- Aug 22, 2020
-
-
Charan Teja Reddy authored
The following race is observed with the repeated online, offline and a delay between two successive online of memory blocks of movable zone. P1 P2 Online the first memory block in the movable zone. The pcp struct values are initialized to default values,i.e., pcp->high = 0 & pcp->batch = 1. Allocate the pages from the movable zone. Try to Online the second memory block in the movable zone thus it entered the online_pages() but yet to call zone_pcp_update(). This process is entered into the exit path thus it tries to release the order-0 pages to pcp lists through free_unref_page_commit(). As pcp->high = 0, pcp->count = 1 proceed to call the function free_pcppages_bulk(). Update the pcp values thus the new pcp values are like, say, pcp->high = 378, pcp->batch = 63. Read the pcp's batch value using READ_ONCE() and pass the same to free_pcppages_bulk(), pcp values passed here are, batch = 63, count = 1. Since num of pages in the pcp lists are less than ->batch, then it will stuck in while(list_empty(list)) loop with interrupts disabled thus a core hung. Avoid this by ensuring free_pcppages_bulk() is called with proper count of pcp list pages. The mentioned race is some what easily reproducible without [1] because pcp's are not updated for the first memory block online and thus there is a enough race window for P2 between alloc+free and pcp struct values update through onlining of second memory block. With [1], the race still exists but it is very narrow as we update the pcp struct values for the first memory block online itself. This is not limited to the movable zone, it could also happen in cases with the normal zone (e.g., hotplug to a node that only has DMA memory, or no other memory yet). [1]: https://patchwork.kernel.org/patch/11696389/ Fixes: 5f8dcc21 ("page-allocator: split per-cpu list into one-list-per-migrate-type") Signed-off-by:
Charan Teja Reddy <charante@codeaurora.org> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Acked-by:
David Hildenbrand <david@redhat.com> Acked-by:
David Rientjes <rientjes@google.com> Acked-by:
Michal Hocko <mhocko@suse.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Vinayak Menon <vinmenon@codeaurora.org> Cc: <stable@vger.kernel.org> [2.6+] Link: http://lkml.kernel.org/r/1597150703-19003-1-git-send-email-charante@codeaurora.org Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Doug Berger authored
The lowmem_reserve arrays provide a means of applying pressure against allocations from lower zones that were targeted at higher zones. Its values are a function of the number of pages managed by higher zones and are assigned by a call to the setup_per_zone_lowmem_reserve() function. The function is initially called at boot time by the function init_per_zone_wmark_min() and may be called later by accesses of the /proc/sys/vm/lowmem_reserve_ratio sysctl file. The function init_per_zone_wmark_min() was moved up from a module_init to a core_initcall to resolve a sequencing issue with khugepaged. Unfortunately this created a sequencing issue with CMA page accounting. The CMA pages are added to the managed page count of a zone when cma_init_reserved_areas() is called at boot also as a core_initcall. This makes it uncertain whether the CMA pages will be added to the managed page counts of their zones before or after the call to init_per_zone_wmark_min() as it becomes dependent on link order. With the current link order the pages are added to the managed count after the lowmem_reserve arrays are initialized at boot. This means the lowmem_reserve values at boot may be lower than the values used later if /proc/sys/vm/lowmem_reserve_ratio is accessed even if the ratio values are unchanged. In many cases the difference is not significant, but for example an ARM platform with 1GB of memory and the following memory layout cma: Reserved 256 MiB at 0x0000000030000000 Zone ranges: DMA [mem 0x0000000000000000-0x000000002fffffff] Normal empty HighMem [mem 0x0000000030000000-0x000000003fffffff] would result in 0 lowmem_reserve for the DMA zone. This would allow userspace to deplete the DMA zone easily. Funnily enough $ cat /proc/sys/vm/lowmem_reserve_ratio would fix up the situation because as a side effect it forces setup_per_zone_lowmem_reserve. This commit breaks the link order dependency by invoking init_per_zone_wmark_min() as a postcore_initcall so that the CMA pages have the chance to be properly accounted in their zone(s) and allowing the lowmem_reserve arrays to receive consistent values. Fixes: bc22af74 ("mm: update min_free_kbytes from khugepaged after core initialization") Signed-off-by:Doug Berger <opendmb@gmail.com> Signed-off-by:
-
Phillip Lougher authored
This is a regression introduced by the patch "migrate from ll_rw_block usage to BIO". Bio_alloc() is limited to 256 pages (1 Mbyte). This can cause a failure when reading 1 Mbyte block filesystems. The problem is a datablock can be fully (or almost uncompressed), requiring 256 pages, but, because blocks are not aligned to page boundaries, it may require 257 pages to read. Bio_kmalloc() can handle 1024 pages, and so use this for the edge condition. Fixes: 93e72b3c ("squashfs: migrate from ll_rw_block usage to BIO") Reported-by:
Nicolas Prochazka <nicolas.prochazka@gmail.com> Reported-by:
Tomoatsu Shimada <shimada@walbrix.com> Signed-off-by:
Phillip Lougher <phillip@squashfs.org.uk> Signed-off-by:
Guenter Roeck <groeck@chromium.org> Cc: Philippe Liard <pliard@google.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Adrien Schildknecht <adrien+dev@schischi.me> Cc: Daniel Rosenberg <drosen@google.com> Cc: <stable@vger.kernel.org> Link: http://lkml.kernel.org/r/20200815035637.15319-1-phillip@squashfs.org.uk Signed-off-by:
-
Hugh Dickins authored
syzbot crashed on the VM_BUG_ON_PAGE(PageTail) in munlock_vma_page(), when called from uprobes __replace_page(). Which of many ways to fix it? Settled on not calling when PageCompound (since Head and Tail are equals in this context, PageCompound the usual check in uprobes.c, and the prior use of FOLL_SPLIT_PMD will have cleared PageMlocked already). Fixes: 5a52c9df ("uprobe: use FOLL_SPLIT_PMD instead of FOLL_SPLIT") Reported-by:
syzbot <syzkaller@googlegroups.com> Signed-off-by:
Hugh Dickins <hughd@google.com> Signed-off-by:
Srikar Dronamraju <srikar@linux.vnet.ibm.com> Acked-by:
Song Liu <songliubraving@fb.com> Acked-by:
Oleg Nesterov <oleg@redhat.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: <stable@vger.kernel.org> [5.4+] Link: http://lkml.kernel.org/r/alpine.LSU.2.11.2008161338360.20413@eggly.anvils Signed-off-by:
-
Wei Yongjun authored
kmemleak report memory leak as follows: unreferenced object 0x607ee4e5f948 (size 8): comm "syz-executor.1", pid 2098, jiffies 4295031601 (age 288.468s) hex dump (first 8 bytes): 00 00 00 00 00 00 00 00 ........ backtrace: relay_open kernel/relay.c:583 [inline] relay_open+0xb6/0x970 kernel/relay.c:563 do_blk_trace_setup+0x4a8/0xb20 kernel/trace/blktrace.c:557 __blk_trace_setup+0xb6/0x150 kernel/trace/blktrace.c:597 blk_trace_ioctl+0x146/0x280 kernel/trace/blktrace.c:738 blkdev_ioctl+0xb2/0x6a0 block/ioctl.c:613 block_ioctl+0xe5/0x120 fs/block_dev.c:1871 vfs_ioctl fs/ioctl.c:48 [inline] __do_sys_ioctl fs/ioctl.c:753 [inline] __se_sys_ioctl fs/ioctl.c:739 [inline] __x64_sys_ioctl+0x170/0x1ce fs/ioctl.c:739 do_syscall_64+0x33/0x40 arch/x86/entry/common.c:46 entry_SYSCALL_64_after_hwframe+0x44/0xa9 'chan->buf' is malloced in relay_open() by alloc_percpu() but not free while destroy the relay channel. Fix it by adding free_percpu() before return from relay_destroy_channel(). Fixes: 017c59c0 ("relay: Use per CPU constructs for the relay channel buffer pointers") Reported-by:Hulk Robot <hulkci@huawei.com> Signed-off-by:
Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by:
Chris Wilson <chris@chris-wilson.co.uk> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: David Rientjes <rientjes@google.com> Cc: Michel Lespinasse <walken@google.com> Cc: Daniel Axtens <dja@axtens.net> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Akash Goel <akash.goel@intel.com> Cc: <stable@vger.kernel.org> Link: http://lkml.kernel.org/r/20200817122826.48518-1-weiyongjun1@huawei.com Signed-off-by:
-
Jann Horn authored
romfs has a superblock field that limits the size of the filesystem; data beyond that limit is never accessed. romfs_dev_read() fetches a caller-supplied number of bytes from the backing device. It returns 0 on success or an error code on failure; therefore, its API can't represent short reads, it's all-or-nothing. However, when romfs_dev_read() detects that the requested operation would cross the filesystem size limit, it currently silently truncates the requested number of bytes. This e.g. means that when the content of a file with size 0x1000 starts one byte before the filesystem size limit, ->readpage() will only fill a single byte of the supplied page while leaving the rest uninitialized, leaking that uninitialized memory to userspace. Fix it by returning an error code instead of truncating the read when the requested read operation would go beyond the end of the filesystem. Fixes: da4458bd ("NOMMU: Make it possible for RomFS to use MTD devices directly") Signed-off-by:
Jann Horn <jannh@google.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: David Howells <dhowells@redhat.com> Cc: <stable@vger.kernel.org> Link: http://lkml.kernel.org/r/20200818013202.2246365-1-jannh@google.com Signed-off-by:
-
Leon Romanovsky authored
The compilation with CONFIG_DEBUG_RODATA_TEST set produces the following warning due to the missing include. mm/rodata_test.c:15:6: warning: no previous prototype for 'rodata_test' [-Wmissing-prototypes] 15 | void rodata_test(void) | ^~~~~~~~~~~ Fixes: 2959a5f7 ("mm: add arch-independent testcases for RODATA") Signed-off-by:Leon Romanovsky <leonro@nvidia.com> Signed-off-by:
Anshuman Khandual <anshuman.khandual@arm.com> Link: https://lkml.kernel.org/r/20200819080026.918134-1-leon@kernel.org Signed-off-by:
-
Aneesh Kumar K.V authored
Like zap_pte_range add cond_resched so that we can avoid softlockups as reported below. On non-preemptible kernel with large I/O map region (like the one we get when using persistent memory with sector mode), an unmap of the namespace can report below softlockups. 22724.027334] watchdog: BUG: soft lockup - CPU#49 stuck for 23s! [ndctl:50777] NIP [c0000000000dc224] plpar_hcall+0x38/0x58 LR [c0000000000d8898] pSeries_lpar_hpte_invalidate+0x68/0xb0 Call Trace: flush_hash_page+0x114/0x200 hpte_need_flush+0x2dc/0x540 vunmap_page_range+0x538/0x6f0 free_unmap_vmap_area+0x30/0x70 remove_vm_area+0xfc/0x140 __vunmap+0x68/0x270 __iounmap.part.0+0x34/0x60 memunmap+0x54/0x70 release_nodes+0x28c/0x300 device_release_driver_internal+0x16c/0x280 unbind_store+0x124/0x170 drv_attr_store+0x44/0x60 sysfs_kf_write+0x64/0x90 kernfs_fop_write+0x1b0/0x290 __vfs_write+0x3c/0x70 vfs_write+0xd8/0x260 ksys_write+0xdc/0x130 system_call+0x5c/0x70 Reported-by:Harish Sriram <harish@linux.ibm.com> Signed-off-by:
Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Signed-off-by:
-
Hugh Dickins authored
syzbot crashes on the VM_BUG_ON_MM(khugepaged_test_exit(mm), mm) in __khugepaged_enter(): yes, when one thread is about to dump core, has set core_state, and is waiting for others, another might do something calling __khugepaged_enter(), which now crashes because I lumped the core_state test (known as "mmget_still_valid") into khugepaged_test_exit(). I still think it's best to lump them together, so just in this exceptional case, check mm->mm_users directly instead of khugepaged_test_exit(). Fixes: bbe98f9c ("khugepaged: khugepaged_test_exit() check mmget_still_valid()") Reported-by:
Yang Shi <shy828301@gmail.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Song Liu <songliubraving@fb.com> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Eric Dumazet <edumazet@google.com> Cc: <stable@vger.kernel.org> [4.8+] Link: http://lkml.kernel.org/r/alpine.LSU.2.11.2008141503370.18085@eggly.anvils Signed-off-by:
-
Xu Wang authored
Replace a comma between expression statements by a semicolon. Fixes: faced7e0 ("mm: hugetlb controller for cgroups v2") Signed-off-by:
Xu Wang <vulab@iscas.ac.cn> Signed-off-by:
-
Nick Desaulniers authored
I keep getting bounce back from the suse.de address. Signed-off-by:
Nick Desaulniers <ndesaulniers@google.com> Signed-off-by:
-
- Aug 20, 2020
-
-
git://github.com/awilliam/linux-vfioLinus Torvalds authored
Pull VFIO fixes from Alex Williamson: - Fix lockdep issue reported for recursive read-lock (Alex Williamson) - Fix missing unwind in type1 replay function (Alex Williamson) * tag 'vfio-v5.9-rc2' of git://github.com/awilliam/linux-vfio: vfio/type1: Add proper error unwind for vfio_iommu_replay() vfio-pci: Avoid recursive read-lock usage
-
Arvind Sankar authored
gcc can transform the loop in a naive implementation of memset/memcpy etc into a call to the function itself. This optimization is enabled by -ftree-loop-distribute-patterns. This has been the case for a while, but gcc-10.x enables this option at -O2 rather than -O3 as in previous versions. Add -ffreestanding, which implicitly disables this optimization with gcc. It is unclear whether clang performs such optimizations, but hopefully it will also not do so in a freestanding environment. Signed-off-by:
Arvind Sankar <nivedita@alum.mit.edu> Link: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=56888 Signed-off-by:
-
Arvind Sankar authored
Since commits c041b5ad ("x86, boot: Create a separate string.h file to provide standard string functions") fb4cac57 ("x86, boot: Move memcmp() into string.h and string.c") the decompressor stub has been using the compiler's builtin memcpy, memset and memcmp functions, _except_ where it would likely have the largest impact, in the decompression code itself. Remove the #undef's of memcpy and memset in misc.c so that the decompressor code also uses the compiler builtins. The rationale given in the comment doesn't really apply: just because some functions use the out-of-line version is no reason to not use the builtin version in the rest. Replace the comment with an explanation of why memzero and memmove are being #define'd. Drop the suggestion to #undef in boot/string.h as well: the out-of-line versions are not really optimized versions, they're generic code that's good enough for the preboot environment. The compiler will likely generate better code for constant-size memcpy/memset/memcmp if it is allowed to. Most decompressors' performance is unchanged, with the exception of LZ4 and 64-bit ZSTD. Before After ARCH LZ4 73ms 10ms 32 LZ4 120ms 10ms 64 ZSTD 90ms 74ms 64 Measurements on QEMU on 2.2GHz Broadwell Xeon, using defconfig kernels. Decompressor code size has small differences, with the largest being that 64-bit ZSTD decreases just over 2k. The largest code size increase was on 64-bit XZ, of about 400 bytes. Signed-off-by:
Nick Terrell <nickrterrell@gmail.com> Tested-by:
Kees Cook <keescook@chromium.org> Signed-off-by:
-
- Aug 19, 2020
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spiLinus Torvalds authored
Pull spi fixes from Mark Brown: "A bunch of fixes that came in for SPI during the merge window. Some from ST and others for their controller, one from Lukas for a race between device addition and controller unregistration and one from fix from Geert for the DT bindings which unbreaks validation" * tag 'spi-fix-v5.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: dt-bindings: lpspi: Add missing boolean type for fsl,spi-only-use-cs1-sel spi: stm32: always perform registers configuration prior to transfer spi: stm32: fixes suspend/resume management spi: stm32: fix stm32_spi_prepare_mbr in case of odd clk_rate spi: stm32: fix fifo threshold level in case of short transfer spi: stm32h7: fix race condition at end of transfer spi: stm32: clear only asserted irq flags on interrupt spi: Prevent adding devices below an unregistering controller
-
git://git.kernel.org/pub/scm/linux/kernel/git/rppt/memblockLinus Torvalds authored
Pull ia64 page table fix from Mike Rapoport: "Fix regression in IA-64 caused by page table allocation refactoring The refactoring and consolidation of <asm/pgalloc.h> caused regression on parisc and ia64. The fix for parisc made it into v5.9-rc1 while the fix ia64 got delayed a bit and here it is" * tag 'fixes-2020-08-18' of git://git.kernel.org/pub/scm/linux/kernel/git/rppt/memblock: arch/ia64: Restore arch-specific pgd_offset_k implementation
-
Yang Shi authored
Recently we found regression when running will_it_scale/page_fault3 test on ARM64. Over 70% down for the multi processes cases and over 20% down for the multi threads cases. It turns out the regression is caused by commit 89b15332 ("mm: drop mmap_sem before calling balance_dirty_pages() in write fault"). The test mmaps a memory size file then write to the mapping, this would make all memory dirty and trigger dirty pages throttle, that upstream commit would release mmap_sem then retry the page fault. The retried page fault would see correct PTEs installed then just fall through to spurious TLB flush. The regression is caused by the excessive spurious TLB flush. It is fine on x86 since x86's spurious TLB flush is no-op. We could just skip the spurious TLB flush to mitigate the regression. Suggested-by:
Xu Yu <xuyu@linux.alibaba.com> Debugged-by:
-
- Aug 18, 2020
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linuxLinus Torvalds authored
Pull mailmap update from Kees Cook: "This was originally part of my pstore tree, but when I realized that mailmap needed re-alphabetizing, I decided to wait until -rc1 to send this, as I saw a lot of mailmap additions pending in -next for the merge window. It's a programmatic reordering and the addition of a pstore contributor's preferred email address" * tag 'pstore-v5.9-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: mailmap: Add WeiXiong Liao mailmap: Restore dictionary sorting
-
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netLinus Torvalds authored
Pull networking fixes from David Miller: "Another batch of fixes: 1) Remove nft_compat counter flush optimization, it generates warnings from the refcount infrastructure. From Florian Westphal. 2) Fix BPF to search for build id more robustly, from Jiri Olsa. 3) Handle bogus getopt lengths in ebtables, from Florian Westphal. 4) Infoleak and other fixes to j1939 CAN driver, from Eric Dumazet and Oleksij Rempel. 5) Reset iter properly on mptcp sendmsg() error, from Florian Westphal. 6) Show a saner speed in bonding broadcast mode, from Jarod Wilson. 7) Various kerneldoc fixes in bonding and elsewhere, from Lee Jones. 8) Fix double unregister in bonding during namespace tear down, from Cong Wang. 9) Disable RP filter during icmp_redirect selftest, from David Ahern" * git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (75 commits) otx2_common: Use devm_kcalloc() in otx2_config_npa() net: qrtr: fix usage of idr in port assignment to socket selftests: disable rp_filter for icmp_redirect.sh Revert "net: xdp: pull ethernet header off packet after computing skb->protocol" phylink: <linux/phylink.h>: fix function prototype kernel-doc warning mptcp: sendmsg: reset iter on error redux net: devlink: Remove overzealous WARN_ON with snapshots tipc: not enable tipc when ipv6 works as a module tipc: fix uninit skb->data in tipc_nl_compat_dumpit() net: Fix potential wrong skb->protocol in skb_vlan_untag() net: xdp: pull ethernet header off packet after computing skb->protocol ipvlan: fix device features bonding: fix a potential double-unregister can: j1939: add rxtimer for multipacket broadcast session can: j1939: abort multipacket broadcast session when timeout occurs can: j1939: cancel rxtimer on multipacket broadcast session complete can: j1939: fix support for multipacket broadcast message net: fddi: skfp: cfm: Remove seemingly unused variable 'ID_sccs' net: fddi: skfp: cfm: Remove set but unused variable 'oldstate' net: fddi: skfp: smt: Remove seemingly unused variable 'ID_sccs' ... -
Xu Wang authored
A multiplication for the size determination of a memory allocation indicated that an array data structure should be processed. Thus use the corresponding function "devm_kcalloc". Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Necip Fazil Yildiran authored
Passing large uint32 sockaddr_qrtr.port numbers for port allocation triggers a warning within idr_alloc() since the port number is cast to int, and thus interpreted as a negative number. This leads to the rejection of such valid port numbers in qrtr_port_assign() as idr_alloc() fails. To avoid the problem, switch to idr_alloc_u32() instead. Fixes: bdabad3e ("net: Add Qualcomm IPC router") Reported-by:
<syzbot+f31428628ef672716ea8@syzkaller.appspotmail.com> Signed-off-by:
Necip Fazil Yildiran <necip@google.com> Reviewed-by:
Dmitry Vyukov <dvyukov@google.com> Signed-off-by:
-
David Ahern authored
h1 is initially configured to reach h2 via r1 rather than the more direct path through r2. If rp_filter is set and inherited for r2, forwarding fails since the source address of h1 is reachable from eth0 vs the packet coming to it via r1 and eth1. Since rp_filter setting affects the test, explicitly reset it. Signed-off-by:
David Ahern <dsahern@kernel.org> Signed-off-by:
-
Kees Cook authored
WeiXiong Liao noted to me offlist that his preference for email address had changed and that he'd like it updated in the mailmap so people discussing pstore/blk would be able to reach him. Cc: WeiXiong Liao <gmpy.liaowx@gmail.com> Signed-off-by: -
Kees Cook authored
Several names had been recently appended (instead of inserted). While git-shortlog doesn't need this file to be sorted, it helps humans to keep it organized this way. Sort the entire file (which includes some minor shuffling for dictionary order). Done with the following commands: grep -E '^(#|$)' .mailmap > .mailmap.head grep -Ev '^(#|$)' .mailmap > .mailmap.body sort -f .mailmap.body > .mailmap.body.sort cat .mailmap.head .mailmap.body.sort > .mailmap rm .mailmap.head .mailmap.body.sort Signed-off-by: -
Jessica Clarke authored
IA-64 is special and treats pgd_offset_k() differently to pgd_offset(), using different formulae to calculate the indices into the kernel and user PGDs. The index into the user PGDs takes into account the region number, but the index into the kernel (init_mm) PGD always assumes a predefined kernel region number. Commit 974b9b2c ("mm: consolidate pte_index() and pte_offset_*() definitions") made IA-64 use a generic pgd_offset_k() which incorrectly used pgd_index() for kernel page tables. As a result, the index into the kernel PGD was going out of bounds and the kernel hung during early boot. Allow overrides of pgd_offset_k() and override it on IA-64 with the old implementation that will correctly index the kernel PGD. Fixes: 974b9b2c ("mm: consolidate pte_index() and pte_offset_*() definitions") Reported-by:
John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de> Signed-off-by:
Jessica Clarke <jrtc27@jrtc27.com> Tested-by:
Tony Luck <tony.luck@intel.com> Signed-off-by:
Mike Rapoport <rppt@linux.ibm.com>
-
David S. Miller authored
This reverts commit f8414a8d . eth_type_trans() does the necessary pull on the skb. Signed-off-by:
-
Randy Dunlap authored
Fix a kernel-doc warning for the pcs_config() function prototype: ../include/linux/phylink.h:406: warning: Excess function parameter 'permit_pause_to_mac' description in 'pcs_config' Fixes: 7137e18f ("net: phylink: add struct phylink_pcs") Signed-off-by:
Randy Dunlap <rdunlap@infradead.org> Cc: Russell King <linux@armlinux.org.uk> Cc: David S. Miller <davem@davemloft.net> Cc: netdev@vger.kernel.org Signed-off-by:
-
Alex Williamson authored
The vfio_iommu_replay() function does not currently unwind on error, yet it does pin pages, perform IOMMU mapping, and modify the vfio_dma structure to indicate IOMMU mapping. The IOMMU mappings are torn down when the domain is destroyed, but the other actions go on to cause trouble later. For example, the iommu->domain_list can be empty if we only have a non-IOMMU backed mdev attached. We don't currently check if the list is empty before getting the first entry in the list, which leads to a bogus domain pointer. If a vfio_dma entry is erroneously marked as iommu_mapped, we'll attempt to use that bogus pointer to retrieve the existing physical page addresses. This is the scenario that uncovered this issue, attempting to hot-add a vfio-pci device to a container with an existing mdev device and DMA mappings, one of which could not be pinned, causing a failure adding the new group to the existing container and setting the conditions for a subsequent attempt to explode. To resolve this, we can first check if the domain_list is empty so that we can reject replay of a bogus domain, should we ever encounter this inconsistent state again in the future. The real fix though is to add the necessary unwind support, which means cleaning up the current pinning if an IOMMU mapping fails, then walking back through the r-b tree of DMA entries, reading from the IOMMU which ranges are mapped, and unmapping and unpinning those ranges. To be able to do this, we also defer marking the DMA entry as IOMMU mapped until all entries are processed, in order to allow the unwind to know the disposition of each entry. Fixes: a54eb550 ("vfio iommu type1: Add support for mediated devices") Reported-by:
Zhiyi Guo <zhguo@redhat.com> Tested-by:
Cornelia Huck <cohuck@redhat.com> Signed-off-by:
Alex Williamson <alex.williamson@redhat.com>
-
Alex Williamson authored
A down_read on memory_lock is held when performing read/write accesses to MMIO BAR space, including across the copy_to/from_user() callouts which may fault. If the user buffer for these copies resides in an mmap of device MMIO space, the mmap fault handler will acquire a recursive read-lock on memory_lock. Avoid this by reducing the lock granularity. Sequential accesses requiring multiple ioread/iowrite cycles are expected to be rare, therefore typical accesses should not see additional overhead. VGA MMIO accesses are expected to be non-fatal regardless of the PCI memory enable bit to allow legacy probing, this behavior remains with a comment added. ioeventfds are now included in memory access testing, with writes dropped while memory space is disabled. Fixes: abafbc55 ("vfio-pci: Invalidate mmaps and block MMIO access on disabled memory") Reported-by:
-
David Howells authored
Impose a limit on the number of watches that a user can hold so that they can't use this mechanism to fill up all the available memory. This is done by putting a counter in user_struct that's incremented when a watch is allocated and decreased when it is released. If the number exceeds the RLIMIT_NOFILE limit, the watch is rejected with EAGAIN. This can be tested by the following means: (1) Create a watch queue and attach it to fd 5 in the program given - in this case, bash: keyctl watch_session /tmp/nlog /tmp/gclog 5 bash (2) In the shell, set the maximum number of files to, say, 99: ulimit -n 99 (3) Add 200 keyrings: for ((i=0; i<200; i++)); do keyctl newring a$i @s || break; done (4) Try to watch all of the keyrings: for ((i=0; i<200; i++)); do echo $i; keyctl watch_add 5 %:a$i || break; done This should fail when the number of watches belonging to the user hits 99. (5) Remove all the keyrings and all of those watches should go away: for ((i=0; i<200; i++)); do keyctl unlink %:a$i; done (6) Kill off the watch queue by exiting the shell spawned by watch_session. Fixes: c73be61c ("pipe: Add general notification queue support") Reported-by:David Howells <dhowells@redhat.com> Reviewed-by:
Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by:
-
- Aug 17, 2020
-
-
Florian Westphal authored
This fix wasn't correct: When this function is invoked from the retransmission worker, the iterator contains garbage and resetting it causes a crash. As the work queue should not be performance critical also zero the msghdr struct. Fixes: 35759383 "(mptcp: sendmsg: reset iter on error)" Signed-off-by:
Florian Westphal <fw@strlen.de> Signed-off-by:
-
Andrew Lunn authored
It is possible to trigger this WARN_ON from user space by triggering a devlink snapshot with an ID which already exists. We don't need both -EEXISTS being reported and spamming the kernel log. Signed-off-by:
Andrew Lunn <andrew@lunn.ch> Tested-by:
Chris Healy <cphealy@gmail.com> Signed-off-by:
-
Xin Long authored
When using ipv6_dev_find() in one module, it requires ipv6 not to work as a module. Otherwise, this error occurs in build: undefined reference to `ipv6_dev_find'. So fix it by adding "depends on IPV6 || IPV6=n" to tipc/Kconfig, as it does in sctp/Kconfig. Fixes: 5a6f6f57 ("tipc: set ub->ifindex for local ipv6 address") Reported-by:
kernel test robot <lkp@intel.com> Acked-by:
Xin Long <lucien.xin@gmail.com> Signed-off-by:
-
Cong Wang authored
__tipc_nl_compat_dumpit() has two callers, and it expects them to pass a valid nlmsghdr via arg->data. This header is artificial and crafted just for __tipc_nl_compat_dumpit(). tipc_nl_compat_publ_dump() does so by putting a genlmsghdr as well as some nested attribute, TIPC_NLA_SOCK. But the other caller tipc_nl_compat_dumpit() does not, this leaves arg->data uninitialized on this call path. Fix this by just adding a similar nlmsghdr without any payload in tipc_nl_compat_dumpit(). This bug exists since day 1, but the recent commit 6ea67769 ("net: tipc: prepare attrs in __tipc_nl_compat_dumpit()") makes it easier to appear. Reported-and-tested-by:
<syzbot+0e7181deafa7e0b79923@syzkaller.appspotmail.com> Fixes: d0796d1e ("tipc: convert legacy nl bearer dump to nl compat") Cc: Jon Maloy <jmaloy@redhat.com> Cc: Ying Xue <ying.xue@windriver.com> Cc: Richard Alpe <richard.alpe@ericsson.com> Signed-off-by:
Cong Wang <xiyou.wangcong@gmail.com> Acked-by:
Ying Xue <ying.xue@windriver.com> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nfDavid S. Miller authored
Pablo Neira Ayuso says: ==================== Netfilter fixes for net The following patchset contains Netfilter fixes for net: 1) Endianness issue in IPv4 option support in nft_exthdr, from Stephen Suryaputra. 2) Removes the waitcount optimization in nft_compat, from Florian Westphal. 3) Remove ipv6 -> nf_defrag_ipv6 module dependency, from Florian Westphal. 4) Memleak in chain binding support, also from Florian. 5) Simplify nft_flowtable.sh selftest, from Fabian Frederick. 6) Optional MTU arguments for selftest nft_flowtable.sh, also from Fabian. 7) Remove noise error report when killing process in selftest nft_flowtable.sh, from Fabian Frederick. 8) Reject bogus getsockopt option length in ebtables, from Florian Westphal. ==================== Signed-off-by: -
David S. Miller authored
Merge tag 'linux-can-fixes-for-5.9-20200815' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can Marc Kleine-Budde says: ==================== pull-request: can 2020-08-15 this is a pull request of 4 patches for net/master. All patches are by Zhang Changzhong and fix broadcast related problems in the j1939 CAN networking stack. ==================== Signed-off-by:
-
Miaohe Lin authored
We may access the two bytes after vlan_hdr in vlan_set_encap_proto(). So we should pull VLAN_HLEN + sizeof(unsigned short) in skb_vlan_untag() or we may access the wrong data. Fixes: 0d5501c1 ("net: Always untag vlan-tagged traffic on input.") Signed-off-by:
Miaohe Lin <linmiaohe@huawei.com> Signed-off-by:
-
Jason A. Donenfeld authored
When an XDP program changes the ethernet header protocol field, eth_type_trans is used to recalculate skb->protocol. In order for eth_type_trans to work correctly, the ethernet header must actually be part of the skb data segment, so the code first pushes that onto the head of the skb. However, it subsequently forgets to pull it back off, making the behavior of the passed-on packet inconsistent between the protocol modifying case and the static protocol case. This patch fixes the issue by simply pulling the ethernet header back off of the skb head. Fixes: 29724956 ("net: fix generic XDP to handle if eth header was mangled") Cc: Jesper Dangaard Brouer <brouer@redhat.com> Cc: David S. Miller <davem@davemloft.net> Signed-off-by:
Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by:
-
Mahesh Bandewar authored
Processing NETDEV_FEAT_CHANGE causes IPvlan links to lose NETIF_F_LLTX feature because of the incorrect handling of features in ipvlan_fix_features(). --before-- lpaa10:~# ethtool -k ipvl0 | grep tx-lockless tx-lockless: on [fixed] lpaa10:~# ethtool -K ipvl0 tso off Cannot change tcp-segmentation-offload Actual changes: vlan-challenged: off [fixed] tx-lockless: off [fixed] lpaa10:~# ethtool -k ipvl0 | grep tx-lockless tx-lockless: off [fixed] lpaa10:~# --after-- lpaa10:~# ethtool -k ipvl0 | grep tx-lockless tx-lockless: on [fixed] lpaa10:~# ethtool -K ipvl0 tso off Cannot change tcp-segmentation-offload Could not change any device features lpaa10:~# ethtool -k ipvl0 | grep tx-lockless tx-lockless: on [fixed] lpaa10:~# Fixes: 2ad7bf36 ("ipvlan: Initial check-in of the IPVLAN driver.") Signed-off-by:
Mahesh Bandewar <maheshb@google.com> Cc: Eric Dumazet <edumazet@google.com> Signed-off-by:
-
Cong Wang authored
When we tear down a network namespace, we unregister all the netdevices within it. So we may queue a slave device and a bonding device together in the same unregister queue. If the only slave device is non-ethernet, it would automatically unregister the bonding device as well. Thus, we may end up unregistering the bonding device twice. Workaround this special case by checking reg_state. Fixes: 9b5e383c ("net: Introduce unregister_netdevice_many()") Reported-by:
<syzbot+af23e7f3e0a7e10c8b67@syzkaller.appspotmail.com> Cc: Eric Dumazet <eric.dumazet@gmail.com> Cc: Andy Gospodarek <andy@greyhouse.net> Cc: Jay Vosburgh <j.vosburgh@gmail.com> Signed-off-by:
-
