- May 11, 2011
-
-
Ramesh Babu K V authored
This patch fixes the below issues w.r.t jack implementation a) The current jack implementation in driver is implemented in intelmid.c. It has moved to vendor files for better managebility b) Cleaned up jack reporting per upstream comments c) Implemented jack for msic, added code to read adc and deduce jack type based on mic bias d) Support detection of american headset Signed-off-by:
Dharageswari R <dharageswari.r@intel.com> Signed-off-by:
Ramesh Babu K V <ramesh.babu@intel.com> [Corrections] Signed-off-by:
Lu Guanqun <guanqun.lu@intel.com> Signed-off-by:
Alan Cox <alan@linux.intel.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@suse.de>
-
Sitanshu Nanavati authored
This patch adds support for configuring and routing the DMICs (assigned HW route to DMICs) Signed-off-by:
Sitanshu Nanavati <sitanshu.nanavati@intel.com> Signed-off-by:
-
Vinod Koul authored
This patch adds new IOCTL for application interface. Using parameter tuning IOCTL, application can fine tune the audio firmware for it's requirement. Signed-off-by:
Vinod Koul <vinod.koul@intel.com> Signed-off-by:
-
Dharageswari R authored
This patch adds the support for lineout. The lineout input can be selected as any input channel by using a new alsa mixer kcontrol. Signed-off-by:
-
Vinod Koul authored
The irq for audio is shared, so when device is supended driver should not the read register and ignore the interrupt. This patch ignores interrupts when device is suspended. Signed-off-by:
-
Vinod Koul authored
The current driver remove was erroneous and causes errors when unloading or loading second time This patch fixes both of these issues Signed-off-by:
-
Vinod Koul authored
This patch adds power optimization for the msic codec and ensure codec is completely powered off when codec is idle. Signed-off-by:
-
Lu Guanqun authored
Add several include files to fix the below compile error. drivers/staging/intel_sst/intelmid.c: In function ‘snd_intelmad_sst_register’: drivers/staging/intel_sst/intelmid.c:805:2: error: ‘sst_drv_ctx’ undeclared (first use in this function) drivers/staging/intel_sst/intelmid.c:805:2: note: each undeclared identifier is reported only once for each function it appears in Signed-off-by:
Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by:
-
Vinod Koul authored
During suspend and runtime_suspend audio dsp will be in D3 state and will loose its context. This patch adds support in driver to save the dsp context and restore this context during resume Signed-off-by:
-
Lu Guanqun authored
register_sst_card is used in ASoC code with field `scard_ops` being NULL. Without this patch, there will be NULL dereference. Signed-off-by:
-
Randy Dunlap authored
Don't use "SUCCESS" as a macro name. This collides with SCSI's macro of the same name, but with a different value: drivers/staging/keucr/smcommon.h:9:9: warning: preprocessor token SUCCESS redefined include/scsi/scsi.h:463:9: this was the original definition Signed-off-by:
Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by:
-
Randy Dunlap authored
Eliminate sparse warnings in ms.c: drivers/staging/keucr/ms.c:28:58: warning: right shift by bigger than source value drivers/staging/keucr/ms.c:31:58: warning: right shift by bigger than source value drivers/staging/keucr/ms.c:789:59: warning: cast truncates bits from constant value (ffffff7f becomes 7f) Signed-off-by:
-
Randy Dunlap authored
Make lots of functions and data static (fixes sparse warnings). Fix 5 functions to use ANSI format for function parameters (fixes sparse warnings). Signed-off-by:
-
Kalle Valo authored
Signed-off-by:
Kalle Valo <kalle.valo@atheros.com> Signed-off-by:
-
Stephane Pajot authored
This is a patch to the jr3_pci.c file that fixes up a brace warning found by the checkpatch.pl tool Signed-off-by:
Stephane Pajot <pajot.stephane@gmail.com> Signed-off-by:
-
Alan Cox authored
The error path from gtt_alloc returns NULL not a ptr error. The underlying fail is caused by a bug in the size calculation. With these two fixed it passes kmstest, although it's not really doing anything useful yet. Signed-off-by:
-
Alan Cox authored
Route everything via the proper DRM layer calls. This fixes the crash in plymouth and is also necessary to begin supporting libkms. Signed-off-by:
-
Joe Perches authored
Found via coccinelle script @@ type T; T* ptr; expression E1; @@ * memset(E1, 0, sizeof(ptr)); Signed-off-by:
Joe Perches <joe@perches.com> Acked-by:
Roland Vossen <rvossen@broadcom.com> Signed-off-by:
-
Arend van Spriel authored
Patch "[59807ce] local used function made static" introduced a new checkpatch warning which is fixed with this patch. Cc: devel@linuxdriverproject.org Cc: linux-wireless@vger.kernel.org Reviewed-by:
Roland Vossen <rvossen@broadcoom.com> Reviewed-by:
Henry Ptasinski <henryp@broadcom.com> Reviewed-by:
Brett Rudley <brudley@broadcom.com> Signed-off-by:
Arend van Spriel <arend@broadcom.com> Signed-off-by:
-
Arend van Spriel authored
wlc_phy_compute_dB converts absolute power value to dB implementing a fixed point calculation for 10*log10(x). It does this by determining the most significant bit for value x. This can be done using the fls() bit operation, which has arch specific and possibly more efficient implementation. Cc: devel@linuxdriverproject.org Cc: linux-wireless@vger.kernel.org Reviewed-by:
-
Arend van Spriel authored
The driver code had its own implementation for fixed point square root calculation, but such a function is already available in the linux kernel so the driver implementation has been removed using the kernel function. Cc: devel@linuxdriverproject.org Cc: linux-wireless@vger.kernel.org Reviewed-by:
-
Arend van Spriel authored
The function wlc_phy_qdiv_roundup() was not used and has been removed. Cc: devel@linuxdriverproject.org Cc: linux-wireless@vger.kernel.org Reviewed-by:
-
Arend van Spriel authored
The function wlc_aggregatable is used by wl_mac80211.c. The prototype of the function was placed in include file wlc_scb.h but the interface for wl_mac80211.c to other driver functions is to be placed in wlc_pub.h. Cc: devel@linuxdriverproject.org Cc: linux-wireless@vger.kernel.org Reviewed-by:
-
Arend van Spriel authored
In wlc_alloc.c function for setting ID field in struct wlc_bsscfg was only used locally. It has been made static and removed from header file. Cc: devel@linuxdriverproject.org Cc: linux-wireless@vger.kernel.org Reviewed-by:
-
Henry Ptasinski authored
The functions gitvar() and getintvar() are only used by brcmsmac, so move them out of the bcmutils.c file, which is shared by both brcmsmac and brcmfmac. Cc: devel@linuxdriverproject.org Cc: linux-wireless@vger.kernel.org Reviewed-by:
-
Henry Ptasinski authored
nvram functions are only needed by brcmsmac. Cc: devel@linuxdriverproject.org Cc: linux-wireless@vger.kernel.org Reviewed-by:
-
Henry Ptasinski authored
The get_flash_nvram() function is unused, so remove it. Cc: devel@linuxdriverproject.org Cc: linux-wireless@vger.kernel.org Reviewed-by:
-
Henry Ptasinski authored
No include files are needed from the util directory, so remove that directory from the include path. Cc: devel@linuxdriverproject.org Cc: linux-wireless@vger.kernel.org Reviewed-by:
-
Henry Ptasinski authored
This header file is no longer needed. Cc: devel@linuxdriverproject.org Cc: linux-wireless@vger.kernel.org Reviewed-by:
-
Henry Ptasinski authored
This files are no longer needed. Cc: devel@linuxdriverproject.org Cc: linux-wireless@vger.kernel.org Reviewed-by:
-
Henry Ptasinski authored
A number of files in the util subdir are only used by the brcmsmac driver. Move those files into the brcmsmac subdir instead, and do the necessary Makefile updates to get the files from the new location. Cc: devel@linuxdriverproject.org Cc: linux-wireless@vger.kernel.org Reviewed-by:
-
Henry Ptasinski authored
Move the pci_core.h header file from util to include subdir, in preparation for other moves and cleanup. Cc: devel@linuxdriverproject.org Cc: linux-wireless@vger.kernel.org Reviewed-by:
-
Henry Ptasinski authored
This include file is no longer needed. Cc: devel@linuxdriverproject.org Cc: linux-wireless@vger.kernel.org Reviewed-by:
-
Henry Ptasinski authored
The cis_hnbuvars structure is completely unused, so it can be deleted. Cc: devel@linuxdriverproject.org Cc: linux-wireless@vger.kernel.org Reviewed-by:
-
Henry Ptasinski authored
The softmac and fullmac drivers can use the same implementation of pktq_flush(), so remove the unnecessary version. Cc: devel@linuxdriverproject.org Cc: linux-wireless@vger.kernel.org Reviewed-by:
-
Arend van Spriel authored
Several code path in the wl_ops_bss_info_changed() callback were not using the perimeter lock. This gives potential of raise conditions so lock/unlock calls have been added. Cc: devel@linuxdriverproject.org Cc: linux-wireless@vger.kernel.org Reviewed-by:
-
- May 07, 2011
-
-
Javier M. Mellid authored
This patch implements dynamic framebuffer mode setting. Previous code works with mode setting in a hard code way. Previous hard code configuration is used as default configuration if dynamic mode setting or boot mode setting (via sm712vga_setup) is not used. Tested with SM712 supporting 1024x600x16 as default hardware resolution. Changes: - Implement fb_check_var and fb_set_par callbacks - Remove __maybe_unused decorator in function being used (sm712vga_setup) - Minor cleanup on initialization structs related with mode settings - Updated author copyright - Updated TODO file Signed-off-by:
Javier M. Mellid <jmunhoz@igalia.com> Signed-off-by:
-
matt mooney authored
Modify description and email address for usbip_common_mod; export module version number; and modify __init messages slightly. Signed-off-by:
matt mooney <mfm@muteddisk.com> Signed-off-by:
-
matt mooney authored
Also, removes the one-line comments that were associated with some of the dividers because they provided no additional information. Signed-off-by:
-
matt mooney authored
For consistency, a break statement is added to all default cases that do not jump to a label. Signed-off-by:
-
