Merge tag 'v6.3-rockchip-dts64-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into arm/dt

New SoC supported is the rk3588.

New boards rk3588-evb1, EmbedFire Lubancat 1+2 (based on different SoCs),
a number of Radxa boards (rock-5a and -5b, compute module 3, cm3i e25),
OrangePi R1 plus and the Edgeble Neu6 SoM and baseboard.

A number of improvements for the Odroid Go (and its clones) including
touchscreen and display support, led and audio changes.

As well as some improvements for the rk356x, better gpu thermal values for
px30 and some minor improvement for rock3a, rock5a, rk3566-demo,
roc-rk3399-pc and bi-r2pro.

* tag 'v6.3-rockchip-dts64-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: (46 commits)
  arm64: dts: rockchip: Correct the model name for Radxa E25
  arm64: dts: rockchip: Drop unneeded model for Radxa CM3i
  arm64: dts: rockchip: Add missing CM3i fallback compatible for Radxa E25
  arm64: dts: rockchip: Fix compatible for Radxa CM3
  arm64: dts: rockchip: rk3566: Enable WiFi, BT support for Radxa CM3
  arm64: dts: rockchip: Enable Ethernet for Radxa CM3 IO
  arm64: dts: rockchip: add display to RG503
  arm64: dts: rockchip: add pinctrls for 16-bit/18-bit rgb interface to rk356x
  arm64: dts: rockchip: Update eMMC, SD aliases for Radxa SBC boards
  arm64: dts: rockchip: Update eMMC, SD aliases for Radxa SoM boards
  arm64: dts: rockchip: Add Radxa Compute Module 3 IO board
  arm64: dts: rockchip: Add rk3566 based Radxa Compute Module 3
  dt-bindings: arm: rockchip: Add Radxa Compute Module 3
  arm64: dts: rockchip: Fix RX delay for ethernet phy on rk3588s-rock5a
  arm64: dts: rockchip: add Hynitron cst340 for Anbernic 353 series
  arm64: dts: rockchip: Enable wifi module AP6398s for rk3566 box demo
  arm64: dts: rockchip: rk3588: Add Edgeble Neu6 Model A IO
  arm64: dts: rockchip: rk3588: Add Edgeble Neu6 Model A SoM
  arm64: dts: rockchip: fix hdmi cec on rock-3a
  arm64: dts: rockchip: assign rate to clk_rtc_32k on rk356x
  ...

Link: https://lore.kernel.org/r/6491956.DvuYhMxLoT@phil


Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'v6.2-next-dts64' of https://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux into arm/dt

mt7986:
- add USB host support
- add support for mmc, pcie
- add support for Bananpi R3

mt8173:
- switch to SMC watchdog for Acer Chromebook R13
- move panel under aux bus

mt8183:
- support detachable keyboards on kukui based Chromebooks
- describe 13 MHz clock correctly
- complete CPU cache information

mt8186:
- Add pm-domains, iommu, dsi
- describe 13 MHz clock correctly
- complete CPU cache information
- add crypto support for the eMMC
- add audio controler, DPI and ADSP mailbox support
- describe CPUs as a single cluster

mt8192:
- describe 13 MHz clock correctly
- complete CPU cache information
- enable display regulators, backlight, internal display and audio on
  Acer Chromebook 514
- describe CPUs as a single cluster

mt8195:
- Add power domain to t-phy
- describe 13 MHz clock correctly
- complete CPU cache information
- enable audio for Acer Chromebook Spin 513
- add ethernet support for the demo board
- add JPG enconder and decoder device
- describe CPUs as a single cluster

Smaller changes for mt6795, mt7622, mt8516 and mt6358.

* tag 'v6.2-next-dts64' of https://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux: (58 commits)
  arm64: dts: mediatek: mt8516: Fix the watchdog node name
  arm64: dts: mediatek: mt7986: Fix watchdog compatible
  arm64: dts: mediatek: mt8195: Fix watchdog compatible
  arm64: dts: mediatek: mt8186: Fix watchdog compatible
  arm64: dts: mt8173-elm: Switch to SMC watchdog
  arm64: dts: mediatek: mt7622: Add missing pwm-cells to pwm node
  arm64: dts: mt8192: Change idle states names to reflect actual function
  arm64: dts: mt8186: Change idle states names to reflect actual function
  arm64: dts: mt8195: Change idle states names to reflect actual function
  arm64: dts: mt8186: Fix CPU map for single-cluster SoC
  arm64: dts: mt8192: Fix CPU map for single-cluster SoC
  arm64: dts: mt8195: Fix CPU map for single-cluster SoC
  arm64: dts: mt8195: add jpeg decode device node
  arm64: dts: mt8195: add jpeg encode device node
  arm64: dts: mediatek: mt8183: drop double interrupts
  arm64: dts: mediatek: mt7622: drop serial clock-names
  arm64: dts: mt8195: Add efuse node to mt8195
  arm64: dts: mt8183: jacuzzi: Move panel under aux-bus
  arm64: dts: mediatek: mt8173-elm: Move display to ps8640 auxiliary bus
  arm64: dts: mt8195: Add Ethernet controller
  ...

Link: https://lore.kernel.org/r/2eefe6d4-6ca3-dc5f-6a04-f4f3c49692dd@gmail.com


Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'v6.2-next-dts32' of https://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux into arm/dt

Clean ups only:
- deleting unsused pins-are-numbered property
- not existing second IRQ

* tag 'v6.2-next-dts32' of https://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux:
  ARM: dts: mediatek: Remove pins-are-numbered property
  arm: dts: mt7629: Remove extra interrupt from timer node

Link: https://lore.kernel.org/r/17aee808-1f3f-fe75-68d4-adb71915e5cb@gmail.com


Signed-off-by: Arnd Bergmann <arnd@arndb.de>

ARM: Zynq DT changes for v6.3

- Fix node names to be aligned with dt schema
- Describe qspi controller
- Use xlnx prefix for ethernet IP

* tag 'zynq-dt-for-v6.3' of https://github.com/Xilinx/linux-xlnx:
  ARM: zynq: Use recommended dma-controller name instead of dmac
  ARM: dts: zynq: Add xlnx prefix to GEM compatible string
  ARM: zynq: Comment interrupt names IRQs for pl330
  ARM: dts: zynq: add QSPI controller node

Link: https://lore.kernel.org/r/850bb18f-ca22-f3d7-71a7-f367bfef4ccc@monstr.eu


Signed-off-by: Arnd Bergmann <arnd@arndb.de>

arm64: ZynqMP SOC changes for v6.3

- Fix node names to be aligned with dt schema
- Rename DT overlay files to dtso
- Add snps,resume-hs-terminations to usb nodes
- Describe gpio-modepin node
- Use xlnx prefix for ethernet IP

* tag 'zynqmp-dt-for-v6.3' of https://github.com/Xilinx/linux-xlnx:
  arm64: dts: zynqmp: Add xlnx prefix to GEM compatible string
  arm64: dts: zynqmp: Remove clock-names from GEM in zynqmp-clk-ccf.dtsi
  arm64: dts: zynqmp: Add mode-pin GPIO controller DT node
  arm64: zynqmp: Enable hs termination flag for USB dwc3 controller
  arm64: dts: xilinx: Rename DTB overlay source files from .dts to .dtso
  arm64: xilinx: Fix opp-table-cpu
  arm64: dts: xilinx: align LED node names with dtschema

Link: https://lore.kernel.org/r/89d82a7e-6b42-97ce-2912-aa7dec965ff2@monstr.eu


Signed-off-by: Arnd Bergmann <arnd@arndb.de>

The proper name is 'watchdog', not 'toprgu' and remove the unused
label.

Signed-off-by: Allen-KH Cheng <allen-kh.cheng@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Link: https://lore.kernel.org/r/20221108033209.22751-5-allen-kh.cheng@mediatek.com


Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>

MT7986's watchdog embeds a reset controller and needs only the
mediatek,mt7986-wdt compatible string as the MT6589 one is there
for watchdogs that don't have any reset controller capability.

Fixes: 50137c15

 ("arm64: dts: mediatek: add basic mt7986 support")
Signed-off-by: Allen-KH Cheng <allen-kh.cheng@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Link: https://lore.kernel.org/r/20221108033209.22751-4-allen-kh.cheng@mediatek.com


Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>

MT8195's watchdog embeds a reset controller and needs only the
mediatek,mt8195-wdt compatible string as the MT6589 one is there
for watchdogs that don't have any reset controller capability.

Fixes: 37f25828

 ("arm64: dts: Add mediatek SoC mt8195 and evaluation board")
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Co-developed-by: Allen-KH Cheng <allen-kh.cheng@mediatek.com>
Signed-off-by: Allen-KH Cheng <allen-kh.cheng@mediatek.com>
Reviewed-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Link: https://lore.kernel.org/r/20221108033209.22751-3-allen-kh.cheng@mediatek.com


Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>

MT8186's watchdog embeds a reset controller and needs only the
mediatek,mt8186-wdt compatible string as the MT6589 one is there
for watchdogs that don't have any reset controller capability.

Fixes: 2e78620b

 ("arm64: dts: Add MediaTek MT8186 dts and evaluation board and Makefile")
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Co-developed-by: Allen-KH Cheng <allen-kh.cheng@mediatek.com>
Signed-off-by: Allen-KH Cheng <allen-kh.cheng@mediatek.com>
Reviewed-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Link: https://lore.kernel.org/r/20221108033209.22751-2-allen-kh.cheng@mediatek.com


Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>

Switch to SMC watchdog because we need direct control of HW watchdog
registers from kernel. The corresponding firmware was uploaded in
https://review.trustedfirmware.org/c/TF-A/trusted-firmware-a/+/3405

.

Signed-off-by: Pin-yen Lin <treapking@chromium.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20220729053254.220585-1-treapking@chromium.org


Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>

Specify #pwm-cells on pwm@11006000 to make it actually usable.

Fixes: ae457b76

 ("arm64: dts: mt7622: add SoC and peripheral related device nodes")
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20221128112028.58021-2-angelogioacchino.delregno@collabora.com


Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>

The names of the idle states are misleading being this a single cluster
SoC, a cluster-sleep idle state is impossible!

After some research in ATF, it emerged that the cpu-sleep state is in
reality putting CPUs in retention state, while the cluster-sleep one
is turning off the CPUs.

Summarizing renaming:
 - cpu-sleep -> cpu-retention
 - cluster-sleep -> cpu-off

Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20230126103526.417039-7-angelogioacchino.delregno@collabora.com


Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>

The names of the idle states are misleading being this a single cluster
SoC, a cluster-off idle state is impossible!

After some research in ATF, it emerged that the cpu-off state is in
reality putting CPUs in retention state, while the cluster-off one
is turning off the CPUs.

Summarizing renaming:
 - cpu-off -> cpu-retention
 - cluster-off -> cpu-off

Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20230126103526.417039-6-angelogioacchino.delregno@collabora.com


Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>

The names of the idle states are misleading being this a single cluster
SoC, a cluster-off idle state is impossible!

After some research in ATF, it emerged that the cpu-off state is in
reality putting CPUs in retention state, while the cluster-off one
is turning off the CPUs.

Summarizing renaming:
 - cpu-off -> cpu-retention
 - cluster-off -> cpu-off

Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20230126103526.417039-5-angelogioacchino.delregno@collabora.com


Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>

MT8186 features the ARM DynamIQ technology and combines both two
Cortex-A76 (big) and six Cortex-A55 (LITTLE) CPUs in one cluster:
fix the CPU map to reflect that.

Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Fixes: 2e78620b ("arm64: dts: Add MediaTek MT8186 dts and evaluation board and Makefile")
Link: https://lore.kernel.org/r/20230126103526.417039-4-angelogioacchino.delregno@collabora.com


Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>

MT8192 features the ARM DynamIQ technology and combines both four
Cortex-A76 (big) and four Cortex-A55 (LITTLE) CPUs in one cluster:
fix the CPU map to reflect that.

Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Fixes: 48489980 ("arm64: dts: Add Mediatek SoC MT8192 and evaluation board dts and Makefile")
Link: https://lore.kernel.org/r/20230126103526.417039-3-angelogioacchino.delregno@collabora.com


Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>

MT8195 features the ARM DynamIQ technology and combines both four
Cortex-A78 (big) and four Cortex-A55 (LITTLE) CPUs in one cluster:
fix the CPU map to reflect that.

Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Fixes: 37f25828 ("arm64: dts: Add mediatek SoC mt8195 and evaluation board")
Link: https://lore.kernel.org/r/20230126103526.417039-2-angelogioacchino.delregno@collabora.com


Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>

Merge tag 'amlogic-arm-dt-for-v6.3' of https://git.kernel.org/pub/scm/linux/kernel/git/amlogic/linux into arm/dt

Amlogic ARM mach-meson changes for v6.3:
- align OPP table names with DT schema
- meson8/8b: Add more L2 (PL310) cache properties
- align LED node names with dtschema

* tag 'amlogic-arm-dt-for-v6.3' of https://git.kernel.org/pub/scm/linux/kernel/git/amlogic/linux:
  ARM: dts: meson8: align OPP table names with DT schema
  ARM: dts: meson8b: Add more L2 (PL310) cache properties
  ARM: dts: meson8: Add more L2 (PL310) cache properties
  ARM: dts: meson: align LED node names with dtschema

Link: https://lore.kernel.org/r/61700737-c226-1c07-fba7-6dca896fdab4@linaro.org


Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'amlogic-arm64-dt-for-v6.3' of https://git.kernel.org/pub/scm/linux/kernel/git/amlogic/linux into arm/dt

Amlogic ARM64 DT changes for v6.3:
- Merge of immutable bindings branch with Reset & power domain binding
- New boards:
 - Odroid-N2L (Smaller version of Odroid-N2+)
 - BananaPi M2-Pro (Variant of BPI=M5 with on-board wifi)
 - Radxa Zero2 (New version of Radza Zero with A311D SoC)
- Add DT node for the VIPNano-QI on the A311D
- DT bindings fixups covering all SoC families
 - MAC address nodes
 - ethernet PHY node name
 - scpi & child node names
 - SD/SDIO node name
 - USB supply name
 - invalid clock-names
 - rng node name
 - rtc node name
 - ETH phy mux node name
 - button & adc keys node name
 - leds node names
 - RK818 pmic properties
- remove CPU opps below 1GHz for G12A boards, like it was done for G12B/SM1
- Fix WiFi/Bt definition around P212 & Khadas VIM1
- Add audio node to P212
- Fix FAN trip definition to Odroid-HC4
- Fix gpio-fan gpios definition
- Permit Radxa Zero OTG on USB1
- Fix VDDIO_C enable gpio by using OPEN DRAIN flag

* tag 'amlogic-arm64-dt-for-v6.3' of https://git.kernel.org/pub/scm/linux/kernel/git/amlogic/linux: (43 commits)
  arm64: dts: meson: add support for Radxa Zero2
  dt-bindings: arm: amlogic: add support for Radxa Zero2
  arm64: dts: meson: add support for BananaPi M2-Pro
  dt-bindings: arm: amlogic: add support for BananaPi M2-Pro
  arm64: dts: meson: bananapi-m5: convert dts to dtsi
  arm64: dts: meson: bananapi-m5: remove redundant status from sound node
  arm64: dts: meson: bananapi-m5: switch VDDIO_C pin to OPEN_DRAIN
  arm64: dts: meson: radxa-zero: allow usb otg mode
  arm64: dts: meson-gxm-khadas-vim2: use gpio-fan matrix instead of an array
  arm64: dts: meson-g12b-odroid: Add initial support for Hardkernel ODROID-N2L
  arm64: dts: meson-g12b: move common node into new odroid.dtsi
  dt-bindings: arm: amlogic: document Odroid-N2L
  arm64: dts: amlogic: meson-sm1-odroid-hc4: fix active fan thermal trip
  arm64: dts: meson: add audio playback to S905X-P212 dts
  arm64: dts: meson: remove WiFi/BT nodes from Khadas VIM1
  arm64: dts: meson: move pwm_ef node in P212 dtsi
  arm64: dts: meson: add Broadcom WiFi to P212 dtsi
  arm64: dts: amlogic: meson-g12b-odroid-go-ultra: fix rk818 pmic properties
  arm64: dts: amlogic: meson-gxbb-kii-pro: fix led node name
  arm64: dts: amlogic: meson-gxl-s905d-phicomm-n1: fix led node name
  ...

Link: https://lore.kernel.org/r/c1641ffd-71c9-9ac9-89d9-c22da4acea10@linaro.org


Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'imx-dt64-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/dt

i.MX arm64 device tree change for 6.3:

- New board support: i.MX8MP Beacon Kit, Debix Model A Board,
  Verdin Yavia boards.
- Add Flexcan and ADC support for i.MX93.
- A series from Krzysztof Kozlowski to align LED node names with
  dtschema and use generic node name for rave-sp.
- Move PCIe controller clock setup from board dts to SoC dtsi.
- Add clock-cells to i.MX8MP hsio-blk-ctrl device.
- Add TMU phandle to calibration data in OCOTP for i.MX8M.
- Improve bluetooth UART on DH electronics i.MX8M Plus DHCOM.
- Drop sd-vsel-gpios from i.MX8M Verdin SoM and DHCOM SoM.
- A series from Peng Fan to improve iomuxc-gpr device for i.MX8M.
- Declare IOMMU cache-coherent page table walk feature for LS1028A and
  LS1088A.
- A few small corrections and random updates.

* tag 'imx-dt64-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (50 commits)
  arm64: ls1046ardb: Use in-band-status for SFP module
  arm64: dts: imx8mp-verdin: Add yavia carrier board
  arm64: dts: imx8mm-verdin: Add yavia carrier board
  arm64: dts: imx8q: use generic node name for rave-sp
  arm64: dts: imx8mp-verdin-dev: Do not include dahlia dtsi
  arm64: dts: imx8mm-verdin-dev: Do not include dahlia dtsi
  arm64: dts: imx8mp: Drop sd-vsel-gpios from i.MX8M Plus DHCOM SoM
  arm64: dts: imx8mp: Drop sd-vsel-gpios from i.MX8M Plus Verdin SoM
  arm64: dts: imx8mm: Drop sd-vsel-gpios from i.MX8M Mini Verdin SoM
  arm64: dts: imx8mp: Improve bluetooth UART on DH electronics i.MX8M Plus DHCOM
  arm64: dts: freescale: Introduce imx8mp-beacon-kit
  arm64: dts: imx8mm-evk: use correct gpio-expander compatible
  arm64: dts: imx93: add ADC support
  arm64: dts: imx8mp: Reorder clock to match fsl,imx6q-pcie.yaml
  arm64: dts: imx8mq: Deduplicate PCIe clock-names property
  arm64: dts: imx8mm: Deduplicate PCIe clock-names property
  arm64: dts: verdin-imx8mp: unify gpio-key node name
  arm64: dts: ls1028a: sl28: get MAC addresses from VPD
  arm64: dts: freescale: Add LVDS overlay for TQMa8MPxL
  arm64: dts: imx8mp: Add LCDIF2 & LDB nodes
  ...

Link: https://lore.kernel.org/r/20230130023947.11780-5-shawnguo@kernel.org


Signed-off-by: Arnd Bergmann <arnd@arndb.de>

i.MX arm device tree change for 6.3:

- New board support: SK-iMX53, DHCOM i.MX6ULL based boards.
- Increase MMC maximum frequency for i.MXRT1050.
- A series from Krzysztof Kozlowski to align LED node names with
  dtschema, and use use generic node name for rave-sp device.
- Use new media bus type macros for i.MX device trees.
- A series from Marcel Ziswiler to improve gpio-key for Colibri and
  Apalis device trees.
- A series from Marek Vasut to drop interrupt-names from dma-apb device.
- A series from Philippe Schenker to disable USB over-current for
  Colibri and Apalis boards.
- A few other small corrections and random changes.

* tag 'imx-dt-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (29 commits)
  ARM: dts: imx6ull-dhcom: Add DHSOM based DRC02 board
  ARM: dts: imx6ull-dhcom: Add DHCOM based PicoITX board
  ARM: dts: imx6ull-dhcom: Add DH electronics DHCOM i.MX6ULL SoM and PDK2 board
  ARM: dts: imx7s: correct iomuxc gpr mux controller cells
  ARM: dts: imx: use generic node name for rave-sp
  ARM: dts: ls1021a: Disable CAN nodes by default
  ARM: dts: apalis/colibri-imx6/6ull/7: proper gpio-key node names
  ARM: dts: colibri-imx6ull: improve wake-up with gpio key
  ARM: dts: colibri-imx6: improve wake-up with gpio key
  ARM: dts: imx: e70k02: Add touchscreen
  ARM: dts: vfxxx: Swap SAI DMA order
  ARM: dts: freescale: Use new media bus type macros
  ARM: dts: tqma6ul + mba6ulx: Fix temperature sensor compatible
  ARM: dts: imx: Add support for SK-iMX53 board
  ARM: dts: imx7s: Drop dma-apb interrupt-names
  ARM: dts: imx6ul: Drop dma-apb interrupt-names
  ARM: dts: imx6sx: Drop dma-apb interrupt-names
  ARM: dts: imx6qdl: Drop dma-apb interrupt-names
  ARM: dts: mxs: Drop dma-apb interrupt-names
  ARM: dts: imx6qdl: use MAC-address from nvmem
  ...

Link: https://lore.kernel.org/r/20230130023947.11780-4-shawnguo@kernel.org


Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'imx-bindings-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/dt

i.MX DT bindings for 6.3:

- New board compatibles: Beacon EmbeddedWorks i.MX8M Plus kit,
  DHCOM PDK2, PicoITX and DRC02, Enumerate Debix, Starterkit SK-iMX53,
  verdin yavia carrier-board.
- Add vendor prefix for Polyhex Technology Co.
- A series from Krzysztof Kozlowski to fix up fsl,imx-gpc bindings.
- Add clock cells for imx8mp-hsio-blk-ctrl bindings.
- A series from Marek Vasut to shuffle i.MX8MM board entries.
- A couple changes from Stefan Wahren to update compatibles for i.MX28
  based boards.

* tag 'imx-bindings-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
  dt-bindings: arm: fsl: Add verdin yavia carrier-board
  dt-bindings: arm: fsl: Add PDK2, PicoITX and DRC02 boards for the DHCOM i.MX6ULL SoM
  dt-bindings: arm: Document the rest of i.MX28 based boards
  dt-bindings: arm: fsl: Fix bindings for APF28Dev board
  dt-bindings: power: fsl,imx-gpc: document interrupt-controller
  dt-bindings: power: fsl,imx-gpc: correct compatibles
  dt-bindings: power: fsl,imx-gpc: document fsl,imx6ul-gpc compatible
  dt-bindings: arm: Add Beacon EmbeddedWorks i.MX8M Plus kit
  dt-bindings: arm: Move i.MX8MM Cloos PHG Board to TQM entry
  dt-bindings: arm: Split i.MX8M Plus DHCOM based boards
  dt-bindings: arm: Split i.MX8M Mini NITROGEN SoM based boards
  dt-bindings: arm: Move MX8Menlo board to i.MX8M Mini Toradex Verdin SoM entry
  dt-bindings: soc: imx: add IOMUXC GPR support
  dt-bindings: arm: fsl: Add the Starterkit SK-iMX53 board
  dt-bindings: vendor-prefixes: add Startkit
  dt-bindings: soc: imx8mp-hsio-blk-ctrl: add clock cells
  dt-bindings: arm: fsl: Enumerate Debix Model A Board
  dt-bindings: vendor-prefixes: Add Polyhex Technology Co.

Link: https://lore.kernel.org/r/20230130023947.11780-3-shawnguo@kernel.org


Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'dt-cleanup-6.3-2' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux-dt into arm/dt

Minor improvements in ARM DTS for v6.3, part two

Align UART node names and OPP table names with bindings (alpine, arm
boards, axm55xx, berlin, cx92755, dm814x, moxart, mstar, stih418).

* tag 'dt-cleanup-6.3-2' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux-dt:
  ARM: dts: berlin: align UART node name with bindings
  ARM: dts: stih418: align OPP table names with DT schema
  ARM: dts: dm814x: align UART node name with bindings
  ARM: dts: moxart: align UART node name with bindings
  ARM: dts: axm55xx: align UART node name with bindings
  ARM: dts: alpine: align UART node name with bindings
  ARM: dts: arm: align UART node name with bindings
  ARM: dts: cx92755: align UART node name with bindings
  ARM: dts: mstar: align UART node name with bindings

Link: https://lore.kernel.org/r/20230129144525.5802-2-krzysztof.kozlowski@linaro.org


Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'dt64-cleanup-6.3-2' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux-dt into arm/dt

Minor improvements in ARM64 DTS for v6.3, part two

1. Drop deprecated "device_type" property from serial nodes (apm,
   amazon).
2. Align UART node names and OPP table names with bindings (hisilicon,
   realtek, synaptics).
3. Use "okay" for status, as expected by Devicetree specification and
   dtschema.

* tag 'dt64-cleanup-6.3-2' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux-dt:
  arm64: dts: amd: use "okay" for status
  arm64: dts: apm: use "okay" for status
  arm64: dts: microchip: use "okay" for status
  arm64: dts: synaptics: align UART node name with bindings
  arm64: dts: hisilicon: align UART node name with bindings
  arm64: dts: realtek: align UART node name with bindings
  arm64: dts: amazon: drop deprecated serial device_type
  arm64: dts: apm: drop deprecated serial device_type

Link: https://lore.kernel.org/r/20230129144525.5802-1-krzysztof.kozlowski@linaro.org


Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'samsung-dt64-6.3-2' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into arm/dt

Samsung DTS ARM64 changes for v6.3, part two

Big cleanup and rework towards achieving zero-warning of dtbs_check and
dtc W=1:
 - drop or correct incorrect properties in several boards,
 - add dummy regulator supplies when necessary to fullfil bindings
   requirements,
 - use lowercase hex,
 - move non-MMIO exynos-bus nodes out of soc node,
 - add unit address to USB DWC3 nodes.

* tag 'samsung-dt64-6.3-2' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
  arm64: dts: exynos: add unit address to DWC3 node wrapper in Exynos7
  arm64: dts: exynos: add unit address to DWC3 node wrapper in Exynos5433
  arm64: dts: exynos: move exynos-bus nodes out of soc in Exynos5433
  arm64: dts: exynos: use lowercase hex addresses
  arm64: dts: exynos: correct wlf,micd-dbtime on TM2
  arm64: dts: exynos: add interrupt-controller to WM5110 on TM2
  arm64: dts: exynos: add VPH_PWR regulator on TM2
  arm64: dts: exynos: correct Bluetooth LED triger on E850-96
  arm64: dts: exynos: add ADC supply on Exynos7 Espresso
  arm64: dts: exynos: disable non-working GPU on Exynos7 Espresso
  arm64: dts: exynos: drop unsupported UFS properties in ExynosAutov9 SADK

Link: https://lore.kernel.org/r/20230129143944.5104-2-krzysztof.kozlowski@linaro.org


Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'samsung-dt-6.3' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into arm/dt

Samsung DTS ARM changes for v6.3

1. Big cleanup and rework towards achieving zero-warning of dtbs_check
   and dtc W=1:
    - align node names with the bindings,
    - drop or correct incorrect properties in several boards,
    - correct HDMI bridge ports nodes on Exynos4412 Midas,
    - add dummy regulator supplies when necessary to fullfil bindings
      requirements,
    - use lowercase hex,
    - move non-MMIO exynos-bus nodes out of soc node,
    - add unit address to USB DWC3 nodes.

2. Correct Exynos5420 MIPI DSI and phy compatibles.
3. Correct Exynos4210 and Exynos4412 HDMI phy compatibles.
4. Add Samsung Galaxy S5 (SM-G900H) board.

* tag 'samsung-dt-6.3' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux: (27 commits)
  ARM: dts: exynos: add unit address to DWC3 node wrapper in Exynos54xx
  ARM: dts: exynos: add unit address to DWC3 node wrapper in Exynos5250
  ARM: dts: exynos: move exynos-bus nodes out of soc in Exynos4412
  ARM: dts: exynos: move exynos-bus nodes out of soc in Exynos4210
  ARM: dts: exynos: move exynos-bus nodes out of soc in Exynos3250
  ARM: dts: exynos: move exynos-bus nodes out of soc in Exynos5420
  ARM: dts: exynos: use lowercase hex addresses
  ARM: dts: exynos: use generic node names for phy
  ARM: dts: exynos: correct HDMI phy compatible in Exynos4
  ARM: dts: exynos: Add Samsung Galaxy S5 (SM-G900H) board
  dt-bindings: arm: samsung: Add compatible for Samsung Galaxy S5 (SM-G900H)
  ARM: dts: exynos: Use Exynos5422 compatible for the DSI controller
  ARM: dts: exynos: Use Exynos5420 compatible for the MIPI video phy
  ARM: dts: exynos: correct HSI2C properties in Exynos5410 Odroid XU
  ARM: dts: exynos: correct HS200 property in Exynos5260
  ARM: dts: exynos: correct SATA clocks in Exynos5250
  ARM: dts: exynos: align HSOTG/USB node names
  ARM: dts: exynos: add backlight supply in P4 Note
  ARM: dts: exynos: add panel supply in Tiny4412
  ARM: dts: exynos: add ports in HDMI bridge in Exynos4412 Midas
  ...

Link: https://lore.kernel.org/r/20230129143944.5104-1-krzysztof.kozlowski@linaro.org


Signed-off-by: Arnd Bergmann <arnd@arndb.de>

This pull request contains Broadcom ARM64 SoCs Device Tree updates for
6.3, please pull the following:

- Krzysztof aligns the SMMMU Device Tree nodes to use the desired
  regular expression matched by the dtschema and he also removes the
  deprecated "device_type" property for serial node(s)

* tag 'arm-soc/for-6.3/devicetree-arm64' of https://github.com/Broadcom/stblinux:
  arm64: dts: broadcom: drop deprecated serial device_type
  arm64: dts: broadcom: align SMMU node names with DT schema

Link: https://lore.kernel.org/r/20230128193834.1628831-1-f.fainelli@gmail.com


Signed-off-by: Arnd Bergmann <arnd@arndb.de>

This pull request contains Broadcom ARM SoCs Device Tree updates for
6.3, please pull the following:

- Krzysztof aligns the various Broadcom SoCs DTS UART nodes with the
  binding convention to use "serial"

* tag 'arm-soc/for-6.3/devicetree' of https://github.com/Broadcom/stblinux:
  ARM: dts: broadcom: align UART node name with bindings

Link: https://lore.kernel.org/r/20230128193829.1628773-1-f.fainelli@gmail.com


Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'sunxi-dt-for-6.3-1' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into arm/dt

- introduce Allwinner D1 DTSI
- add boards: Dongshan Nezha STU, MangoPi MQ (Pro), Sipeed Lichee RV,
  Nezha
- add D1 power controller node
- Add SATA regulator to Bananapi M3
- fix regulator reference for nanopi-duo2
- fix GPIO node names
- align HDMI CEC node name for h3-beelink-x2
- add DPHY interrupt to A64 and A33

* tag 'sunxi-dt-for-6.3-1' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux

:
  riscv: dts: allwinner: d1: Add power controller node
  riscv: Add the Allwinner SoC family Kconfig option
  riscv: dts: allwinner: Add Dongshan Nezha STU devicetree
  riscv: dts: allwinner: Add MangoPi MQ Pro devicetree
  riscv: dts: allwinner: Add Sipeed Lichee RV devicetrees
  riscv: dts: allwinner: Add Allwinner D1 Nezha devicetree
  riscv: dts: allwinner: Add MangoPi MQ devicetree
  riscv: dts: allwinner: Add the D1/D1s SoC devicetree
  dt-bindings: riscv: Add Allwinner D1/D1s board compatibles
  dt-bindings: vendor-prefixes: Add Allwinner D1/D1s board vendors
  MAINTAINERS: Match the sun20i family of Allwinner SoCs
  ARM: dts: sun8i: a83t: bananapi-m3: describe SATA disk regulator
  ARM: dts: sun8i: nanopi-duo2: Fix regulator GPIO reference
  ARM: dts: sunxi: Fix GPIO LED node names
  ARM: dts: sun8i: h3-beelink-x2: align HDMI CEC node names with dtschema
  arm64: dts: allwinner: a64: Add DPHY interrupt
  ARM: dts: sun8i: a33: Add DPHY interrupt

Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'tegra-for-6.3-arm64-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into arm/dt

arm64: tegra: Device tree changes for v6.3-rc1

There are two big changes in this: one is to bump the #address-cells and
the #size-cells properties to 2 so that bus address translations work
correctly and another to sort nodes according to a scheme that we've
been trying to follow, but where some inconsistencies have accumulated
over the years.

As for the rest, this adds mostly new things on Tegra234, such as USB
host and device support and identification EEPROMs found on Jetson AGX
Orin.

Some cleanups are also included, such as the removal of unneeded
properties or duplicated nodes.

* tag 'tegra-for-6.3-arm64-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
  arm64: tegra: Drop I2C iommus and dma-coherent properties
  arm64: tegra: Mark host1x as dma-coherent on Tegra194/234
  arm64: tegra: Populate the XUDC node for Tegra234
  arm64: tegra: Add dma-coherent property for Tegra194 XUDC
  arm64: tegra: Populate Jetson AGX Orin EEPROMs
  arm64: tegra: Populate address/size cells for Tegra234 I2C
  arm64: tegra: Enable XUSB host function on Jetson AGX Orin
  arm64: tegra: Sort nodes by unit-address, then alphabetically
  arm64: tegra: Bump #address-cells and #size-cells
  arm64: tegra: Sort includes
  arm64: tegra: Fix duplicate regulator on Jetson TX1
  arm64: tegra: Fix typo in gpio-ranges property

Link: https://lore.kernel.org/r/20230127163719.460954-3-thierry.reding@gmail.com


Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'tegra-for-6.3-arm-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into arm/dt

ARM: tegra: Device tree changes for v6.3-rc1

Just a single patch to properly sort nodes and make the DTS files easier
to read.

* tag 'tegra-for-6.3-arm-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
  ARM: tegra: Sort nodes by unit-address, then alphabetically

Link: https://lore.kernel.org/r/20230127163719.460954-2-thierry.reding@gmail.com


Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'tegra-for-6.3-dt-bindings' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into arm/dt

dt-bindings: Changes for v6.3-rc1

Device tree files for 64-bit ARM Tegra SoCs have recently had to bump
the #address-cells and #size-cells to 2 in order to support bus address
translations across the entire device tree hierarchy. Explicitly allow
this in DT schemas to prevent validation errors.

* tag 'tegra-for-6.3-dt-bindings' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
  dt-bindings: tegra: Allow #{address,size}-cells = <2>

Link: https://lore.kernel.org/r/20230127163719.460954-1-thierry.reding@gmail.com


Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'renesas-dts-for-v6.3-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into arm/dt

Renesas DT updates for v6.3 (take two)

  - High Performance mode (1.8 GHz) support for the Cortex-A76 CPU cores
    on R-Car V4H,
  - GPIO interrupt support for the RZ/G2UL SoC and the RZ/G2UL SMARC EVK
    development board,
  - USB Function support for the RZ/N1D SoC,
  - Generic Sound Card driver examples for the Renesas R-Car Starter Kit
    Premier/Pro and Shimafugi Kingfisher development board stack,
  - Universal Flash Storage support for the Renesas Spider development
    board,
  - External Power Sequence Controller (PWC) support for the RZ/V2M SoC
    and the RZ/V2M Evaluation Kit 2.0,
  - IOMMU support for MMC on the R-Car S4-8 SoC,
  - Miscellaneous fixes and improvements.

* tag 'renesas-dts-for-v6.3-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel: (25 commits)
  arm64: dts: renesas: r8a779f0: Add iommus to MMC node
  arm64: dts: renesas: v2mevk2: Add PWC support
  arm64: dts: renesas: r9a09g011: Add PWC support
  arm64: dts: renesas: r9a09g011: Reword ethernet status
  arm64: dts: renesas: r8a774[be]1-beacon: Sync aliases with RZ/G2M
  arm64: dts: renesas: beacon-renesom: Fix audio clock rate
  arm64: dts: renesas: beacon-renesom: Update Ethernet PHY ID
  arm64: dts: renesas: beacon-renesom: Fix gpio expander reference
  arm64: dts: renesas: spider-cpu: Enable UFS device
  arm64: dts: renesas: Add ulcb{-kf} Simple Audio Card MIX + TDM Split dtsi
  arm64: dts: renesas: Add ulcb{-kf} Audio Graph Card MIX + TDM Split dtsi
  arm64: dts: renesas: Add ulcb{-kf} Audio Graph Card2 MIX + TDM Split dtsi
  arm64: dts: renesas: Add ulcb{-kf} Simple Audio Card dtsi
  arm64: dts: renesas: Add ulcb{-kf} Audio Graph Card2 dtsi
  arm64: dts: renesas: Add ulcb{-kf} Audio Graph Card dtsi
  arm64: dts: renesas: #sound-dai-cells is used when simple-card
  ARM: dts: renesas: #sound-dai-cells is used when simple-card
  arm64: dts: renesas: eagle: Add SCIF_CLK support
  ARM: dts: r9a06g032: Add the USBF controller node
  arm64: dts: renesas: rzg2ul-smarc-som: Add PHY interrupt support for ETH{0/1}
  ...

Link: https://lore.kernel.org/r/cover.1674815099.git.geert+renesas@glider.be


Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'renesas-dt-bindings-for-v6.3-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into arm/dt

Renesas DT binding updates for v6.3

  - Document support for the Renesas RZ/V2M External Power Sequence
    Controller (PWC).

* tag 'renesas-dt-bindings-for-v6.3-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel:
  dt-bindings: soc: renesas: Add RZ/V2M PWC

Link: https://lore.kernel.org/r/cover.1674815097.git.geert+renesas@glider.be


Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'qcom-arm64-for-6.3' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/dt

Qualcomm ARM64 Devicetree updates for v6.3

This introduces support for the new Snapdragon 8 Gen 2 (SM8550)
platform.  In addition to the adding support for the MTP on this
platform, support the following devices is introduced:
 - GPLUS FL8005A
 - Google Zombie with LTE and NVMe
 - Google Zombie with NVMe
 - Lenovo Tab P11
 - Motorola G5 Plus
 - Motorola G7 Power
 - Motorola Moto G6
 - Samsung Galaxy J5 (2016)
 - Samsung Galaxy Tab A 8.0
 - Samsung Galaxy Tab A 9.7
 - Xiaomi Mi A1
 - Xiaomi Mi A2 Lite
 - Xiaomi Redmi 5 Plus
 - Xiaomi Redmi Note 4X

On IPQ8074 the PCIe PHY register regions and PHY clock names are
corrected.

On MSM8916 DMA for the I2C controllers are introduced and blsp_dma is
unconditionally enabled. Per-sensor calibration data is provided for the
thermal sensor (tsens) block. The GPLUS FL8005A device is introduced and
gains support for touchscreen and flash LED. An additional Samsung
Galaxy J5 variant is added, and support is added for hall sensor and
MUIC.

Per-sensor calibration information is introduced for the thermal sensor
on MSM8956 as well.

On MSM8996, GPLL0 is added as a possible Kryo clock controller input, a
carveout is added to get modem metadata out of System RAM. Missing bus
clocks are added for agnoc2.
SDHCI1 is enabled on the Sony Xperia Tone platform and USB is limited to
high-speed, to make USB work.

MSM8998 gains the same modem carveout as other platforms, and the
description of the clock hierarchy is improved.

On QCS404 the clock hierarchy description is improved, the CDSP PAS node
is adjusted to match the binding and the thermal sensor (tsens) gains
per-sensor calibration information.

On SC7180 the Data Capture and Compare block is intorduced, and a
carveout for the modem metadata is introduced, to get this out of System
RAM. Pazquel360 gains touchscreen support, the regulator off-on-time is
adjusted for the Trogdor eDP and touchscreen.
Data lane and frequency properties are introduced for the DisplayPort
links.

SC7280 also gets Data Capture and Compare support, as well as the
dedicated modem metadata region. Herobrine gains DP audio support.
IPA description is updated so that it's only active on boards with a
modem.

On SC8280XP the display subsystem is introduced, currently with support
for most of the DisplayPort controllers. GPR, SoundWire and LPASS is
introduced, for audio support. Missing I2C and SPI controllers are
introduced.
Support for EDP is introduced for the CRD, the Lenovo ThinkPad X13s and
the SA8295P ADP automotive board. The SA8540P Ride platform enables one
i2c and pcie controllers.
A CMA region is defined for the CRD and X13s, to avoid allocation issues
from the NVMe support.

Fairphone FP3 gains NFC support and the Sony Xperia Nile platform gains
a description of simplefb.
SDM670 gains QFPROM definition.

SDM845 gains a carveout for the modem metadata and support for the Data
Capture and Compare block is introduced.  Lenovo Yoga C630 firmware
paths are aligned with all other Qualcomm platforms.

On SM6125 apss SMMU is introduced and streams are defined for USB and
SDHCI controllers. GPI DMA description is introduced, as well as missing
SPI and I2C serial engines.
On Sony Xperia 10 IIa regulator definitions are improved, SDHCI2 is
introduced, and I2C and related GPI DMA blocks are enabled.

On SM6350 IPA is introduced. DDR and L3 scaling is introduced based on
CPUfreq.

Fairphone FP4, on SM7225 also has IPA enabled, and the Flash LED is
enabled as well.

On SM8150 the display subsystem is introduced, with clock controller,
DPU and two DSI controllers. The Data Capture and Compare block is
introduced.
For the Sony Xperia Kumano platform, GPIO keys and NFC support is
introduced.

For SM8350 PCIe is introduced, as is the display subsystem with display
clock controller, DPU and two DSI controllers. #interconnect-cells is
changed to 2, to align with other platforms and allow for active-only
votes. The display is enabled and the LT9611uxc found on the SM8350
Hardware Development Kit board is described, to provide HDMI output.

On SM8450 the display subsystem is introduced, with DPU and two DSI
controllers.  GIC-ITS support is introduced for both PCIe0 and PCIe1.
SPMI bus support is introduced and pmics are wired up across the various
devices.
The display subsystem is enabled and the LT9611uxc is described to
provide HDMI output on the SM8450 Hardware Development Kit.
On Sony Xperia Nagara platform, GPIO keys and GPIO line names are
introduced. As is the SLG51000 PMIC and camera regulators are defined.

Support for SM8550 is introduced, with support for storage, USB,
remoteprocs, PCIe, low-speed buses, crypto and display subsystem. These
blocks are enabled on the MTP.

Lastly, the work continue to align Devicetree source with bindings
across all platforms.

* tag 'qcom-arm64-for-6.3' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (320 commits)
  arm64: dts: qcom: sc7280: Add a carveout for modem metadata
  arm64: dts: qcom: sc7180: Add a carveout for modem metadata
  arm64: dts: qcom: sdm845: Add a carveout for modem metadata
  arm64: dts: qcom: msm8998: Add a carveout for modem metadata
  arm64: dts: qcom: msm8996: Add a carveout for modem metadata
  arm64: dts: qcom: ipq8074: correct PCIe QMP PHY output clock names
  arm64: dts: qcom: ipq8074: fix Gen3 PCIe node
  arm64: dts: qcom: ipq8074: set Gen2 PCIe pcie max-link-speed
  arm64: dts: qcom: ipq8074: correct Gen2 PCIe ranges
  arm64: dts: qcom: ipq8074: fix Gen3 PCIe QMP PHY
  arm64: dts: qcom: ipq8074: fix Gen2 PCIe QMP PHY
  arm64: dts: qcom: sdm845-db845c: drop label from I2C controllers
  arm64: dts: qcom: msm8996: support using GPLL0 as kryocc input
  arm64: dts: qcom: sm8450: Allow both GIC-ITS and internal MSI controller
  arm64: dts: qcom: sm8550-mtp: Add USB PHYs and HC nodes
  arm64: dts: qcom: sm8550: Add USB PHYs and controller nodes
  arm64: dts: qcom: sm8250: drop unused properties from tx-macro
  arm64: dts: qcom: sm8250: drop unused clock-frequency from wsa-macro
  arm64: dts: qcom: align OPP table node name with DT schema
  arm64: dts: qcom: rename mdp nodes to display-controller
  ...

Link: https://lore.kernel.org/r/20230126202528.3691539-1-andersson@kernel.org


Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'riscv-dt-for-v6.3-mw0' of https://git.kernel.org/pub/scm/linux/kernel/git/conor/linux

 into arm/dt

RISC-V Devicetrees for v6.3-mw0

Microchip:
A vendor prefix for Aldec and both a binding and Devicetree for the
Aldec TySoM devkit for PolarFire SoC. This Devicetree corresponds to
what they are shipping in the SDK for rev2 boards.

StarFive:
Just the binding for the new StarFive JH7110 SoC and its first-party
SDC the VisionFive 2.

Other:
I was expecting the Devicetree for the aforementioned board to be ready
for this window, as the pinctrl driver had seem some review prior to
v6.2 and both it & the base clock drivers are heavily based on the
existing drivers for the JH7110.
That didn't come to be.. Christmas, the RISC-V Summit in December and
the Lunar New Year all playing a part perhaps.
Because of that, both Palmer and I have the Kconfig.socs work in our
branches, although in hindsight it probably wasn't needed here as I
only added the TySoM Devicetree & the conflict would've been trivial.

Signed-off-by: Conor Dooley <conor.dooley@microchip.com>

* tag 'riscv-dt-for-v6.3-mw0' of https://git.kernel.org/pub/scm/linux/kernel/git/conor/linux:
  riscv: dts: microchip: add the Aldec TySoM's devicetree
  dt-bindings: riscv: microchip: document the Aldec TySoM
  dt-bindings: vendor-prefixes: Add entry for Aldec
  RISC-V: stop directly selecting drivers for SOC_CANAAN
  RISC-V: stop selecting SiFive clock and serial drivers directly
  RISC-V: stop selecting the PolarFire SoC clock driver
  RISC-V: kbuild: convert all use of SOC_FOO to ARCH_FOO
  RISC-V: kconfig.socs: convert usage of SOC_CANAAN to ARCH_CANAAN
  RISC-V: introduce ARCH_FOO kconfig aliases for SOC_FOO symbols
  dt-bindings: riscv: Add StarFive JH7110 SoC and VisionFive 2 board

Link: https://lore.kernel.org/r/Y9LP+Za1h0fkBa58@spud


Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'qcom-dts-for-6.3' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/dt

Qualcomm ARM DT updates for v6.3

This introduces support for Acer Iconia Talk S A1-724

The Samsung Galaxy Tab 4 10.1 gains ADSP and backlight support.

The Xperia Z2 Tablet gets charging enabled and the touchscreen is given
a little bit more time to start up.

APQ8064 and MSM8974 gains improvements in clock hierarchy. APQ8064
thermal sensor (tsens) driver gains per-censor calibration data.

Lastly a set of patches that improves DT binding compliance.

* tag 'qcom-dts-for-6.3' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (50 commits)
  ARM: dts: qcom: msm8226: add RPMCC node
  ARM: dts: qcom: apq8084: add clocks and clock-names to gcc device
  ARM: dts: qcom: align OPP table node name with DT schema
  ARM: dts: qcom: rename mdp nodes to display-controller
  ARM: dts: qcom-msm8974: rename mdss node to display-subsystem
  ARM: dts: qcom-msm8974: add SoC specific compat string to mdp5 node
  dt-bindings: qcom: Document samsung,gt58 and gt510
  dt-bindings: qcom: Document bindings for msm8916-samsung-j5x
  ARM: dts: qcom: use qcom,gsi-loader for IPA
  ARM: dts: qcom-apq8084: specify per-sensor calibration cells
  ARM: dts: qcom-msm8974: specify per-sensor calibration cells
  dt-bindings: arm: qcom: Document MSM8939 SoC binding
  ARM: dts: qcom: msm8974: add xo clock to rpm clock controller
  dt-bindings: qcom: Document msm8916-gplus-fl8005a
  dt-bindings: vendor-prefixes: Add GPLUS
  ARM: dts: qcom: apq8026-samsung-matisse-wifi: Add display backlight
  dt-bindings: arm: qcom: Add SM6115(P) and Lenovo Tab P11
  ARM: dts: qcom: add missing space before {
  dt-bindings: arm: qcom: add board-id/msm-id for MSM8956, SDM636 and SM4250
  dt-bindings: arm: qcom: Add zombie with NVMe
  ...

Link: https://lore.kernel.org/r/20230126174725.3681745-1-andersson@kernel.org


Signed-off-by: Arnd Bergmann <arnd@arndb.de>

net10 is connected to an SFP module. Unfortunately, the I2C lines are
not connected due to an address conflict. Now that DPAA uses phylink, we
can use in-band-status. This lets us determine whether the link is up or
down instead of assuming it is up all the time. Also fix the phy mode
while we're here.

Signed-off-by: Sean Anderson <sean.anderson@seco.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

Add new carrier board device tree Yavia for the Verdin iMX8M Plus SoM.

Yavia is a compact carrier board providing easy access to the most
common features of the Verdin family. The intended use of the carrier
board is application software development. The board is compatible with
all current and future Verdin SoMs.

Co-developed-by: Aishwarya Kothari <aishwarya.kothari@toradex.com>
Signed-off-by: Aishwarya Kothari <aishwarya.kothari@toradex.com>
Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

Add new carrier board device tree Yavia for the Verdin iMX8M Mini SoM.

Yavia is a compact carrier board providing easy access to the most
common features of the Verdin family. The intended use of the carrier
board is application software development. The board is compatible with
all current and future Verdin SoMs.

Co-developed-by: Aishwarya Kothari <aishwarya.kothari@toradex.com>
Signed-off-by: Aishwarya Kothari <aishwarya.kothari@toradex.com>
Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>