- Jul 28, 2020
-
-
Paul Cercueil authored
The function mipi_dbi_spi1_transfer() will transfer its payload as 9-bit data, the 9th (MSB) bit being the data/command bit. In order to do that, it unpacks the 8-bit values into 16-bit values, then sets the 9th bit if the byte corresponds to data, clears it otherwise. The 7 MSB are padding. The array of now 16-bit values is then passed to the SPI core for transfer. This function was broken since its introduction, as the length of the SPI transfer was set to the payload size before its conversion, but the payload doubled in size due to the 8-bit -> 16-bit conversion. Fixes: 02dd95fe ("drm/tinydrm: Add MIPI DBI support") Cc: <stable@vger.kernel.org> # 5.4+ Signed-off-by:
Paul Cercueil <paul@crapouillou.net> Reviewed-by:
Sam Ravnborg <sam@ravnborg.org> Reviewed-by:
Noralf Trønnes <noralf@tronnes.org> Signed-off-by:
-
- Jul 27, 2020
-
-
Sam Ravnborg authored
Recent kernels have been reported to panic using the bochs_drm framebuffer under qemu-system-sparc64 which was bisected to commit 7a0483ac ("drm/bochs: switch to generic drm fbdev emulation"). The backtrace indicates that the shadow framebuffer copy in drm_fb_helper_dirty_blit_real() is trying to access the real framebuffer using a virtual address rather than use an IO access typically implemented using a physical (ASI_PHYS) access on SPARC. The fix is to replace the memcpy with memcpy_toio() from io.h. memcpy_toio() uses writeb() where the original fbdev code used sbus_memcpy_toio(). The latter uses sbus_writeb(). The difference between writeb() and sbus_memcpy_toio() is that writeb() writes bytes in little-endian, where sbus_writeb() writes bytes in big-endian. As endian does not matter for byte writes they are the same. So we can safely use memcpy_toio() here. Note that this only fixes bochs, in general fbdev helpers still have issues with mixing up system memory and __iomem space. Fixing that will require a lot more work. v3: - Improved changelog (Daniel) - Added FIXME to fbdev_use_iomem (Daniel) v2: - Added missing __iomem cast (kernel test robot) - Made changelog readable and fix typos (Mark) - Add flag to select iomem - and set it in the bochs driver Signed-off-by:
Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Reported-by:
kernel test robot <lkp@intel.com> Tested-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Cc: Thomas Zimmermann <tzimmermann@suse.de> Cc: Gerd Hoffmann <kraxel@redhat.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: sparclinux@vger.kernel.org Link: https://patchwork.freedesktop.org/patch/msgid/20200709193016.291267-1-sam@ravnborg.org Link: https://patchwork.freedesktop.org/patch/msgid/20200725191012.GA434957@ravnborg.org
-
Linus Walleij authored
Whenever a display update was sent, apart from updating the memory base address, we called mcde_display_send_one_frame() which also sent a command to the display requesting the TE IRQ and enabling the FIFO. When continuous updates are running this is wrong: we need to only send this to start the flow to the display on the very first update. This lead to the display pipeline locking up and crashing. Check if the flow is already running and in that case do not call mcde_display_send_one_frame(). This fixes crashes on the Samsung GT-S7710 (Skomer). Signed-off-by:
Linus Walleij <linus.walleij@linaro.org> Acked-by:
Stephan Gerhold <stephan@gerhold.net> Cc: Stephan Gerhold <stephan@gerhold.net> Cc: stable@vger.kernel.org Link: https://patchwork.freedesktop.org/patch/msgid/20200718233323.3407670-1-linus.walleij@linaro.org
-
Guido Günther authored
We don't create a connector but let panel_bridge handle that so there's no point in rejecting DRM_BRIDGE_ATTACH_NO_CONNECTOR. Signed-off-by:
Guido Günther <agx@sigxcpu.org> Reviewed-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by:
-
Jitao Shi authored
Fine tune the HBP and HFP to avoid the dot noise on the left and right edges. Signed-off-by:
Jitao Shi <jitao.shi@mediatek.com> Signed-off-by:
-
Douglas Anderson authored
On boe_nv133fhm_n62 (and presumably on boe_nv133fhm_n61) a scope shows a small spike on the HPD line right when you power the panel on. The picture looks something like this: +-------------------------------------- | | | Power ---+ +--- | ++ | +----+| | HPD -----+ +---------------------------+ So right when power is applied there's a little bump in HPD and then there's small spike right before it goes low. The total time of the little bump plus the spike was measured on one panel as being 8 ms long. The total time for the HPD to go high on the same panel was 51.2 ms, though the datasheet only promises it is < 200 ms. When asked about this glitch, BOE indicated that it was expected and persisted until the TCON has been initialized. If this was a real hotpluggable DP panel then this wouldn't matter a whole lot. We'd debounce the HPD signal for a really long time and so the little blip wouldn't hurt. However, this is not a hotpluggable DP panel and the the debouncing logic isn't needed and just shows down the time needed to get the display working. This is why the code in panel_simple_prepare() doesn't do debouncing and just waits for HPD to go high once. Unfortunately if we get unlucky and happen to poll the HPD line right at the spike we can try talking to the panel before it's ready. Let's handle this situation by putting in a 15 ms prepare delay and decreasing the "hpd absent delay" by 15 ms. That means: * If you don't have HPD hooked up at all you've still got the hardcoded 200 ms delay. * If you've got HPD hooked up you will always wait at least 15 ms before checking HPD. The only case where this could be bad is if the panel is sharing a voltage rail with something else in the system and was already turned on long before the panel came up. In such a case we'll be delaying 15 ms for no reason, but it's not a huge delay and I don't see any other good solution to handle that case. Even though the delay was measured as 8 ms, 15 ms was chosen to give a bit of margin. Signed-off-by:Douglas Anderson <dianders@chromium.org> Reviewed-by:
Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by:
-
Laurentiu Palcu authored
After the drm_bridge_connector_init() helper function has been added, the ADV driver has been changed accordingly. However, the 'type' field of the bridge structure was left unset, which makes the helper function always return -EINVAL. Signed-off-by:
Laurentiu Palcu <laurentiu.palcu@nxp.com> Reviewed-by:
Vinod Koul <vkoul@kernel.org> Tested-by: Vinod Koul <vkoul@kernel.org> # tested on DragonBoard 410c Signed-off-by:
-
Biju Das authored
Fix double-free bug in the error path. Fixes: 65290075 ("drm: of: Add drm_of_lvds_get_dual_link_pixel_order") Reported-by:
Pavel Machek <pavel@denx.de> Signed-off-by:
Biju Das <biju.das.jz@bp.renesas.com> Reviewed-by:
-
- Jul 20, 2020
-
-
Qiang Yu authored
PP bcast is marked as doing async reset after job is done. When resume after suspend, each PP is reset individually, so no need to reset in PP bcast resume. But I forgot to clear the PP bcast async reset mark so call into async wait before job run and gets timeout. Closes: https://gitlab.freedesktop.org/lima/linux/-/issues/34 Fixes: 3446d7e9 ("drm/lima: add resume/suspend callback for each ip") Reviewed-by:
Erico Nunes <nunes.erico@gmail.com> Signed-off-by:
Qiang Yu <yuq825@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200719073050.776962-1-yuq825@gmail.com
-
- Jul 17, 2020
-
-
Chen-Yu Tsai authored
When the extra HPD polling in sun4i_hdmi was removed, the result of HPD was accidentally inverted. Fix this by inverting the check. Fixes: bda8eaa6 ("drm: sun4i: hdmi: Remove extra HPD polling") Signed-off-by:
Chen-Yu Tsai <wens@csie.org> Tested-by:
Mans Rullgard <mans@mansr.com> Signed-off-by:
Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20200711011030.21997-1-wens@kernel.org
-
- Jul 10, 2020
-
-
Charan Teja Kalla authored
There exists a sleep-while-atomic bug while accessing the dmabuf->name under mutex in the dmabuffs_dname(). This is caused from the SELinux permissions checks on a process where it tries to validate the inherited files from fork() by traversing them through iterate_fd() (which traverse files under spin_lock) and call match_file(security/selinux/hooks.c) where the permission checks happen. This audit information is logged using dump_common_audit_data() where it calls d_path() to get the file path name. If the file check happen on the dmabuf's fd, then it ends up in ->dmabuffs_dname() and use mutex to access dmabuf->name. The flow will be like below: flush_unauthorized_files() iterate_fd() spin_lock() --> Start of the atomic section. match_file() file_has_perm() avc_has_perm() avc_audit() slow_avc_audit() common_lsm_audit() dump_common_audit_data() audit_log_d_path() d_path() dmabuffs_dname() mutex_lock()--> Sleep while atomic. Call trace captured (on 4.19 kernels) is below: ___might_sleep+0x204/0x208 __might_sleep+0x50/0x88 __mutex_lock_common+0x5c/0x1068 __mutex_lock_common+0x5c/0x1068 mutex_lock_nested+0x40/0x50 dmabuffs_dname+0xa0/0x170 d_path+0x84/0x290 audit_log_d_path+0x74/0x130 common_lsm_audit+0x334/0x6e8 slow_avc_audit+0xb8/0xf8 avc_has_perm+0x154/0x218 file_has_perm+0x70/0x180 match_file+0x60/0x78 iterate_fd+0x128/0x168 selinux_bprm_committing_creds+0x178/0x248 security_bprm_committing_creds+0x30/0x48 install_exec_creds+0x1c/0x68 load_elf_binary+0x3a4/0x14e0 search_binary_handler+0xb0/0x1e0 So, use spinlock to access dmabuf->name to avoid sleep-while-atomic. Cc: <stable@vger.kernel.org> [5.3+] Signed-off-by:Charan Teja Kalla <charante@codeaurora.org> Reviewed-by:
Michael J. Ruhl <michael.j.ruhl@intel.com> Acked-by:
Christian König <christian.koenig@amd.com> [sumits: added comment to spinlock_t definition to avoid warning] Signed-off-by:
Sumit Semwal <sumit.semwal@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/a83e7f0d-4e54-9848-4b58-e1acdbe06735@codeaurora.org
-
- Jul 09, 2020
-
-
Guenter Roeck authored
The following backtrace is seen when running aspeed G5 kernels. WARNING: CPU: 0 PID: 1 at drivers/gpu/drm/drm_fb_helper.c:2233 drm_fbdev_generic_setup+0x138/0x198 aspeed_gfx 1e6e6000.display: Device has not been registered. CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.8.0-rc3 #1 Hardware name: Generic DT based system Backtrace: [<8010d6d0>] (dump_backtrace) from [<8010d9b8>] (show_stack+0x20/0x24) r7:00000009 r6:60000153 r5:00000000 r4:8119fa94 [<8010d998>] (show_stack) from [<80b8cb98>] (dump_stack+0xcc/0xec) [<80b8cacc>] (dump_stack) from [<80123ef0>] (__warn+0xd8/0xfc) r7:00000009 r6:80e62ed0 r5:00000000 r4:974c3ccc [<80123e18>] (__warn) from [<80123f98>] (warn_slowpath_fmt+0x84/0xc4) r9:00000009 r8:806a0140 r7:000008b9 r6:80e62ed0 r5:80e631f8 r4:974c2000 [<80123f18>] (warn_slowpath_fmt) from [<806a0140>] (drm_fbdev_generic_setup+0x138/0x198) r9:00000001 r8:9758fc10 r7:9758fc00 r6:00000000 r5:00000020 r4:9768a000 [<806a0008>] (drm_fbdev_generic_setup) from [<806d4558>] (aspeed_gfx_probe+0x204/0x32c) r7:9758fc00 r6:00000000 r5:00000000 r4:9768a000 [<806d4354>] (aspeed_gfx_probe) from [<806dfca0>] (platform_drv_probe+0x58/0xa8) Since commit 1aed9509 ("drm/fb-helper: Remove return value from drm_fbdev_generic_setup()"), drm_fbdev_generic_setup() must be called after drm_dev_register() to avoid the warning. Do that. Fixes: 1aed9509 ("drm/fb-helper: Remove return value from drm_fbdev_generic_setup()") Signed-off-by:
Guenter Roeck <linux@roeck-us.net> Acked-by:
Joel Stanley <joel@jms.id.au> Signed-off-by:
Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/20200701001002.74997-1-linux@roeck-us.net
-
- Jul 08, 2020
-
-
Zenghui Yu authored
The HiSilicon hibmc driver triggers a splat at boot time as below [ 14.137806] ------------[ cut here ]------------ [ 14.142405] hibmc-drm 0000:0a:00.0: Device has not been registered. [ 14.148661] WARNING: CPU: 0 PID: 496 at drivers/gpu/drm/drm_fb_helper.c:2233 drm_fbdev_generic_setup+0x15c/0x1b8 [ 14.158787] [...] [ 14.278307] Call trace: [ 14.280742] drm_fbdev_generic_setup+0x15c/0x1b8 [ 14.285337] hibmc_pci_probe+0x354/0x418 [ 14.289242] local_pci_probe+0x44/0x98 [ 14.292974] work_for_cpu_fn+0x20/0x30 [ 14.296708] process_one_work+0x1c4/0x4e0 [ 14.300698] worker_thread+0x2c8/0x528 [ 14.304431] kthread+0x138/0x140 [ 14.307646] ret_from_fork+0x10/0x18 [ 14.311205] ---[ end trace a2000ec2d838af4d ]--- This turned out to be due to the fbdev device hasn't been registered when drm_fbdev_generic_setup() is invoked. Let's fix the splat by moving it down after drm_dev_register() which will follow the "Display driver example" documented by commit de99f060 ("drm/drv: DOC: Add driver example code"). Signed-off-by:
Zenghui Yu <yuzenghui@huawei.com> Reviewed-by:
Xinliang Liu <xinliang.liu@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20200706144713.1123-1-yuzenghui@huawei.com
-
- Jul 02, 2020
-
-
Martin Blumenstingl authored
The burst length is configured in VIU_OSD1_FIFO_CTRL_STAT[31] and VIU_OSD1_FIFO_CTRL_STAT[11:10]. The public S905D3 datasheet describes this as: - 0x0 = up to 24 per burst - 0x1 = up to 32 per burst - 0x2 = up to 48 per burst - 0x3 = up to 64 per burst - 0x4 = up to 96 per burst - 0x5 = up to 128 per burst The lower two bits map to VIU_OSD1_FIFO_CTRL_STAT[11:10] while the upper bit maps to VIU_OSD1_FIFO_CTRL_STAT[31]. Replace meson_viu_osd_burst_length_reg() with pre-defined macros which set these values. meson_viu_osd_burst_length_reg() always returned 0 (for the two used values: 32 and 64 at least) and thus incorrectly set the burst size to 24. Fixes: 147ae1cb ("drm: meson: viu: use proper macros instead of magic constants") Signed-off-by:
Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by:
Neil Armstrong <narmstrong@baylibre.com> Reviewed-by:
Christian Hewitt <christianshewitt@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200620155752.21065-1-martin.blumenstingl@googlemail.com
-
- Jun 30, 2020
-
-
Chen-Yu Tsai authored
The HPD sense mechanism in Allwinner's old HDMI encoder hardware is more or less an input-only GPIO. Other GPIO-based HPD implementations directly return the current state, instead of polling for a specific state and returning the other if that times out. Remove the I/O polling from sun4i_hdmi_connector_detect() and directly return a known state based on the current reading. This also gets rid of excessive CPU usage by kworker as reported on Stack Exchange [1] and Armbian forums [2]. [1] https://superuser.com/questions/1515001/debian-10-buster-on-cubietruck-with-bug-in-sun4i-drm-hdmi [2] https://forum.armbian.com/topic/14282-headless-systems-and-sun4i_drm_hdmi-a10a20/ Fixes: 9c568101 ("drm/sun4i: Add HDMI support") Signed-off-by:
-
- Jun 25, 2020
-
-
Sumit Semwal authored
Charan Teja reported a 'use-after-free' in dmabuffs_dname [1], which happens if the dma_buf_release() is called while the userspace is accessing the dma_buf pseudo fs's dmabuffs_dname() in another process, and dma_buf_release() releases the dmabuf object when the last reference to the struct file goes away. I discussed with Arnd Bergmann, and he suggested that rather than tying the dma_buf_release() to the file_operations' release(), we can tie it to the dentry_operations' d_release(), which will be called when the last ref to the dentry is removed. The path exercised by __fput() calls f_op->release() first, and then calls dput, which eventually calls d_op->d_release(). In the 'normal' case, when no userspace access is happening via dma_buf pseudo fs, there should be exactly one fd, file, dentry and inode, so closing the fd will kill of everything right away. In the presented case, the dentry's d_release() will be called only when the dentry's last ref is released. Therefore, lets move dma_buf_release() from fops->release() to d_ops->d_release() Many thanks to Arnd for his FS insights :) [1]: https://lore.kernel.org/patchwork/patch/1238278/ Fixes: bb2bb903 ("dma-buf: add DMA_BUF_SET_NAME ioctls") Reported-by:
<syzbot+3643a18836bce555bff6@syzkaller.appspotmail.com> Cc: <stable@vger.kernel.org> [5.3+] Cc: Arnd Bergmann <arnd@arndb.de> Reported-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
-
Daniel Vetter authored
In the past we had a pile of hacks to orchestrate access between fbdev emulation and native kms clients. We've tried to streamline this, by always preferring the kms side above fbdev calls when a drm master exists, because drm master controls access to the display resources. Unfortunately this breaks existing userspace, specifically Xorg. When exiting Xorg first restores the console to text mode using the KDSET ioctl on the vt. This does nothing, because a drm master is still around. Then it drops the drm master status, which again does nothing, because logind is keeping additional drm fd open to be able to orchestrate vt switches. In the past this is the point where fbdev was restored, as part of the ->lastclose hook on the drm side. Now to fix this regression we don't want to go back to letting fbdev restore things whenever it feels like, or to the pile of hacks we've had before. Instead try and go with a minimal exception to make the KDSET case work again, and nothing else. This means that if userspace does a KDSET call when switching between graphical compositors, there will be some flickering with fbcon showing up for a bit. But a) that's not a regression and b) userspace can fix it by improving the vt switching dance - logind should have all the information it needs. While pondering all this I'm also wondering wheter we should have a SWITCH_MASTER ioctl to allow race-free master status handover. But that's for another day. v2: Somehow forgot to cc all the fbdev people. v3: Fix typo Alex spotted. Reviewed-by:
Alex Deucher <alexander.deucher@amd.com> Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=208179 Cc: shlomo@fastmail.com Reported-and-Tested-by:
<shlomo@fastmail.com> Cc: Michel Dänzer <michel@daenzer.net> Fixes: 64914da2 ("drm/fbdev-helper: don't force restores") Cc: Noralf Trønnes <noralf@tronnes.org> Cc: Thomas Zimmermann <tzimmermann@suse.de> Cc: Daniel Vetter <daniel.vetter@intel.com> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Maxime Ripard <mripard@kernel.org> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: dri-devel@lists.freedesktop.org Cc: <stable@vger.kernel.org> # v5.7+ Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Nathan Chancellor <natechancellor@gmail.com> Cc: Qiujun Huang <hqjagain@gmail.com> Cc: Peter Rosin <peda@axentia.se> Cc: linux-fbdev@vger.kernel.org Signed-off-by:
Daniel Vetter <daniel.vetter@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200624092910.3280448-1-daniel.vetter@ffwll.ch
-
- Jun 24, 2020
-
-
Maxime Ripard authored
The main DRM device is actually a virtual device so it doesn't have the iommus property, which is instead on the DMA masters, in this case the mixers. Add a call to of_dma_configure with the mixers DT node but on the DRM virtual device to configure it in the same way than the mixers. Reviewed-by:
Paul Kocialkowski <paul.kocialkowski@bootlin.com> Signed-off-by:
-
- Jun 23, 2020
-
-
Hans de Goede authored
The Acer S1003 has proper DMI strings for sys-vendor and product-name, so we do not need to match by BIOS-date. This means that the Acer S1003 can use the generic lcd800x1280_rightside_up drm_dmi_panel_orientation_data struct which is also used by other quirks. Reviewed-by:
Emil Velikov <emil.l.velikov@gmail.com> Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200531093025.28050-2-hdegoede@redhat.com
-
Hans de Goede authored
Like the Asus T100HA the Asus T101HA also uses a panel which has been mounted 90 degrees rotated, albeit in the opposite direction. Add a quirk for this. Reviewed-by:
-
- Jun 21, 2020
-
-
Bartlomiej Zolnierkiewicz authored
Fix the recent regression. Fixes: dbc7ece1 ("video: uvesafb: use true,false for bool variables") Cc: Jason Yan <yanaijie@huawei.com> Reviewed-by:
Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by:
-
Tomi Valkeinen authored
Add connector type for newhaven_nhd_43_480272ef_atxl, as drm_panel_bridge_add() requires connector type to be set. Signed-off-by:
Tomi Valkeinen <tomi.valkeinen@ti.com> Cc: stable@vger.kernel.org # v5.5+ Signed-off-by:
-
Adam Ford authored
The LogicPD Type28 display used by several Logic PD products has not worked since v5.6. The connector type for the LogicPD Type 28 display is missing and drm_panel_bridge_add() requires connector type to be set. Signed-off-by:
Adam Ford <aford173@gmail.com> Fixes: 0d35408a ("drm/panel: simple: Add Logic PD Type 28 display support") Cc: Adam Ford <aford173@gmail.com> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: dri-devel@lists.freedesktop.org Cc: <stable@vger.kernel.org> # v5.6+ Signed-off-by:
-
- Jun 17, 2020
-
-
Linus Walleij authored
Unable to handle kernel NULL pointer dereference at virtual address 00000918 pgd = (ptrval) [00000918] *pgd=00000000 Internal error: Oops: 5 [#1] SMP ARM Modules linked in: CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.7.0-15001-gfa384b50b96b-dirty #514 Hardware name: ST-Ericsson Ux5x0 platform (Device Tree Support) PC is at mcde_display_enable+0x78/0x7c0 LR is at mcde_display_enable+0x78/0x7c0 Fix this by using to_mcde() as in other functions. Fixes: fd7ee85c ("drm/mcde: Don't use drm_device->dev_private") Signed-off-by:
-
Linus Walleij authored
The following bug appeared in the MCDE driver/display initialization during the recent merge window. First the place we call drm_fbdev_generic_setup() in the wrong place: this needs to be called AFTER calling drm_dev_register() else we get this splat: ------------[ cut here ]------------ WARNING: CPU: 0 PID: 1 at ../drivers/gpu/drm/drm_fb_helper.c:2198 drm_fbdev_generic_setup+0x164/0x1a8 mcde a0350000.mcde: Device has not been registered. Modules linked in: Hardware name: ST-Ericsson Ux5x0 platform (Device Tree Support) [<c010e704>] (unwind_backtrace) from [<c010a86c>] (show_stack+0x10/0x14) [<c010a86c>] (show_stack) from [<c0414f38>] (dump_stack+0x9c/0xb0) [<c0414f38>] (dump_stack) from [<c0121c8c>] (__warn+0xb8/0xd0) [<c0121c8c>] (__warn) from [<c0121d18>] (warn_slowpath_fmt+0x74/0xb8) [<c0121d18>] (warn_slowpath_fmt) from [<c04b154c>] (drm_fbdev_generic_setup+0x164/0x1a8) [<c04b154c>] (drm_fbdev_generic_setup) from [<c04ed278>] (mcde_drm_bind+0xc4/0x160) [<c04ed278>] (mcde_drm_bind) from [<c04f06b8>] (try_to_bring_up_master+0x15c/0x1a4) (...) Signed-off-by:
-
- Jun 16, 2020
-
-
Thomas Zimmermann authored
Beginning a new release cycles for what will become v5.8. Updating drm-misc-fixes accordingly. Signed-off-by:
-
- Jun 15, 2020
-
-
Xiyu Yang authored
ttm_bo_add_move_fence() invokes dma_fence_get(), which returns a reference of the specified dma_fence object to "fence" with increased refcnt. When ttm_bo_add_move_fence() returns, local variable "fence" becomes invalid, so the refcount should be decreased to keep refcount balanced. The reference counting issue happens in one exception handling path of ttm_bo_add_move_fence(). When no_wait_gpu flag is equals to true, the function forgets to decrease the refcnt increased by dma_fence_get(), causing a refcnt leak. Fix this issue by calling dma_fence_put() when no_wait_gpu flag is equals to true. Signed-off-by:
Xiyu Yang <xiyuyang19@fudan.edu.cn> Signed-off-by:
Xin Tan <tanxin.ctf@gmail.com> Reviewed-by:
-
Xiyu Yang authored
ttm_bo_vm_fault_reserved() invokes dma_fence_get(), which returns a reference of the specified dma_fence object to "moving" with increased refcnt. When ttm_bo_vm_fault_reserved() returns, local variable "moving" becomes invalid, so the refcount should be decreased to keep refcount balanced. The reference counting issue happens in several exception handling paths of ttm_bo_vm_fault_reserved(). When those error scenarios occur such as "err" equals to -EBUSY, the function forgets to decrease the refcnt increased by dma_fence_get(), causing a refcnt leak. Fix this issue by calling dma_fence_put() when no_wait_gpu flag is equals to true. Signed-off-by:
-
Linus Torvalds authored
-
git://github.com/micah-morton/linuxLinus Torvalds authored
Pull SafeSetID update from Micah Morton: "Add additional LSM hooks for SafeSetID SafeSetID is capable of making allow/deny decisions for set*uid calls on a system, and we want to add similar functionality for set*gid calls. The work to do that is not yet complete, so probably won't make it in for v5.8, but we are looking to get this simple patch in for v5.8 since we have it ready. We are planning on the rest of the work for extending the SafeSetID LSM being merged during the v5.9 merge window" * tag 'LSM-add-setgid-hook-5.8-author-fix' of git://github.com/micah-morton/linux: security: Add LSM hooks to set*gid syscalls
-
Thomas Cedeno authored
The SafeSetID LSM uses the security_task_fix_setuid hook to filter set*uid() syscalls according to its configured security policy. In preparation for adding analagous support in the LSM for set*gid() syscalls, we add the requisite hook here. Tested by putting print statements in the security_task_fix_setgid hook and seeing them get hit during kernel boot. Signed-off-by:
Thomas Cedeno <thomascedeno@google.com> Signed-off-by:
Micah Morton <mortonm@chromium.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linuxLinus Torvalds authored
Pull btrfs updates from David Sterba: "This reverts the direct io port to iomap infrastructure of btrfs merged in the first pull request. We found problems in invalidate page that don't seem to be fixable as regressions or without changing iomap code that would not affect other filesystems. There are four reverts in total, but three of them are followup cleanups needed to revert a43a67a2 cleanly. The result is the buffer head based implementation of direct io. Reverts are not great, but under current circumstances I don't see better options" * tag 'for-5.8-part2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: Revert "btrfs: switch to iomap_dio_rw() for dio" Revert "fs: remove dio_end_io()" Revert "btrfs: remove BTRFS_INODE_READDIO_NEED_LOCK" Revert "btrfs: split btrfs_direct_IO to read and write part"
-
- Jun 14, 2020
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netLinus Torvalds authored
Pull networking fixes from David Miller: 1) Fix cfg80211 deadlock, from Johannes Berg. 2) RXRPC fails to send norigications, from David Howells. 3) MPTCP RM_ADDR parsing has an off by one pointer error, fix from Geliang Tang. 4) Fix crash when using MSG_PEEK with sockmap, from Anny Hu. 5) The ucc_geth driver needs __netdev_watchdog_up exported, from Valentin Longchamp. 6) Fix hashtable memory leak in dccp, from Wang Hai. 7) Fix how nexthops are marked as FDB nexthops, from David Ahern. 8) Fix mptcp races between shutdown and recvmsg, from Paolo Abeni. 9) Fix crashes in tipc_disc_rcv(), from Tuong Lien. 10) Fix link speed reporting in iavf driver, from Brett Creeley. 11) When a channel is used for XSK and then reused again later for XSK, we forget to clear out the relevant data structures in mlx5 which causes all kinds of problems. Fix from Maxim Mikityanskiy. 12) Fix memory leak in genetlink, from Cong Wang. 13) Disallow sockmap attachments to UDP sockets, it simply won't work. From Lorenz Bauer. * git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (83 commits) net: ethernet: ti: ale: fix allmulti for nu type ale net: ethernet: ti: am65-cpsw-nuss: fix ale parameters init net: atm: Remove the error message according to the atomic context bpf: Undo internal BPF_PROBE_MEM in BPF insns dump libbpf: Support pre-initializing .bss global variables tools/bpftool: Fix skeleton codegen bpf: Fix memlock accounting for sock_hash bpf: sockmap: Don't attach programs to UDP sockets bpf: tcp: Recv() should return 0 when the peer socket is closed ibmvnic: Flush existing work items before device removal genetlink: clean up family attributes allocations net: ipa: header pad field only valid for AP->modem endpoint net: ipa: program upper nibbles of sequencer type net: ipa: fix modem LAN RX endpoint id net: ipa: program metadata mask differently ionic: add pcie_print_link_status rxrpc: Fix race between incoming ACK parser and retransmitter net/mlx5: E-Switch, Fix some error pointer dereferences net/mlx5: Don't fail driver on failure to create debugfs net/mlx5e: CT: Fix ipv6 nat header rewrite actions ... -
David Sterba authored
This reverts commit a43a67a2. This patch reverts the main part of switching direct io implementation to iomap infrastructure. There's a problem in invalidate page that couldn't be solved as regression in this development cycle. The problem occurs when buffered and direct io are mixed, and the ranges overlap. Although this is not recommended, filesystems implement measures or fallbacks to make it somehow work. In this case, fallback to buffered IO would be an option for btrfs (this already happens when direct io is done on compressed data), but the change would be needed in the iomap code, bringing new semantics to other filesystems. Another problem arises when again the buffered and direct ios are mixed, invalidation fails, then -EIO is set on the mapping and fsync will fail, though there's no real error. There have been discussions how to fix that, but revert seems to be the least intrusive option. Link: https://lore.kernel.org/linux-btrfs/20200528192103.xm45qoxqmkw7i5yl@fiona/ Signed-off-by:
David Sterba <dsterba@suse.com>
-
Grygorii Strashko authored
On AM65xx MCU CPSW2G NUSS and 66AK2E/L NUSS allmulti setting does not allow unregistered mcast packets to pass. This happens, because ALE VLAN entries on these SoCs do not contain port masks for reg/unreg mcast packets, but instead store indexes of ALE_VLAN_MASK_MUXx_REG registers which intended for store port masks for reg/unreg mcast packets. This path was missed by commit 9d1f6447 ("net: ethernet: ti: ale: fix seeing unreg mcast packets with promisc and allmulti disabled"). Hence, fix it by taking into account ALE type in cpsw_ale_set_allmulti(). Fixes: 9d1f6447 ("net: ethernet: ti: ale: fix seeing unreg mcast packets with promisc and allmulti disabled") Signed-off-by:
Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Grygorii Strashko authored
The ALE parameters structure is created on stack, so it has to be reset before passing to cpsw_ale_create() to avoid garbage values. Fixes: 93a76530 ("net: ethernet: ti: introduce am65x/j721e gigabit eth subsystem driver") Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpfDavid S. Miller authored
Alexei Starovoitov says: ==================== pull-request: bpf 2020-06-12 The following pull-request contains BPF updates for your *net* tree. We've added 26 non-merge commits during the last 10 day(s) which contain a total of 27 files changed, 348 insertions(+), 93 deletions(-). The main changes are: 1) sock_hash accounting fix, from Andrey. 2) libbpf fix and probe_mem sanitizing, from Andrii. 3) sock_hash fixes, from Jakub. 4) devmap_val fix, from Jesper. 5) load_bytes_relative fix, from YiFei. ==================== Signed-off-by: -
Liao Pingfang authored
Looking into the context (atomic!) and the error message should be dropped. Signed-off-by:
Liao Pingfang <liao.pingfang@zte.com.cn> Signed-off-by:
-
git://git.samba.org/sfrench/cifs-2.6Linus Torvalds authored
Pull more cifs updates from Steve French: "12 cifs/smb3 fixes, 2 for stable. - add support for idsfromsid on create and chgrp/chown allowing ability to save owner information more naturally for some workloads - improve query info (getattr) when SMB3.1.1 posix extensions are negotiated by using new query info level" * tag '5.8-rc-smb3-fixes-part2' of git://git.samba.org/sfrench/cifs-2.6: smb3: Add debug message for new file creation with idsfromsid mount option cifs: fix chown and chgrp when idsfromsid mount option enabled smb3: allow uid and gid owners to be set on create with idsfromsid mount option smb311: Add tracepoints for new compound posix query info smb311: add support for using info level for posix extensions query smb311: Add support for lookup with posix extensions query info smb311: Add support for SMB311 query info (non-compounded) SMB311: Add support for query info using posix extensions (level 100) smb3: add indatalen that can be a non-zero value to calculation of credit charge in smb2 ioctl smb3: fix typo in mount options displayed in /proc/mounts cifs: Add get_security_type_str function to return sec type. smb3: extend fscache mount volume coherency check -
Linus Torvalds authored
Let's keep "git status" happy and quiet. Fixes: 9762dc14 ("samples: add binderfs sample program Fixes: fca5e949 ("samples: binderfs: really compile this sample and fix build issues") Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
