- Jun 06, 2013
-
-
Daniel Tang authored
This patch adds a clocksource/clockevent driver for the timer found on some models in the TI-Nspire calculator series. The timer has two 16bit subtimers within its memory mapped I/O interface but only the first can generate interrupts. The first subtimer is used to generate clockevents but only if an interrupt number and register is given. The interrupt acknowledgement mechanism is a little strange because the interrupt mask and acknowledge registers are located in another memory mapped I/O peripheral. The address of this register is passed to the driver through device tree bindings. The second subtimer is used as a clocksource because it isn't capable of generating an interrupt. This subtimer is always added. Reviewed-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
Daniel Tang <dt.tangr@gmail.com> Signed-off-by:
Daniel Lezcano <daniel.lezcano@linaro.org>
-
Jingchang Lu authored
Add Freescale Vybrid Family period interrupt timer support. Signed-off-by:
Jingchang Lu <b35083@freescale.com> Reviewed-by:
Shawn Guo <shawn.guo@linaro.org> Signed-off-by:
-
Baruch Siach authored
irq_of_parse_and_map() returns 0 on error, while the code checks for NO_IRQ. This breaks on platforms that have NO_IRQ != 0. Cc: <stable@vger.kernel.org> Signed-off-by:
Baruch Siach <baruch@tkos.co.il> Signed-off-by:
-
- May 28, 2013
-
-
Thomas Gleixner authored
commit 7eaeb343 (clocksource: Provide unbind interface in sysfs) implemented clocksource_select_fallback() which is not defined for CONFIG_ARCH_USES_GETTIMEOFFSET=y. Add an empty inline function for that. Reported-by:
Ingo Molnar <mingo@kernel.org> Reported-by:
<fengguang.wu@intel.com> Signed-off-by:
Thomas Gleixner <tglx@linutronix.de>
-
Thomas Gleixner authored
Unbreak architectures which do not use clockevents, but require to build some of the core timekeeping infrastructure Reported-by:
-
- May 16, 2013
-
-
Thomas Gleixner authored
Provide a sysfs interface to allow unbinding of clockevent devices. The device is unbound if it is unused or if there is a replacement device available. Unbinding of broadcast devices is not supported as we don't want to foster that nonsense. If no replacement device is available the unbind returns -EBUSY. Unbind is available from the kernel and through sysfs, which is necessary to drop the module refcount. Signed-off-by:
-
Thomas Gleixner authored
Split out the clockevent device selection logic. Preparatory patch to allow unbinding active clockevent devices. Signed-off-by:
-
Thomas Gleixner authored
Provide a simple sysfs interface for the clockevent devices. Show the current active clockevent device. Signed-off-by:
-
Thomas Gleixner authored
We want to be able to remove clockevent modules as well. Add a refcount so we don't remove a module with an active clock event device. Signed-off-by:
-
Thomas Gleixner authored
No need to call another function and have duplicated cases. Signed-off-by:
-
Thomas Gleixner authored
Now that the notifier chain is gone there are no other users and it's pointless to nest tick_device_lock inside of clockevents_lock because there is no other use case. Signed-off-by:
-
Thomas Gleixner authored
7+ years and still a single user. Kill it. Signed-off-by:
-
Thomas Gleixner authored
The unregister call can fail, if the clocksource is the current one and there is no replacement clocksource available. It can also fail, if the clocksource is the watchdog clocksource and I'm not going to provide support for this. Signed-off-by:
-
Thomas Gleixner authored
With the module refcount held for the current clocksource there is no way to unload the module. Provide a sysfs interface which allows to unbind the clocksource. One could argue that the clocksource override could be (ab)used to do so, but the clocksource override cannot be used from the kernel itself, while an unbind function can be used to programmatically check whether a clocksource can be shutdown or not. The unbind functionality uses the new skip current feature of clocksource_select and verifies that a fallback clocksource has been installed. If the clocksource which should be unbound is the current clocksource and no fallback can be found, unbind returns -EBUSY. This does not support the unbinding of a clocksource which is used as the watchdog clocksource. No point in fostering crappy hardware. Signed-off-by:
-
Thomas Gleixner authored
Split out the user string input for clocksource override. Preparatory patch for unbind. [ jstultz: Fix an off by one error ] Signed-off-by:
-
Thomas Gleixner authored
Preparatory patch for clocksource unbind support. Split out code from clocksource_select and modify it, so it skips the current clocksource on request and tries to find a fallback clocksource. Convert all existing users. No functional change. Signed-off-by:
-
Thomas Gleixner authored
Add a module refcount, so the current clocksource cannot be removed unconditionally. Signed-off-by:
-
Thomas Gleixner authored
timekeeping_notify() can fail due cs->enable() failure. Though the caller does not notice and happily keeps the wrong clocksource as the current one. Let the caller know about failure, so the current clocksource will be shown correctly in sysfs. Signed-off-by:
John Stultz <john.stultz@linaro.org> Cc: Magnus Damm <magnus.damm@gmail.com> Link: http://lkml.kernel.org/r/20130425143435.696321912@linutronix.de Signed-off-by:
-
Thomas Gleixner authored
If a clocksource has a (wrong) high rating, but can't be used as a timebase for oneshot tick mode, it is unconditionally selected even when the system is already in oneshot tick mode. This causes full system failure. Verify the clocksource selection against the oneshot mode. Signed-off-by:
-
Thomas Gleixner authored
Signed-off-by:
Jamie Iles <jamie@jamieiles.com> Link: http://lkml.kernel.org/r/20130425143435.558006195@linutronix.de Signed-off-by:
-
Linus Torvalds authored
Merge tag 'trace-fixes-v3.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace Pull tracing fixes from Steven Rostedt: "This includes a fix to a memory leak when adding filters to traces. Also, Masami Hiramatsu fixed up some minor bugs that were discovered by sparse." * tag 'trace-fixes-v3.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: tracing/kprobes: Make print_*probe_event static tracing/kprobes: Fix a sparse warning for incorrect type in assignment tracing/kprobes: Use rcu_dereference_raw for tp->files tracing: Fix leaks of filter preds
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86 fixes from Thomas Gleixner: - Fix for a CPU hot-add deadlock in microcode update code - Fix for idle consolidation fallout - Documentation update for initial kernel direct mapping * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/mm: Add missing comments for initial kernel direct mapping x86/microcode: Add local mutex to fix physical CPU hot-add deadlock x86: Fix idle consolidation fallout
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull perf fixes from Thomas Gleixner: - Fix for a task exit cleanup race caused by a missing a preempt disable - Cleanup of the event notification functions with a massive reduction of duplicated code * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf: Factor out auxiliary events notification perf: Fix EXIT event notification
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull timer fixes from Thomas Gleixner: - Cure for not using zalloc in the first place, which leads to random crashes with CPUMASK_OFF_STACK. - Revert a user space visible change which broke udev - Add a missing cpu_online early return introduced by the new full dyntick conversions - Plug a long standing race in the timer wheel cpu hotplug code. Sigh... - Cleanup NOHZ per cpu data on cpu down to prevent stale data on cpu up. * 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: time: Revert ALWAYS_USE_PERSISTENT_CLOCK compile time optimizaitons timer: Don't reinitialize the cpu base lock during CPU_UP_PREPARE tick: Don't invoke tick_nohz_stop_sched_tick() if the cpu is offline tick: Cleanup NOHZ per cpu data on cpu down tick: Use zalloc_cpumask_var for allocating offstack cpumasks
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull core fixes from Thomas Gleixner: - Two fixlets for the fallout of the generic idle task conversion - Documentation update * 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: rcu/idle: Wrap cpu-idle poll mode within rcu_idle_enter/exit idle: Fix hlt/nohlt command-line handling in new generic idle kthread: Document ways of reducing OS jitter due to per-CPU kthreads
-
git://git.linaro.org/people/rmk/linux-armLinus Torvalds authored
Pull ARM fixes from Russell King: "A small number of fixes for stuff from the last merge window, and in one case (IRQ time accounting) the previous merge window." * 'fixes' of git://git.linaro.org/people/rmk/linux-arm: ARM: 7720/1: ARM v6/v7 cmpxchg64 shouldn't clear upper 32 bits of the old/new value ARM: 7715/1: MCPM: adapt to GIC changes after upstream merge ARM: 7714/1: mmc: mmci: Ensure return value of regulator_enable() is checked ARM: 7712/1: Remove trailing whitespace in arch/arm/Makefile ARM: 7711/1: dove: fix Dove cpu type from V7 to PJ4 ARM: finally enable IRQ time accounting config
-
git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-clientLinus Torvalds authored
Pull Ceph fixes from Sage Weil: "Yes, this is a much larger pull than I would like after -rc1. There are a few things included: - a few fixes for leaks and incorrect assertions - a few patches fixing behavior when mapped images are resized - handling for cloned/layered images that are flattened out from underneath the client The last bit was non-trivial, and there is some code movement and associated cleanup mixed in. This was ready and was meant to go in last week but I missed the boat on Friday. My only excuse is that I was waiting for an all clear from the testing and there were many other shiny things to distract me. Strictly speaking, handling the flatten case isn't a regression and could wait, so if you like we can try to pull the series apart, but Alex and I would much prefer to have it all in as it is a case real users will hit with 3.10." * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client: (33 commits) rbd: re-submit flattened write request (part 2) rbd: re-submit write request for flattened clone rbd: re-submit read request for flattened clone rbd: detect when clone image is flattened rbd: reference count parent requests rbd: define parent image request routines rbd: define rbd_dev_unparent() rbd: don't release write request until necessary rbd: get parent info on refresh rbd: ignore zero-overlap parent rbd: support reading parent page data for writes rbd: fix parent request size assumption libceph: init sent and completed when starting rbd: kill rbd_img_request_get() rbd: only set up watch for mapped images rbd: set mapping read-only flag in rbd_add() rbd: support reading parent page data rbd: fix an incorrect assertion condition rbd: define rbd_dev_v2_header_info() rbd: get rid of trivial v1 header wrappers ... -
Masami Hiramatsu authored
According to sparse warning, print_*probe_event static because those functions are not directly called from outside. Link: http://lkml.kernel.org/r/20130513115839.6545.83067.stgit@mhiramat-M0-7522 Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Tom Zanussi <tom.zanussi@intel.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@redhat.com> Signed-off-by:
Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Signed-off-by:
Steven Rostedt <rostedt@goodmis.org>
-
Masami Hiramatsu authored
Fix a sparse warning about the rcu operated pointer is defined without __rcu address space. Link: http://lkml.kernel.org/r/20130513115837.6545.23322.stgit@mhiramat-M0-7522 Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Tom Zanussi <tom.zanussi@intel.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@redhat.com> Signed-off-by:
-
Masami Hiramatsu authored
Use rcu_dereference_raw() for accessing tp->files. Because the write-side uses rcu_assign_pointer() for memory barrier, the read-side also has to use rcu_dereference_raw() with read memory barrier. Link: http://lkml.kernel.org/r/20130513115834.6545.17022.stgit@mhiramat-M0-7522 Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Tom Zanussi <tom.zanussi@intel.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@redhat.com> Signed-off-by:
-
Steven Rostedt (Red Hat) authored
Special preds are created when folding a series of preds that can be done in serial. These are allocated in an ops field of the pred structure. But they were never freed, causing memory leaks. This was discovered using the kmemleak checker: unreferenced object 0xffff8800797fd5e0 (size 32): comm "swapper/0", pid 1, jiffies 4294690605 (age 104.608s) hex dump (first 32 bytes): 00 00 01 00 03 00 05 00 07 00 09 00 0b 00 0d 00 ................ 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<ffffffff814b52af>] kmemleak_alloc+0x73/0x98 [<ffffffff8111ff84>] kmemleak_alloc_recursive.constprop.42+0x16/0x18 [<ffffffff81120e68>] __kmalloc+0xd7/0x125 [<ffffffff810d47eb>] kcalloc.constprop.24+0x2d/0x2f [<ffffffff810d4896>] fold_pred_tree_cb+0xa9/0xf4 [<ffffffff810d3781>] walk_pred_tree+0x47/0xcc [<ffffffff810d5030>] replace_preds.isra.20+0x6f8/0x72f [<ffffffff810d50b5>] create_filter+0x4e/0x8b [<ffffffff81b1c30d>] ftrace_test_event_filter+0x5a/0x155 [<ffffffff8100028d>] do_one_initcall+0xa0/0x137 [<ffffffff81afbedf>] kernel_init_freeable+0x14d/0x1dc [<ffffffff814b24b7>] kernel_init+0xe/0xdb [<ffffffff814d539c>] ret_from_fork+0x7c/0xb0 [<ffffffffffffffff>] 0xffffffffffffffff Cc: Tom Zanussi <tzanussi@gmail.com> Cc: stable@vger.kernel.org # 2.6.39+ Signed-off-by:
-
- May 15, 2013
-
-
John Stultz authored
Kay Sievers noted that the ALWAYS_USE_PERSISTENT_CLOCK config, which enables some minor compile time optimization to avoid uncessary code in mostly the suspend/resume path could cause problems for userland. In particular, the dependency for RTC_HCTOSYS on !ALWAYS_USE_PERSISTENT_CLOCK, which avoids setting the time twice and simplifies suspend/resume, has the side effect of causing the /sys/class/rtc/rtcN/hctosys flag to always be zero, and this flag is commonly used by udev to setup the /dev/rtc symlink to /dev/rtcN, which can cause pain for older applications. While the udev rules could use some work to be less fragile, breaking userland should strongly be avoided. Additionally the compile time optimizations are fairly minor, and the code being optimized is likely to be reworked in the future, so lets revert this change. Reported-by:
Kay Sievers <kay@vrfy.org> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4Linus Torvalds authored
Pull ext4 update from Ted Ts'o: "Fixed regressions (two stability regressions and a performance regression) introduced during the 3.10-rc1 merge window. Also included is a bug fix relating to allocating blocks after resizing an ext3 file system when using the ext4 file system driver" * tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: jbd,jbd2: fix oops in jbd2_journal_put_journal_head() ext4: revert "ext4: use io_end for multiple bios" ext4: limit group search loop for non-extent files ext4: fix fio regression
-
git://git.kernel.org/pub/scm/linux/kernel/git/tj/wqLinus Torvalds authored
Pull workqueue fix from Tejun Heo: "A fix for a workqueue_congested() regression that broke fscache" * 'for-3.10-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq: workqueue: workqueue_congested() shouldn't translate WORK_CPU_UNBOUND into node number
-
- May 14, 2013
-
-
Tirupathi Reddy authored
An inactive timer's base can refer to a offline cpu's base. In the current code, cpu_base's lock is blindly reinitialized each time a CPU is brought up. If a CPU is brought online during the period that another thread is trying to modify an inactive timer on that CPU with holding its timer base lock, then the lock will be reinitialized under its feet. This leads to following SPIN_BUG(). <0> BUG: spinlock already unlocked on CPU#3, kworker/u:3/1466 <0> lock: 0xe3ebe000, .magic: dead4ead, .owner: kworker/u:3/1466, .owner_cpu: 1 <4> [<c0013dc4>] (unwind_backtrace+0x0/0x11c) from [<c026e794>] (do_raw_spin_unlock+0x40/0xcc) <4> [<c026e794>] (do_raw_spin_unlock+0x40/0xcc) from [<c076c160>] (_raw_spin_unlock+0x8/0x30) <4> [<c076c160>] (_raw_spin_unlock+0x8/0x30) from [<c009b858>] (mod_timer+0x294/0x310) <4> [<c009b858>] (mod_timer+0x294/0x310) from [<c00a5e04>] (queue_delayed_work_on+0x104/0x120) <4> [<c00a5e04>] (queue_delayed_work_on+0x104/0x120) from [<c04eae00>] (sdhci_msm_bus_voting+0x88/0x9c) <4> [<c04eae00>] (sdhci_msm_bus_voting+0x88/0x9c) from [<c04d8780>] (sdhci_disable+0x40/0x48) <4> [<c04d8780>] (sdhci_disable+0x40/0x48) from [<c04bf300>] (mmc_release_host+0x4c/0xb0) <4> [<c04bf300>] (mmc_release_host+0x4c/0xb0) from [<c04c7aac>] (mmc_sd_detect+0x90/0xfc) <4> [<c04c7aac>] (mmc_sd_detect+0x90/0xfc) from [<c04c2504>] (mmc_rescan+0x7c/0x2c4) <4> [<c04c2504>] (mmc_rescan+0x7c/0x2c4) from [<c00a6a7c>] (process_one_work+0x27c/0x484) <4> [<c00a6a7c>] (process_one_work+0x27c/0x484) from [<c00a6e94>] (worker_thread+0x210/0x3b0) <4> [<c00a6e94>] (worker_thread+0x210/0x3b0) from [<c00aad9c>] (kthread+0x80/0x8c) <4> [<c00aad9c>] (kthread+0x80/0x8c) from [<c000ea80>] (kernel_thread_exit+0x0/0x8) As an example, this particular crash occurred when CPU #3 is executing mod_timer() on an inactive timer whose base is refered to offlined CPU #2. The code locked the timer_base corresponding to CPU #2. Before it could proceed, CPU #2 came online and reinitialized the spinlock corresponding to its base. Thus now CPU #3 held a lock which was reinitialized. When CPU #3 finally ended up unlocking the old cpu_base corresponding to CPU #2, we hit the above SPIN_BUG(). CPU #0 CPU #3 CPU #2 ------ ------- ------- ..... ...... <Offline> mod_timer() lock_timer_base spin_lock_irqsave(&base->lock) cpu_up(2) ..... ...... init_timers_cpu() .... ..... spin_lock_init(&base->lock) ..... spin_unlock_irqrestore(&base->lock) ...... <spin_bug> Allocation of per_cpu timer vector bases is done only once under "tvec_base_done[]" check. In the current code, spinlock_initialization of base->lock isn't under this check. When a CPU is up each time the base lock is reinitialized. Move base spinlock initialization under the check. Signed-off-by:
Tirupathi Reddy <tirupath@codeaurora.org> Cc: stable@vger.kernel.org Link: http://lkml.kernel.org/r/1368520142-4136-1-git-send-email-tirupath@codeaurora.org Signed-off-by:
-
Srivatsa S. Bhat authored
Bjørn Mork reported the following warning when running powertop. [ 49.289034] ------------[ cut here ]------------ [ 49.289055] WARNING: at kernel/rcutree.c:502 rcu_eqs_exit_common.isra.48+0x3d/0x125() [ 49.289244] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 3.10.0-bisect-rcu-warn+ #107 [ 49.289251] ffffffff8157d8c8 ffffffff81801e28 ffffffff8137e4e3 ffffffff81801e68 [ 49.289260] ffffffff8103094f ffffffff81801e68 0000000000000000 ffff88023afcd9b0 [ 49.289268] 0000000000000000 0140000000000000 ffff88023bee7700 ffffffff81801e78 [ 49.289276] Call Trace: [ 49.289285] [<ffffffff8137e4e3>] dump_stack+0x19/0x1b [ 49.289293] [<ffffffff8103094f>] warn_slowpath_common+0x62/0x7b [ 49.289300] [<ffffffff8103097d>] warn_slowpath_null+0x15/0x17 [ 49.289306] [<ffffffff810a9006>] rcu_eqs_exit_common.isra.48+0x3d/0x125 [ 49.289314] [<ffffffff81079b49>] ? trace_hardirqs_off_caller+0x37/0xa6 [ 49.289320] [<ffffffff810a9692>] rcu_id...
-
Thomas Gleixner authored
commit 5b39939a (nohz: Move ts->idle_calls incrementation into strict idle logic) moved code out of tick_nohz_stop_sched_tick() and missed to bail out when the cpu is offline. That's causing subsequent failures as an offline CPU is supposed to die and not to fiddle with nohz magic. Return false in can_stop_idle_tick() if the cpu is offline. Reported-and-tested-by:
Jiri Kosina <jkosina@suse.cz> Reported-and-tested-by:
Prarit Bhargava <prarit@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Tony Luck <tony.luck@intel.com> Cc: x86@kernel.org Link: http://lkml.kernel.org/r/alpine.LFD.2.02.1305132138160.2863@ionos Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpcLinus Torvalds authored
Pull powerpc fixes from Benjamin Herrenschmidt: "This is mostly bug fixes (some of them regressions, some of them I deemed worth merging now) along with some patches from Li Zhong hooking up the new context tracking stuff (for the new full NO_HZ)" * 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: (25 commits) powerpc: Set show_unhandled_signals to 1 by default powerpc/perf: Fix setting of "to" addresses for BHRB powerpc/pmu: Fix order of interpreting BHRB target entries powerpc/perf: Move BHRB code into CONFIG_PPC64 region powerpc: select HAVE_CONTEXT_TRACKING for pSeries powerpc: Use the new schedule_user API on userspace preemption powerpc: Exit user context on notify resume powerpc: Exception hooks for context tracking subsystem powerpc: Syscall hooks for context tracking subsystem powerpc/booke64: Fix kernel hangs at kernel_dbg_exc powerpc: Fix irq_set_affinity() return values powerpc: Provide __bswapdi2 powerpc/powernv: Fix starting of secondary CPUs on OPALv2 and v3 powerpc/powernv: Detect OPAL v3 API version powerpc: Fix MAX_STACK_TRACE_ENTRIES too low warning again powerpc: Make CONFIG_RTAS_PROC depend on CONFIG_PROC_FS powerpc: Bring all threads online prior to migration/hibernation powerpc/rtas_flash: Fix validate_flash buffer overflow issue powerpc/kexec: Fix kexec when using VMX optimised memcpy powerpc: Fix build errors STRICT_MM_TYPECHECKS ...
-
Benjamin Herrenschmidt authored
Just like other architectures Signed-off-by:Benjamin Herrenschmidt <benh@kernel.crashing.org>
-
Michael Neuling authored
Currently we only set the "to" address in the branch stack when the CPU explicitly gives us a value. Unfortunately it only does this for XL form branches (eg blr, bctr, bctar) and not I and B form branches (eg b, bc). Fortunately if we read the instruction from memory we can extract the offset of a branch and calculate the target address. This adds a function power_pmu_bhrb_to() to calculate the target/to address of the corresponding I and B form branches. It handles branches in both user and kernel spaces. It also plumbs this into the perf brhb reading code. Signed-off-by:
Michael Neuling <mikey@neuling.org> Signed-off-by:
-
