In order to support the PSR state of each transcoder, it adds
i915_psr_status to sub-directory of each transcoder.

v2: Change using of Symbolic permissions 'S_IRUGO' to using of octal
    permissions '0444'
v5: Addressed JJani Nikula's review comments
 - Remove checking of Gen12 for i915_psr_status.
 - Add check of HAS_PSR()
 - Remove meaningless check routine.

Signed-off-by: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Cc: José Roberto de Souza <jose.souza@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Anshuman Gupta <anshuman.gupta@intel.com>
Reviewed-by: Anshuman Gupta <anshuman.gupta@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210204134015.419036-2-gwan-gyeong.mun@intel.com

It is a preliminary work for supporting multiple EDP PSR and
DP PanelReplay. And it refactors singleton PSR to Multi Transcoder
supportable PSR.
And this moves and renames the i915_psr structure of drm_i915_private's to
intel_dp's intel_psr structure.
It also causes changes in PSR interrupt handling routine for supporting
multiple transcoders. But it does not change the scenario and timing of
enabling and disabling PSR. And it not support multiple pipes with
a single transcoder PSR case yet.

v2: Fix indentation and add comments
v3: Remove Blank line
v4: Rebased
v5: Rebased and Addressed Anshuman's review comment.
    - Move calling of intel_psr_init() to intel_dp_init_connector()
v6: Address Anshuman's review comments
   - Remove wrong comments and add comments for a limit of supporting of
     a single pipe PSR
v7: Update intel_psr_compute_config() for supporting multiple transcoder
    PSR on BDW+
v8: Address Anshuman's review comments
   - Replace DRM_DEBUG_KMS with drm_dbg_kms() / DRM_WARN with drm_warn()
v9: Fix commit message
v10: Rebased
v11: Address Jose's review comment.
  - Reorder calling order of intel_psr2_program_trans_man_trk_ctl().
  - In order to reduce changes keep the old name for drm_i915_private.
  - Change restrictions of multiple instances of PSR.
v12: Address Jose's review comment.
  - Change the calling of intel_psr2_program_trans_man_trk_ctl() into
    commit_pipe_config().
  - Change a checking order of CAN_PSR() and connector_status to original
    on i915_psr_sink_status_show().
  - Drop unneeded intel_dp_update_pipe() function.
  - In order to wait a specific encoder which belong to crtc_state on
    intel_psr_wait_for_idle(), add checking of encoder.
  - Add an whitespace to comments.
v13: Rebased and Address Jose's review comment.
  - Add and use for_each_intel_psr_enabled_encoder() macro.
  - In order to use correct frontbuffer_bit for each pipe,
    fix intel_psr_invalidate() and intel_psr_flush().
  - Remove redundant or unneeded codes.
  - Update comments.
v14: Address Jose's review comment
  - Add and use for_each_intel_encoder_can_psr() macro and
    for_each_intel_encoder_mask_can_psr() macro.
  - Add source_support member variable into intel_psr structure.
  - Update CAN_PSR() macro that checks source_support.
  - Move encoder's PSR availity check to psr_init() from
    psr_compute_config().
  - Remove redundant or unneeded codes.
v15: Remove wrong mutex lock/unlock of PSR from
     intel_psr2_program_trans_man_trk_ctl()

Signed-off-by: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Cc: José Roberto de Souza <jose.souza@intel.com>
Cc: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
Cc: Anshuman Gupta <anshuman.gupta@intel.com>
Reviewed-by: Anshuman Gupta <anshuman.gupta@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210204134015.419036-1-gwan-gyeong.mun@intel.com

Add DDR5 and LPDDR5 return values from punit fw.

BSPEC: 54023
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Clint Taylor <clinton.a.taylor@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210204200458.21875-1-clinton.a.taylor@intel.com

The BXT/GLK DPLL can't generate certain frequencies. We already
reject the 233-240MHz range on both. But on GLK the DPLL max
frequency was bumped from 300MHz to 594MHz, so now we get to
also worry about the 446-480MHz range (double the original
problem range). Reject any frequency within the higher
problematic range as well.

Cc: stable@vger.kernel.org
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/3000


Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210203093044.30532-1-ville.syrjala@linux.intel.com


Reviewed-by: Mika Kahola <mika.kahola@intel.com>

At least on some TGL platforms PUNIT wants to access some display HW
registers, but it doesn't handle display power management (disabling DC
states as required) and so this register access will lead to a hang. To
prevent this disable runtime power management for poweroff and reboot.

v2:
- Add code comment clarifying the requirement of display power states.
  (Ville)

Reported-and-tested-by: Khaled Almahallawy <khaled.almahallawy@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Khaled Almahallawy <khaled.almahallawy@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210127181909.128094-1-imre.deak@intel.com

There is a spelling mistake in a drm_dbg message. Fix it.

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210203110803.17894-1-colin.king@canonical.com

Merge tag 'topic/drm-device-pdev-2021-02-02' of git://anongit.freedesktop.org/drm/drm-intel

 into drm-intel-next

Driver Changes:
- drm/i915: Remove references to struct drm_device.pdev

Signed-off-by: Jani Nikula <jani.nikula@intel.com>
From: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/87y2g6fxxv.fsf@intel.com

Using struct drm_device.pdev is deprecated. Convert i915 to struct
drm_device.dev. No functional changes.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210128133127.2311-4-tzimmermann@suse.de

Using struct drm_device.pdev is deprecated. Convert i915 to struct
drm_device.dev. No functional changes.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210128133127.2311-3-tzimmermann@suse.de

Using struct drm_device.pdev is deprecated. Convert i915 to struct
drm_device.dev. No functional changes.

v6:
	* also remove assignment in selftests/ in a later patch (Chris)
v5:
	* remove assignment in later patch (Chris)
v3:
	* rebased
v2:
	* move gt/ and gvt/ changes into separate patches

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210128133127.2311-2-tzimmermann@suse.de

Merge tag 'topic/adl-s-enabling-2021-02-01-1' of git://anongit.freedesktop.org/drm/drm-intel

 into drm-intel-next

Driver Changes:
  - Add basic support for Alder Lake S, to be shared between
  drm-intel-next and drm-intel-gt-next

Signed-off-by: Jani Nikula <jani.nikula@intel.com>

# Conflicts:
#	drivers/gpu/drm/i915/i915_drv.h
From: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210202025620.2212559-1-lucas.demarchi@intel.com

- Extend Wa_1606931601 and Wa_1409804808 to ADL-S.
- Extend Wa_14010919138 and Wa_14010229206 to ADL-S (Madhumitha)
- Extend Wa_22010271021 to ADLS (cyokoyam)

v2:
- Extend Wa_1409804808 and remove unnecessary branching/redundant
  adls workaround placeholder functions.
- Split WAs properly based on previous platforms and applicable ADLS
  WA.

Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Madhumitha Tolakanahalli Pradeep <madhumitha.tolakanahalli.pradeep@intel.com>
Signed-off-by: Aditya Swarup <aditya.swarup@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210129182945.217078-9-aditya.swarup@intel.com

- Extend permanent driver WA Wa_1409767108, Wa_14010685332
  and Wa_14011294188 to adl-s.
- Extend permanent driver WA Wa_1606054188 to adl-s.
- Add Wa_14011765242 for adl-s A0 stepping.

Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Aditya Swarup <aditya.swarup@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210129182945.217078-8-aditya.swarup@intel.com

Just like RKL, the ADL_S platform also has different memory
characteristics from past platforms.  Update the values used
by our memory bandwidth calculations accordingly.

v2: Fix minor nitpick for shifting ADLS case above RKL(based on platform
order).(mdroper)

Bspec: 64631
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Signed-off-by: Tejas Upadhyay <tejaskumarx.surendrakumar.upadhyay@intel.com>
Signed-off-by: Aditya Swarup <aditya.swarup@intel.com>
Reviewed-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210129182945.217078-7-aditya.swarup@intel.com

Load DMC on ADL_S v2.01. This is the first offcial
release of DMC for ADL_S.

Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Aditya Swarup <aditya.swarup@intel.com>
Signed-off-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
Signed-off-by: Aditya Swarup <aditya.swarup@intel.com>
Reviewed-by: Aditya Swarup <aditya.swarup@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210129182945.217078-6-aditya.swarup@intel.com

- As RKL and ADL-S only have 5 planes, primary and 4 sprites and
  the cursor plane, let's group the handling together under
  HAS_D12_PLANE_MINIMIZATION.
- Also use macro to select pipe irq fault error mask.

BSpec: 49251
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Aditya Swarup <aditya.swarup@intel.com>
Reviewed-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210129182945.217078-5-aditya.swarup@intel.com

ADL-S, like RKL, uses the same internal device ID for the GuC and HuC as
TGL did, making them all firmware-compatible.  Let's re-use TGL's
firmware for ADL-S.

Bspec: 50668
Cc: John Harrison <John.C.Harrison@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Aditya Swarup <aditya.swarup@intel.com>
Reviewed-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210129182945.217078-4-aditya.swarup@intel.com

TGL power wells can be re-used for ADL-S with the exception of the fake
power well for TC_COLD, just like DG-1.

BSpec: 53597
Bspec: 49231

Cc: Imre Deak <imre.deak@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Aditya Swarup <aditya.swarup@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Aditya Swarup <aditya.swarup@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210129182945.217078-3-aditya.swarup@intel.com

ADL-S switches up which PHYs are considered a master to other PHYs;
PHY-C is no longer a master, but PHY-D is now.

Bspec: 49291
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Aditya Swarup <aditya.swarup@intel.com>
Reviewed-by: Aditya Swarup <aditya.swarup@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210129182945.217078-2-aditya.swarup@intel.com

Make the child device details easier to read by turning this:

[drm:parse_ddi_port [i915]] Port B VBT info: CRT:0 DVI:1 HDMI:1 DP:0 eDP:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0
[drm:parse_ddi_port [i915]] VBT HDMI level shift for port B: 8
[drm:parse_ddi_port [i915]] VBT DP max link rate for port B: 810000
[drm:parse_ddi_port [i915]] Port C VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0
[drm:parse_ddi_port [i915]] VBT HDMI level shift for port C: 8
[drm:parse_ddi_port [i915]] VBT (e)DP boost level for port C: 3
[drm:parse_ddi_port [i915]] VBT HDMI boost level for port C: 1
[drm:parse_ddi_port [i915]] VBT DP max link rate for port C: 810000

into this:

[drm:parse_ddi_port [i915]] Port B VBT info: CRT:0 DVI:1 HDMI:1 DP:0 eDP:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0
[drm:parse_ddi_port [i915]] Port B VBT HDMI level shift: 8
[drm:parse_ddi_port [i915]] Port B VBT DP max link rate: 810000
[drm:parse_ddi_port [i915]] Port C VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0
[drm:parse_ddi_port [i915]] Port C VBT HDMI level shift: 8
[drm:parse_ddi_port [i915]] Port C VBT (e)DP boost level: 3
[drm:parse_ddi_port [i915]] Port C VBT HDMI boost level: 1
[drm:parse_ddi_port [i915]] Port C VBT DP max link rate: 810000

Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210127084534.24406-1-jani.nikula@intel.com

Like the patch to disable QSES for HDCP 1.4 over MST
https://patchwork.freedesktop.org/patch/415297/

 the HDCP2.2 spec
doesn't require QSES as well and we've seen QSES not supported on a
couple HDCP2.2 docks so far (Dell WD19 and Lenovo LDC-G2)

Remove it for now until we get a better idea of how widely supported
QSES is and how to support it optionally.

Signed-off-by: Juston Li <juston.li@intel.com>
Reviewed-by: Anshuman Gupta <anshuman.gupta@intel.com>
Signed-off-by: Anshuman Gupta <anshuman.gupta@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210127065034.2501119-4-juston.li@intel.com

We shouldn't really trust tc_mode on non-TC PHYs since we never
initialize it explicitly. So let's check for the PHY type first.
Fortunately TC_PORT_TBT_ALT happens to be zero so I don't think
there's an actual bug here, just a possibility for a future one
if someone rearranges the enum values.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210128155948.13678-5-ville.syrjala@linux.intel.com


Reviewed-by: Imre Deak <imre.deak@intel.com>

The documented programming sequence indicates the correct point
for the vswing programming is just before we enable the DDI.
Make it so.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210128155948.13678-4-ville.syrjala@linux.intel.com


Reviewed-by: Imre Deak <imre.deak@intel.com>

Currently we only explicitly power up the combo PHY lanes
for DP. The spec says we should do it for HDMI as well.

Cc: stable@vger.kernel.org
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210128155948.13678-3-ville.syrjala@linux.intel.com


Reviewed-by: Imre Deak <imre.deak@intel.com>

Reduce the copypasta by pulling the combo PHY lane
power up stuff into a helper. We'll have a third user soon.

Cc: stable@vger.kernel.org
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210128155948.13678-2-ville.syrjala@linux.intel.com


Reviewed-by: Imre Deak <imre.deak@intel.com>

In thunderbolt mode the PHY is owned by the thunderbolt controller.
We are not supposed to touch it. So skip the vswing programming
as well (we already skipped the other steps not applicable to TBT).

Touching this stuff could supposedly interfere with the PHY
programming done by the thunderbolt controller.

Cc: stable@vger.kernel.org
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210128155948.13678-1-ville.syrjala@linux.intel.com


Reviewed-by: Imre Deak <imre.deak@intel.com>

Atm, the driver programs explicitly the default transparent link
training mode (0x55) to DP_PHY_REPEATER_MODE even if no LTTPRs are
detected.

This conforms to the spec (3.6.6.1):
"DP upstream devices that do not enable the Non-transparent mode of
 LTTPRs shall program the PHY_REPEATER_MODE register (DPCD Address
 F0003h) to 55h (default) prior to link training"

however writing the default value to this DPCD register seems to cause
occasional link training errors at least for a DELL WD19TB TBT dock, when
no LTTPRs are detected.

Writing to DP_PHY_REPEATER_MODE will also cause an unnecessary timeout
on systems without any LTTPR.

To fix the above two issues let's assume that setting the default mode
is redundant when no LTTPRs are detected. Keep the existing behavior and
program the default mode if more than 8 LTTPRs are detected or in case
the read from DP_PHY_REPEATER_CNT returns an invalid value.

References: https://gitlab.freedesktop.org/drm/intel/-/issues/2801


Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Khaled Almahallawy <khaled.almahallawy@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210118183143.1145707-1-imre.deak@intel.com

Add support for async flips on vlv/chv. Unlike all the other
platforms vlv/chv do not use the async flip bit in DSPCNTR and
instead we select between async vs. sync flips based on the
surface address register. The normal DSPSURF generates sync
flips DSPADDR_VLV generates async flips. And as usual the
interrupt bits are different from the other platforms.

Cc: Karthik B S <karthik.b.s@intel.com>
Cc: Vandita Kulkarni <vandita.kulkarni@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210111163711.12913-12-ville.syrjala@linux.intel.com


Reviewed-by: Karthik B S <karthik.b.s@intel.com>

Add support for async flips on ivb/hsw. Again no need for any
workarounds and just have to deal with the interrupt bits being
shuffled around a bit.

Cc: Karthik B S <karthik.b.s@intel.com>
Cc: Vandita Kulkarni <vandita.kulkarni@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210111163711.12913-11-ville.syrjala@linux.intel.com


Reviewed-by: Karthik B S <karthik.b.s@intel.com>

Add support for async flips on ivb/hsw. Unlike bdw+ we don't need
any workarounds to disable async flips. Apart from that the only
real difference from the bdw implementation is the location of the
flip_done interrupt bits.

Cc: Karthik B S <karthik.b.s@intel.com>
Cc: Vandita Kulkarni <vandita.kulkarni@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210111163711.12913-10-ville.syrjala@linux.intel.com


Reviewed-by: Karthik B S <karthik.b.s@intel.com>

Implement async flip support for BDW. The implementation is
similar to the skl+ code. And just like skl/bxt/glk bdw also
needs the disable w/a, thus we need to plumb the desired state
of the async flip all the way down to i9xx_plane_ctl_crtc().

According to the spec we do need to bump the surface alignment
to 256KiB for this. Async flips require an X-tiled buffer so
we don't have to worry about linear.

Cc: Karthik B S <karthik.b.s@intel.com>
Cc: Vandita Kulkarni <vandita.kulkarni@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210111163711.12913-9-ville.syrjala@linux.intel.com


Reviewed-by: Karthik B S <karthik.b.s@intel.com>

Limit pre-skl plane stride to below 4k or 8k pixels (depending on
the platform). We do this in order guarantee that TILEOFF/OFFSET.x
does not get too big.

Currently this is not a problem as we align SURF to 4k, and so
TILEOFF/OFFSET only have to deal with a single tile's worth of
pixels. But for async flips we're going to have to bump SURF
alignment to 256k, and thus we can no longer guarantee
TILEOFF/OFFSET.x will stay within acceptable bounds. We can avoid
this by borrowing a trick from the skl+ code and limit the max
plane stride to whatever value we can fit into TILEOFF/OFFSET.x.

The slight downside is that we may end up doing GTT remapping in
a few more cases where previously we did not have to. But since
that will only happen with huge buffers I'm not really concerned
about it.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210111163711.12913-3-ville.syrjala@linux.intel.com


Reviewed-by: Karthik B S <karthik.b.s@intel.com>

As it now it is always required for GEN12+ the is_16gb_dimm name
do not make sense for GEN12+.

v2:
- Updated comment on top of "dram_info->wm_lv_0_adjust_needed =
!IS_GEN9_LP(i915);"

Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210128164312.91160-3-jose.souza@intel.com

Up to now we were reading some DRAM information from MCHBAR register
and from pcode what is already not good but some GEN12(TGL-H and ADL-S)
platforms have MCHBAR DRAM information in different offsets.

This was notified to HW team that decided that the best alternative is
always apply the 16gb_dimm watermark adjustment for GEN12+ platforms
and read the remaning DRAM information needed to other display
programming from pcode.

So here moving the DRAM pcode function to intel_dram.c, removing
the duplicated fields from intel_qgv_info, setting and using
information from dram_info.

v2:
- bring back num_points to intel_qgv_info as num_qgv_point can be
overwritten in icl_get_qgv_points()
- add gen12_get_dram_info() and simplify gen11_get_dram_info()

Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210128164312.91160-2-jose.souza@intel.com

Valid, ranks and bandwidth_kbps are set into dram_info but are not
used anywhere else so nuking it.

Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210128164312.91160-1-jose.souza@intel.com

Atm the driver will calculate a wrong MST timeslots/MTP (aka time unit)
value for MST streams if the link parameters (link rate or lane count)
are limited in a way independent of the sink capabilities (reported by
DPCD).

One example of such a limitation is when a MUX between the sink and
source connects only a limited number of lanes to the display and
connects the rest of the lanes to other peripherals (USB).

Another issue is that atm MST core calculates the divider based on the
backwards compatible DPCD (at address 0x0000) vs. the extended
capability info (at address 0x2200). This can result in leaving some
part of the MST BW unused (For instance in case of the WD19TB dock).

Fix the above two issues by calculating the PBN divider value based on
the rate and lane count link parameters that the driver uses for all
other computation.

Bugzilla: https://gitlab.freedesktop.org/drm/intel/-/issues/2977


Cc: Lyude Paul <lyude@redhat.com>
Cc: Ville Syrjala <ville.syrjala@intel.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Ville Syrjala <ville.syrjala@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210125173636.1733812-2-imre.deak@intel.com

This function will be needed by the next patch where the driver
calculates the BW based on driver specific parameters, so export it.

At the same time sanitize the function params, passing the more natural
link rate instead of the encoding of the same rate.

v2:
- Fix function documentation. (Lyude)

Cc: Lyude Paul <lyude@redhat.com>
Cc: Ville Syrjala <ville.syrjala@intel.com>
Cc: <stable@vger.kernel.org>
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210125173636.1733812-1-imre.deak@intel.com

The HDCP 1.4 spec does not require the QUERY_STREAM_ENCRYPTION_STATUS
check, it was always a nice-to-have. After deploying this across various
devices, we've determined that some MST bridge chips do not properly
support this call for HDCP 1.4 (namely Synaptics and Realtek).

I had considered creating a quirk for this, but I think it's more
prudent to just disable the check entirely since I don't have an idea
how widespread support is.

Changes in v2:
-Rebased on -tip

Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Anshuman Gupta <anshuman.gupta@intel.com>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Anshuman Gupta <anshuman.gupta@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210106223909.34476-1-sean@poorly.run #v1
Link: https://patchwork.freedesktop.org/patch/msgid/20210121172620.33066-1-sean@poorly.run

Prevent the ICL HDR plane pipeline from performing YUV color range
correction twice when the input is in limited range. This is done by
removing the limited-range code from icl_program_input_csc().

Before this patch the following could happen: user space gives us a YUV
buffer in limited range; per the pipeline in [1], the plane would first
go through a "YUV Range correct" stage that expands the range; the plane
would then go through the "Input CSC" stage which would also expand the
range because icl_program_input_csc() would use a matrix and an offset
that assume limited-range input; this would ultimately cause dark and
light colors to appear darker and lighter than they should respectively.

This is an issue because if a buffer switches between being scanned out
and being composited with the GPU, the user will see a color difference.
If this switching happens quickly and frequently, the user will perceive
this as a flickering.

[1] https://01.org/sites/default/files/documentation/intel-gfx-prm-osrc-icllp-vol12-displayengine_0.pdf#page=281



Cc: stable@vger.kernel.org
Signed-off-by: Andres Calderon Jaramillo <andrescj@chromium.org>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201215224219.3896256-1-andrescj@google.com

Inform us if we're buggy and are about to exceed the size of the
bitfields in the plane TILEOFF/OFFSET registers.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210111163711.12913-2-ville.syrjala@linux.intel.com


Reviewed-by: Karthik B S <karthik.b.s@intel.com>