Merge branch 'arm-multiplatform-cleanup' of https://git.kernel.org/pub/scm/linux/kernel/git/soc/soc into arm/soc

Now that everything except StrongARM is unified under
CONFIG_ARCH_MULTIPLATFORM, the option is rather meaningless
in its current form.

Rework the Kconfig logic to make this useful again, similar
to the way that RISC-V has CONFIG_NONPORTABLE (with the
opposite polarity), this now controls the visibility of
options that get in the way of building generic kernels,
while allowing custom kernels.

One side-effect is that 'randconfig' builds now rarely hit
strongarm machines, rather than testing them three quarters
of the time.

* 'arm-multiplatform-cleanup' of https://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
  ARM: make ARCH_MULTIPLATFORM user-visible
  ARM: fix XIP_KERNEL dependencies
  ARM: Kconfig: clean up platform selection
  ARM: simplify machdirs/platdirs handling
  ARM: remove obsolete Makefile.boot infrastructure

Merge branch 'footbridge/cleanup' of https://git.kernel.org/pub/scm/linux/kernel/git/soc/soc into arm/soc

A cleanup for the footbridge platform that came out of inspecting
the platforms during the multiplatform conversion as well as the
dma address patches.

* 'footbridge/cleanup' of https://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
  ARM: footbridge: remove custom DMA address handling
  ARM: footbridge: move isa-dma support into footbridge
  ARM: footbridge: remove leftover from personal-server
  ARM: footbridge: remove addin mode

This pull request contains Broadcom SoC MAINTAINERS file update for 6.1,
please pull the following:

- William merges the ARCH_BCM4908 with ARCH_BCMBCA entry

* tag 'arm-soc/for-6.1/maintainers' of https://github.com/Broadcom/stblinux:
  MAINTAINERS: Add BCM4908 maintainer to BCMBCA entry

Link: https://lore.kernel.org/r/20220915023044.2350782-5-f.fainelli@gmail.com


Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Footbridge is the last Arm platform that has its own
__virt_to_bus()/__bus_to_virt()/phys_to_dma()/dma_to_phys() abstraction,
but this is just a simple offset now.

For PCI devices, the offset that is programmed into the PCI bridge must
also be set in each device using dma_direct_set_offset().  As Arm does
not have a pcibios_bus_add_device() helper yet, just use a bus notifier
for this.

For the ISA DMA, drivers now pass a non-translated physical address into
set_dma_addr(), so they have to be converted back with the corresponding
isa_bus_to_virt() function and then into the correct bus address with
the offset using the isa_dma_dev.

Tested-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Since BCM4908 SoC support is merged into ARCH_BCMBCA, add BCM4908
maintainer Rafal to bcmbca maintainer list.

Signed-off-by: William Zhang <william.zhang@broadcom.com>
Link: https://lore.kernel.org/r/20220803175455.47638-9-william.zhang@broadcom.com


Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>

The dma-isa.c was shared between footbridge and shark a long time ago,
but as shark was removed, it can be made footbridge specific again.

The fb_dma bits in turn are not used at all and can be removed.

All the ISA related files are now built into the platform regardless
of CONFIG_ISA, as they just refer to on-chip devices rather than actual
ISA cards.

Reviewed-by: Christoph Hellwig <hch@lst.de>
Tested-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

The machine was removed a while ago, and the checks are
now useless.

Reviewed-by: Christoph Hellwig <hch@lst.de>
Tested-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

This does not appear to have been used in many years, we can
kill off some of the uglier code.

Among other things, it avoids a randconfig issue when both modes
are disabled:

arch/arm/mach-footbridge/common.c:149:24: error: 'ebsa285_host_io_desc' defined but not used [-Werror=unused-variable]
  149 | static struct map_desc ebsa285_host_io_desc[] __initdata = {
      |                        ^~~~~~~~~~~~~~~~~~~~
arch/arm/mach-footbridge/common.c:136:24: error: 'fb_common_io_desc' defined but not used [-Werror=unused-variable]
  136 | static struct map_desc fb_common_io_desc[] __initdata = {
      |                        ^~~~~~~~~~~~~~~~~

The recently added phys_to_dma() functions are now trivial and
could probably be removed again as a follow-up, if anyone knows
how.

Cc: Christoph Hellwig <hch@lst.de>
Tested-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Group the three NXP platforms under an ARCH_NXP menuconfig symbol to
make make selection of similar vendor SoCs visually nicer.

Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20220829173830.3567047-3-f.fainelli@gmail.com

'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

There are now multiple Broadcom SoCs supported so group them under their
own menu such that the selection is visually more appealing and we can
easily add new platforms there in the future. This allows us to move
ARCH_BRCMSTB back to its siblings.

No functional changes introduced.

Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20220829173830.3567047-2-f.fainelli@gmail.com

'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Some options like CONFIG_DEBUG_UNCOMPRESS and CONFIG_CMDLINE_FORCE are
fundamentally incompatible with portable kernels but are currently allowed
in all configurations. Other options like XIP_KERNEL are essentially
useless after the completion of the multiplatform conversion.

Repurpose the existing CONFIG_ARCH_MULTIPLATFORM option to decide
whether the resulting kernel image is meant to be portable or not,
and using this to guard all of the known incompatible options.

This is similar to how the RISC-V kernel handles the CONFIG_NONPORTABLE
option (with the opposite polarity).

A few references to CONFIG_ARCH_MULTIPLATFORM were left behind by
earlier clanups and have to be removed now up.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>

CONFIG_XIP_KERNEL does not work with any option that involves patching
the read-only kernel .text.

Since at least CONFIG_SMP_ON_UP is required in certain configurations,
flip the dependency to always allow the .text patching options but make
XIP_KERNEL have the dependency instead.

This is a prerequisite for allowing CONFIG_ARCH_MULTIPLATFORM to
be disabled.

Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Pull more hotfixes from Andrew Morton:
 "Seventeen hotfixes.  Mostly memory management things.

  Ten patches are cc:stable, addressing pre-6.0 issues"

* tag 'mm-hotfixes-stable-2022-08-28' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
  .mailmap: update Luca Ceresoli's e-mail address
  mm/mprotect: only reference swap pfn page if type match
  squashfs: don't call kmalloc in decompressors
  mm/damon/dbgfs: avoid duplicate context directory creation
  mailmap: update email address for Colin King
  asm-generic: sections: refactor memory_intersects
  bootmem: remove the vmemmap pages from kmemleak in put_page_bootmem
  ocfs2: fix freeing uninitialized resource on ocfs2_dlm_shutdown
  Revert "memcg: cleanup racy sum avoidance code"
  mm/zsmalloc: do not attempt to free IS_ERR handle
  binder_alloc: add missing mmap_lock calls when using the VMA
  mm: re-allow pinning of zero pfns (again)
  vmcoreinfo: add kallsyms_num_syms symbol
  mailmap: update Guilherme G. Piccoli's email addresses
  writeback: avoid use-after-free after removing device
  shmem: update folio if shmem_replace_page() updates the page
  mm/hugetlb: avoid corrupting page->mapping in hugetlb_mcopy_atomic_pte

Pull bitmap fixes from Yury Norov:
 "Fix the reported issues, and implements the suggested improvements,
  for the version of the cpumask tests [1] that was merged with commit
  c41e8866 ("lib/test: introduce cpumask KUnit test suite").

  These changes include fixes for the tests, and better alignment with
  the KUnit style guidelines"

* tag 'bitmap-6.0-rc3' of github.com:/norov/linux:
  lib/cpumask_kunit: add tests file to MAINTAINERS
  lib/cpumask_kunit: log mask contents
  lib/test_cpumask: follow KUnit style guidelines
  lib/test_cpumask: fix cpu_possible_mask last test
  lib/test_cpumask: drop cpu_possible_mask full test

My Bootlin address is preferred from now on.

Link: https://lkml.kernel.org/r/20220826130515.3011951-1-luca.ceresoli@bootlin.com


Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Atish Patra <atishp@atishpatra.org>
Cc: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

Yu Zhao reported a bug after the commit "mm/swap: Add swp_offset_pfn() to
fetch PFN from swap entry" added a check in swp_offset_pfn() for swap type [1]:

  kernel BUG at include/linux/swapops.h:117!
  CPU: 46 PID: 5245 Comm: EventManager_De Tainted: G S         O L 6.0.0-dbg-DEV #2
  RIP: 0010:pfn_swap_entry_to_page+0x72/0xf0
  Code: c6 48 8b 36 48 83 fe ff 74 53 48 01 d1 48 83 c1 08 48 8b 09 f6
  c1 01 75 7b 66 90 48 89 c1 48 8b 09 f6 c1 01 74 74 5d c3 eb 9e <0f> 0b
  48 ba ff ff ff ff 03 00 00 00 eb ae a9 ff 0f 00 00 75 13 48
  RSP: 0018:ffffa59e73fabb80 EFLAGS: 00010282
  RAX: 00000000ffffffe8 RBX: 0c00000000000000 RCX: ffffcd5440000000
  RDX: 1ffffffffff7a80a RSI: 0000000000000000 RDI: 0c0000000000042b
  RBP: ffffa59e73fabb80 R08: ffff9965ca6e8bb8 R09: 0000000000000000
  R10: ffffffffa5a2f62d R11: 0000030b372e9fff R12: ffff997b79db5738
  R13: 000000000000042b R14: 0c0000000000042b R15: 1ffffffffff7a80a
  FS:  00007f549d1bb700(0000) GS:ffff99d3cf680000(0000) knlGS:0000000000000000
  CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
  CR2: 0000440d035b3180 CR3: 0000002243176004 CR4: 00000000003706e0
  DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
  DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
  Call Trace:
   <TASK>
   change_pte_range+0x36e/0x880
   change_p4d_range+0x2e8/0x670
   change_protection_range+0x14e/0x2c0
   mprotect_fixup+0x1ee/0x330
   do_mprotect_pkey+0x34c/0x440
   __x64_sys_mprotect+0x1d/0x30

It triggers because pfn_swap_entry_to_page() could be called upon e.g. a
genuine swap entry.

Fix it by only calling it when it's a write migration entry where the page*
is used.

[1] https://lore.kernel.org/lkml/CAOUHufaVC2Za-p8m0aiHw6YkheDcrO-C3wRGixwDS32VTS+k1w@mail.gmail.com/

Link: https://lkml.kernel.org/r/20220823221138.45602-1-peterx@redhat.com
Fixes: 6c287605

 ("mm: remember exclusively mapped anonymous pages with PG_anon_exclusive")
Signed-off-by: Peter Xu <peterx@redhat.com>
Reported-by: Yu Zhao <yuzhao@google.com>
Tested-by: Yu Zhao <yuzhao@google.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Cc: "Huang, Ying" <ying.huang@intel.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

The decompressors may be called while in an atomic section.  So move the
kmalloc() out of this path, and into the "page actor" init function.

This fixes a regression introduced by commit
f268eedd ("squashfs: extend "page actor" to handle missing pages")

Link: https://lkml.kernel.org/r/20220822215430.15933-1-phillip@squashfs.org.uk
Fixes: f268eedd

 ("squashfs: extend "page actor" to handle missing pages")
Reported-by: Chris Murphy <lists@colorremedies.com>
Signed-off-by: Phillip Lougher <phillip@squashfs.org.uk>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

When user tries to create a DAMON context via the DAMON debugfs interface
with a name of an already existing context, the context directory creation
fails but a new context is created and added in the internal data
structure, due to absence of the directory creation success check.  As a
result, memory could leak and DAMON cannot be turned on.  An example test
case is as below:

    # cd /sys/kernel/debug/damon/
    # echo "off" >  monitor_on
    # echo paddr > target_ids
    # echo "abc" > mk_context
    # echo "abc" > mk_context
    # echo $$ > abc/target_ids
    # echo "on" > monitor_on  <<< fails

Return value of 'debugfs_create_dir()' is expected to be ignored in
general, but this is an exceptional case as DAMON feature is depending
on the debugfs functionality and it has the potential duplicate name
issue.  This commit therefore fixes the issue by checking the directory
creation failure and immediately return the error in the case.

Link: https://lkml.kernel.org/r/20220821180853.2400-1-sj@kernel.org
Fixes: 75c1c2b5

 ("mm/damon/dbgfs: support multiple contexts")
Signed-off-by: Badari Pulavarty <badari.pulavarty@intel.com>
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: <stable@vger.kernel.org>	[ 5.15.x]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

Colin King is working on kernel janitorial fixes in his spare time and
using his Intel email is confusing.  Use his gmail account as the default
email address.

Link: https://lkml.kernel.org/r/20220817212753.101109-1-colin.i.king@gmail.com


Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

There are two problems with the current code of memory_intersects:

First, it doesn't check whether the region (begin, end) falls inside the
region (virt, vend), that is (virt < begin && vend > end).

The second problem is if vend is equal to begin, it will return true but
this is wrong since vend (virt + size) is not the last address of the
memory region but (virt + size -1) is.  The wrong determination will
trigger the misreporting when the function check_for_illegal_area calls
memory_intersects to check if the dma region intersects with stext region.

The misreporting is as below (stext is at 0x80100000):
 WARNING: CPU: 0 PID: 77 at kernel/dma/debug.c:1073 check_for_illegal_area+0x130/0x168
 DMA-API: chipidea-usb2 e0002000.usb: device driver maps memory from kernel text or rodata [addr=800f0000] [len=65536]
 Modules linked in:
 CPU: 1 PID: 77 Comm: usb-storage Not tainted 5.19.0-yocto-standard #5
 Hardware name: Xilinx Zynq Platform
  unwind_backtrace from show_stack+0x18/0x1c
  show_stack from dump_stack_lvl+0x58/0x70
  dump_stack_lvl from __warn+0xb0/0x198
  __warn from warn_slowpath_fmt+0x80/0xb4
  warn_slowpath_fmt from check_for_illegal_area+0x130/0x168
  check_for_illegal_area from debug_dma_map_sg+0x94/0x368
  debug_dma_map_sg from __dma_map_sg_attrs+0x114/0x128
  __dma_map_sg_attrs from dma_map_sg_attrs+0x18/0x24
  dma_map_sg_attrs from usb_hcd_map_urb_for_dma+0x250/0x3b4
  usb_hcd_map_urb_for_dma from usb_hcd_submit_urb+0x194/0x214
  usb_hcd_submit_urb from usb_sg_wait+0xa4/0x118
  usb_sg_wait from usb_stor_bulk_transfer_sglist+0xa0/0xec
  usb_stor_bulk_transfer_sglist from usb_stor_bulk_srb+0x38/0x70
  usb_stor_bulk_srb from usb_stor_Bulk_transport+0x150/0x360
  usb_stor_Bulk_transport from usb_stor_invoke_transport+0x38/0x440
  usb_stor_invoke_transport from usb_stor_control_thread+0x1e0/0x238
  usb_stor_control_thread from kthread+0xf8/0x104
  kthread from ret_from_fork+0x14/0x2c

Refactor memory_intersects to fix the two problems above.

Before the 1d7db834 ("dma-debug: use memory_intersects()
directly"), memory_intersects is called only by printk_late_init:

printk_late_init -> init_section_intersects ->memory_intersects.

There were few places where memory_intersects was called.

When commit 1d7db834 ("dma-debug: use memory_intersects()
directly") was merged and CONFIG_DMA_API_DEBUG is enabled, the DMA
subsystem uses it to check for an illegal area and the calltrace above
is triggered.

[akpm@linux-foundation.org: fix nearby comment typo]
Link: https://lkml.kernel.org/r/20220819081145.948016-1-quanyang.wang@windriver.com
Fixes: 97955936

 ("asm/sections: add helpers to check for section data")
Signed-off-by: Quanyang Wang <quanyang.wang@windriver.com>
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Thierry Reding <treding@nvidia.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

The vmemmap pages is marked by kmemleak when allocated from memblock. 
Remove it from kmemleak when freeing the page.  Otherwise, when we reuse
the page, kmemleak may report such an error and then stop working.

 kmemleak: Cannot insert 0xffff98fb6eab3d40 into the object search tree (overlaps existing)
 kmemleak: Kernel memory leak detector disabled
 kmemleak: Object 0xffff98fb6be00000 (size 335544320):
 kmemleak:   comm "swapper", pid 0, jiffies 4294892296
 kmemleak:   min_count = 0
 kmemleak:   count = 0
 kmemleak:   flags = 0x1
 kmemleak:   checksum = 0
 kmemleak:   backtrace:

Link: https://lkml.kernel.org/r/20220819094005.2928241-1-liushixin2@huawei.com
Fixes: f41f2ed4

 (mm: hugetlb: free the vmemmap pages associated with each HugeTLB page)
Signed-off-by: Liu Shixin <liushixin2@huawei.com>
Reviewed-by: Muchun Song <songmuchun@bytedance.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

After commit 0737e01d ("ocfs2: ocfs2_mount_volume does cleanup job
before return error"), any procedure after ocfs2_dlm_init() fails will
trigger crash when calling ocfs2_dlm_shutdown().

ie: On local mount mode, no dlm resource is initialized.  If
ocfs2_mount_volume() fails in ocfs2_find_slot(), error handling will call
ocfs2_dlm_shutdown(), then does dlm resource cleanup job, which will
trigger kernel crash.

This solution should bypass uninitialized resources in
ocfs2_dlm_shutdown().

Link: https://lkml.kernel.org/r/20220815085754.20417-1-heming.zhao@suse.com
Fixes: 0737e01d

 ("ocfs2: ocfs2_mount_volume does cleanup job before return error")
Signed-off-by: Heming Zhao <heming.zhao@suse.com>
Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Changwei Ge <gechangwei@live.cn>
Cc: Gang He <ghe@suse.com>
Cc: Jun Piao <piaojun@huawei.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

This reverts commit 96e51ccf.

Recently we started running the kernel with rstat infrastructure on
production traffic and begin to see negative memcg stats values. 
Particularly the 'sock' stat is the one which we observed having negative
value.

$ grep "sock " /mnt/memory/job/memory.stat
sock 253952
total_sock 18446744073708724224

Re-run after couple of seconds

$ grep "sock " /mnt/memory/job/memory.stat
sock 253952
total_sock 53248

For now we are only seeing this issue on large machines (256 CPUs) and
only with 'sock' stat.  I think the networking stack increase the stat on
one cpu and decrease it on another cpu much more often.  So, this negative
sock is due to rstat flusher flushing the stats on the CPU that has seen
the decrement of sock but missed the CPU that has increments.  A typical
race condition.

For easy stable backport, revert is the most simple solution.  For long
term solution, I am thinking of two directions.  First is just reduce the
race window by optimizing the rstat flusher.  Second is if the reader sees
a negative stat value, force flush and restart the stat collection. 
Basically retry but limited.

Link: https://lkml.kernel.org/r/20220817172139.3141101-1-shakeelb@google.com
Fixes: 96e51ccf

 ("memcg: cleanup racy sum avoidance code")
Signed-off-by: Shakeel Butt <shakeelb@google.com>
Cc: "Michal Koutný" <mkoutny@suse.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Muchun Song <songmuchun@bytedance.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Yosry Ahmed <yosryahmed@google.com>
Cc: Greg Thelen <gthelen@google.com>
Cc: <stable@vger.kernel.org>	[5.15]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

zsmalloc() now returns ERR_PTR values as handles, which zram accidentally
can pass to zs_free().  Another bad scenario is when zcomp_compress()
fails - handle has default -ENOMEM value, and zs_free() will try to free
that "pointer value".

Add the missing check and make sure that zs_free() bails out when
ERR_PTR() is passed to it.

Link: https://lkml.kernel.org/r/20220816050906.2583956-1-senozhatsky@chromium.org
Fixes: c7e6f17b

 ("zsmalloc: zs_malloc: return ERR_PTR on failure")
Signed-off-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Nitin Gupta <ngupta@vflare.org>,
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

Take the mmap_read_lock() when using the VMA in binder_alloc_print_pages()
and when checking for a VMA in binder_alloc_new_buf_locked().

It is worth noting binder_alloc_new_buf_locked() drops the VMA read lock
after it verifies a VMA exists, but may be taken again deeper in the call
stack, if necessary.

Link: https://lkml.kernel.org/r/20220810160209.1630707-1-Liam.Howlett@oracle.com
Fixes: a43cfc87

 (android: binder: stop saving a pointer to the VMA)
Signed-off-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Reported-by: Ondrej Mosnacek <omosnace@redhat.com>
Reported-by:  <syzbot+a7b60a176ec13cafb793@syzkaller.appspotmail.com>
Acked-by: Carlos Llamas <cmllamas@google.com>
Tested-by: Ondrej Mosnacek <omosnace@redhat.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Christian Brauner (Microsoft) <brauner@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Hridya Valsaraju <hridya@google.com>
Cc: Joel Fernandes <joel@joelfernandes.org>
Cc: Martijn Coenen <maco@android.com>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Todd Kjos <tkjos@android.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: "Arve Hjønnevåg" <arve@android.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

The below referenced commit makes the same error as 1c563432 ("mm: fix
is_pinnable_page against a cma page"), re-interpreting the logic to
exclude pinning of the zero page, which breaks device assignment with
vfio.

To avoid further subtle mistakes, split the logic into discrete tests.

[akpm@linux-foundation.org: simplify comment, per John]
Link: https://lkml.kernel.org/r/166015037385.760108.16881097713975517242.stgit@omen
Link: https://lore.kernel.org/all/165490039431.944052.12458624139225785964.stgit@omen
Fixes: f25cbb7a

 ("mm: add zone device coherent type memory support")
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Suggested-by: Matthew Wilcox <willy@infradead.org>
Suggested-by: Felix Kuehling <felix.kuehling@amd.com>
Tested-by: Slawomir Laba <slawomirx.laba@intel.com>
Reviewed-by: John Hubbard <jhubbard@nvidia.com>
Cc: Alex Sierra <alex.sierra@amd.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Alistair Popple <apopple@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

The rest of the kallsyms symbols are useless without knowing the number of
symbols in the table.  In an earlier patch, I somehow dropped the
kallsyms_num_syms symbol, so add it back in.

Link: https://lkml.kernel.org/r/20220808205410.18590-1-stephen.s.brennan@oracle.com
Fixes: 5fd8fea9

 ("vmcoreinfo: include kallsyms symbols")
Signed-off-by: Stephen Brennan <stephen.s.brennan@oracle.com>
Cc: Baoquan He <bhe@redhat.com>
Cc: Dave Young <dyoung@redhat.com>
Cc: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

Both @canonical and @ibm email addresses are invalid now; use my personal
address instead.

Link: https://lkml.kernel.org/r/20220804202207.439427-1-gpiccoli@igalia.com


Signed-off-by: Guilherme G. Piccoli <gpiccoli@igalia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

When a disk is removed, bdi_unregister gets called to stop further
writeback and wait for associated delayed work to complete.  However,
wb_inode_writeback_end() may schedule bandwidth estimation dwork after
this has completed, which can result in the timer attempting to access the
just freed bdi_writeback.

Fix this by checking if the bdi_writeback is alive, similar to when
scheduling writeback work.

Since this requires wb->work_lock, and wb_inode_writeback_end() may get
called from interrupt, switch wb->work_lock to an irqsafe lock.

Link: https://lkml.kernel.org/r/20220801155034.3772543-1-khazhy@google.com
Fixes: 45a2966f

 ("writeback: fix bandwidth estimate for spiky workload")
Signed-off-by: Khazhismel Kumykov <khazhy@google.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Cc: Michael Stapelberg <stapelberg+linux@google.com>
Cc: Wu Fengguang <fengguang.wu@intel.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

If we allocate a new page, we need to make sure that our folio matches
that new page.

If we do end up in this code path, we store the wrong page in the shmem
inode's page cache, and I would rather imagine that data corruption
ensues.

This will be solved by changing shmem_replace_page() to
shmem_replace_folio(), but this is the minimal fix.

Link: https://lkml.kernel.org/r/20220730042518.1264767-1-willy@infradead.org
Fixes: da08e9b7

 ("mm/shmem: convert shmem_swapin_page() to shmem_swapin_folio()")
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: William Kucharski <william.kucharski@oracle.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

In MCOPY_ATOMIC_CONTINUE case with a non-shared VMA, pages in the page
cache are installed in the ptes.  But hugepage_add_new_anon_rmap is called
for them mistakenly because they're not vm_shared.  This will corrupt the
page->mapping used by page cache code.

Link: https://lkml.kernel.org/r/20220712130542.18836-1-linmiaohe@huawei.com
Fixes: f6191471

 ("userfaultfd: add UFFDIO_CONTINUE ioctl")
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

Pull btrfs fixes from David Sterba:
 "Fixes:

   - check that subvolume is writable when changing xattrs from security
     namespace

   - fix memory leak in device lookup helper

   - update generation of hole file extent item when merging holes

   - fix space cache corruption and potential double allocations; this
     is a rare bug but can be serious once it happens, stable backports
     and analysis tool will be provided

   - fix error handling when deleting root references

   - fix crash due to assert when attempting to cancel suspended device
     replace, add message what to do if mount fails due to missing
     replace item

  Regressions:

   - don't merge pages into bio if their page offset is not contiguous

   - don't allow large NOWAIT direct reads, this could lead to short
     reads eg. in io_uring"

* tag 'for-6.0-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
  btrfs: add info when mount fails due to stale replace target
  btrfs: replace: drop assert for suspended replace
  btrfs: fix silent failure when deleting root reference
  btrfs: fix space cache corruption and potential double allocations
  btrfs: don't allow large NOWAIT direct reads
  btrfs: don't merge pages into bio if their page offset is not contiguous
  btrfs: update generation of hole file extent item when merging holes
  btrfs: fix possible memory leak in btrfs_get_dev_args_from_path()
  btrfs: check if root is readonly while setting security xattr

Pull cfis fixes from Steve French:

 - two locking fixes (zero range, punch hole)

 - DFS 9 fix (padding), affecting some servers

 - three minor cleanup changes

* tag '6.0-rc2-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
  cifs: Add helper function to check smb1+ server
  cifs: Use help macro to get the mid header size
  cifs: Use help macro to get the header preamble size
  cifs: skip extra NULL byte in filenames
  smb3: missing inode locks in punch hole
  smb3: missing inode locks in zero range

Pull misc x86 fixes from Ingo Molnar:

 - Fix PAT on Xen, which caused i915 driver failures

 - Fix compat INT 80 entry crash on Xen PV guests

 - Fix 'MMIO Stale Data' mitigation status reporting on older Intel CPUs

 - Fix RSB stuffing regressions

 - Fix ORC unwinding on ftrace trampolines

 - Add Intel Raptor Lake CPU model number

 - Fix (work around) a SEV-SNP bootloader bug providing bogus values in
   boot_params->cc_blob_address, by ignoring the value on !SEV-SNP
   bootups.

 - Fix SEV-SNP early boot failure

 - Fix the objtool list of noreturn functions and annotate snp_abort(),
   which bug confused objtool on gcc-12.

 - Fix the documentation for retbleed

* tag 'x86-urgent-2022-08-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  Documentation/ABI: Mention retbleed vulnerability info file for sysfs
  x86/sev: Mark snp_abort() noreturn
  x86/sev: Don't use cc_platform_has() for early SEV-SNP calls
  x86/boot: Don't propagate uninitialized boot_params->cc_blob_address
  x86/cpu: Add new Raptor Lake CPU model number
  x86/unwind/orc: Unwind ftrace trampolines with correct ORC entry
  x86/nospec: Fix i386 RSB stuffing
  x86/nospec: Unwreck the RSB stuffing
  x86/bugs: Add "unknown" reporting for MMIO Stale Data
  x86/entry: Fix entry_INT80_compat for Xen PV guests
  x86/PAT: Have pat_enabled() properly reflect state when running on Xen

Pull x86 perf fixes from Ingo Molnar:
 "Misc fixes: an Arch-LBR fix, a PEBS enumeration fix, an Intel DS fix,
  PEBS constraints fix on Alder Lake CPUs and an Intel uncore PMU fix"

* tag 'perf-urgent-2022-08-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  perf/x86/intel/uncore: Fix broken read_counter() for SNB IMC PMU
  perf/x86/intel: Fix pebs event constraints for ADL
  perf/x86/intel/ds: Fix precise store latency handling
  perf/x86/core: Set pebs_capable and PMU_FL_PEBS_ALL for the Baseline
  perf/x86/lbr: Enable the branch type for the Arch LBR by default

Merge tag 'perf-tools-fixes-for-v6.0-2022-08-27' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux

Pull perf tools fixes from Arnaldo Carvalho de Melo:

 - Fixup setup of weak groups when using 'perf stat --repeat', add a
   'perf test' for it.

 - Fix memory leaks in 'perf sched record' detected with
   -fsanitize=address.

 - Fix build when PYTHON_CONFIG is user supplied.

 - Capitalize topdown metrics' names in 'perf stat', so that the output,
   sometimes parsed, matches the Intel SDM docs.

 - Make sure the documentation for the save_type filter about Intel
   systems with Arch LBR support (12th-Gen+ client or 4th-Gen Xeon+
   server) reflects recent related kernel changes.

 - Fix 'perf record' man page formatting of description of support to
   hybrid systems.

 - Update arm64´s KVM header from the kernel sources.

* tag 'perf-tools-fixes-for-v6.0-2022-08-27' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux:
  perf stat: Capitalize topdown metrics' names
  perf docs: Update the documentation for the save_type filter
  perf sched: Fix memory leaks in __cmd_record detected with -fsanitize=address
  perf record: Fix manpage formatting of description of support to hybrid systems
  perf test: Stat test for repeat with a weak group
  perf stat: Clear evsel->reset_group for each stat run
  tools kvm headers arm64: Update KVM header from the kernel sources
  perf python: Fix build when PYTHON_CONFIG is user supplied

Pull thermal control fixes from Rafael Wysocki:
 "Fix two issues introduced recently and one driver problem leading to a
  NULL pointer dereference in some cases.

  Specifics:

   - Add missing EXPORT_SYMBOL_GPL in the thermal core and add back the
     required 'trips' property to the thermal zone DT bindings (Daniel
     Lezcano)

   - Prevent the int340x_thermal driver from crashing when a package
     with a buffer of 0 length is returned by an ACPI control method
     evaluated by it (Lee, Chun-Yi)"

* tag 'thermal-6.0-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  thermal/int340x_thermal: handle data_vault when the value is ZERO_SIZE_PTR
  dt-bindings: thermal: Fix missing required property
  thermal/core: Add missing EXPORT_SYMBOL_GPL

Pull power management fix from Rafael Wysocki:
 "Make __resolve_freq() check the presence of the frequency table
  instead of checking whether or not the ->target_index() callback is
  implemented by the driver, because that need not be the case when
  __resolve_freq() is used (Lukasz Luba)"

* tag 'pm-6.0-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  cpufreq: check only freq_table in __resolve_freq()

Pull ACPI fixes from Rafael Wysocki:
 "These fix issues introduced by recent changes related to the handling
  of ACPI device properties and a coding mistake in the exit path of the
  ACPI processor driver.

  Specifics:

   - Prevent acpi_thermal_cpufreq_exit() from attempting to remove
     the same frequency QoS request multiple times (Riwen Lu)

   - Fix type detection for integer ACPI device properties (Stefan
     Binding)

   - Avoid emitting false-positive warnings when processing ACPI
     device properties and drop the useless default case from the
     acpi_copy_property_array_uint() macro (Sakari Ailus)"

* tag 'acpi-6.0-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  ACPI: property: Remove default association from integer maximum values
  ACPI: property: Ignore already existing data node tags
  ACPI: property: Fix type detection of unified integer reading functions
  ACPI: processor: Remove freq Qos request for all CPUs