- Dec 02, 2018
-
-
Lorenzo Bianconi authored
Add entry for hts221 temperature/humidity driver in MAINTAINERS file Signed-off-by:
Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by:
Jonathan Cameron <Jonathan.Cameron@huawei.com>
-
Stephan Gerhold authored
This HID is used on the ASUS MeMO Pad 7 (ME176C) tablet. Signed-off-by:
Stephan Gerhold <stephan@gerhold.net> Signed-off-by:
-
- Dec 01, 2018
-
-
Matheus Tavares authored
Move ad2s90 resolver driver out of staging to the main tree. Signed-off-by:
Matheus Tavares <matheus.bernardino@usp.br> Signed-off-by:
Victor Colombo <victorcolombo@gmail.com> Acked-by:
Alexandru Ardelean <alexandru.ardelean@analog.com> Signed-off-by:
-
Victor Colombo authored
Fix the checkpatch.pl issue: "CHECK: struct mutex definition without comment". Signed-off-by:
-
Matheus Tavares authored
This patch removes the license boilerplate text at the top of ad2s90.c and, instead, adds the SPDX GPL-2.0 license identifier, which solves the checkpatch.pl warning: "WARNING: Missing or malformed SPDX-License-Identifier tag in line 1". Signed-off-by:
-
Matheus Tavares authored
This patch adds the device tree binding documentation for the ad2s90 resolver-to-digital converter. Signed-off-by:
Rob Herring <robh@kernel.org> Acked-by:
-
Alexandru Ardelean authored
This patch adds a max frequency check at the beginning of ad2s90_probe function so that when it is set to a value above 0.83Mhz, dev_err is called with an appropriate message and -EINVAL is returned. The defined limit is 0.83Mhz instead of 2Mhz, which is the chip's max frequency as specified in the datasheet, because, as also specified in the datasheet, a 600ns delay is expected between the application of a logic LO to CS and the application of SCLK. Since the delay is not implemented in the spi code, to satisfy it, SCLK's period should be at most 2 * 600ns, so the max frequency should be 1 / (2 * 6e-7), which gives roughly 830000Hz. Signed-off-by:
-
Matheus Tavares authored
The ad2s90 driver currently sets some spi settings (max_speed_hz and mode) at ad2s90_probe. Since the maximum frequency is a required element in DT binding for spi slave devices and because the spi mode for the device can be either (0,0) or (1,1), these settings should be handled via device tree, not in the driver's code. This patch removes them from the probe function. Note: The way in which the mentioned spi settings need to be specified on the ad2s90's node of a device tree will be documented in the future patch "dt-bindings:iio:resolver: Add docs for ad2s90". Signed-off-by:
-
Matheus Tavares authored
This patch adds device tree support to ad2s90 with standard device tree id table. Signed-off-by:
-
- Nov 25, 2018
-
-
Lorenzo Bianconi authored
Generalize st_lsm6dsx_shub_read_oneshot in order to not use a fixed read length and take into account iio channel realbits for single read operations Signed-off-by:
-
Colin Ian King authored
The statement is indented too much by one level, fix this by removing the extraneous tab. Signed-off-by:
Colin Ian King <colin.king@canonical.com> Signed-off-by:
-
Fabrice Gasnier authored
Switch off ADC when going to low power mode, in case it has been left running in buffer mode. Then re-enable it when resuming. Signed-off-by:
Fabrice Gasnier <fabrice.gasnier@st.com> Signed-off-by:
-
Fabrice Gasnier authored
Add support for runtime PM & sleep. Move all regulator and clock management to dedicated HW start/stop routines. Then rely on (runtime) PM OPS to call them. Signed-off-by:
-
Fabrice Gasnier authored
Move self-calibration routine to prepare routine. - This is precursor patch to ease power management handling. - This also allow to factorize few error cases (error handling). Signed-off-by:
-
Hans de Goede authored
Various 2-in-1's use KIOX010A and KIOX020A as HIDs for 2 KXCJ91008 accelerometers. The KIOX010A HID is for the one in the base and the KIOX020A for the accelerometer in the keyboard. Since userspace does not have a way yet to deal with (or ignore) the accelerometer in the keyboard, this commit just adds the KIOX010A HID for now so that display rotation will work. Related: https://github.com/hadess/iio-sensor-proxy/issues/166 Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Signed-off-by:
-
Chris Coffey authored
This patch adds driver support for the Microchip MCP41xxx/42xxx family of digital potentiometers: DEVICE Wipers Positions Resistance (kOhm) MCP41010 1 256 10 MCP41050 1 256 50 MCP41100 1 256 100 MCP42010 2 256 10 MCP42050 2 256 50 MCP42100 2 256 100 Datasheet: http://ww1.microchip.com/downloads/en/devicedoc/11195c.pdf Signed-off-by:
Chris Coffey <cmc@babblebit.net> Signed-off-by:
-
Chris Coffey authored
This patch adds device tree documentation for the Microchip MCP41xxx/42xxx family of digital potentiometers. Signed-off-by:
-
Shreeya Patel authored
Most of the drivers in IIO uses irq_type as the name for storing the interrupt type and hence change the name from irq_flags to irq_type for maintaining the consistency. Signed-off-by:
Shreeya Patel <shreeya.patel23498@gmail.com> Signed-off-by:
-
Shreeya Patel authored
There is no need to store irq_flags into the structure as it is always set to the same thing. Hence switch irq_flags to a local variable. Signed-off-by:
-
Shreeya Patel authored
Make the driver use device tree instead of the platform data. Hence, use devm_gpiod_get_optional function to get the data from device tree for ldac-pin and accordingly make the needed changes in the driver. Signed-off-by:
-
Shreeya Patel authored
When the kernel starts up, it kicks off compiled-in drivers that match “compatible” entries it finds in the device tree. At a later stage (when /lib/modules is available), all kernel modules that match “compatible” entries in the device tree are loaded. But if there is no dt table then there should be a fall back path with which desired kernel modules can be loaded. Hence, add of_device_id table in the i2c driver to be able to use when there is no dt table. Signed-off-by:
-
Martin Blumenstingl authored
Before this patch we are registering the internal clocks (for example on Meson8b, where the SAR ADC IP block implements the divider and gate clocks) with the following names: - /soc/cbus@c1100000/adc@8680#adc_div - /soc/cbus@c1100000/adc@8680#adc_en This is bad because the common clock framework uses the clock to create a directory in <debugfs>/clk. With such name, the directory creation (silently) fails and the debugfs entry ends up being created at the debugfs root. With this change, the new clock names are: - c1108680.adc#adc_div - c1108680.adc#adc_en This matches the clock naming scheme used in the PWM, Ethernet and MMC drivers. It also fixes the problem with debugfs. The idea is shamelessly taken from commit b96e9eb6 ("pwm: meson: Fix mux clock names"). Fixes: 3921db46 ("iio: Convert to using %pOF instead of full_name") Signed-off-by:
Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by:
-
Nicholas Mc Guire authored
devm_kasprintf() may return NULL on failure of internal allocation thus the assignments to init.name are not safe if not checked. On error meson_sar_adc_clk_init() returns negative values so -ENOMEM in the (unlikely) failure case of devm_kasprintf() should be fine here. Signed-off-by:
Nicholas Mc Guire <hofrat@osadl.org> Fixes: 3adbf342 ("iio: adc: add a driver for the SAR ADC found in Amlogic Meson SoCs") Acked-by:
-
Marcelo Schmitt authored
Add a of_device_id struct variable and subsequent call to MODULE_DEVICE_TABLE macro to complete device tree support. Signed-off-by:
Marcelo Schmitt <marcelo.schmitt1@gmail.com> Signed-off-by:
-
Stephan Gerhold authored
This HID is used on the ASUS MeMO Pad 7 (ME176C) tablet. Signed-off-by:
-
- Nov 23, 2018
-
-
Ricardo Reis Marques Silva authored
Issue found by checkpatch. CHECK: Prefer kernel type 'u32' over 'uint32_t' +static const uint32_t vbox_cursor_plane_formats[] = { CHECK: Prefer kernel type 'u32' over 'uint32_t' +static const uint32_t vbox_primary_plane_formats[] = { CHECK: Prefer kernel type 'u32' over 'uint32_t' + const uint32_t *formats; Signed-off-by:Ricardo Reis Marques Silva <ricardormsilva93@gmail.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Michael Straube authored
The local variable ret is only used to test the return value of the call to rtl8188eu_xmitframe_complete(). Use the function directly in the if test and remove the variable ret. Signed-off-by:
Michael Straube <straube.linux@gmail.com> Signed-off-by:
-
Michael Straube authored
Replace tabs with spaces and/or remove spaces in declarations to cleanup whitespace. Signed-off-by:
-
Michael Straube authored
Add spaces around '>>' and '&' to follow kernel coding style. Reported by checkpatch. Signed-off-by:
-
Michael Straube authored
Remove unnecessary parentheses in usb_ops_linux.c. Reported by checkpatch. Signed-off-by:
-
Michael Straube authored
Correct spelling mistake in a comment reported by checkpatch. checksumed -> checksummed Signed-off-by:
-
Michael Straube authored
Remove braces from single line if else statement. Reported by checkpatch. Signed-off-by:
-
Michael Straube authored
Cleanup line ending with a '(' to follow kernel coding style. Reported by checkpatch. Signed-off-by: -
Michael Straube authored
Use __func__ instead of hardcoded function names. Reported by checkpatch. Signed-off-by:
-
Gao Xiang authored
Previously, 2 members called `initial' and `cachedzone_la' are used for applying caching policy (whether the workgroup is at either end), which are hard to understand, rename them to `backmost' and `headoffset'. Reviewed-by:
Chao Yu <yuchao0@huawei.com> Signed-off-by:
Gao Xiang <gaoxiang25@huawei.com> Signed-off-by:
-
Gao Xiang authored
For the case of nr_to_read == lookahead_size, it is better to decompress asynchronously as well since no page will be needed immediately. Reviewed-by:
-
Gao Xiang authored
Let's make sure that the one registering a workgroup will also take the primary work lock at first for two reasons: 1) There's no need to introduce such a race window (and consequently overhead) between registering and locking, other tasks could break in by chance, and the race seems unnecessary (no benefit at all); 2) It's better to take the primary work when a workgroup is registered to apply the cache managed policy, for example, if some other tasks break in, it could turn into the in-place decompression rather than use as the cached decompression. Reviewed-by: -
Gao Xiang authored
`z_erofs_vle_workgroup' is heavily generated in the decompression, for example, it resets 32 bytes redundantly for 64-bit platforms even through Z_EROFS_VLE_INLINE_PAGEVECS + Z_EROFS_CLUSTER_MAX_PAGES, default 4, pages are stored in `z_erofs_vle_workgroup'. As an another example, `struct mutex' takes 72 bytes for our kirin 64-bit platforms, it's unnecessary to be reseted at first and be initialized each time. Let's avoid filling all `z_erofs_vle_workgroup' with 0 at first since most fields are reinitialized to meaningful values later, and pagevec is no need to initialized at all. Reviewed-by:
-
Gao Xiang authored
Just like other generic locks, insert a full barrier in case of memory reorder. Reviewed-by:
-
Gao Xiang authored
There are two minor issues in the current freeze interface: 1) Freeze interfaces have not related with CONFIG_DEBUG_SPINLOCK, therefore fix the incorrect conditions; 2) For SMP platforms, it should also disable preemption before doing atomic_cmpxchg in case that some high priority tasks preempt between atomic_cmpxchg and disable_preempt, then spin on the locked refcount later. Reviewed-by:
-
