gb_loopback_ro_avg_attr() is using "/" to divide two 64-bit integer,
causing a reference to __aeabi_uldivmod() that is not availalbe on 32-bit.
Instead, use do_div().

Signed-off-by: Alexandre Bailon <abailon@baylibre.com>
Reviewed-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

Mark the SVC Bundle-class id as unused.

Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Reviewed-by: Jeffrey Carlyle <jcarlyle@google.com>
Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

Mark the AP Bundle-class and protocol ids as unused.

Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Jeffrey Carlyle <jcarlyle@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

Patch "c3b0a32 Loopback_test: use poll instead of inotify"
added a optional argument for the user to specify a timeout value,
but did not use this parameter in the actual poll function. The
default of 30 seconds is always used.

Fix this by actually using the the poll_timeout parameter so the user
can run long tests.

Signed-off-by: Axel Haslam <ahaslam@baylibre.com>
Reviewed-by: Patrick Titiano <ptitiano@baylibre.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

GPIO number obtained from of_get_named_gpio() should be signed to allow
error handling.

Testing Done:
Built & booted on EVT1.5

Signed-off-by: David Lin <dtwlin@google.com>
Reviewed-by: Vaibhav Hiremath <vaibhav.hiremath@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

A patch from created struct gb_control_timesync_enable_request,
but forgot to properly annotate that the fields are little-endian.  The
code is correct in treating them this way, so there isn't a bug, but
sparse complains.

Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

Following Toshiba's recommendation we shouldn't use E2EFC on a CSI connection.
Disable E2EFC on the CSI connection.

Signed-off-by: Fabien Parent <fparent@baylibre.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

Rename the CPort-features callbacks, that are not just used to enable
FCT flow, to the more descriptive cport_features_enable/disable.

Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

Add CSD connection flag that can be specified when allocating a
connection to enable Controlled Segment Dropping in favour of E2EFC
which is enabled by default.

Note that most connections are expected to have E2EFC enabled.

Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

Generalise the svc connection-create helper to accept a cport-flags
argument and handle the flags in the connection code instead.

Note that the camera driver currently manages its data connection
directly. We keep E2EFC enabled for now even though it will soon need
to be disabled due to some pending firmware updates.

Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

Clean up CPortFlags handling and explicitly disable CSD when E2EFC is
enabled (CSD_n is ignored when E2EFC is set).

Note that the bootrom requires E2EFC, CSD, and CSV to all be disabled.

Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

Add interface for associating a flag bitmask with a connection when
creating it.

Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

Simple addition of the TimeSync commands defined in the specification.
Note for the case of timesync_authoritative we're passing the request
structure directly so as not to have to pass eight parameters into the
function.

Adds:
- control.c::timesync_enable(u8 count, u64 frame_time,
                             u32 strobe_delay, u32 refclk)
  Informs an Interface to expect count TimeSync strobe pulses with
  strobe_delay milliseconds delay between each strobe. Once enabled
  an Interface may not enter a low-power mode which will result in the
  reference timer used to track time switching off.

- control.c::timesync_disable(void)
  Commands an Interface to immediately halt TimeSync logic. This will allow
  an Interface to transition into low-power modes where the reference time
  being used for TimeSync may switch off.

- control.c::timesync_authoritative(u64 *frame_time, u8 count)
  Used by the AP Module to inform an Interface of the authoritative
  TimeSync clock-master time at each strobe pulse. Down-stream clock slaves
  shall adjust their local frame-time appropriately based on the
  diseminated authoritative frame-time.

Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

This patch adds the protocol command extenions for SVC and Control
protocols to the greybus_protocols definition header consistent with
the greybus-spec.

Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

This patch adds the protocol command/response definitions for the SVC and
Control protocols to the greybus_protocols definition header consistent
with the greybus-spec.

Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

This reserves the bridged phy class number to be used later on.

Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Johan Hovold <johan@hovoldconsulting.com>

Create gpbridge.h for the gpbridge-specific function prototypes, the
rest of the greybus drivers don't care about them.

Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Johan Hovold <johan@hovoldconsulting.com>

Set retries operation was removed from the Greybus specification. Remove
gb_i2c_retries_operation and all other no longer necessary code bits from the
Greybus kernel code.

Signed-off-by: Michael Mogenson <michael.mogenson@leaflabs.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

Set timeout operation was removed from the Greybus specification. Remove
gb_i2c_timeout_operation and all other no longer necessary code bits from the
Greybus kernel code.

Signed-off-by: Michael Mogenson <michael.mogenson@leaflabs.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

Use hexadecimal notation for request types in log messages.

Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Alex Elder <elder@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

Make sure not count errors during asynchronous tests twice (first in
the timeout handler then again in the completion handler) to avoid
obviously broken error stats such as:

$ loopback_test -i 1000 -t transfer -p -o 200000 -c 64 -x -s 2000

1970-1-1 1:3:35
 test:                  transfer
 path:                  gb_loopback0
 size:                  2000
 iterations:            1000
 errors:                1998
 async:                 Enabled
 requests per-sec:      min=0, max=0, average=0.310556, jitter=0
 ap-throughput B/s:     min=0 max=4026 average=1254.647461 jitter=4026
 ap-latency usec:       min=12803 max=12803 average=12803.000000 jitter=0
 apbridge-latency usec: min=89 max=89 average=89.000000 jitter=0
 gpbridge-latency usec: min=294 max=294 average=294.000000 jitter=0

where we supposedly have more errors than iterations (operations
initiated).

Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

Provide finer-grained control of the audio streaming on APB1 by
splitting the transmit/receive start and stop requests into prepare,
start, stop, and shutdown.

CC: Vaibhav Agarwal <vaibhav.agarwal@linaro.org>
Signed-off-by: Mark Greer <mgreer@animalcreek.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

Inotify does not handle sysfs events, so use poll instead.

The loopback kernel driver will send a notification when the test is
complete. So, open a poll file descriptor for every enabled device,
and after starting the test, wait for an event from each device.
After all events are received, read the total number of iterations
and make sure the test is complete.

Also, add missing stdint header which was included in inotify.

Signed-off-by: Axel Haslam <ahaslam@baylibre.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

Currently, user space is notified for every message sent,
but this is not really needed and does not work in the async case
where all messages are sent from the start.

Instead, notify userspace only when all the transfers are complete.
This allows userspace to wait in a poll loop and wakeup only when
the test is finished.

Also, don't use the bundle kobj to send the notification it is
the loopback device that contains the loopback attributes.

Signed-off-by: Axel Haslam <ahaslam@baylibre.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

WARN_ON() is a bit harsh here, as we just failed to power-off the HID
device while it is getting removed.

Replace it with dev_err().

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

hid_destroy_device() can potentially call callbacks defined in struct
hid_ll_driver, which may initiate few greybus operations.

And so connection (tx) should be kept enabled until the hid-device isn't
destroyed.

Reported-by: Jiss Kuruvila <jkuruvila@google.com>
Reported-by: Laurent Pinchart <laurent.pinchart@linaro.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

Currently, it is assumed that all audio data CPorts registered on
APB1 are used for transmitting audio data.  That may not always be
true like when a microphone is connected but no speakers.  Also,
the current special protocol lacks a way to tell APB1 whether the CPort
being registered is for transmitting, receiving, or both.

Fix by adding a 'direction' field to the register and unregister CPort
requests and define bits indicating which direction (or both) audio
data will go on that CPort.

Signed-off-by: Mark Greer <mgreer@animalcreek.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

Now that userspace is ready for all 32 bits of the vid/pid, take off our
mask and send the full values.

Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

Currently, we are adding 0.5 to the average to round the average.
But we are using the remainder to calculate the decimal, so we do not
need to round the average.
In addition, use a u64 type for the remainder to avoid overflow
that might happen when stats->sum value is too big,
usually for requests per seconds and the throughput.

Signed-off-by: Alexandre Bailon <abailon@baylibre.com>
Reviewed-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

Throughput and requests per second calculations are broken for
asynchronous request.
Instead of calculate the throughput for each iteration,
calculate it once at the end of the test.
In addition, update every seconds the min and the max
for throughput and requests per second.

Signed-off-by: Alexandre Bailon <abailon@baylibre.com>
Reviewed-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

Currently, in case the case of error, statistics are updated for
asynchronous but not for an asynchronous operation.
Do not update the statistics in the case of error.

Signed-off-by: Alexandre Bailon <abailon@baylibre.com>
Reviewed-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

For the async ping transfer, statistics are counted twice,
once after the after the gb_loopback_async_operation() and
once in the callback.
Only keep the one in the callback.

Signed-off-by: Alexandre Bailon <abailon@baylibre.com>
Reported-by: Johan Hovold <johan@hovoldconsulting.com>
Reviewed-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

lights can never be NULL at that point since lights_count must be different than
zero, and we need only to validate the light_id.

Reported-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Rui Miguel Silva <rui.silva@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

HUB3613 configuration, either disable (Standby mode) or enable (HUB mode)
is related to APB. So it makes perfect sense to put both of them
together in one function.

HUB3613 enable happens only at one place, in hub_conf_delayed_work() fn,
but disable is initiated from multiple places.
Move all calls to usb3613_hub_mode_ctrl(false) to apb_poweroff().

Testing Done: Tested on DB3.5 platform.

Signed-off-by: Vaibhav Hiremath <vaibhav.hiremath@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

On first wake/detect pulse, everything works fine, as APB would be
in poweroff state initially.
But on subsequent wake/detect pulses, where APB is already in active
state, internal function just returns doing nothing, as it finds that
device is already in active state.

So the solution would be to make sure that, whenever execution reaches
to coldboot, make sure we power cycle it. Power off first, before
powering on.

Interrupt handler takes care of ignoring < 30msec pulses, so we should
be safe here to power cycle APB.

Testing Done: Testd on DB3.5 platform.

Signed-off-by: Vaibhav Hiremath <vaibhav.hiremath@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

Add support for operations with short responses.

So far we have assumed that the initiator of an operation always knows
the exact size of the expected response. This is however not always the
case and we've worked around this limitation in a couple of places by,
for example, first requesting the size of a resource before fetching the
actual data.

To avoid such workarounds and simplify our protocols, add a
short-response flag that can be set when allocating an operation. When
this flag is set on an operation, core will accept a response that is
shorter than the size of the (pre-allocated) response payload buffer.

For now, we update the response-message payload_size field to reflect
the actual length of the response received.

Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Tested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

As a preparatory clean up, add a temporary variable to point to the
response message header.

Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Tested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

In poweroff() fn, we are shutting down SVC, so disable interrupt
as well.

Testing Done: Tested on DB3.5 platform.

Signed-off-by: Vaibhav Hiremath <vaibhav.hiremath@linaro.org>
Reviewed-by: Michael Scott <michael.scott@linaro.org>
Tested-by: Michael Scott <michael.scott@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

With support of interrupt based mechanism, gpio is not longer set to
output mode, so gpio_set_value won't work. So use
gpio_direction_output() fn in poweroff(), while setting value on
wake/detect line.

Testing Done: Tested on DB3.5 platform.

Signed-off-by: Vaibhav Hiremath <vaibhav.hiremath@linaro.org>
Reviewed-by: Michael Scott <michael.scott@linaro.org>
Tested-by: Michael Scott <michael.scott@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

Since now driver supports interrupt based mechanism to read events
from SVC over wake/detect line, no need to delay wake/detect assertion.
We can assert wake/detect after SVC reset deassertion, so during boot
itself SVC will start sending wake_out pulses.

Testing Done: Tested on DB3.5 platform.

Signed-off-by: Vaibhav Hiremath <vaibhav.hiremath@linaro.org>
Reviewed-by: Michael Scott <michael.scott@linaro.org>
Tested-by: Michael Scott <michael.scott@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>