- May 26, 2018
-
-
Kieran Bingham authored
Throughout the codebase, the term 'fragment' is used to represent a display list body. This term duplicates the 'body' which is already in use. The datasheet references these objects as a body, therefore replace all mentions of a fragment with a body, along with the corresponding pluralised terms. Signed-off-by:
Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Signed-off-by:
Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by:
Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
-
Kieran Bingham authored
The suspend and resume handlers are only utilised by video pipelines, yet the functions currently reside in the vsp1_pipe object. This causes an issue with resume, as the functions incorrectly call vsp1_pipeline_run() directly instead of processing the video object through vsp1_video_pipeline_run(). Move the functions to the video object, renaming accordingly and update the resume handler to call vsp1_video_pipeline_run() as appropriate. Signed-off-by:
-
Kieran Bingham authored
Commit 372b2b03 ("media: v4l: vsp1: Release buffers in start_streaming error path") introduced a helper to clean up buffers on error paths, but inadvertently changed the code such that only the output WPF buffers were cleaned, rather than the video node being operated on. Since then vsp1_video_cleanup_pipeline() has grown to perform both video node cleanup, as well as pipeline cleanup. Split the implementation into two distinct functions that perform the required work, so that each video node can release its buffers correctly on streamoff. The pipe cleanup that was performed in the vsp1_video_stop_streaming() (releasing the pipe->dl) is moved to the function for clarity. Fixes: 372b2b03 ("media: v4l: vsp1: Release buffers in start_streaming error path") Cc: stable@vger.kernel.org # v4.14+ Signed-off-by:
-
Geert Uytterhoeven authored
VIDEO_RENESAS_VSP1 depends on ARCH_RENESAS && OF. As ARCH_RENESAS implies OF, the latter can be dropped. Signed-off-by:
Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by:
Simon Horman <horms+renesas@verge.net.au> Signed-off-by:
-
Hans Verkuil authored
The CEC receive buffer was not always cleared correctly. The datasheet was a bit confusing since sometimes it mentioned that the bit in CEC register 0x4a had to be toggled, and sometimes it suggested it was a 'Clear-on-write' bit. But it really needs to be toggled. The patch also enables/disables the CEC irqs after the other irq are enabled/disabled instead of doing it before. It may not matter, but it feels more logical to do it in that order, and the implementation that we (Cisco) have used until now and that is known to be reliable also did it in that order. Signed-off-by:
Hans Verkuil <hansverk@cisco.com> Signed-off-by:
-
Fabien Dessenne authored
Set the DMA_MASK and stop using the GFP_DMA flag Signed-off-by:
Fabien Dessenne <fabien.dessenne@st.com> Signed-off-by:
-
Fabien Dessenne authored
Set the DMA_MASK and stop using the GFP_DMA flag Signed-off-by:
-
Hans Verkuil authored
Clarify the description of status bits, particularly w.r.t. ERROR and NACK. Signed-off-by:
Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by:
-
Hans Verkuil authored
In function 'strncpy', inlined from 'soc_camera_platform_probe' at drivers/media/platform/soc_camera/soc_camera_platform.c:162:2: include/linux/string.h:246:9: warning: '__builtin_strncpy' specified bound 32 equals destination size [-Wstringop-truncation] return __builtin_strncpy(p, q, size); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Signed-off-by: -
Hans Verkuil authored
In function 'strncpy', inlined from 'ceu_notify_complete' at drivers/media/platform/renesas-ceu.c:1378:2: include/linux/string.h:246:9: warning: '__builtin_strncpy' output truncated before terminating nul copying 11 bytes from a string of the same length [-Wstringop-truncation] return __builtin_strncpy(p, q, size); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Signed-off-by: -
Hans Verkuil authored
drivers/staging/media/imx/imx-media-capture.c: In function 'vidioc_querycap': drivers/staging/media/imx/imx-media-capture.c:76:2: warning: 'strncpy' output truncated copying 15 bytes from a string of length 17 [-Wstringop-truncation] strncpy(cap->driver, "imx-media-capture", sizeof(cap->driver) - 1); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Signed-off-by:
Steve Longerbeam <steve_longerbeam@mentor.com> Signed-off-by:
-
Hans Verkuil authored
In function 'strncpy', inlined from 'vidioc_g_audio' at media-git/drivers/media/usb/hdpvr/hdpvr-video.c:876:2: media-git/include/linux/string.h:246:9: warning: '__builtin_strncpy' specified bound 32 equals destination size [-Wstringop-truncation] return __builtin_strncpy(p, q, size); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Signed-off-by: -
Hans Verkuil authored
media-git/drivers/media/platform/s5p-mfc/s5p_mfc_enc.c: In function 'vidioc_querycap': media-git/drivers/media/platform/s5p-mfc/s5p_mfc_enc.c:1317:2: warning: 'strncpy' output may be truncated copying 31 bytes from a string of length 31 [-Wstringop-truncation] strncpy(cap->card, dev->vfd_enc->name, sizeof(cap->card) - 1); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ media-git/drivers/media/platform/s5p-mfc/s5p_mfc_dec.c: In function 'vidioc_querycap': media-git/drivers/media/platform/s5p-mfc/s5p_mfc_dec.c:275:2: warning: 'strncpy' output may be truncated copying 31 bytes from a string of length 31 [-Wstringop-truncation] strncpy(cap->card, dev->vfd_dec->name, sizeof(cap->card) - 1); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Signed-off-by:
Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by:
-
Hans Verkuil authored
In file included from media-git/include/linux/bitmap.h:9, from media-git/include/linux/cpumask.h:12, from media-git/arch/x86/include/asm/cpumask.h:5, from media-git/arch/x86/include/asm/msr.h:11, from media-git/arch/x86/include/asm/processor.h:21, from media-git/arch/x86/include/asm/cpufeature.h:5, from media-git/arch/x86/include/asm/thread_info.h:53, from media-git/include/linux/thread_info.h:38, from media-git/arch/x86/include/asm/preempt.h:7, from media-git/include/linux/preempt.h:81, from media-git/include/linux/spinlock.h:51, from media-git/include/linux/seqlock.h:36, from media-git/include/linux/time.h:6, from media-git/include/linux/stat.h:19, from media-git/include/linux/module.h:10, from media-git/drivers/staging/media/zoran/zoran_driver.c:44: In function 'strncpy', inlined from 'zoran_querycap' at media-git/drivers/staging/media/zoran/zoran_driver.c:1512:2: media-git/include/linux/string.h:246:9: warning: '__builtin_strncpy' output may be truncated copying 31 bytes from a string of length 31 [-Wstringop-truncation] return __builtin_strncpy(p, q, size); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Signed-off-by: -
Hans Verkuil authored
drivers/media/usb/go7007/go7007-v4l2.c:637:2: warning: 'strncpy' specified bound 32 equals destination size [-Wstringop-truncation] drivers/media/usb/go7007/go7007-fw.c:1507:3: warning: this statement may fall through [-Wimplicit-fallthrough=] Signed-off-by:
-
Luca Ceresoli authored
The API limitation described here is about the CROP API, not about the entire V4L2. Signed-off-by:
Luca Ceresoli <luca@lucaceresoli.net> Signed-off-by:
-
Luca Ceresoli authored
Split section "Comparison with old cropping API" in paragraphs for easier reading and improve visible links text. Signed-off-by:
-
Luca Ceresoli authored
These files have an automatically-generated numbering. Rename them with a name that suggests their meaning. Reported-by:
Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by:
-
Luca Ceresoli authored
Having two somewhat similar and largely overlapping APIs is confusing, especially since the older one appears in the docs before the newer and most featureful counterpart. Clarify all of this in several ways: - swap the two sections - give a name to the two APIs in the section names - add a note at the beginning of the CROP API section - update note about VIDIOC_CROPCAP Also remove a note that is incorrect (correct wording is in vidioc-cropcap.rst). Signed-off-by:
-
Luca Ceresoli authored
Fix typos in the selection documentation: - over -> cover - BONDS -> BOUNDS Signed-off-by:
-
Hans Verkuil authored
This driver hasn't been tested in a long, long time. The hardware is ancient and pretty much obsolete. This driver also needs to be converted to newer media frameworks (vb2!) but due to the lack of time and interest that is unlikely to happen. So this driver is a prime candidate for removal. If someone is interested in working on this driver to prevent its removal, then please contact the linux-media mailinglist. Signed-off-by:
-
Laurent Pinchart authored
The pixel rate, as reported by the V4L2_CID_PIXEL_RATE control, must include both horizontal and vertical blanking. Both the AFE and HDMI receiver program it incorrectly: - The HDMI receiver goes to the trouble of removing blanking to compute the rate of active pixels. This is easy to fix by removing the computation and returning the incoming pixel clock rate directly. - The AFE performs similar calculation, while it should simply return the fixed pixel rate for analog sources, mandated by the ADV748x to be 14.3180180 MHz. [Niklas: Update AFE fixed pixel rate] Signed-off-by:
Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Reviewed-by:
-
Ezequiel Garcia authored
This driver is currently specifying a vb2_queue lock, which means it straightforward to implement wait_prepare and wait_finish. Having these callbacks releases the queue lock while blocking, which improves latency by allowing for example streamoff or qbuf operations while waiting in dqbuf. Signed-off-by:
Ezequiel Garcia <ezequiel@collabora.com> Signed-off-by:
-
- May 17, 2018
-
-
Luca Ceresoli authored
mode_table[] has 3 members that are accessed based on their index, which makes worth using an array. The other members are always accessed with a constant index. This added indirection gives no improvement and only makes code more verbose. Remove these pointers from the array and access them directly. Signed-off-by:
Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by:
-
Luca Ceresoli authored
Most registers are defined using the name used in the datasheet. E.g. the defines for the HMAX register are IMX274_HMAX_REG_*. Rename the SHR and VMAX register accordingly. Also move them close to related registers: SHR close to SVR, VMAX close to HMAX. Signed-off-by:
-
Luca Ceresoli authored
struct imx274_frmfmt is instantiated only in the imx274_formats[] array, where imx274_formats[N].mode always equals N (via enum imx274_mode). So .mode carries no information, and unsurprisingly it is never used. mbus_code is never used because the 12 bit modes are not implemented. The colorspace member is also never used, which is normal since the imx274 sensor can output only one colorspace. Let's get rid of all of them. Signed-off-by:
-
Luca Ceresoli authored
imx274_s_frame_interval() already has a direct pointer to the v4l2 exposure control, so reuse it to simplify code. Signed-off-by:
-
Luca Ceresoli authored
interal->interval Signed-off-by:
-
Luca Ceresoli authored
Document the unit to avoid having to look through the code to compute it. Also clarify that these are min and max values. Signed-off-by:
-
Colin Ian King authored
The current code decrements the timeout counter i and the end of each loop i is incremented, so the check for timeout will always be false and hence the timeout mechanism is just a dead code path. Potentially, if the RD_READY bit is not set, we could end up in an infinite loop. Fix this so the timeout starts from 1000 and decrements to zero, if at the end of the loop i is zero we have a timeout condition. Detected by CoverityScan, CID#1324008 ("Logically dead code") Fixes: ccfc97bd ("[media] smiapp: Add driver") Signed-off-by:Colin Ian King <colin.king@canonical.com> Signed-off-by:
-
Todor Tomov authored
The ov7251 sensor is a 1/7.5-Inch B&W VGA (640x480) CMOS Digital Image Sensor from Omnivision. The driver supports the following modes: - 640x480 30fps - 640x480 60fps - 640x480 90fps Output format is 10bit B&W RAW - MEDIA_BUS_FMT_Y10_1X10. The driver supports configuration via user controls for: - exposure and gain; - horizontal and vertical flip; - test pattern. [Sakari Ailus: Wrap a line over 80 characters, fix trivial sparse warning] Signed-off-by:
Todor Tomov <todor.tomov@linaro.org> Reviewed-by:
Jacopo Mondi <jacopo@jmondi.org> Signed-off-by:
-
Todor Tomov authored
Add the document for ov7251 device tree binding. CC: Rob Herring <robh@kernel.org> CC: Mark Rutland <mark.rutland@arm.com> CC: devicetree@vger.kernel.org Signed-off-by:
Rob Herring <robh@kernel.org> Signed-off-by:
-
Maxime Ripard authored
The active frame size is set in the initialization arrays, but the value itself is also available in the struct ov5640_mode_info. Let's move these values out of the big bytes arrays, and program it with the value of the mode that we are given. Signed-off-by:
Maxime Ripard <maxime.ripard@bootlin.com> Signed-off-by:
-
Maxime Ripard authored
All the initialization arrays are changing the horizontal and vertical totals for some value. In order to clean up the driver, and since we're going to need that value later on, let's introduce in the ov5640_mode_info structure the horizontal and vertical total sizes, and move these out of the bytes array. Signed-off-by:
-
Maxime Ripard authored
The current width and height parameters in the struct ov5640_mode_info are actually the active horizontal and vertical resolutions. Since we're going to add a few other parameters, let's pick a better, more precise name for these values. Signed-off-by:
-
Maxime Ripard authored
The SCLK and SCLK2X dividers are fixed in stone in the initialization array. Let's make explicit what we're doing and move that away from the huge array to the initialization code. Signed-off-by:
-
Maxime Ripard authored
The sensor needs to have the auto exposure stopped while changing mode. However, when the new mode is set, the driver will force the auto exposure on, disregarding whether the control has been changed or not. Bypass the controls code entirely to do that, and only use the control value cached when restoring the auto exposure mode. Signed-off-by:
-
Mylène Josserand authored
Add the light frequency control to be able to set the frequency to manual (50Hz or 60Hz) or auto. [Sakari Ailus: Rename "ctl" as "ctrl" as agreed.] [mchehab+samsung@kernel.org: fixed two coding style warnings] Signed-off-by:
Mylène Josserand <mylene.josserand@bootlin.com> Signed-off-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by:
-
Akinobu Mita authored
The s_ctrl() operation can be called when the device is placed into power down mode. Then, applying controls to H/W should be postponed at this time. Instead the controls will be restored when the streaming is started. Cc: Mauro Carvalho Chehab <mchehab@s-opensource.com> Signed-off-by:
Akinobu Mita <akinobu.mita@gmail.com> Signed-off-by:
-
Akinobu Mita authored
The set_fmt() subdev pad operation for this driver currently does not only do the driver internal format selection but also do the actual register setup. This doesn't work if the device power control via GPIO lines is enabled. Because the set_fmt() can be called when the device is placed into power down mode. First of all, this fix adds flag to keep track of whether the device starts streaming or not. Then, the set_fmt() postpones applying the actual register setup at this time. Instead the setup will be applied when the streaming is started. Cc: Mauro Carvalho Chehab <mchehab@s-opensource.com> Signed-off-by:
-
