- Mar 03, 2014
-
-
Pekon Gupta authored
This patch has following updates, specific to MTD/NAND DT - update MTD NAND partition table to keep compatibility between different boards and mainline u-boot. - prefix 'NAND.' in names of NAND device MTD partitions to differentiate them from other MTD device partitions (like NOR and QSPI) Partition_Name Partition_Size /dev/mtd0 NAND.SPL 1 block-size* /dev/mtd1 NAND.SPL.backup1 1 block-size* /dev/mtd2 NAND.SPL.backup2 1 block-size* /dev/mtd3 NAND.SPL.backup3 1 block-size* /dev/mtd5 NAND.u-boot-spl-os 2 block-size* [for falcon boot] /dev/mtd4 NAND.u-boot 1 MB /dev/mtd6 NAND.u-boot-env 1 block-size* /dev/mtd7 NAND.u-boot-env.backup1 1 block-size* /dev/mtd8 NAND.kernel till 0xA00000 /dev/mtd9 NAND.file-system till end of device * am335x-evm uses NAND device with block-size=128KiB Signed-off-by:Pekon Gupta <pekon@ti.com> Signed-off-by:
Tony Lindgren <tony@atomide.com>
-
Pekon Gupta authored
This patch - refactors gpmc_hwecc_bch_capable() - add checks for new platforms like dra7xx, am43xx - add checks for OMAP3 SoC, w.r.t. new ECC schemes spawned in following commit: commit ac65caf5 ARM: OMAP2+: cleaned-up DT support of various ECC schemes Signed-off-by: -
NeilBrown authored
Add node for bma180 driver. Signed-off-by:
NeilBrown <neilb@suse.de> Signed-off-by:
-
NeilBrown authored
This requires vaux4. Reset line isn't used yet, so wifi isn't reliable. But it does work once per boot. Signed-off-by:
Marek Belisko <marek@goldelico.com> Signed-off-by:
-
NeilBrown authored
This adds basic sound support for gta04 board. Signed-off-by:
-
NeilBrown authored
Define twl4030 charger node used for charging. Signed-off-by:
-
Marek Belisko authored
Gta04 using tcs2007 touchscreen. Add support for that. Signed-off-by:
-
NeilBrown authored
Add magnetometer hmc5843 node. Signed-off-by:
-
- Mar 01, 2014
-
-
Yegor Yefremov authored
Enable second USB channel and set it into 'host' mode. Signed-off-by:
Yegor Yefremov <yegorslists@googlemail.com> Signed-off-by:
-
Stefan Roese authored
Making it possible to reference and therefor change (disable) this device node from other dts file which import this dtsi file. Signed-off-by:
Stefan Roese <sr@denx.de> Cc: Lukas Stockmann <lukas.stockmann@siemens.com> Cc: Benoit Cousson <bcousson@baylibre.com> Signed-off-by:
-
Matt Porter authored
Add missing interrupt properties to the ecap0, ecap1, and ecap2 nodes. Signed-off-by:
Matt Porter <mporter@linaro.org> Signed-off-by:
-
Nishanth Menon authored
OMAP34xx, AM3517 and OMAP36xx platforms use dpll1 clock. OMAP443x, OMAP446x, OMAP447x, OMAP5, DRA7, AM43xx platforms use dpll_mpu clock. Latency used is the generic latency defined in omap-cpufreq driver. Signed-off-by:
Nishanth Menon <nm@ti.com> Acked-by:
Acked-by: Tero Kristo <t-kristo@ti.com> Signed-off-by:
-
Christoph Fritz authored
INCOstartec LILLY-DBB056 is a carrier board (baseboard) for computer-on-module LILLY-A83X. This patch adds device-tree support for most of its features. Signed-off-by:
Christoph Fritz <chf.fritz@googlemail.com> Signed-off-by:
-
Christoph Fritz authored
INCOstartec LILLY-A83X module is a TI DM3730xx100 (OMAP3) SoC computer-on-module. This patch adds device tree support for most of its features. Signed-off-by:
-
Peter Ujfalusi authored
The clock for audio is sourced from virt_24000000_ck, so the correct frequency is 24000000. Signed-off-by:
Peter Ujfalusi <peter.ujfalusi@ti.com> CC: <stable@vger.kernel.org> # 3.13.x Signed-off-by:
-
Peter Ujfalusi authored
In omap2420.dtsi and omap2430.dtsi disable all mcbsp nodes and board dts files can explicitly enable the mcbsp they are using. Signed-off-by:
-
Peter Ujfalusi authored
In omap3.dtsi disable all mcbsp nodes and board dts files can explicitly enable the mcbsp they are using. Signed-off-by:
-
Peter Ujfalusi authored
Board dts files will need to enable the IP nodes which they are using and does not have to care about the not used ones (to disable them). Signed-off-by:
-
Peter Ujfalusi authored
All audio nodes has been set to disabled state in omap4.dtsi file. Signed-off-by:
-
Peter Ujfalusi authored
All audio nodes has been set to disabled state in omap4.dtsi file. Signed-off-by:
-
Peter Ujfalusi authored
Board dts files will need to enable the IP nodes which they are using and does not have to care about the not used ones (to disable them). Signed-off-by:
-
Peter Ujfalusi authored
Attach the pinctrl nodes to their respective device node: mcbsp1, mcbsp2, dmic, mcpdm and twl6040. Signed-off-by:
-
Peter Ujfalusi authored
Attach the pinctrl nodes to their respective device node: mcbsp1, mcpdm and twl6040. Signed-off-by:
-
Suman Anna authored
Add the hwspinlock device tree node for AM43xx family of SoCs. Signed-off-by:
Suman Anna <s-anna@ti.com> Signed-off-by:
-
Suman Anna authored
Add the hwspinlock device tree node for DRA7 SoCs. Signed-off-by:
-
Suman Anna authored
Add a new generic property "#hwlock-cells" to the hwspinlock DT nodes on OMAP4, OMAP5 and AM33xx. This common property allows different platform implementations to define the args specifier length. OMAP implementations will always use a value of 1. Signed-off-by:
-
Dmitry Lifshitz authored
sbc-t3x boards features two external USB ports on SB-T35 baseboard. The baseboardi USB hub reset signal should be de-asserted to make those ports functional. sbc-t3517 features additional (assembled on CoM) USB hub which also requires reset signal handling. Add quirks code to handle proper reset pulse signal. Signed-off-by:
Dmitry Lifshitz <lifshitz@compulab.co.il> Signed-off-by:
-
Dmitry Lifshitz authored
Add support for CM-T3517 CoM and SBC-T3517 board. reused common support for sbc-t3x boards (omap3-cm-t3x.dtsi, omap3-sb-t35.dtsi): * SB-T35 baseboard eth * MMC1, UART3 * HS USB Port 1/2 * I2C1/3 * Heartbit led Added basic support for: * MMC1 wp/cd signals * CM-T3517 Usb Hub * WL12xx WiFi chip * Davinci EMAC * AM35X OTG Signed-off-by:
-
Dmitry Lifshitz authored
Add support for CM-T3530 CoM and SBC-T3530 board. Signed-off-by:
-
Dmitry Lifshitz authored
Add USB OTG support for cm-t3x30 CoMs. Signed-off-by:
-
Dmitry Lifshitz authored
GPIO167 is used as SB-T35 baseboard USB Hub reset. Add GPIO167 pinmux. Signed-off-by:
-
Dmitry Lifshitz authored
Add HS USB Host support along with USB PHYs and power supply regulators Signed-off-by:
-
Dmitry Lifshitz authored
Add pullup for twl4030 GPIO_0 used as MMC1 card detect signal. Signed-off-by:
-
Dmitry Lifshitz authored
GPIO186 is used for the heartbeat led. Setup the pinmux for the GPIO186. Signed-off-by:
-
Dmitry Lifshitz authored
SB-T35 baseboard features SMSC9220 Ethernet chip which requires its own power supply regulators. Add baseboard specific regulators for the SB-T35 Ethernet chip. Signed-off-by:
-
Dmitry Lifshitz authored
Disable mmc3 interface, since is not used on sbc-t3x boards. Signed-off-by:
-
Dmitry Lifshitz authored
Refactor the sbc-t3x device tree as a preparation for additional (sbc-t3530, sbc-t3517, etc.) boards support. No functional changes. The device tree will have the following structure: omap3-cm-t3x.dtsi | |<-- omap3-cm-t3x30.dtsi | | | | | | ----- ------- ------------ | | | CoM | | Board | | Base board | | | ----- ------- ------------ | | omap3-sb-t35.dtsi | | | | |<-- omap3-cm-t3730.dts <-- omap3-sbc-t3730.dts -->| | | | | |<-- omap3-cm-t3530.dts <-- omap3-sbc-t3530.dts -->| | | |<-------- omap3-cm-t3517.dts <-- omap3-sbc-t3517.dts -->| Signed-off-by:
-
Dmitry Lifshitz authored
Use omap specific pinctrl defines (OMAP3_CORE1_IOPAD) to configure the padconf register offset. This simplify further support of CompuLab's boards based on omap36xx, omap34xx and am35x. Signed-off-by:
-
Sebastian Reichel authored
update aliases for the ssi clocks ssi_ssr_fck, ssi_sst_fck and ssi_ick to make them consistent for omap34xx and omap36xx. This makes it possible to reference the clocks from generic omap3 dts files. Signed-off-by:
Sebastian Reichel <sre@debian.org> Acked-by:
-
Markus Pargmann authored
This patch adds a devicetree node for the backup battery regulator. Signed-off-by:
Markus Pargmann <mpa@pengutronix.de> Signed-off-by:
-
