- Oct 15, 2013
-
-
Lars-Peter Clausen authored
The driver is casting from one __iomem pointer to another. Make sure to include __iomem in the cast, otherwise sparse will complain with the following warning: drivers/staging/iio/adc/spear_adc.c:321:18: warning: cast removes address space of expression drivers/staging/iio/adc/spear_adc.c:320:33: warning: incorrect type in assignment (different address spaces) drivers/staging/iio/adc/spear_adc.c:320:33: expected struct adc_regs_spear3xx [noderef] <asn:2>*adc_base_spear3xx drivers/staging/iio/adc/spear_adc.c:320:33: got struct adc_regs_spear3xx *<noident> Signed-off-by:
Lars-Peter Clausen <lars@metafoo.de> Cc: Stefan Roese <sr@denx.de> Signed-off-by:
Jonathan Cameron <jic23@kernel.org>
-
- Oct 12, 2013
-
-
Lars-Peter Clausen authored
Remove the scale_mv variable from the read_raw() callback. Fixes the following warning: drivers/staging/iio/adc/spear_adc.c: In function 'spear_read_raw': drivers/staging/iio/adc/spear_adc.c:149:6: warning: unused variable 'scale_mv' Signed-off-by:
-
Lars-Peter Clausen authored
Since the kernel now disables all buffers when a device is unregistered it might happen that a in-kernel consumer tries to disable that buffer again. So ignore requests where the buffer already is in the desired state. Signed-off-by:
-
Lars-Peter Clausen authored
Register the event threshold hysteresis attributes by using the new IIO_EV_INFO_HYSTERESIS event spec type. This allows us to throw away a good portion of boiler-plate code. Signed-off-by:
-
Lars-Peter Clausen authored
Register the event threshold hysteresis attributes by using the new IIO_EV_INFO_HYSTERESIS event spec type. This allows us to throw away a good portion of boiler-plate code. Signed-off-by:
-
Lars-Peter Clausen authored
Given a channel number the corresponding threshold and hysteresis registers can easily be calculated. No need to use a look-up table. Signed-off-by:
-
Lars-Peter Clausen authored
For some devices it is possible to configure a hysteresis for threshold (or similar) events. This patch adds a new hysteresis event info type which allows for easy creation and read/write handling of the sysfs attribute. Signed-off-by:
-
Lars-Peter Clausen authored
Switch the tsl2x7x driver to the new IIO event config interface as the old one is going to be removed. Signed-off-by:
-
Lars-Peter Clausen authored
Switch the simple_dummy driver to the new IIO event config interface as the old one is going to be removed. Signed-off-by:
-
Lars-Peter Clausen authored
Switch the ad7150 driver to the new IIO event config interface as the old one is going to be removed. Signed-off-by:
-
Lars-Peter Clausen authored
Switch the ad799x driver to the new IIO event config interface as the old one is going to be removed. Signed-off-by:
-
Lars-Peter Clausen authored
Switch the ad7291 driver to the new IIO event config interface as the old one is going to be removed. Signed-off-by:
-
Lars-Peter Clausen authored
Switch the sca3000 driver to the new IIO event config interface as the old one is going to be removed. Signed-off-by:
-
Lars-Peter Clausen authored
The threshold event can be enabled/disabled separately, but the threshold value is shared between all three axis. Signed-off-by:
-
Lars-Peter Clausen authored
Switch the lis3l02dq driver to the new IIO event config interface as the old one is going to be removed. Signed-off-by:
-
Lars-Peter Clausen authored
Switch the apds9300 driver to the new IIO event config interface as the old one is going to be removed. Signed-off-by:
-
Lars-Peter Clausen authored
Switch the tsl2563 driver to the new IIO event config interface as the old one is going to be removed. Signed-off-by:
-
Lars-Peter Clausen authored
Switch the gp2ap020a00f driver to the new IIO event config interface as the old one is going to be removed. Signed-off-by:
-
Lars-Peter Clausen authored
Switch the ad5421 driver to the new IIO event config interface as the old one is going to be removed. Signed-off-by:
-
Lars-Peter Clausen authored
Switch the max1363 driver to the new IIO event config interface as the old one is going to be removed. Signed-off-by:
-
Lars-Peter Clausen authored
The event configuration interface of the IIO framework has not been getting the same attention as other parts. As a result it has not seen the same improvements as e.g. the channel interface has seen with the introduction of the channel spec struct. Currently all the event config callbacks take a u64 (the so called event code) to pass all the different information about for which event the callback is invoked. The callback function then has to extract the information it is interested in using some macros with rather long names. Most information encoded in the event code comes straight from the iio_chan_spec struct the event was registered for. Since we always have a handle to the channel spec when we call the event callbacks the first step is to add the channel spec as a parameter to the event callbacks. The two remaining things encoded in the event code are the type and direction of the event. Instead of passing them in one parameter, add one parameter for each of them and remove the eventcode from the event callbacks. The patch also adds a new iio_event_info parameter to the {read,write}_event_value callbacks. This makes it possible, similar to the iio_chan_info_enum for channels, to specify additional properties other than just the value for an event. Furthermore the new interface will allow to register shared events. This is e.g. useful if a device allows configuring a threshold event, but the threshold setting is the same for all channels. To implement this the patch adds a new iio_event_spec struct which is similar to the iio_chan_spec struct. It as two field to specify the type and the direction of the event. Furthermore it has a mask field for each one of the different iio_shared_by types. These mask fields holds which kind of attributes should be registered for the event. Creation of the attributes follows the same rules as the for the channel attributes. E.g. for the separate_mask there will be a attribute for each channel with this event, for the shared_by_type there will only be one attribute per channel type. The iio_chan_spec struct gets two new fields, 'event_spec' and 'num_event_specs', which is used to specify which the events for this channel. These two fields are going to replace the channel's event_mask field. For now both the old and the new event config interface coexist, but over the few patches all drivers will be converted from the old to the new interface. Once that is done all code for supporting the old interface will be removed. Signed-off-by: -
Lars-Peter Clausen authored
Signed-off-by:
-
Sebastian Andrzej Siewior authored
The `ret´ variable is only initialized in the error case. For some reason it was always != 0 while I played with generic_buffer so here is a patch. Signed-off-by:
Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by:
-
Lars-Peter Clausen authored
We have the same code to free a IIO device attribute list in multiple place. This patch adds a new helper function to take care of this and replaces the custom instances with a call to the helper function. Note that we do not need to call list_del() for each of the list items since we will never look at any of the list items nor the list itself again. Signed-off-by:
-
Lars-Peter Clausen authored
We need to make sure that in-kernel users of iio_update_buffers() do not race against each other or against unregistration of the device. So we need to take both the mlock and the info_exist_lock when calling iio_update_buffers() from a in-kernel consumer. Signed-off-by:
-
Lars-Peter Clausen authored
Once the device has been unregistered there won't be any new data no matter how long a userspace application waits, so we might as well wake them up and let them know. Signed-off-by:
-
Lars-Peter Clausen authored
If the IIO device has been unregistered return -ENODEV for any further file operations like read() and ioctl(). This avoids userspace being able to grab new references to the device. Signed-off-by:
-
Lars-Peter Clausen authored
Since the buffer is accessed by userspace we can not just free the buffers memory once we are done with it in kernel space. There might still be open file descriptors and userspace still might be accessing the buffer. This patch adds support for reference counting to the IIO buffers. When a buffer is created and initialized its initial reference count is set to 1. Instead of freeing the memory of the buffer the buffer's _free() function will drop that reference again. But only after the last reference to the buffer has been dropped the buffer the buffer's memory will be freed. The IIO device will take a reference to its primary buffer. The patch adds a small helper function for this called iio_device_attach_buffer() which will get a reference to the buffer and assign the buffer to the IIO device. This function must be used instead of assigning the buffer to the device by hand. The reference is only dropped once the IIO device is freed and we can be sure that there are no more open file handles. A reference to a buffer will also be taken whenever the buffer is active to avoid the buffer being freed while data is still being send to it. Signed-off-by:
-
- Oct 10, 2013
-
-
Josh Wu authored
CC: devicetree@vger.kernel.org Signed-off-by:
Josh Wu <josh.wu@atmel.com> Acked-by:
Ludovic Desroches <ludovic.desroches@atmel.com> Signed-off-by:
-
Josh Wu authored
Since in at91sam9x5, sama5d3x chip. the start up time calucation is changed. This patch can choose different start up time calculation formula for different chips. Signed-off-by:
Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by:
-
- Oct 07, 2013
-
-
Ebru Akagunduz authored
Fix checkpatch.pl issues with quoted string split across lines in adt7316-i2c.c Signed-off-by:
Ebru Akagunduz <ebru.akagunduz@gmail.com> Reviewed-by:
Josh Triplett <josh@joshtriplett.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Ebru Akagunduz authored
Fix checkpatch.pl issues with quoted string split across lines in adt7316-spi.c Signed-off-by:
-
Ebru Akagunduz authored
Fix checkpatch.pl issues with prefer netdev_info(netdev, .. then dev_info(dev, .. then pr_info(... to printk(KERN_INFO .. in lis3l02dq_ring.c Signed-off-by:
-
Ebru Akagunduz authored
Fix checkpatch.pl issues with space prohibited before semicolon in lis3l02dq_ring.c Signed-off-by:
-
Ebru Akagunduz authored
Fix checkpatch.pl issues with line over 80 characters in iio_simple_dummy.c Signed-off-by:
-
Ebru Akagunduz authored
Fix checkpatch.pl issues with quoted strings split across lines in xillybus_core.c Signed-off-by:
-
Ebru Akagunduz authored
Fix checkpatch.pl issues quoted string split across lines in usb.c Signed-off-by:
-
Ebru Akagunduz authored
Fix checkpatch.pl issues please, no space before tabs in drivers/staging/tidspbridge/rmgr/dspdrv.c Signed-off-by:
-
Dulshani Gunawardhana authored
Replace kern_debug with pr_debug in go7007-usb.c Signed-off-by:
Dulshani Gunawardhana <dulshani.gunawardhana89@gmail.com> Reviewed-by:
-
Dulshani Gunawardhana authored
Fixes checkpatch.pl warning "suspect code indent for conditional statements" for comet.c. Signed-off-by:
-
