under a lag interface. The issue can be reproduced like this: ip link add name bond0 type bond miimon 100 mode balance-xor ip link set dev eth0 master bond0 The reason is because when adding a interface under the lag it would go through all the ports and try to figure out which other ports are under that lag interface. And the issue is that lan966x can have ports that are NULL pointer as they are not probed. So then iterating over these ports it would just crash as they are NULL pointers. The fix consists in actually checking for NULL pointers before accessing something from the ports. Like we do in other places. Fixes: cabc9d49 ("net: lan966x: Add lag support for lan966x") Signed-off-by:
Horatiu Vultur <horatiu.vultur@microchip.com> Reviewed-by:
Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Reviewed-by:
-
Victor Nogueira authored
While testing tdc with parallel tests for mirred to block we caught an intermittent bug. The blockid was being zeroed out when a net device was deleted and, thus, giving us an incorrect blockid value whenever we tried to dump the mirred action. Since we don't increment the block refcount in the control path (and only use the ID), we don't need to zero the blockid field whenever a net device is going down. Fixes: 42f39036 ("net/sched: act_mirred: Allow mirred to block") Signed-off-by:
Victor Nogueira <victor@mojatatu.com> Reviewed-by:
Eric Dumazet <edumazet@google.com> Acked-by:
Jamal Hadi Salim <jhs@mojatatu.com> Link: https://lore.kernel.org/r/20240207222902.1469398-1-victor@mojatatu.com Signed-off-by:
-
Jakub Kicinski authored
Aaron Conole says: ==================== net: openvswitch: limit the recursions from action sets Open vSwitch module accepts actions as a list from the netlink socket and then creates a copy which it uses in the action set processing. During processing of the action list on a packet, the module keeps a count of the execution depth and exits processing if the action depth goes too high. However, during netlink processing the recursion depth isn't checked anywhere, and the copy trusts that kernel has large enough stack to accommodate it. The OVS sample action was the original action which could perform this kinds of recursion, and it originally checked that it didn't exceed the sample depth limit. However, when sample became optimized to provide the clone() semantics, the recursion limit was dropped. This series adds a depth limit during the __ovs_nla_copy_actions() call that will ensure we don't exceed the max that the OVS userspace could generate for a clone(). Additionally, this series provides a selftest in 2/2 that can be used to determine if the OVS module is allowing unbounded access. It can be safely omitted where the ovs selftest framework isn't available. ==================== Link: https://lore.kernel.org/r/20240207132416.1488485-1-aconole@redhat.com Signed-off-by:
-
Aaron Conole authored
Add a test case into the netlink checks that will show the number of nested action recursions won't exceed 16. Going to 17 on a small clone call isn't enough to exhaust the stack on (most) systems, so it should be safe to run even on systems that don't have the fix applied. Signed-off-by:
Aaron Conole <aconole@redhat.com> Reviewed-by:
-
Aaron Conole authored
The ovs module allows for some actions to recursively contain an action list for complex scenarios, such as sampling, checking lengths, etc. When these actions are copied into the internal flow table, they are evaluated to validate that such actions make sense, and these calls happen recursively. The ovs-vswitchd userspace won't emit more than 16 recursion levels deep. However, the module has no such limit and will happily accept limits larger than 16 levels nested. Prevent this by tracking the number of recursions happening and manually limiting it to 16 levels nested. The initial implementation of the sample action would track this depth and prevent more than 3 levels of recursion, but this was removed to support the clone use case, rather than limited at the current userspace limit. Fixes: 798c1661 ("openvswitch: Optimize sample action for the clone use cases") Signed-off-by:
-
Jakub Kicinski authored
Ido Schimmel says: ==================== selftests: forwarding: Various fixes Fix various problems in the forwarding selftests so that they will pass in the netdev CI instead of being ignored. See commit messages for details. ==================== Link: https://lore.kernel.org/r/20240208155529.1199729-1-idosch@nvidia.com Signed-off-by:
-
Ido Schimmel authored
The redirection test case fails in the netdev CI on debug kernels because an FDB entry is learned despite the presence of a tc filter that redirects incoming traffic [1]. I am unable to reproduce the failure locally, but I can see how it can happen given that learning is first enabled and only then the ingress tc filter is configured. On debug kernels the time window between these two operations is longer compared to regular kernels, allowing random packets to be transmitted and trigger learning. Fix by reversing the order and configure the ingress tc filter before enabling learning. [1] [...] # TEST: Locked port MAB redirect [FAIL] # Locked entry created for redirected traffic Fixes: 38c43a1c ("selftests: forwarding: Add test case for traffic redirection from a locked port") Signed-off-by:
Ido Schimmel <idosch@nvidia.com> Reviewed-by:
Hangbin Liu <liuhangbin@gmail.com> Acked-by:
Nikolay Aleksandrov <razor@blackwall.org> Link: https://lore.kernel.org/r/20240208155529.1199729-5-idosch@nvidia.com Signed-off-by:
-
Ido Schimmel authored
Suppress the following grep warnings: [...] INFO: # Port group entries configuration tests - (*, G) TEST: Common port group entries configuration tests (IPv4 (*, G)) [ OK ] TEST: Common port group entries configuration tests (IPv6 (*, G)) [ OK ] grep: warning: stray \ before / grep: warning: stray \ before / grep: warning: stray \ before / TEST: IPv4 (*, G) port group entries configuration tests [ OK ] grep: warning: stray \ before / grep: warning: stray \ before / grep: warning: stray \ before / TEST: IPv6 (*, G) port group entries configuration tests [ OK ] [...] They do not fail the test, but do clutter the output. Fixes: b6d00da0 ("selftests: forwarding: Add bridge MDB test") Signed-off-by:
-
Ido Schimmel authored
After enabling a multicast querier on the bridge (like the test is doing), the bridge will wait for the Max Response Delay before starting to forward according to its MDB in order to let Membership Reports enough time to be received and processed. Currently, the test is waiting for exactly the default Max Response Delay (10 seconds) which is racy and leads to failures [1]. Fix by reducing the Max Response Delay to 1 second. [1] [...] # TEST: IPv4 host entries forwarding tests [FAIL] # Packet locally received after flood Fixes: b6d00da0 ("selftests: forwarding: Add bridge MDB test") Signed-off-by:
-
Ido Schimmel authored
After enabling a multicast querier on the bridge (like the test is doing), the bridge will wait for the Max Response Delay before starting to forward according to its MDB in order to let Membership Reports enough time to be received and processed. Currently, the test is waiting for exactly the default Max Response Delay (10 seconds) which is racy and leads to failures [1]. Fix by reducing the Max Response Delay to 1 second. [1] [...] # TEST: L2 miss - Multicast (IPv4) [FAIL] # Unregistered multicast filter was hit after adding MDB entry Fixes: 8c33266a ("selftests: forwarding: Add layer 2 miss test cases") Signed-off-by:
-
Ido Schimmel authored
The test toggles the carrier of a bridge port in order to test the bridge backup port feature. Due to the linkwatch delayed work the carrier change is not always reflected fast enough to the bridge driver and packets are not forwarded as the test expects, resulting in failures [1]. Fix by busy waiting on the bridge port state until it changes to the desired state following the carrier change. [1] # Backup port # ----------- [...] # TEST: swp1 carrier off [ OK ] # TEST: No forwarding out of swp1 [FAIL] [ 641.995910] br0: port 1(swp1) entered disabled state # TEST: No forwarding out of vx0 [ OK ] Fixes: b4084530 ("selftests: net: Add bridge backup port and backup nexthop ID test") Signed-off-by:
Petr Machata <petrm@nvidia.com> Acked-by:
Paolo Abeni <pabeni@redhat.com> Acked-by:
-
- Feb 09, 2024
-
-
Paolo Abeni authored
The reuseport_addr_any.sh is currently skipping DCCP tests and pmtu.sh is skipping all the FOU/GUE related cases: add the missing options. Signed-off-by:
-
Parav Pandit authored
Command example string is not read as command. Fix command annotation. Fixes: a8ce7b26 ("devlink: Expose port function commands to control migratable") Signed-off-by:
Parav Pandit <parav@nvidia.com> Reviewed-by:
Jiri Pirko <jiri@nvidia.com> Reviewed-by:
-
Magnus Karlsson authored
Do not report the XDP capability NETDEV_XDP_ACT_XSK_ZEROCOPY as the bonding driver does not support XDP and AF_XDP in zero-copy mode even if the real NIC drivers do. Note that the driver used to report everything as supported before a device was bonded. Instead of just masking out the zero-copy support from this, have the driver report that no XDP feature is supported until a real device is bonded. This seems to be more truthful as it is the real drivers that decide what XDP features are supported. Fixes: cb9e6e58 ("bonding: add xdp_features support") Reported-by:
Prashant Batra <prbatra.mail@gmail.com> Link: https://lore.kernel.org/all/CAJ8uoz2ieZCopgqTvQ9ZY6xQgTbujmC6XkMTamhp68O-h_-rLg@mail.gmail.com/T/ Signed-off-by:
Magnus Karlsson <magnus.karlsson@intel.com> Reviewed-by:
Toke Høiland-Jørgensen <toke@redhat.com> Link: https://lore.kernel.org/r/20240207084737.20890-1-magnus.karlsson@gmail.com Signed-off-by:
-
Chuck Lever authored
Recently, handshake_req_destroy_test1 started failing: Expected handshake_req_destroy_test == req, but handshake_req_destroy_test == 0000000000000000 req == 0000000060f99b40 not ok 11 req_destroy works This is because "sock_release(sock)" was replaced with "fput(filp)" to address a memory leak. Note that sock_release() is synchronous but fput() usually delays the final close and clean-up. The delay is not consequential in the other cases that were changed but handshake_req_destroy_test1 is testing that handshake_req_cancel() followed by closing the file actually does call the ->hp_destroy method. Thus the PTR_EQ test at the end has to be sure that the final close is complete before it checks the pointer. We cannot use a completion here because if ->hp_destroy is never called (ie, there is an API bug) then the test will hang. Reported by: Guenter Roeck <linux@roeck-us.net> Closes: https://lore.kernel.org/netdev/ZcKDd1to4MPANCrn@tissot.1015granger.net/T/#mac5c6299f86799f1c71776f3a07f9c566c7c3c40 Fixes: 4a0f07d7 ("net/handshake: Fix memory leak in __sock_create() and sock_alloc_file()") Signed-off-by:Chuck Lever <chuck.lever@oracle.com> Reviewed-by:
Hannes Reinecke <hare@suse.de> Link: https://lore.kernel.org/r/170724699027.91401.7839730697326806733.stgit@oracle-102.nfsv4bat.org Signed-off-by:
-
Jiri Pirko authored
I managed to hit following use after free warning recently: [ 2169.711665] ================================================================== [ 2169.714009] BUG: KASAN: slab-use-after-free in __run_timers.part.0+0x179/0x4c0 [ 2169.716293] Write of size 8 at addr ffff88812b326a70 by task swapper/4/0 [ 2169.719022] CPU: 4 PID: 0 Comm: swapper/4 Not tainted 6.8.0-rc2jiri+ #2 [ 2169.720974] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 [ 2169.722457] Call Trace: [ 2169.722756] <IRQ> [ 2169.723024] dump_stack_lvl+0x58/0xb0 [ 2169.723417] print_report+0xc5/0x630 [ 2169.723807] ? __virt_addr_valid+0x126/0x2b0 [ 2169.724268] kasan_report+0xbe/0xf0 [ 2169.724667] ? __run_timers.part.0+0x179/0x4c0 [ 2169.725116] ? __run_timers.part.0+0x179/0x4c0 [ 2169.725570] __run_timers.part.0+0x179/0x4c0 [ 2169.726003] ? call_timer_fn+0x320/0x320 [ 2169.726404] ? lock_downgrade+0x3a0/0x3a0 [ 2169.726820] ? kvm_clock_get_cycles+0x14/0x20 [ 2169.727257] ? ktime_get+0x92/0x150 [ 2169.727630] ? lapic_next_deadline+0x35/0x60 [ 2169.728069] run_timer_softirq+0x40/0x80 [ 2169.728475] __do_softirq+0x1a1/0x509 [ 2169.728866] irq_exit_rcu+0x95/0xc0 [ 2169.729241] sysvec_apic_timer_interrupt+0x6b/0x80 [ 2169.729718] </IRQ> [ 2169.729993] <TASK> [ 2169.730259] asm_sysvec_apic_timer_interrupt+0x16/0x20 [ 2169.730755] RIP: 0010:default_idle+0x13/0x20 [ 2169.731190] Code: c0 08 00 00 00 4d 29 c8 4c 01 c7 4c 29 c2 e9 72 ff ff ff cc cc cc cc 8b 05 9a 7f 1f 02 85 c0 7e 07 0f 00 2d cf 69 43 00 fb f4 <fa> c3 66 66 2e 0f 1f 84 00 00 00 00 00 65 48 8b 04 25 c0 93 04 00 [ 2169.732759] RSP: 0018:ffff888100dbfe10 EFLAGS: 00000242 [ 2169.733264] RAX: 0000000000000001 RBX: ffff888100d9c200 RCX: ffffffff8241bd62 [ 2169.733925] RDX: ffffed109a848b15 RSI: 0000000000000004 RDI: ffffffff8127ac55 [ 2169.734566] RBP: 0000000000000004 R08: 0000000000000000 R09: ffffed109a848b14 [ 2169.735200] R10: ffff8884d42458a3 R11: 000000000000ba7e R12: ffffffff83d7d3a0 [ 2169.735835] R13: 1ffff110201b7fc6 R14: 0000000000000000 R15: ffff888100d9c200 [ 2169.736478] ? ct_kernel_exit.constprop.0+0xa2/0xc0 [ 2169.736954] ? do_idle+0x285/0x290 [ 2169.737323] default_idle_call+0x63/0x90 [ 2169.737730] do_idle+0x285/0x290 [ 2169.738089] ? arch_cpu_idle_exit+0x30/0x30 [ 2169.738511] ? mark_held_locks+0x1a/0x80 [ 2169.738917] ? lockdep_hardirqs_on_prepare+0x12e/0x200 [ 2169.739417] cpu_startup_entry+0x30/0x40 [ 2169.739825] start_secondary+0x19a/0x1c0 [ 2169.740229] ? set_cpu_sibling_map+0xbd0/0xbd0 [ 2169.740673] secondary_startup_64_no_verify+0x15d/0x16b [ 2169.741179] </TASK> [ 2169.741686] Allocated by task 1098: [ 2169.742058] kasan_save_stack+0x1c/0x40 [ 2169.742456] kasan_save_track+0x10/0x30 [ 2169.742852] __kasan_kmalloc+0x83/0x90 [ 2169.743246] mlx5_dpll_probe+0xf5/0x3c0 [mlx5_dpll] [ 2169.743730] auxiliary_bus_probe+0x62/0xb0 [ 2169.744148] really_probe+0x127/0x590 [ 2169.744534] __driver_probe_device+0xd2/0x200 [ 2169.744973] device_driver_attach+0x6b/0xf0 [ 2169.745402] bind_store+0x90/0xe0 [ 2169.745761] kernfs_fop_write_iter+0x1df/0x2a0 [ 2169.746210] vfs_write+0x41f/0x790 [ 2169.746579] ksys_write+0xc7/0x160 [ 2169.746947] do_syscall_64+0x6f/0x140 [ 2169.747333] entry_SYSCALL_64_after_hwframe+0x46/0x4e [ 2169.748049] Freed by task 1220: [ 2169.748393] kasan_save_stack+0x1c/0x40 [ 2169.748789] kasan_save_track+0x10/0x30 [ 2169.749188] kasan_save_free_info+0x3b/0x50 [ 2169.749621] poison_slab_object+0x106/0x180 [ 2169.750044] __kasan_slab_free+0x14/0x50 [ 2169.750451] kfree+0x118/0x330 [ 2169.750792] mlx5_dpll_remove+0xf5/0x110 [mlx5_dpll] [ 2169.751271] auxiliary_bus_remove+0x2e/0x40 [ 2169.751694] device_release_driver_internal+0x24b/0x2e0 [ 2169.752191] unbind_store+0xa6/0xb0 [ 2169.752563] kernfs_fop_write_iter+0x1df/0x2a0 [ 2169.753004] vfs_write+0x41f/0x790 [ 2169.753381] ksys_write+0xc7/0x160 [ 2169.753750] do_syscall_64+0x6f/0x140 [ 2169.754132] entry_SYSCALL_64_after_hwframe+0x46/0x4e [ 2169.754847] Last potentially related work creation: [ 2169.755315] kasan_save_stack+0x1c/0x40 [ 2169.755709] __kasan_record_aux_stack+0x9b/0xf0 [ 2169.756165] __queue_work+0x382/0x8f0 [ 2169.756552] call_timer_fn+0x126/0x320 [ 2169.756941] __run_timers.part.0+0x2ea/0x4c0 [ 2169.757376] run_timer_softirq+0x40/0x80 [ 2169.757782] __do_softirq+0x1a1/0x509 [ 2169.758387] Second to last potentially related work creation: [ 2169.758924] kasan_save_stack+0x1c/0x40 [ 2169.759322] __kasan_record_aux_stack+0x9b/0xf0 [ 2169.759773] __queue_work+0x382/0x8f0 [ 2169.760156] call_timer_fn+0x126/0x320 [ 2169.760550] __run_timers.part.0+0x2ea/0x4c0 [ 2169.760978] run_timer_softirq+0x40/0x80 [ 2169.761381] __do_softirq+0x1a1/0x509 [ 2169.761998] The buggy address belongs to the object at ffff88812b326a00 which belongs to the cache kmalloc-256 of size 256 [ 2169.763061] The buggy address is located 112 bytes inside of freed 256-byte region [ffff88812b326a00, ffff88812b326b00) [ 2169.764346] The buggy address belongs to the physical page: [ 2169.764866] page:000000000f2b1e89 refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x12b324 [ 2169.765731] head:000000000f2b1e89 order:2 entire_mapcount:0 nr_pages_mapped:0 pincount:0 [ 2169.766484] anon flags: 0x200000000000840(slab|head|node=0|zone=2) [ 2169.767048] page_type: 0xffffffff() [ 2169.767422] raw: 0200000000000840 ffff888100042b40 0000000000000000 dead000000000001 [ 2169.768183] raw: 0000000000000000 0000000000200020 00000001ffffffff 0000000000000000 [ 2169.768899] page dumped because: kasan: bad access detected [ 2169.769649] Memory state around the buggy address: [ 2169.770116] ffff88812b326900: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 2169.770805] ffff88812b326980: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 2169.771485] >ffff88812b326a00: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ 2169.772173] ^ [ 2169.772787] ffff88812b326a80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ 2169.773477] ffff88812b326b00: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 2169.774160] ================================================================== [ 2169.774845] ================================================================== I didn't manage to reproduce it. Though the issue seems to be obvious. There is a chance that the mlx5_dpll_remove() calls cancel_delayed_work() when the work runs and manages to re-arm itself. In that case, after delay timer triggers next attempt to queue it, it works with freed memory. Fix this by using cancel_delayed_work_sync() instead which makes sure that work is done when it returns. Fixes: 496fd0a2 ("mlx5: Implement SyncE support using DPLL infrastructure") Signed-off-by: -
Jiri Pirko authored
Recently, I've been hitting following deadlock warning during dpll pin dump: [52804.637962] ====================================================== [52804.638536] WARNING: possible circular locking dependency detected [52804.639111] 6.8.0-rc2jiri+ #1 Not tainted [52804.639529] ------------------------------------------------------ [52804.640104] python3/2984 is trying to acquire lock: [52804.640581] ffff88810e642678 (nlk_cb_mutex-GENERIC){+.+.}-{3:3}, at: netlink_dump+0xb3/0x780 [52804.641417] but task is already holding lock: [52804.642010] ffffffff83bde4c8 (dpll_lock){+.+.}-{3:3}, at: dpll_lock_dumpit+0x13/0x20 [52804.642747] which lock already depends on the new lock. [52804.643551] the existing dependency chain (in reverse order) is: [52804.644259] -> #1 (dpll_lock){+.+.}-{3:3}: [52804.644836] lock_acquire+0x174/0x3e0 [52804.645271] __mutex_lock+0x119/0x1150 [52804.645723] dpll_lock_dumpit+0x13/0x20 [52804.646169] genl_start+0x266/0x320 [52804.646578] __netlink_dump_start+0x321/0x450 [52804.647056] genl_family_rcv_msg_dumpit+0x155/0x1e0 [52804.647575] genl_rcv_msg+0x1ed/0x3b0 [52804.648001] netlink_rcv_skb+0xdc/0x210 [52804.648440] genl_rcv+0x24/0x40 [52804.648831] netlink_unicast+0x2f1/0x490 [52804.649290] netlink_sendmsg+0x36d/0x660 [52804.649742] __sock_sendmsg+0x73/0xc0 [52804.650165] __sys_sendto+0x184/0x210 [52804.650597] __x64_sys_sendto+0x72/0x80 [52804.651045] do_syscall_64+0x6f/0x140 [52804.651474] entry_SYSCALL_64_after_hwframe+0x46/0x4e [52804.652001] -> #0 (nlk_cb_mutex-GENERIC){+.+.}-{3:3}: [52804.652650] check_prev_add+0x1ae/0x1280 [52804.653107] __lock_acquire+0x1ed3/0x29a0 [52804.653559] lock_acquire+0x174/0x3e0 [52804.653984] __mutex_lock+0x119/0x1150 [52804.654423] netlink_dump+0xb3/0x780 [52804.654845] __netlink_dump_start+0x389/0x450 [52804.655321] genl_family_rcv_msg_dumpit+0x155/0x1e0 [52804.655842] genl_rcv_msg+0x1ed/0x3b0 [52804.656272] netlink_rcv_skb+0xdc/0x210 [52804.656721] genl_rcv+0x24/0x40 [52804.657119] netlink_unicast+0x2f1/0x490 [52804.657570] netlink_sendmsg+0x36d/0x660 [52804.658022] __sock_sendmsg+0x73/0xc0 [52804.658450] __sys_sendto+0x184/0x210 [52804.658877] __x64_sys_sendto+0x72/0x80 [52804.659322] do_syscall_64+0x6f/0x140 [52804.659752] entry_SYSCALL_64_after_hwframe+0x46/0x4e [52804.660281] other info that might help us debug this: [52804.661077] Possible unsafe locking scenario: [52804.661671] CPU0 CPU1 [52804.662129] ---- ---- [52804.662577] lock(dpll_lock); [52804.662924] lock(nlk_cb_mutex-GENERIC); [52804.663538] lock(dpll_lock); [52804.664073] lock(nlk_cb_mutex-GENERIC); [52804.664490] The issue as follows: __netlink_dump_start() calls control->start(cb) with nlk->cb_mutex held. In control->start(cb) the dpll_lock is taken. Then nlk->cb_mutex is released and taken again in netlink_dump(), while dpll_lock still being held. That leads to ABBA deadlock when another CPU races with the same operation. Fix this by moving dpll_lock taking into dumpit() callback which ensures correct lock taking order. Fixes: 9d71b54b ("dpll: netlink: Add DPLL framework base functions") Signed-off-by:Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com> Link: https://lore.kernel.org/r/20240207115902.371649-1-jiri@resnulli.us Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netLinus Torvalds authored
Pull networking fixes from Paolo Abeni: "Including fixes from WiFi and netfilter. Current release - regressions: - nic: intel: fix old compiler regressions - netfilter: ipset: missing gc cancellations fixed Current release - new code bugs: - netfilter: ctnetlink: fix filtering for zone 0 Previous releases - regressions: - core: fix from address in memcpy_to_iter_csum() - netfilter: nfnetlink_queue: un-break NF_REPEAT - af_unix: fix memory leak for dead unix_(sk)->oob_skb in GC. - devlink: avoid potential loop in devlink_rel_nested_in_notify_work() - iwlwifi: - mvm: fix a battery life regression - fix double-free bug - mac80211: fix waiting for beacons logic - nic: nfp: flower: prevent re-adding mac index for bonded port Previous releases - always broken: - rxrpc: fix generation of serial numbers to skip zero - tipc: check the bearer type before calling tipc_udp_nl_bearer_add() - tunnels: fix out of bounds access when building IPv6 PMTU error - nic: hv_netvsc: register VF in netvsc_probe if NET_DEVICE_REGISTER missed - nic: atlantic: fix DMA mapping for PTP hwts ring Misc: - selftests: more fixes to deal with very slow hosts" * tag 'net-6.8-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (80 commits) netfilter: nft_set_pipapo: remove scratch_aligned pointer netfilter: nft_set_pipapo: add helper to release pcpu scratch area netfilter: nft_set_pipapo: store index in scratch maps netfilter: nft_set_rbtree: skip end interval element from gc netfilter: nfnetlink_queue: un-break NF_REPEAT netfilter: nf_tables: use timestamp to check for set element timeout netfilter: nft_ct: reject direction for ct id netfilter: ctnetlink: fix filtering for zone 0 s390/qeth: Fix potential loss of L3-IP@ in case of network issues netfilter: ipset: Missing gc cancellations fixed octeontx2-af: Initialize maps. net: ethernet: ti: cpsw: enable mac_managed_pm to fix mdio net: ethernet: ti: cpsw_new: enable mac_managed_pm to fix mdio netfilter: nft_set_pipapo: remove static in nft_pipapo_get() netfilter: nft_compat: restrict match/target protocol to u16 netfilter: nft_compat: reject unused compat flag netfilter: nft_compat: narrow down revision to unsigned 8-bits net: intel: fix old compiler regressions MAINTAINERS: Maintainer change for rds selftests: cmsg_ipv6: repeat the exact packet ... -
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrlLinus Torvalds authored
Pull pinctrl fix from Linus Walleij: "A single fix for the AMD driver which affects developer laptops, the pinctrl/GPIO driver won't probe on some systems" * tag 'pinctrl-v6.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: pinctrl: amd: Add IRQF_ONESHOT to the interrupt request
-
- Feb 08, 2024
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nfPaolo Abeni authored
Pablo Neira Ayuso says: ==================== Netfilter fixes for net The following patchset contains Netfilter fixes for net: 1) Narrow down target/match revision to u8 in nft_compat. 2) Bail out with unused flags in nft_compat. 3) Restrict layer 4 protocol to u16 in nft_compat. 4) Remove static in pipapo get command that slipped through when reducing set memory footprint. 5) Follow up incremental fix for the ipset performance regression, this includes the missing gc cancellation, from Jozsef Kadlecsik. 6) Allow to filter by zone 0 in ctnetlink, do not interpret zone 0 as no filtering, from Felix Huettner. 7) Reject direction for NFT_CT_ID. 8) Use timestamp to check for set element expiration while transaction is handled to prevent garbage collection from removing set elements that were just added by this transaction. Packet path and netlink dump/get path still use current time to check for expiration. 9) Restore NF_REPEAT in nfnetlink_queue, from Florian Westphal. 10) map_index needs to be percpu and per-set, not just percpu. At this time its possible for a pipapo set to fill the all-zero part with ones and take the 'might have bits set' as 'start-from-zero' area. From Florian Westphal. This includes three patches: - Change scratchpad area to a structure that provides space for a per-set-and-cpu toggle and uses it of the percpu one. - Add a new free helper to prepare for the next patch. - Remove the scratch_aligned pointer and makes AVX2 implementation use the exact same memory addresses for read/store of the matching state. netfilter pull request 24-02-08 * tag 'nf-24-02-08' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf: netfilter: nft_set_pipapo: remove scratch_aligned pointer netfilter: nft_set_pipapo: add helper to release pcpu scratch area netfilter: nft_set_pipapo: store index in scratch maps netfilter: nft_set_rbtree: skip end interval element from gc netfilter: nfnetlink_queue: un-break NF_REPEAT netfilter: nf_tables: use timestamp to check for set element timeout netfilter: nft_ct: reject direction for ct id netfilter: ctnetlink: fix filtering for zone 0 netfilter: ipset: Missing gc cancellations fixed netfilter: nft_set_pipapo: remove static in nft_pipapo_get() netfilter: nft_compat: restrict match/target protocol to u16 netfilter: nft_compat: reject unused compat flag netfilter: nft_compat: narrow down revision to unsigned 8-bits ==================== Link: https://lore.kernel.org/r/20240208112834.1433-1-pablo@netfilter.org Signed-off-by: -
Florian Westphal authored
use ->scratch for both avx2 and the generic implementation. After previous change the scratch->map member is always aligned properly for AVX2, so we can just use scratch->map in AVX2 too. The alignoff delta is stored in the scratchpad so we can reconstruct the correct address to free the area again. Fixes: 7400b063 ("nft_set_pipapo: Introduce AVX2-based lookup implementation") Reviewed-by:
Stefano Brivio <sbrivio@redhat.com> Signed-off-by:
Florian Westphal <fw@strlen.de> Signed-off-by:
Pablo Neira Ayuso <pablo@netfilter.org>
-
Florian Westphal authored
After next patch simple kfree() is not enough anymore, so add a helper for it. Reviewed-by:
-
Florian Westphal authored
Pipapo needs a scratchpad area to keep state during matching. This state can be large and thus cannot reside on stack. Each set preallocates percpu areas for this. On each match stage, one scratchpad half starts with all-zero and the other is inited to all-ones. At the end of each stage, the half that starts with all-ones is always zero. Before next field is tested, pointers to the two halves are swapped, i.e. resmap pointer turns into fill pointer and vice versa. After the last field has been processed, pipapo stashes the index toggle in a percpu variable, with assumption that next packet will start with the all-zero half and sets all bits in the other to 1. This isn't reliable. There can be multiple sets and we can't be sure that the upper and lower half of all set scratch map is always in sync (lookups can be conditional), so one set might have swapped, but other might not have been queried. Thus we need to keep the index per-set-and-cpu, just like the scratchpad. Note that this bug fix is incomplete, there is a related issue. avx2 and normal implementation might use slightly different areas of the map array space due to the avx2 alignment requirements, so m->scratch (generic/fallback implementation) and ->scratch_aligned (avx) may partially overlap. scratch and scratch_aligned are not distinct objects, the latter is just the aligned address of the former. After this change, write to scratch_align->map_index may write to scratch->map, so this issue becomes more prominent, we can set to 1 a bit in the supposedly-all-zero area of scratch->map[]. A followup patch will remove the scratch_aligned and makes generic and avx code use the same (aligned) area. Its done in a separate change to ease review. Fixes: 3c4287f6 ("nf_tables: Add set type for arbitrary concatenation of ranges") Reviewed-by:
-
Pablo Neira Ayuso authored
rbtree lazy gc on insert might collect an end interval element that has been just added in this transactions, skip end interval elements that are not yet active. Fixes: f718863a ("netfilter: nft_set_rbtree: fix overlap expiration walk") Cc: stable@vger.kernel.org Reported-by:
lonial con <kongln9170@gmail.com> Signed-off-by:
-
Florian Westphal authored
Only override userspace verdict if the ct hook returns something other than ACCEPT. Else, this replaces NF_REPEAT (run all hooks again) with NF_ACCEPT (move to next hook). Fixes: 6291b3a6 ("netfilter: conntrack: convert nf_conntrack_update to netfilter verdicts") Reported-by:
<l.6diay@passmail.com> Signed-off-by:
-
Pablo Neira Ayuso authored
Add a timestamp field at the beginning of the transaction, store it in the nftables per-netns area. Update set backend .insert, .deactivate and sync gc path to use the timestamp, this avoids that an element expires while control plane transaction is still unfinished. .lookup and .update, which are used from packet path, still use the current time to check if the element has expired. And .get path and dump also since this runs lockless under rcu read size lock. Then, there is async gc which also needs to check the current time since it runs asynchronously from a workqueue. Fixes: c3e1b005 ("netfilter: nf_tables: add set element timeout support") Signed-off-by:
-
Pablo Neira Ayuso authored
Direction attribute is ignored, reject it in case this ever needs to be supported Fixes: 3087c3f7 ("netfilter: nft_ct: Add ct id support") Signed-off-by:
-
Felix Huettner authored
previously filtering for the default zone would actually skip the zone filter and flush all zones. Fixes: eff3c558 ("netfilter: ctnetlink: support filtering by zone") Reported-by:
Ilya Maximets <i.maximets@ovn.org> Closes: https://lore.kernel.org/netdev/2032238f-31ac-4106-8f22-522e76df5a12@ovn.org/ Signed-off-by:
Felix Huettner <felix.huettner@mail.schwarz> Signed-off-by:
-
Alexandra Winter authored
Symptom: In case of a bad cable connection (e.g. dirty optics) a fast sequence of network DOWN-UP-DOWN-UP could happen. UP triggers recovery of the qeth interface. In case of a second DOWN while recovery is still ongoing, it can happen that the IP@ of a Layer3 qeth interface is lost and will not be recovered by the second UP. Problem: When registration of IP addresses with Layer 3 qeth devices fails, (e.g. because of bad address format) the respective IP address is deleted from its hash-table in the driver. If registration fails because of a ENETDOWN condition, the address should stay in the hashtable, so a subsequent recovery can restore it. 3caa4af8 ("qeth: keep ip-address after LAN_OFFLINE failure") fixes this for registration failures during normal operation, but not during recovery. Solution: Keep L3-IP address in case of ENETDOWN in qeth_l3_recover_ip(). For consistency with qeth_l3_add_ip() we also keep it in case of EADDRINUSE, i.e. for some reason the card already/still has this address registered. Fixes: 4a71df50 ("qeth: new qeth device driver") Cc: stable@vger.kernel.org Signed-off-by:
Alexandra Winter <wintera@linux.ibm.com> Link: https://lore.kernel.org/r/20240206085849.2902775-1-wintera@linux.ibm.com Signed-off-by:
-
Jozsef Kadlecsik authored
The patch fdb8e12cc2cc ("netfilter: ipset: fix performance regression in swap operation") missed to add the calls to gc cancellations at the error path of create operations and at module unload. Also, because the half of the destroy operations now executed by a function registered by call_rcu(), neither NFNL_SUBSYS_IPSET mutex or rcu read lock is held and therefore the checking of them results false warnings. Fixes: 97f7cf1c ("netfilter: ipset: fix performance regression in swap operation") Reported-by:<syzbot+52bbc0ad036f6f0d4a25@syzkaller.appspotmail.com> Reported-by:
Brad Spengler <spender@grsecurity.net> Reported-by:
Стас Ничипорович <stasn77@gmail.com> Tested-by:
Jozsef Kadlecsik <kadlec@netfilter.org> Signed-off-by:
-
Ratheesh Kannoth authored
kmalloc_array() without __GFP_ZERO flag does not initialize memory to zero. This causes issues. Use kcalloc() for maps and bitmap_zalloc() for bitmaps. Fixes: dd784287 ("octeontx2-af: Add new devlink param to configure maximum usable NIX block LFs") Signed-off-by:
Ratheesh Kannoth <rkannoth@marvell.com> Reviewed-by:
Brett Creeley <bcreeley@amd.com> Reviewed-by:
-
Paolo Abeni authored
Sinthu Raja says: ==================== CPSW: enable mac_managed_pm to fix mdio This patch fix the resume/suspend issue on CPSW interface. Reference from the foloowing patchwork: https://lore.kernel.org/netdev/20221014144729.1159257-2-shenwei.wang@nxp.com/T/ V1: https://patchwork.kernel.org/project/netdevbpf/patch/20240122083414.6246-1-sinthu.raja@ti.com/ V2: https://patchwork.kernel.org/project/netdevbpf/patch/20240122093326.7618-1-sinthu.raja@ti.com/ ==================== Link: https://lore.kernel.org/r/20240206005928.15703-1-sinthu.raja@ti.com Signed-off-by:
-
Sinthu Raja authored
The below commit introduced a WARN when phy state is not in the states: PHY_HALTED, PHY_READY and PHY_UP. commit 744d23c7 ("net: phy: Warn about incorrect mdio_bus_phy_resume() state") When cpsw resumes, there have port in PHY_NOLINK state, so the below warning comes out. Set mac_managed_pm be true to tell mdio that the phy resume/suspend is managed by the mac, to fix the following warning: WARNING: CPU: 0 PID: 965 at drivers/net/phy/phy_device.c:326 mdio_bus_phy_resume+0x140/0x144 CPU: 0 PID: 965 Comm: sh Tainted: G O 6.1.46-g247b2535b2 #1 Hardware name: Generic AM33XX (Flattened Device Tree) unwind_backtrace from show_stack+0x18/0x1c show_stack from dump_stack_lvl+0x24/0x2c dump_stack_lvl from __warn+0x84/0x15c __warn from warn_slowpath_fmt+0x1a8/0x1c8 warn_slowpath_fmt from mdio_bus_phy_resume+0x140/0x144 mdio_bus_phy_resume from dpm_run_callback+0x3c/0x140 dpm_run_callback from device_resume+0xb8/0x2b8 device_resume from dpm_resume+0x144/0x314 dpm_resume from dpm_resume_end+0x14/0x20 dpm_resume_end from suspend_devices_and_enter+0xd0/0x924 suspend_devices_and_enter from pm_suspend+0x2e0/0x33c pm_suspend from state_store+0x74/0xd0 state_store from kernfs_fop_write_iter+0x104/0x1ec kernfs_fop_write_iter from vfs_write+0x1b8/0x358 vfs_write from ksys_write+0x78/0xf8 ksys_write from ret_fast_syscall+0x0/0x54 Exception stack(0xe094dfa8 to 0xe094dff0) dfa0: 00000004 005c3fb8 00000001 005c3fb8 00000004 00000001 dfc0: 00000004 005c3fb8 b6f6bba0 00000004 00000004 0059edb8 00000000 00000000 dfe0: 00000004 bed918f0 b6f09bd3 b6e89a66 Cc: <stable@vger.kernel.org> # v6.0+ Fixes: 744d23c7 ("net: phy: Warn about incorrect mdio_bus_phy_resume() state") Fixes: fba863b8 ("net: phy: make PHY PM ops a no-op if MAC driver manages PHY PM") Signed-off-by:
Sinthu Raja <sinthu.raja@ti.com> Signed-off-by:
-
Sinthu Raja authored
The below commit introduced a WARN when phy state is not in the states: PHY_HALTED, PHY_READY and PHY_UP. commit 744d23c7 ("net: phy: Warn about incorrect mdio_bus_phy_resume() state") When cpsw_new resumes, there have port in PHY_NOLINK state, so the below warning comes out. Set mac_managed_pm be true to tell mdio that the phy resume/suspend is managed by the mac, to fix the following warning: WARNING: CPU: 0 PID: 965 at drivers/net/phy/phy_device.c:326 mdio_bus_phy_resume+0x140/0x144 CPU: 0 PID: 965 Comm: sh Tainted: G O 6.1.46-g247b2535b2 #1 Hardware name: Generic AM33XX (Flattened Device Tree) unwind_backtrace from show_stack+0x18/0x1c show_stack from dump_stack_lvl+0x24/0x2c dump_stack_lvl from __warn+0x84/0x15c __warn from warn_slowpath_fmt+0x1a8/0x1c8 warn_slowpath_fmt from mdio_bus_phy_resume+0x140/0x144 mdio_bus_phy_resume from dpm_run_callback+0x3c/0x140 dpm_run_callback from device_resume+0xb8/0x2b8 device_resume from dpm_resume+0x144/0x314 dpm_resume from dpm_resume_end+0x14/0x20 dpm_resume_end from suspend_devices_and_enter+0xd0/0x924 suspend_devices_and_enter from pm_suspend+0x2e0/0x33c pm_suspend from state_store+0x74/0xd0 state_store from kernfs_fop_write_iter+0x104/0x1ec kernfs_fop_write_iter from vfs_write+0x1b8/0x358 vfs_write from ksys_write+0x78/0xf8 ksys_write from ret_fast_syscall+0x0/0x54 Exception stack(0xe094dfa8 to 0xe094dff0) dfa0: 00000004 005c3fb8 00000001 005c3fb8 00000004 00000001 dfc0: 00000004 005c3fb8 b6f6bba0 00000004 00000004 0059edb8 00000000 00000000 dfe0: 00000004 bed918f0 b6f09bd3 b6e89a66 Cc: <stable@vger.kernel.org> # v6.0+ Fixes: 744d23c7 ("net: phy: Warn about incorrect mdio_bus_phy_resume() state") Fixes: fba863b8 ("net: phy: make PHY PM ops a no-op if MAC driver manages PHY PM") Signed-off-by:
-
Pablo Neira Ayuso authored
This has slipped through when reducing memory footprint for set elements, remove it. Fixes: 9dad402b ("netfilter: nf_tables: expose opaque set element as struct nft_elem_priv") Reported-by:
-
