- Nov 16, 2009
-
-
Matt Carlson authored
This patch avoids reprogramming the RCB NIC addresses for all 5755 and later devices. The address is incorrect for 5717 devices and should be correct by default for all other affected devices. Signed-off-by:
Matt Carlson <mcarlson@broadcom.com> Reviewed-by:
Michael Chan <mchan@broadcom.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Matt Carlson authored
This patch adds the 5717 phy ID. Signed-off-by:
-
Jarek Poplawski authored
Recent changes in the TX error propagation require additional checking and masking of values returned from hard_start_xmit(), mainly to separate cases where skb was consumed. This aim can be simplified by changing the order of NETDEV_TX and NET_XMIT codes, because the latter are treated similarly to negative (ERRNO) values. After this change much simpler dev_xmit_complete() is also used in sch_direct_xmit(), so it is moved to netdevice.h. Additionally NET_RX definitions in netdevice.h are moved up from between TX codes to avoid confusion while reading the TX comment. Signed-off-by:
Jarek Poplawski <jarkao2@gmail.com> Signed-off-by:
-
Tomas Winkler authored
drop the version parts not needed for in-tree driver Signed-off-by:
Tomas Winkler <tomas.winkler@intel.com> Signed-off-by:
-
Tomas Winkler authored
Use device id number directly accompany with comment rather then a #define Signed-off-by:
-
Eric Dumazet authored
Check the return value of ndo_select_queue(). If the value isn't smaller than the real_num_tx_queues, print a warning message, and reset it to zero. Signed-off-by:
Changli Gao <xiaosuo@gmail.com> Signed-off-by:
Eric Dumazet <eric.dumazet@gmail.com> ---- Signed-off-by:
-
Amit Kumar Salecha authored
Changing MAINTAINERS for netxen nic driver. Signed-off-by:
Amit Kumar Salecha <amit.salecha@qlogic.com> Signed-off-by:
-
Arnd Bergmann authored
My last commit introduced an typo causing the compat_ioctl function to do nothing useful. The obvious way for an ioctl function to work is to look at the command, not the argument first. Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
-
- Nov 15, 2009
-
-
-
Arnaldo Carvalho de Melo authored
Reported-by:
Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by:
Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by:
-
- Nov 14, 2009
-
-
Wolfram Sang authored
Taken from socketcan-svn, fixed remaining todos, cleaned up, tested with a phyCORE-MPC5200B-IO and a custom board. Signed-off-by:
Wolfram Sang <w.sang@pengutronix.de> Cc: Wolfgang Grandegger <wg@grandegger.com> Cc: Grant Likely <grant.likely@secretlab.ca> Cc: David Miller <davem@davemloft.net> Signed-off-by:
-
Rémi Denis-Courmont authored
Signed-off-by:
Rémi Denis-Courmont <remi.denis-courmont@nokia.com> Signed-off-by:
-
Rémi Denis-Courmont authored
Signed-off-by:
-
Ursula Braun authored
tx_bytes value must be updated by skb length before skb is freed. Signed-off-by:
Ursula Braun <ursula.braun@de.ibm.com> Signed-off-by:
-
Ursula Braun authored
The cu3088-driver used as common base for lcs- and ctcm-devices makes it difficult to assign the appropriate driver to an lcs-device or a ctcm-device. This patch eliminates the cu3088-driver and thus the root device "cu3088". Path /sys/devices/cu3088 is replaced with the pathes /sys/devices/lcs and /sys/devices/ctcm. Patch is based on a proposal from Cornelia Huck. Cc: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by:
-
Frank Blaschka authored
State transition to DEV_STATE_STOPPED indicates all outstanding I/O has finished. Add wait queue to wait for this state. Signed-off-by:
Frank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by:
-
Ursula Braun authored
If iucv_work_queue is not empty during kernel freeze, a kernel panic occurs. This suspend-patch adds flushing of the work queue for pending connection requests and severing of remaining pending connections. Signed-off-by:
-
Eric Dumazet authored
While investigating for network latencies, I found inet_getid() was a contention point for some workloads, as inet_peer_idlock is shared by all inet_getid() users regardless of peers. One way to fix this is to make ip_id_count an atomic_t instead of __u16, and use atomic_add_return(). In order to keep sizeof(struct inet_peer) = 64 on 64bit arches tcp_ts_stamp is also converted to __u32 instead of "unsigned long". Signed-off-by:
-
Eric Dumazet authored
When handling large number of netdevices, inet6_dump_addr() is very slow because it has O(N^2) complexity. Instead of scanning one single list, we can use the NETDEV_HASHENTRIES sub lists of the dev_index hash table, and RCU lookups. Signed-off-by:
-
Lucian Adrian Grijincu authored
The first "node" is supposed to be the cursor used in the for_each. The second "node" is ment literally and should not be macro expanded: it's the name of the hlist_node field from the inet_bind_bucket. This currently works because when inet_bind_bucket_for_each is called it's argument is still "node". Signed-off-by:
Lucian Adrian Grijincu <lgrijincu@ixiacom.com> Signed-off-by:
-
Eric Dumazet authored
Stephen Hemminger a écrit : > On Thu, 12 Nov 2009 15:11:36 +0100 > Eric Dumazet <eric.dumazet@gmail.com> wrote: > >> When handling large number of netdevices, inet_dump_ifaddr() >> is very slow because it has O(N^2) complexity. >> >> Instead of scanning one single list, we can use the NETDEV_HASHENTRIES >> sub lists of the dev_index hash table, and RCU lookups. >> >> Signed-off-by:
Stephen Hemminger <shemminger@vyatta.com> Signed-off-by:
-
PJ Waskiewicz authored
This patch pairs similar-numbered Rx and Tx queues onto a single MSI-X vector. For example, Tx queue 0 and Rx queue 0's interrupt with be ethX-RxTx-0. This allows for more efficient cleanup, since fewer interrupts will be firing during device operation. It also helps with a cleaner CPU affinity for IRQ affinity. Signed-off-by:
Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com> Signed-off-by:
Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by:
-
Nelson, Shannon authored
Signed-off-by:
Shannon Nelson <shannon.nelson@intel.com> Signed-off-by:
-
Alexander Duyck authored
This patch makes it so that we only recycle pages when they are from the local NUMA node. Non-local pages are freed and replaced with locally allocated pages. Signed-off-by:
Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by:
-
Alexander Duyck authored
We were previously only checking the first tx ring to see if it had any packets in it when the link when down. However we should be checking all of the rings so this patch makes it so that all of the rings are now being checked. Signed-off-by:
-
Alexander Duyck authored
This patch removes unused variables total_tx_bytes, total_tx_packets, total_rx_bytes, and total_rx_packets from the adapter struct. Signed-off-by:
-
Alexander Duyck authored
This patch does some refactoring work that I felt was needed after reviewing the changes recently submitted relating to the replacement of net_stats with netdev->stats. This patch essentially creates two different collections of stats. The first handles the adapter specific states and is stored in gstring_stats, and the second is for netdev specific stats and is stored in gstring_net_stats. Signed-off-by:
-
Alexander Duyck authored
This patch makes it so that nics such as 82576 and newer can support more hardware queues when there are more than 4 cpus by combining a tx/rx queue pair onto one interrupt so that 8 queue pairs can be supported and thus allow for more queues. Signed-off-by:
-
Alexander Duyck authored
Current code is quite large and making igb_probe difficult to read. Signed-off-by:
-
Alexander Duyck authored
Change the type for the ring size values to u16 and use min/max_t instead of min/max. Signed-off-by:
-
Wan ZongShun authored
To fix the bug of checking on signed return value using unsigned statement. Thanks Roel Kluin for digging out it. Signed-off-by:
Roel Kluin <roel.kluin@gmail.com> Signed-off-by:
Wan ZongShun <mcuos.com@gmail.com> Signed-off-by:
-
Eric Dumazet authored
We need to use next_det_device_rcu() in RCU protected section. We also can avoid in_dev_get()/in_dev_put() overhead (code size mainly) in rcu_read_lock() sections. Signed-off-by:
-
Eric Dumazet authored
No longer need read_lock(&dev_base_lock), use RCU instead. We also can avoid taking references on inet6_dev structs. Signed-off-by:
-
William Allen Simpson authored
Define two symbols needed in both kernel and user space. Remove old (somewhat incorrect) kernel variant that wasn't used in most cases. Default should apply to both RMSS and SMSS (RFC2581). Replace numeric constants with defined symbols. Stand-alone patch, originally developed for TCPCT. Signed-off-by:
<William.Allen.Simpson@gmail.com> Acked-by:
-
Patrick McHardy authored
Both vlan and macvlan devices usually don't use a qdisc and immediately queue packets to the underlying device. Propagate transmission state of the underlying device to the upper layers so they can react on congestion and/or inform the sending process. Signed-off-by:
Patrick McHardy <kaber@trash.net> Signed-off-by:
-
Patrick McHardy authored
Currently the ->ndo_hard_start_xmit() callbacks are only permitted to return one of the NETDEV_TX codes. This prevents any kind of error propagation for virtual devices, like queue congestion of the underlying device in case of layered devices, or unreachability in case of tunnels. This patches changes the NET_XMIT codes to avoid clashes with the NETDEV_TX codes and changes the two callers of dev_hard_start_xmit() to expect either errno codes, NET_XMIT codes or NETDEV_TX codes as return value. In case of qdisc_restart(), all non NETDEV_TX codes are mapped to NETDEV_TX_OK since no error propagation is possible when using qdiscs. In case of dev_queue_xmit(), the error is propagated upwards. Signed-off-by:
-
Joe Perches authored
Untested, no hardware Signed-off-by:
Joe Perches <joe@perches.com> Signed-off-by:
-
- Nov 13, 2009
-
-
Dmitry Eremin-Solenikov authored
Move ieee802154 initialisation to subsys_initcall call, so that wpan-phy class is initialised before all devices (thus saving us from oops during bootup). Signed-off-by:Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
-
- Nov 12, 2009
-
-
Arnd Bergmann authored
We have two implementations of the compat_ioctl handling for ATM, the one that we have had for ages in fs/compat_ioctl.c and the one added to net/atm/ioctl.c by David Woodhouse. Unfortunately, both versions are incomplete, and in practice we use a very confusing combination of the two. For ioctl numbers that have the same identifier on 32 and 64 bit systems, we go directly through the compat_ioctl socket operation, for those that differ, we do a conversion in fs/compat_ioctl.c. This patch moves both variants into the vcc_compat_ioctl() function, while preserving the current behaviour. It also kills off the COMPATIBLE_IOCTL definitions that we never use here. Doing it this way is clearly not a good solution, but I hope it is a step into the right direction, so that someone is able to clean up this mess for real. Signed-off-by:
-
Arnd Bergmann authored
Handling for SIOCSHWTSTAMP is broken on architectures with a split user/kernel address space like s390, because it passes a real user pointer while using set_fs(KERNEL_DS). A similar problem might arise the next time somebody adds code to dev_ifsioc. Split up dev_ifsioc into three separate functions for SIOCSHWTSTAMP, SIOC*IFMAP and all other numbers so we can get rid of set_fs in all potentially affected cases. Signed-off-by:
-
