- Jun 02, 2023
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/efi/efiLinus Torvalds authored
Pull EFI fixes from Ard Biesheuvel: "A few minor fixes for EFI, one of which fixes the reported boot regression when booting x86 kernels using the BIOS based loader built into the hypervisor framework on macOS. - fix harmless warning in zboot code on 'make clean' - add some missing prototypes - fix boot regressions triggered by PE/COFF header image minor version bump" * tag 'efi-fixes-for-v6.4-1' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi: efi: Bump stub image version for macOS HVF compatibility efi: fix missing prototype warnings efi/libstub: zboot: Avoid eager evaluation of objcopy flags -
git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdevLinus Torvalds authored
Pull fbdev fixes from Helge Deller: "Most notable is a fix for a null-ptr-deref in fbcon's soft_cursor function which was found by syzbot. - Fix null-ptr-deref in soft_cursor - various remove callback conversions - error path fixes in imsttfb" * tag 'fbdev-for-6.4-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev: fbdev: bw2: Convert to platform remove callback returning void fbdev: broadsheetfb: Convert to platform remove callback returning void fbdev: au1200fb: Convert to platform remove callback returning void fbdev: au1100fb: Convert to platform remove callback returning void fbdev: arcfb: Convert to platform remove callback returning void fbdev: au1100fb: Drop if with an always false condition fbcon: Fix null-ptr-deref in soft_cursor fbdev: imsttfb: Fix error path of imsttfb_probe() fbdev: imsttfb: Release framebuffer and dealloc cmap on error path fbdev: matroxfb ssd1307fb: Switch i2c drivers back to use .probe()
-
git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linuxLinus Torvalds authored
Pull mtd fixes from Miquel Raynal: "MTD core: - MAINTAINERS: Add Michal as reviewer instead of Naga - mtdchar: Mark bits of ioctl handler noinline NAND controller drivers: - marvell: - Don't set the NAND frequency select - Ensure timing values are written - ingenic: Fix empty stub helper definitions SPI-NOR core: - Fix divide by zero for spi-nor-generic flashes SPI-NOR manufacturer driver: - spansion: make sure local struct does not contain garbage" * tag 'mtd/fixes-for-6.4-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux: mtd: rawnand: marvell: don't set the NAND frequency select mtd: rawnand: marvell: ensure timing values are written mtdchar: mark bits of ioctl handler noinline MAINTAINERS: Add myself as reviewer instead of Naga mtd: spi-nor: Fix divide by zero for spi-nor-generic flashes mtd: rawnand: ingenic: fix empty stub helper definitions mtd: spi-nor: spansion: make sure local struct does not contain garbage -
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netLinus Torvalds authored
Pull networking fixes from Jakub Kicinski: "Happy Wear a Dress Day. Fairly standard-sized batch of fixes, accounting for the lack of sub-tree submissions this week. The mlx5 IRQ fixes are notable, people were complaining about that. No fires burning. Current release - regressions: - eth: mlx5e: - multiple fixes for dynamic IRQ allocation - prevent encap offload when neigh update is running - eth: mana: fix perf regression: remove rx_cqes, tx_cqes counters Current release - new code bugs: - eth: mlx5e: DR, add missing mutex init/destroy in pattern manager Previous releases - always broken: - tcp: deny tcp_disconnect() when threads are waiting - sched: prevent ingress Qdiscs from getting installed in random locations in the hierarchy and moving around - sched: flower: fix possible OOB write in fl_set_geneve_opt() - netlink: fix NETLINK_LIST_MEMBERSHIPS length report - udp6: fix race condition in udp6_sendmsg & connect - tcp: fix mishandling when the sack compression is deferred - rtnetlink: validate link attributes set at creation time - mptcp: fix connect timeout handling - eth: stmmac: fix call trace when stmmac_xdp_xmit() is invoked - eth: amd-xgbe: fix the false linkup in xgbe_phy_status - eth: mlx5e: - fix corner cases in internal buffer configuration - drain health before unregistering devlink - usb: qmi_wwan: set DTR quirk for BroadMobi BM818 Misc: - tcp: return user_mss for TCP_MAXSEG in CLOSE/LISTEN state if user_mss set" * tag 'net-6.4-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (71 commits) mptcp: fix active subflow finalization mptcp: add annotations around sk->sk_shutdown accesses mptcp: fix data race around msk->first access mptcp: consolidate passive msk socket initialization mptcp: add annotations around msk->subflow accesses mptcp: fix connect timeout handling rtnetlink: add the missing IFLA_GRO_ tb check in validate_linkmsg rtnetlink: move IFLA_GSO_ tb check to validate_linkmsg rtnetlink: call validate_linkmsg in rtnl_create_link ice: recycle/free all of the fragments from multi-buffer frame net: phy: mxl-gpy: extend interrupt fix to all impacted variants net: renesas: rswitch: Fix return value in error path of xmit net: dsa: mv88e6xxx: Increase wait after reset deactivation net: ipa: Use correct value for IPA_STATUS_SIZE tcp: fix mishandling when the sack compression is deferred. net/sched: flower: fix possible OOB write in fl_set_geneve_opt() sfc: fix error unwinds in TC offload net/mlx5: Read embedded cpu after init bit cleared net/mlx5e: Fix error handling in mlx5e_refresh_tirs net/mlx5: Ensure af_desc.mask is properly initialized ... -
Mike Christie authored
When switching from kthreads to vhost_tasks two bugs were added: 1. The vhost worker tasks's now show up as processes so scripts doing ps or ps a would not incorrectly detect the vhost task as another process. 2. kthreads disabled freeze by setting PF_NOFREEZE, but vhost tasks's didn't disable or add support for them. To fix both bugs, this switches the vhost task to be thread in the process that does the VHOST_SET_OWNER ioctl, and has vhost_worker call get_signal to support SIGKILL/SIGSTOP and freeze signals. Note that SIGKILL/STOP support is required because CLONE_THREAD requires CLONE_SIGHAND which requires those 2 signals to be supported. This is a modified version of the patch written by Mike Christie <michael.christie@oracle.com> which was a modified version of patch originally written by Linus. Much of what depended upon PF_IO_WORKER now depends on PF_USER_WORKER. Including ignoring signals, setting up the register state, and having get_signal return instead of calling do_group_exit. Tidied up the vhost_task abstraction so that the definition of vhost_task only needs to be visible inside of vhost_task.c. Making it easier to review the code and tell what needs to be done where. As part of this the main loop has been moved from vhost_worker into vhost_task_fn. vhost_worker now returns true if work was done. The main loop has been updated to call get_signal which handles SIGSTOP, freezing, and collects the message that tells the thread to exit as part of process exit. This collection clears __fatal_signal_pending. This collection is not guaranteed to clear signal_pending() so clear that explicitly so the schedule() sleeps. For now the vhost thread continues to exist and run work until the last file descriptor is closed and the release function is called as part of freeing struct file. To avoid hangs in the coredump rendezvous and when killing threads in a multi-threaded exec. The coredump code and de_thread have been modified to ignore vhost threads. Remvoing the special case for exec appears to require teaching vhost_dev_flush how to directly complete transactions in case the vhost thread is no longer running. Removing the special case for coredump rendezvous requires either the above fix needed for exec or moving the coredump rendezvous into get_signal. Fixes: 6e890c5d ("vhost: use vhost_tasks for worker threads") Signed-off-by:
Eric W. Biederman <ebiederm@xmission.com> Co-developed-by:
Mike Christie <michael.christie@oracle.com> Signed-off-by:
Michael S. Tsirkin <mst@redhat.com> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linuxJakub Kicinski authored
Saeed Mahameed says: ==================== mlx5 fixes 2023-05-31 This series provides bug fixes to mlx5 driver. * tag 'mlx5-fixes-2023-05-31' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux: net/mlx5: Read embedded cpu after init bit cleared net/mlx5e: Fix error handling in mlx5e_refresh_tirs net/mlx5: Ensure af_desc.mask is properly initialized net/mlx5: Fix setting of irq->map.index for static IRQ case net/mlx5: Remove rmap also in case dynamic MSIX not supported ==================== Link: https://lore.kernel.org/r/20230601031051.131529-1-saeed@kernel.org Signed-off-by:
Jakub Kicinski <kuba@kernel.org>
-
Jakub Kicinski authored
Mat Martineau says: ==================== mptcp: Fixes for connect timeout, access annotations, and subflow init Patch 1 allows the SO_SNDTIMEO sockopt to correctly change the connect timeout on MPTCP sockets. Patches 2-5 add READ_ONCE()/WRITE_ONCE() annotations to fix KCSAN issues. Patch 6 correctly initializes some subflow fields on outgoing connections. ==================== Link: https://lore.kernel.org/r/20230531-send-net-20230531-v1-0-47750c420571@kernel.org Signed-off-by:
-
Paolo Abeni authored
Active subflow are inserted into the connection list at creation time. When the MPJ handshake completes successfully, a new subflow creation netlink event is generated correctly, but the current code wrongly avoid initializing a couple of subflow data. The above will cause misbehavior on a few exceptional events: unneeded mptcp-level retransmission on msk-level sequence wrap-around and infinite mapping fallback even when a MPJ socket is present. Address the issue factoring out the needed initialization in a new helper and invoking the latter from __mptcp_finish_join() time for passive subflow and from mptcp_finish_join() for active ones. Fixes: 0530020a ("mptcp: track and update contiguous data status") Cc: stable@vger.kernel.org Reviewed-by:
Mat Martineau <martineau@kernel.org> Signed-off-by:
Paolo Abeni <pabeni@redhat.com> Signed-off-by:
-
Paolo Abeni authored
Christoph reported the mptcp variant of a recently addressed plain TCP issue. Similar to commit e14cadfd ("tcp: add annotations around sk->sk_shutdown accesses") add READ/WRITE ONCE annotations to silence KCSAN reports around lockless sk_shutdown access. Fixes: 71ba088c ("mptcp: cleanup accept and poll") Reported-by:
Christoph Paasch <cpaasch@apple.com> Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/401 Reviewed-by:
-
Paolo Abeni authored
The first subflow socket is accessed outside the msk socket lock by mptcp_subflow_fail(), we need to annotate each write access with WRITE_ONCE, but a few spots still lacks it. Fixes: 76a13b31 ("mptcp: invoke MP_FAIL response when needed") Reviewed-by:
-
Paolo Abeni authored
When the msk socket is cloned at MPC handshake time, a few fields are initialized in a racy way outside mptcp_sk_clone() and the msk socket lock. The above is due historical reasons: before commit a88d0092 ("mptcp: simplify subflow_syn_recv_sock()") as the first subflow socket carrying all the needed date was not available yet at msk creation time We can now refactor the code moving the missing initialization bit under the socket lock, removing the init race and avoiding some code duplication. This will also simplify the next patch, as all msk->first write access are now under the msk socket lock. Fixes: 0397c6d8 ("mptcp: keep unaccepted MPC subflow into join list") Reviewed-by:
-
Paolo Abeni authored
The MPTCP can access the first subflow socket in a few spots outside the socket lock scope. That is actually safe, as MPTCP will delete the socket itself only after the msk sock close(). Still the such accesses causes a few KCSAN splats, as reported by Christoph. Silence the harmless warning adding a few annotation around the relevant accesses. Fixes: 71ba088c ("mptcp: cleanup accept and poll") Reported-by:
-
Paolo Abeni authored
Ondrej reported a functional issue WRT timeout handling on connect with a nice reproducer. The problem is that the current mptcp connect waits for both the MPTCP socket level timeout, and the first subflow socket timeout. The latter is not influenced/touched by the exposed setsockopt(). Overall the above makes the SO_SNDTIMEO a no-op on connect. Since mptcp_connect is invoked via inet_stream_connect and the latter properly handle the MPTCP level timeout, we can address the issue making the nested subflow level connect always unblocking. This also allow simplifying a bit the code, dropping an ugly hack to handle the fastopen and custom proto_ops connect. The issues predates the blamed commit below, but the current resolution requires the infrastructure introduced there. Fixes: 54f1944e ("mptcp: factor out mptcp_connect()") Reported-by:
Ondrej Mosnacek <omosnace@redhat.com> Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/399 Cc: stable@vger.kernel.org Reviewed-by:
-
Jakub Kicinski authored
Xin Long says: ==================== rtnetlink: a couple of fixes in linkmsg validation validate_linkmsg() was introduced to do linkmsg validation for existing links. However, the new created links also need this linkmsg validation. Add validate_linkmsg() check for link creating in Patch 1, and add more tb checks into validate_linkmsg() in Patch 2 and 3. ==================== Link: https://lore.kernel.org/r/cover.1685548598.git.lucien.xin@gmail.com Signed-off-by:
-
Xin Long authored
This fixes the issue that dev gro_max_size and gso_ipv4_max_size can be set to a huge value: # ip link add dummy1 type dummy # ip link set dummy1 gro_max_size 4294967295 # ip -d link show dummy1 dummy addrgenmode eui64 ... gro_max_size 4294967295 Fixes: 0fe79f28 ("net: allow gro_max_size to exceed 65536") Fixes: 9eefedd5 ("net: add gso_ipv4_max_size and gro_ipv4_max_size per device") Reported-by:Xiumei Mu <xmu@redhat.com> Signed-off-by:
Xin Long <lucien.xin@gmail.com> Reviewed-by:
Simon Horman <simon.horman@corigine.com> Signed-off-by:
-
Xin Long authored
These IFLA_GSO_* tb check should also be done for the new created link, otherwise, they can be set to a huge value when creating links: # ip link add dummy1 gso_max_size 4294967295 type dummy # ip -d link show dummy1 dummy addrgenmode eui64 ... gso_max_size 4294967295 Fixes: 46e6b992 ("rtnetlink: allow GSO maximums to be set on device creation") Fixes: 9eefedd5 ("net: add gso_ipv4_max_size and gro_ipv4_max_size per device") Signed-off-by: -
Xin Long authored
validate_linkmsg() was introduced by commit 1840bb13 ("[RTNL]: Validate hardware and broadcast address attribute for RTM_NEWLINK") to validate tb[IFLA_ADDRESS/BROADCAST] for existing links. The same check should also be done for newly created links. This patch adds validate_linkmsg() call in rtnl_create_link(), to avoid the invalid address set when creating some devices like: # ip link add dummy0 type dummy # ip link add link dummy0 name mac0 address 01:02 type macsec Fixes: 0e06877c ("[RTNETLINK]: rtnl_link: allow specifying initial device address") Signed-off-by:
-
Maciej Fijalkowski authored
The ice driver caches next_to_clean value at the beginning of ice_clean_rx_irq() in order to remember the first buffer that has to be freed/recycled after main Rx processing loop. The end boundary is indicated by first descriptor of frame that Rx processing loop has ended its duties. Note that if mentioned loop ended in the middle of gathering multi-buffer frame, next_to_clean would be pointing to the descriptor in the middle of the frame BUT freeing/recycling stage will stop at the first descriptor. This means that next iteration of ice_clean_rx_irq() will miss the (first_desc, next_to_clean - 1) entries. When running various 9K MTU workloads, such splats were observed: [ 540.780716] BUG: kernel NULL pointer dereference, address: 0000000000000000 [ 540.787787] #PF: supervisor read access in kernel mode [ 540.793002] #PF: error_code(0x0000) - not-present page [ 540.798218] PGD 0 P4D 0 [ 540.800801] Oops: 0000 [#1] PREEMPT SMP NOPTI [ 540.805231] CPU: 18 PID: 3984 Comm: xskxceiver Tainted: G W 6.3.0-rc7+ #96 [ 540.813619] Hardware name: Intel Corporation S2600WFT/S2600WFT, BIOS SE5C620.86B.02.01.0008.031920191559 03/19/2019 [ 540.824209] RIP: 0010:ice_clean_rx_irq+0x2b6/0xf00 [ice] [ 540.829678] Code: 74 24 10 e9 aa 00 00 00 8b 55 78 41 31 57 10 41 09 c4 4d 85 ff 0f 84 83 00 00 00 49 8b 57 08 41 8b 4f 1c 65 8b 35 1a fa 4b 3f <48> 8b 02 48 c1 e8 3a 39 c6 0f 85 a2 00 00 00 f6 42 08 02 0f 85 98 [ 540.848717] RSP: 0018:ffffc9000f42fc50 EFLAGS: 00010282 [ 540.854029] RAX: 0000000000000004 RBX: 0000000000000002 RCX: 000000000000fffe [ 540.861272] RDX: 0000000000000000 RSI: 0000000000000001 RDI: 00000000ffffffff [ 540.868519] RBP: ffff88984a05ac00 R08: 0000000000000000 R09: dead000000000100 [ 540.875760] R10: ffff88983fffcd00 R11: 000000000010f2b8 R12: 0000000000000004 [ 540.883008] R13: 0000000000000003 R14: 0000000000000800 R15: ffff889847a10040 [ 540.890253] FS: 00007f6ddf7fe640(0000) GS:ffff88afdf800000(0000) knlGS:0000000000000000 [ 540.898465] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 540.904299] CR2: 0000000000000000 CR3: 000000010d3da001 CR4: 00000000007706e0 [ 540.911542] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 540.918789] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 540.926032] PKRU: 55555554 [ 540.928790] Call Trace: [ 540.931276] <TASK> [ 540.933418] ice_napi_poll+0x4ca/0x6d0 [ice] [ 540.937804] ? __pfx_ice_napi_poll+0x10/0x10 [ice] [ 540.942716] napi_busy_loop+0xd7/0x320 [ 540.946537] xsk_recvmsg+0x143/0x170 [ 540.950178] sock_recvmsg+0x99/0xa0 [ 540.953729] __sys_recvfrom+0xa8/0x120 [ 540.957543] ? do_futex+0xbd/0x1d0 [ 540.961008] ? __x64_sys_futex+0x73/0x1d0 [ 540.965083] __x64_sys_recvfrom+0x20/0x30 [ 540.969155] do_syscall_64+0x38/0x90 [ 540.972796] entry_SYSCALL_64_after_hwframe+0x72/0xdc [ 540.977934] RIP: 0033:0x7f6de5f27934 To fix this, set cached_ntc to first_desc so that at the end, when freeing/recycling buffers, descriptors from first to ntc are not missed. Fixes: 2fba7dc5 ("ice: Add support for XDP multi-buffer on Rx side") Signed-off-by:
Maciej Fijalkowski <maciej.fijalkowski@intel.com> Reviewed-by:
Tony Nguyen <anthony.l.nguyen@intel.com> Link: https://lore.kernel.org/r/20230531154457.3216621-1-anthony.l.nguyen@intel.com Signed-off-by:
-
Xu Liang authored
The interrupt fix in commit 97a89ed1 should be applied on all variants of GPY2xx PHY and GPY115C. Fixes: 97a89ed1 ("net: phy: mxl-gpy: disable interrupts on GPY215 by default") Signed-off-by:
Xu Liang <lxu@maxlinear.com> Reviewed-by:
-
Yoshihiro Shimoda authored
Fix return value in the error path of rswitch_start_xmit(). If TX queues are full, this function should return NETDEV_TX_BUSY. Fixes: 3590918b ("net: ethernet: renesas: Add support for "Ethernet Switch"") Signed-off-by:
Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Link: https://lore.kernel.org/r/20230529073817.1145208-1-yoshihiro.shimoda.uh@renesas.com Signed-off-by:
-
Chris Packham authored
marvell_nfc_setup_interface() uses the frequency retrieved from the clock associated with the nand interface to determine the timings that will be used. By changing the NAND frequency select without reflecting this in the clock configuration this means that the timings calculated don't correctly meet the requirements of the NAND chip. This hasn't been an issue up to now because of a different bug that was stopping the timings being updated after they were initially set. Fixes: b2525141 ("mtd: rawnand: marvell: Stop implementing ->select_chip()") Signed-off-by:
Chris Packham <chris.packham@alliedtelesis.co.nz> Signed-off-by:
Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20230525003154.2303012-2-chris.packham@alliedtelesis.co.nz
-
Chris Packham authored
When new timing values are calculated in marvell_nfc_setup_interface() ensure that they will be applied in marvell_nfc_select_target() by clearing the selected_chip pointer. Fixes: b2525141 ("mtd: rawnand: marvell: Stop implementing ->select_chip()") Suggested-by:
-
Arnd Bergmann authored
The addition of the mtdchar_read_ioctl() function caused the stack usage of mtdchar_ioctl() to grow beyond the warning limit on 32-bit architectures with gcc-13: drivers/mtd/mtdchar.c: In function 'mtdchar_ioctl': drivers/mtd/mtdchar.c:1229:1: error: the frame size of 1488 bytes is larger than 1024 bytes [-Werror=frame-larger-than=] Mark both the read and write portions as noinline_for_stack to ensure they don't get inlined and use separate stack slots to reduce the maximum usage, both in the mtdchar_ioctl() and combined with any of its callees. Fixes: 095bb6e4 ("mtdchar: add MEMREAD ioctl") Cc: stable@vger.kernel.org Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Reviewed-by:
Richard Weinberger <richard@nod.at> Signed-off-by:
-
Michal Simek authored
Naga no longer works for AMD/Xilinx and there is no activity from him to continue to maintain Xilinx related drivers. Add myself instead to be kept in loop if there is any need for testing. Signed-off-by:
Michal Simek <michal.simek@amd.com> Signed-off-by:
-
- Jun 01, 2023
-
-
Linus Torvalds authored
Merge tag 'firewire-fixes-6.4-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394 Pull firewire fix from Takashi Sakamoto: "A single patch to use a flexible array rather than a zero-length one" * tag 'firewire-fixes-6.4-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394: firewire: Replace zero-length array with flexible-array member
-
git://git.linaro.org/landing-teams/working/fujitsu/integrationLinus Torvalds authored
Pull mailbox fix from Jassi Brar: "Fix missing mutex unlock in mailbox-test" * tag 'mailbox-fixes-6.4-rc5' of git://git.linaro.org/landing-teams/working/fujitsu/integration: mailbox: mailbox-test: fix a locking issue in mbox_test_message_write()
-
Andreas Svensson authored
A switch held in reset by default needs to wait longer until we can reliably detect it. An issue was observed when testing on the Marvell 88E6393X (Link Street). The driver failed to detect the switch on some upstarts. Increasing the wait time after reset deactivation solves this issue. The updated wait time is now also the same as the wait time in the mv88e6xxx_hardware_reset function. Fixes: 7b75e49d ("net: dsa: mv88e6xxx: wait after reset deactivation") Signed-off-by:
Andreas Svensson <andreas.svensson@axis.com> Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/20230530145223.1223993-1-andreas.svensson@axis.com Signed-off-by:
-
Gustavo A. R. Silva authored
Zero-length and one-element arrays are deprecated, and we are moving towards adopting C99 flexible-array members, instead. Address the following warnings found with GCC-13 and -fstrict-flex-arrays=3 enabled: sound/firewire/amdtp-stream.c: In function ‘build_it_pkt_header’: sound/firewire/amdtp-stream.c:694:17: warning: ‘generate_cip_header’ accessing 8 bytes in a region of size 0 [-Wstringop-overflow=] 694 | generate_cip_header(s, cip_header, data_block_counter, syt); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ sound/firewire/amdtp-stream.c:694:17: note: referencing argument 2 of type ‘__be32[2]’ {aka ‘unsigned int[2]’} sound/firewire/amdtp-stream.c:667:13: note: in a call to function ‘generate_cip_header’ 667 | static void generate_cip_header(struct amdtp_stream *s, __be32 cip_header[2], | ^~~~~~~~~~~~~~~~~~~ This helps with the ongoing efforts to tighten the FORTIFY_SOURCE routines on memcpy() and help us make progress towards globally enabling -fstrict-flex-arrays=3 [1]. Link: https://github.com/KSPP/linux/issues/21 Link: https://github.com/KSPP/linux/issues/303 Link: https://gcc.gnu.org/pipermail/gcc-patches/2022-October/602902.html [1] Signed-off-by:Gustavo A. R. Silva <gustavoars@kernel.org> Reviewed-by:
Kees Cook <keescook@chromium.org> Link: https://lore.kernel.org/r/ZHT0V3SpvHyxCv5W@work Signed-off-by:
Takashi Sakamoto <o-takashi@sakamocchi.jp>
-
git://git.kernel.org/pub/scm/linux/kernel/git/hid/hidLinus Torvalds authored
Pull HID fixes from Jiri Kosina: - Regression fix for overlong long timeouts during initialization on some Logitech Unifying devices (Bastien Nocera) - error handling and overflow fixes for Wacom driver (Denis Arefev, Jason Gerecke, Nikita Zhandarovich) * tag 'for-linus-2023060101' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid: HID: logitech-hidpp: Handle timeout differently from busy HID: wacom: Add error check to wacom_parse_and_register() HID: google: add jewel USB id HID: wacom: avoid integer overflow in wacom_intuos_inout() HID: wacom: Check for string overflow from strscpy calls
-
git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libataLinus Torvalds authored
Pull ata fix from Damien Le Moal: - Fix ata_find_dev() use of the device number to find a struct ata_device for a port. This addresses issues with some passthrough commands with libsas managed devices. * tag 'ata-6.4-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata: ata: libata-scsi: Use correct device no in ata_find_dev()
-
git://git.samba.org/ksmbdLinus Torvalds authored
Pull smb server fixes from Steve French: "Eight server fixes (most also for stable): - Two fixes for uninitialized pointer reads (rename and link) - Fix potential UAF in oplock break - Two fixes for potential out of bound reads in negotiate - Fix crediting bug - Two fixes for xfstests (allocation size fix for test 694 and lookup issue shown by test 464)" * tag '6.4-rc4-smb3-server-fixes' of git://git.samba.org/ksmbd: ksmbd: call putname after using the last component ksmbd: fix incorrect AllocationSize set in smb2_get_info ksmbd: fix UAF issue from opinfo->conn ksmbd: fix multiple out-of-bounds read during context decoding ksmbd: fix slab-out-of-bounds read in smb2_handle_negotiate ksmbd: fix credit count leakage ksmbd: fix uninitialized pointer read in smb2_create_link() ksmbd: fix uninitialized pointer read in ksmbd_vfs_rename() -
Bert Karwatzki authored
IPA_STATUS_SIZE was introduced in commit b8dc7d0e as a replacement for the size of the removed struct ipa_status which had size sizeof(__le32[8]). Use this value as IPA_STATUS_SIZE. Fixes: b8dc7d0e ("net: ipa: stop using sizeof(status)") Signed-off-by:
Bert Karwatzki <spasswolf@web.de> Reviewed-by:
-
fuyuanli authored
In this patch, we mainly try to handle sending a compressed ack correctly if it's deferred. Here are more details in the old logic: When sack compression is triggered in the tcp_compressed_ack_kick(), if the sock is owned by user, it will set TCP_DELACK_TIMER_DEFERRED and then defer to the release cb phrase. Later once user releases the sock, tcp_delack_timer_handler() should send a ack as expected, which, however, cannot happen due to lack of ICSK_ACK_TIMER flag. Therefore, the receiver would not sent an ack until the sender's retransmission timeout. It definitely increases unnecessary latency. Fixes: 5d9f4262 ("tcp: add SACK compression") Suggested-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
fuyuanli <fuyuanli@didiglobal.com> Signed-off-by:
Jason Xing <kerneljasonxing@gmail.com> Link: https://lore.kernel.org/netdev/20230529113804.GA20300@didi-ThinkCentre-M920t-N000/ Reviewed-by:
-
Hangyu Hua authored
If we send two TCA_FLOWER_KEY_ENC_OPTS_GENEVE packets and their total size is 252 bytes(key->enc_opts.len = 252) then key->enc_opts.len = opt->length = data_len / 4 = 0 when the third TCA_FLOWER_KEY_ENC_OPTS_GENEVE packet enters fl_set_geneve_opt. This bypasses the next bounds check and results in an out-of-bounds. Fixes: 0a6e7778 ("net/sched: allow flower to match tunnel options") Signed-off-by:
Hangyu Hua <hbh25y@gmail.com> Reviewed-by:
Pieter Jansen van Vuuren <pieter.jansen-van-vuuren@amd.com> Link: https://lore.kernel.org/r/20230531102805.27090-1-hbh25y@gmail.com Signed-off-by:
-
Edward Cree authored
Failure ladders weren't exactly unwinding what the function had done up to that point; most seriously, when we encountered an already offloaded rule, the failure path tried to remove the new rule from the hashtable, which would in fact remove the already-present 'old' rule (since it has the same key) from the table, and leak its resources. Reported-by:
kernel test robot <lkp@intel.com> Reported-by:
Dan Carpenter <error27@gmail.com> Closes: https://lore.kernel.org/r/202305200745.xmIlkqjH-lkp@intel.com/ Fixes: d902e1a7 ("sfc: bare bones TC offload on EF100") Fixes: 17654d84 ("sfc: add offloading of 'foreign' TC (decap) rules") Signed-off-by:
Edward Cree <ecree.xilinx@gmail.com> Reviewed-by:
-
Moshe Shemesh authored
During driver load it reads embedded_cpu bit from initialization segment, but the initialization segment is readable only after initialization bit is cleared. Move the call to mlx5_read_embedded_cpu() right after initialization bit cleared. Signed-off-by:
Moshe Shemesh <moshe@nvidia.com> Fixes: 591905ba ("net/mlx5: Introduce Mellanox SmartNIC and modify page management logic") Reviewed-by:
Shay Drory <shayd@nvidia.com> Signed-off-by:
Saeed Mahameed <saeedm@nvidia.com>
-
Saeed Mahameed authored
Allocation failure is outside the critical lock section and should return immediately rather than jumping to the unlock section. Also unlock as soon as required and remove the now redundant jump label. Fixes: 80a2a902 ("net/mlx5e: Add a lock on tir list") Signed-off-by:
-
Chuck Lever authored
[ 9.837087] mlx5_core 0000:02:00.0: firmware version: 16.35.2000 [ 9.843126] mlx5_core 0000:02:00.0: 126.016 Gb/s available PCIe bandwidth (8.0 GT/s PCIe x16 link) [ 10.311515] mlx5_core 0000:02:00.0: Rate limit: 127 rates are supported, range: 0Mbps to 97656Mbps [ 10.321948] mlx5_core 0000:02:00.0: E-Switch: Total vports 2, per vport: max uc(128) max mc(2048) [ 10.344324] mlx5_core 0000:02:00.0: mlx5_pcie_event:301:(pid 88): PCIe slot advertised sufficient power (27W). [ 10.354339] BUG: unable to handle page fault for address: ffffffff8ff0ade0 [ 10.361206] #PF: supervisor read access in kernel mode [ 10.366335] #PF: error_code(0x0000) - not-present page [ 10.371467] PGD 81ec39067 P4D 81ec39067 PUD 81ec3a063 PMD 114b07063 PTE 800ffff7e10f5062 [ 10.379544] Oops: 0000 [#1] PREEMPT SMP PTI [ 10.383721] CPU: 0 PID: 117 Comm: kworker/0:6 Not tainted 6.3.0-13028-g7222f123c983 #1 [ 10.391625] Hardware name: Supermicro X10SRA-F/X10SRA-F, BIOS 2.0b 06/12/2017 [ 10.398750] Workqueue: events work_for_cpu_fn [ 10.403108] RIP: 0010:__bitmap_or+0x10/0x26 [ 10.407286] Code: 85 c0 0f 95 c0 c3 cc cc cc cc 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 89 c9 31 c0 48 83 c1 3f 48 c1 e9 06 39 c> [ 10.426024] RSP: 0000:ffffb45a0078f7b0 EFLAGS: 00010097 [ 10.431240] RAX: 0000000000000000 RBX: ffffffff8ff0adc0 RCX: 0000000000000004 [ 10.438365] RDX: ffff9156801967d0 RSI: ffffffff8ff0ade0 RDI: ffff9156801967b0 [ 10.445489] RBP: ffffb45a0078f7e8 R08: 0000000000000030 R09: 0000000000000000 [ 10.452613] R10: 0000000000000000 R11: 0000000000000000 R12: 00000000000000ec [ 10.459737] R13: ffffffff8ff0ade0 R14: 0000000000000001 R15: 0000000000000020 [ 10.466862] FS: 0000000000000000(0000) GS:ffff9165bfc00000(0000) knlGS:0000000000000000 [ 10.474936] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 10.480674] CR2: ffffffff8ff0ade0 CR3: 00000001011ae003 CR4: 00000000003706f0 [ 10.487800] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 10.494922] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 10.502046] Call Trace: [ 10.504493] <TASK> [ 10.506589] ? matrix_alloc_area.constprop.0+0x43/0x9a [ 10.511729] ? prepare_namespace+0x84/0x174 [ 10.515914] irq_matrix_reserve_managed+0x56/0x10c [ 10.520699] x86_vector_alloc_irqs+0x1d2/0x31e [ 10.525146] irq_domain_alloc_irqs_hierarchy+0x39/0x3f [ 10.530284] irq_domain_alloc_irqs_parent+0x1a/0x2a [ 10.535155] intel_irq_remapping_alloc+0x59/0x5e9 [ 10.539859] ? kmem_cache_debug_flags+0x11/0x26 [ 10.544383] ? __radix_tree_lookup+0x39/0xb9 [ 10.548649] irq_domain_alloc_irqs_hierarchy+0x39/0x3f [ 10.553779] irq_domain_alloc_irqs_parent+0x1a/0x2a [ 10.558650] msi_domain_alloc+0x8c/0x120 [ 10.567697] irq_domain_alloc_irqs_locked+0x11d/0x286 [ 10.572741] __irq_domain_alloc_irqs+0x72/0x93 [ 10.577179] __msi_domain_alloc_irqs+0x193/0x3f1 [ 10.581789] ? __xa_alloc+0xcf/0xe2 [ 10.585273] msi_domain_alloc_irq_at+0xa8/0xfe [ 10.589711] pci_msix_alloc_irq_at+0x47/0x5c The crash is due to matrix_alloc_area() attempting to access per-CPU memory for CPUs that are not present on the system. The CPU mask passed into reserve_managed_vector() via it's @irqd parameter is corrupted because it contains uninitialized stack data. Fixes: bbac70c7 ("net/mlx5: Use newer affinity descriptor") Reviewed-by:
Thomas Gleixner <tglx@linutronix.de> Signed-off-by:
Chuck Lever <chuck.lever@oracle.com> Signed-off-by:
-
Niklas Schnelle authored
When dynamic IRQ allocation is not supported all IRQs are allocated up front in mlx5_irq_table_create() instead of dynamically as part of mlx5_irq_alloc(). In the latter dynamic case irq->map.index is set via the mapping returned by pci_msix_alloc_irq_at(). In the static case and prior to commit 1da438c0 ("net/mlx5: Fix indexing of mlx5_irq") irq->map.index was set in mlx5_irq_alloc() twice once initially to 0 and then to the requested index before storing in the xarray. After this commit it is only set to 0 which breaks all other IRQ mappings. Fix this by setting irq->map.index to the requested index together with irq->map.virq and improve the related comment to make it clearer which cases it deals with. Cc: Chuck Lever III <chuck.lever@oracle.com> Tested-by:
Mark Brown <broonie@kernel.org> Reviewed-by:
Eli Cohen <elic@nvidia.com> Fixes: 1da438c0 ("net/mlx5: Fix indexing of mlx5_irq") Signed-off-by:
Niklas Schnelle <schnelle@linux.ibm.com> Tested-by:
Cédric Le Goater <clg@redhat.com> Signed-off-by:
-
Shay Drory authored
mlx5 add IRQs to rmap upon MSIX request, and mlx5 remove rmap from MSIX only if msi_map.index is populated. However, msi_map.index is populated only when dynamic MSIX is supported. This results in freeing IRQs without removing them from rmap, which triggers the bellow WARN_ON[1]. rmap is a feature which have no relation to dynamic MSIX. Hence, remove the check of msi_map.index when removing IRQ from rmap. [1] [ 200.307160 ] WARNING: CPU: 20 PID: 1702 at kernel/irq/manage.c:2034 free_irq+0x2ac/0x358 [ 200.316990 ] CPU: 20 PID: 1702 Comm: modprobe Not tainted 6.4.0-rc3_for_upstream_min_debug_2023_05_24_14_02 #1 [ 200.318939 ] Hardware name: QEMU KVM Virtual Machine, BIOS 0.0.0 02/06/2015 [ 200.321659 ] pc : free_irq+0x2ac/0x358 [ 200.322400 ] lr : free_irq+0x20/0x358 [ 200.337865 ] Call trace: [ 200.338360 ] free_irq+0x2ac/0x358 [ 200.339029 ] irq_release+0x58/0xd0 [mlx5_core] [ 200.340093 ] mlx5_irqs_release_vectors+0x80/0xb0 [mlx5_core] [ 200.341344 ] destroy_comp_eqs+0x120/0x170 [mlx5_core] [ 200.342469 ] mlx5_eq_table_destroy+0x1c/0x38 [mlx5_core] [ 200.343645 ] mlx5_unload+0x8c/0xc8 [mlx5_core] [ 200.344652 ] mlx5_uninit_one+0x78/0x118 [mlx5_core] [ 200.345745 ] remove_one+0x80/0x108 [mlx5_core] [ 200.346752 ] pci_device_remove+0x40/0xd8 [ 200.347554 ] device_remove+0x50/0x88 [ 200.348272 ] device_release_driver_internal+0x1c4/0x228 [ 200.349312 ] driver_detach+0x54/0xa0 [ 200.350030 ] bus_remove_driver+0x74/0x100 [ 200.350833 ] driver_unregister+0x34/0x68 [ 200.351619 ] pci_unregister_driver+0x28/0xa0 [ 200.352476 ] mlx5_cleanup+0x14/0x2210 [mlx5_core] [ 200.353536 ] __arm64_sys_delete_module+0x190/0x2e8 [ 200.354495 ] el0_svc_common.constprop.0+0x6c/0x1d0 [ 200.355455 ] do_el0_svc+0x38/0x98 [ 200.356122 ] el0_svc+0x1c/0x80 [ 200.356739 ] el0t_64_sync_handler+0xb4/0x130 [ 200.357604 ] el0t_64_sync+0x174/0x178 [ 200.358345 ] ---[ end trace 0000000000000000 ]--- Fixes: 3354822c ("net/mlx5: Use dynamic msix vectors allocation") Signed-off-by:
-
