Merge tag 'asoc-v3.15-rc5-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus

ASoC: Driver fixes for v3.15

A small set of driver fixes, nothing remarkable in itself or of any
relevance outside of the driver.

Merge tag 'asoc-v3.15-rc5-core' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus

ASoC: Core fixes for v3.15

A few things here:

 - Fix the creation of spurious CODEC<->CODEC links which caused DAPM to
   have audio paths which shouldn't be present causing spurious powerups
   and potential audible issues for users.
 - Ensure the suspend->off transition doesn't have spurious transitions
   to prepare added to the sequence.
 - Fix incorrect skipping of PCM suspension for active audio streams.
 - Remove Timur Tabi from the CS4270 maintainers, Cirrus are now doing
   this and Timur no longer has the boards that he was using.

Merge remote-tracking branches 'asoc/fix/audmux', 'asoc/fix/cs42l52', 'asoc/fix/fsl-esai', 'asoc/fix/fsl-spdif', 'asoc/fix/rcar', 'asoc/fix/tlv320aic31xx' and 'asoc/fix/wm8962' into asoc-linus

The register CLASS_D_CONTROL_1 is marked as volatile because it contains
a bit, DAC_MUTE, which is also mirrored in the ADC_DAC_CONTROL_1
register. This causes problems for the "Speaker Switch" control, which
will report an error if the CODEC is suspended because it relies on a
volatile register.

To resolve this issue mark CLASS_D_CONTROL_1 as non-volatile and
manually keep the register cache in sync by updating both bits when
changing the mute status.

Reported-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Tested-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Mark Brown <broonie@linaro.org>
Cc: stable@vger.kernel.org

Broadwell display controller has 3 stream DMA engines. DMA0 cannot update DMA
postion buffer properly while DMA1 and DMA2 can work well. So this patch masks
the buggy DMA0 by keeping it as opened.

This is a tentative workaround, so keep the change small as Takashi suggested.

Signed-off-by: Mengdong Lin <mengdong.lin@intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Vendor ID 0x10de0071 is used by a yet-to-be-named GPU chip.

Signed-off-by: Aaron Plattner <aplattner@nvidia.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

According to Reference Manual -- ESAI Initialization chapter, as the
standard procedure of ESAI personal reset, the PCRC and PRRC registers
should be remained in its reset value and then configured after T/RCCR
and T/RCR configurations's done but before TE/RE's enabling.

So this patch moves PCRC and PRRC settings to the end of hw_params().

Signed-off-by: Nicolin Chen <Guangyu.Chen@freescale.com>
Signed-off-by: Mark Brown <broonie@linaro.org>

ESAI can only output EXTAL clock source directly. But for FSYS clock source,
ESAI can not output it without getting through PSR PM dividers.

So this patch adds an extra check in the code.

Signed-off-by: Nicolin Chen <Guangyu.Chen@freescale.com>
Signed-off-by: Mark Brown <broonie@linaro.org>

The range here from 1 to 16 is confined to FP divider only while the
sck_div indicates if the calculation contains PSR and PM dividers. So
for the case using PSR and PM since the sck_div is true, the range of
ratio would simply become bigger than 16.

So this patch fixes the condition here and adds one line comments to
make the purpose here clear.

Signed-off-by: Nicolin Chen <Guangyu.Chen@freescale.com>
Signed-off-by: Mark Brown <broonie@linaro.org>

Currently when the DAPM context bias level is SUSPEND and the target bias level
is OFF dapm_pre_sequence_async() will first transition to PREPARE and
dapm_post_sequence_async() will then transition back from PREPARE to STANDBY and
then to OFF.

This patch makes sure that dapm_pre_sequence_async() only transitions to PREPARE
when either going to ON or away from ON. This avoids the extra unnecessary
transitions.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@linaro.org>

For CODEC to CODEC DAI links the paths are created in snd_soc_dapm_new_pcm().
Also for CODEC to CODEC links the widgets are connected cross-over via a DAI
link widget, meaning that the capture widget of one CODEC will be connected to
the playback widget of the other and vice versa. Whereas
snd_soc_dapm_connect_dai_link_widgets() directly connects the playback widget of
the CPU DAI to the playback widget of the CODEC DAI and the capture widget of
the CPU DAI to the capture widget of the CODEC DAI. So not skipping
CODEC<->CODEC links in snd_soc_dapm_connect_dai_link_widgets() will create
incorrect connections between the two CODECs which will cause DAPM to detect
active paths where there are none and unnecessarily power up widgets.

Fixes: b893ea5f

 ("ASoC: sapm: Automatically connect DAI link widgets in DAPM graph.")
Cc: <stable@vger.kernel.org> (for 3.14+)
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@linaro.org>

The regular state before we execute SNDRV_PCM_TRIGGER_SUSPEND should be
SNDRV_PCM_TRIGGER_START, not SNDRV_PCM_TRIGGER_STOP. Thus fix it.

Signed-off-by: Nicolin Chen <Guangyu.Chen@freescale.com>
Signed-off-by: Mark Brown <broonie@linaro.org>

When we plug a 3-ring headset on the Dell machines (VID: 0x10ec0255,
SID: 0x1028065c; VID: 0x10ec0255, SID: 0x10280680; VID: 0x10ec0292,
SID: 0x10280684), the headset mic can't be detected, after apply this
patch, the headset mic can work well.

And on the machine with SID 0x10280684, and the Lineout and external
microphone should be routed to docking, this patch also fix this
problem.

BugLink: https://bugs.launchpad.net/bugs/1297581


Cc: David Henningsson <david.henningsson@canonical.com>
Cc: stable@vger.kernel.org
Signed-off-by: Hui Wang <hui.wang@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Remove Timur Tabi as maintainer for CS4270 codec. I would like to thank Timur
for his work on maintaining this driver.

Signed-off-by: Paul Handrigan <paul.handrigan@cirrus.com>
Signed-off-by: Mark Brown <broonie@linaro.org>

Since commit 1df5a06a

 ("ALSA: hda - hdmi: Fix programmed active channel
count") channel count is no longer being set if monitor_present is 0.
This is because setting the count was moved after the CA value is
determined, which is only after the monitor_present check in
hdmi_setup_audio_infoframe().

Unfortunately, in some cases, such as with a non-spec-compliant codec or
with a problematic video driver, monitor_present is always 0. As a
specific example, this seems to happen with gen1 ATV (SiI1390 codec),
causing left-channel-only stereo playback (multi-channel playback has
apparently never worked with this codec despite it reporting 8 channels,
reason unknown).

Simply setting converter channel count without setting the pin infoframe
and channel mapping as well does not theoretically make much sense as
this will just mean they are out-of-sync and multichannel playback will
have a wrong channel mapping.

However, adding back just setting the converter channel count even in
no-monitor case is the safest change which at least fixes the stereo
playback regression on SiI1390 codec. Do that.

Signed-off-by: Anssi Hannula <anssi.hannula@iki.fi>
Reported-by: Stephan Raue <stephan@openelec.tv>
Tested-by: Stephan Raue <stephan@openelec.tv>
Cc: <stable@vger.kernel.org> # 3.12+
Signed-off-by: Takashi Iwai <tiwai@suse.de>

The TEAC UD-H01 firmware sends wrong feedback frequency values, thus
causing the PC to send the samples at a wrong rate, which results in
clicks and crackles in the output.

Add a workaround to detect and fix the corruption.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
[mick37@gmx.de: use sender->udh01_fb_quirk rather than
 ep->udh01_fb_quirk in snd_usb_handle_sync_urb()]
Reported-and-tested-by: Mick <mick37@gmx.de>
Reported-and-tested-by: Andrea Messa <andr.messa@tiscali.it>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

The recent addition of the USB audio mixer suspend/resume may lead to
deadlocks when the driver tries to call usb_autopm_get_interface()
recursively, since the function tries to sync with the finish of the
other calls.  For avoiding it, introduce a flag indicating the resume
operation and avoids the recursive usb_autopm_get_interface() calls
during the resume.

Reported-and-tested-by: Bryan Quigley <gquigs@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

The suspend callback of usb-audio driver may be called multiple times
per suspend when multiple USB interfaces are bound to a single sound
card instance.  In such a case, it's superfluous to save the mixer
values multiple times.  This patch fixes it by checking the counter.

Signed-off-by: Takashi Iwai <tiwai@suse.de>

This (widely used) construction:

if(printk_ratelimit())
	dev_dbg()

Causes the ratelimiting to spam the kernel log with the "callbacks suppressed"
message below, even while the dev_dbg it is supposed to rate limit wouldn't
print anything because DEBUG is not defined for this device.

[  533.803964] retire_playback_urb: 852 callbacks suppressed
[  538.807930] retire_playback_urb: 852 callbacks suppressed
[  543.811897] retire_playback_urb: 852 callbacks suppressed
[  548.815745] retire_playback_urb: 852 callbacks suppressed
[  553.819826] retire_playback_urb: 852 callbacks suppressed

So use dev_dbg_ratelimited() instead of this construction.

Signed-off-by: Sander Eikelenboom <linux@eikelenboom.it>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

When we plug a 3-ring headset on the Dell machine (VID: 0x10ec0255,
SID: 0x1028067e), the headset mic can't be detected, after apply this
patch, the headset mic can work well.

BugLink: https://bugs.launchpad.net/bugs/1297581


Cc: David Henningsson <david.henningsson@canonical.com>
Cc: stable@vger.kernel.org
Signed-off-by: Hui Wang <hui.wang@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

The recent commit (ca460f86

) changed the CORB RP reset procedure to
follow the specification with a couple of sanity checks.
Unfortunately, Nvidia controller chips seem not following this way,
and spew the warning messages like:
  snd_hda_intel 0000:00:10.1: CORB reset timeout#1, CORBRP = 0

This patch adds the workaround for such chips.  It just skips the new
reset procedure for the known broken chips.

Signed-off-by: Takashi Iwai <tiwai@suse.de>

When we plug a 3-ring headset on the Dell machine (VID: 0x10ec0255,
SID: 0x10280674), the headset mic can't be detected, after apply this
patch, the headset mic can work well.

BugLink: https://bugs.launchpad.net/bugs/1297581


Cc: David Henningsson <david.henningsson@canonical.com>
Cc: stable@vger.kernel.org
Signed-off-by: Hui Wang <hui.wang@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Merge tag 'asoc-v3.15-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus

ASoC: Fixes for v3.15

A smattering of driver-specific fixes here, nothing generic.  The Cirrus
CODEC conversions to devm_ are leak fixes - the conversion adds missing
error handling code.

Use a newline character appropriately.

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Mark Brown <broonie@linaro.org>

audmux_debugfs_init() is marked as __init, but is called from imx_audmux_probe()
which is not marked as __init. This creates a section mismatch and a potential
runtime crash (if imx_audmux_probe() is called after the .init section was
dropped). This patch removes the __init annotation from audmux_debugfs_init(),
which fixes the following warning:
	WARNING: sound/soc/built-in.o(.text+0x86960): Section mismatch in reference
	from the function imx_audmux_probe() to the function
	.init.text:audmux_debugfs_init()

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@linaro.org>

rsnd_soc_dai_trigger() will be called
after rsnd_dai_pointer_update() function
which is using rsnd_lock().
Thus, it should be called from outside of rsnd_lock().
Kernel will be hangup without this patch.
Special thanks to Kataoka-san

Reported-by: Ryo Kataoka <ryo.kataoka.wt@renesas.com>
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@linaro.org>

Merge remote-tracking branches 'asoc/fix/intel', 'asoc/fix/jz4740', 'asoc/fix/rcar', 'asoc/fix/tlv320aic31xx' and 'asoc/fix/tlv320aic3x' into asoc-linus

Merge remote-tracking branches 'asoc/fix/alc5623', 'asoc/fix/cs42l52', 'asoc/fix/cs42l73' and 'asoc/fix/fsl-spdif' into asoc-linus

Commit 0406a40a ("ASoC: jz4740: Use the generic dmaengine PCM driver")
jz4740-pcm.c file, but neglected to remove the Makefile entries.

Fixes: 0406a40a

 ("ASoC: jz4740: Use the generic dmaengine PCM driver")
Reported-by: kbuild test robot <fengguang.wu@intel.com>
Reported-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@linaro.org>

There were occasional ADSP crash during reboot testing:

[   11.883364] BUG: unable to handle kernel paging request at ffffc90121700000
[   11.883380] IP: [<ffffffffc024d8bc>] sst_module_insert_fixed_block+0x24f/0x26d [snd_soc_sst_dsp]
[   11.883397] PGD 7800b067 PUD 0
[   11.883405] Oops: 0002 [#1] SMP
[   11.886418] gsmi: Log Shutdown Reason 0x03

The virtual address, ffffc90121700000, was out of range. The virtual
address is calculated by adding LPE base address with an offset:

sst_memcpy32(dsp->addr.lpe + data->offset, data->data, data->size);

The offset is calculated in sst_byt_parse_module, by subtraction of
two virtual addresses dsp->addr.fw_ext and dsp->addr.lpe:

block_data.offset = block->ram_offset + (dsp->addr.fw_ext - dsp->addr.lpe);

These virtual addresses are assigned by kernel from ioremap:

sst->addr.lpe = ioremap(pdata->lpe_base, pdata->lpe_size);
sst->addr.fw_ext = ioremap(pdata->fw_base, pdata->fw_size);

In current driver code, offset is defined as unsigned int32:

struct sst_module_data {
...
	u32 offset;		/* offset in FW file */
};

Most of the time kernel assigned virtual addresses with addr.fw_ext
greater than addr.lpe. But sometimes it was the other way round.

Fix the problem by declaring offset as signed int32_t.

Signed-off-by: Wenkai Du <wenkai.du@intel.com>
Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Signed-off-by: Mark Brown <broonie@linaro.org>

Commit 9e1fda4ae158 ("ASoC: dapm: Implement mixer input auto-disable")
is trying to free the widget it allocated by snd_soc_dapm_new_control()
call in dapm_kcontrol_data_alloc() by adding kfree(data->widget) to
dapm_kcontrol_free().

This is causing a widget double free with auto-disabled DAPM kcontrols
in sound card unregistration because widgets are already freed before
dapm_kcontrol_free() is called.

Reason for that is all widgets are added into dapm->card->widgets list
in snd_soc_dapm_new_control() and freed in dapm_free_widgets() during
execution of snd_soc_dapm_free().

Now snd_soc_dapm_free() calls for different DAPM contexts happens before
snd_card_free() call from where the call chain to dapm_kcontrol_free()
begins:

soc_cleanup_card_resources()
  soc_remove_dai_links()
    soc_remove_link_dais()
      snd_soc_dapm_free(&cpu_dai->dapm)
    soc_remove_link_components()
      soc_remove_platform()
        snd_soc_dapm_free(&platform->dapm)
      soc_remove_codec()
        snd_soc_dapm_free(&codec->dapm)
  snd_soc_dapm_free(&card->dapm)
  snd_card_free()
    snd_card_do_free()
      snd_device_free_all()
        snd_device_free()
          snd_ctl_dev_free()
            snd_ctl_remove()
              snd_ctl_free_one()
                dapm_kcontrol_free()

This wasn't making harm with ordinary DAPM kcontrols since data->widget is NULL for
them.

Fixes: 9e1fda4ae158 (ASoC: dapm: Implement mixer input auto-disable)
Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Acked-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@linaro.org>
Cc: stable@vger.kernel.org

Pull slave-dmaengine fixes from Vinod Koul:
 "Back from long weekend here in India and now the time to send fixes
  for slave dmaengine.
   - Dan's fix of sirf xlate code
   - Jean's fix for timberland
   - edma fixes by Sekhar for SG handling and Yuan for changing init
     call"

* 'fixes' of git://git.infradead.org/users/vkoul/slave-dma:
  dma: fix eDMA driver as a subsys_initcall
  dmaengine: sirf: off by one in of_dma_sirfsoc_xlate()
  platform: Fix timberdale dependencies
  dma: edma: fix incorrect SG list handling

Pull iommu fixes from Joerg Roedel:
 "Fixes for regressions:

   - fix wrong IOMMU enumeration causing some SCSI device drivers
     initialization failures
   - ARM-SMMU fixes for a panic condition and a wrong return value"

* tag 'iommu-fixes-v3.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu:
  iommu/arm-smmu: fix panic in arm_smmu_alloc_init_pte
  iommu/arm-smmu: Return 0 on unmap failure
  iommu/vt-d: fix bug in matching PCI devices with DRHD/RMRR descriptors
  iommu/vt-d: Fix get_domain_for_dev() handling of upstream PCIe bridges
  iommu/vt-d: fix memory leakage caused by commit ea8ea460

Pull perf tooling fixes from Ingo Molnar:
 "Three small tooling fixes"

* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  perf tools: Improve error reporting
  perf tools: Adjust symbols in VDSO
  perf kvm: Fix 'Min time' counting in report command

Merge tag 'perf-urgent-for-mingo' of git://git.kernel.org/pub/scm/linux/kernel/git/jolsa/perf

 into perf/urgent

Pull perf/urgent fixes from Jiri Olsa:

User visible changes:

  * Adjust symbols in VDSO to properly resolve its function names (Vladimir Nikulichev)

  * Improve error reporting for record session failure (Adrien BAK)

  * Fix 'Min time' counting in report command (Alexander Yarygin)

Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>

In the current version, when using perf record, if something goes
wrong in tools/perf/builtin-record.c:375
  session = perf_session__new(file, false, NULL);

The error message:
"Not enough memory for reading per file header"

is issued. This error message seems to be outdated and is not very
helpful. This patch proposes to replace this error message by
"Perf session creation failed"

I believe this issue has been brought to lkml:
https://lkml.org/lkml/2014/2/24/458


although this patch only tackles a (small) part of the issue.

Additionnaly, this patch improves error reporting in
tools/perf/util/data.c open_file_write.

Currently, if the call to open fails, the user is unaware of it.
This patch logs the error, before returning the error code to
the caller.

Reported-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Adrien BAK <adrien.bak@metascale.org>
Link: http://lkml.kernel.org/r/1397786443.3093.4.camel@beast


[ Reorganize the changelog into paragraphs ]
[ Added empty line after fd declaration in open_file_write ]
Signed-off-by: Jiri Olsa <jolsa@redhat.com>