Skip to content
GitLab
  1. Jul 22, 2020
  3. Jul 21, 2020
    • Vladimir Oltean's avatar
      net: dsa: use the ETH_MIN_MTU and ETH_DATA_LEN default values · 71d4364a
      Vladimir Oltean authored 
      Now that DSA supports MTU configuration, undo the effects of commit
8b1efc0f

 ("net: remove MTU limits on a few ether_setup callers") and
let DSA interfaces use the default min_mtu and max_mtu specified by
ether_setup(). This is more important for min_mtu: since DSA is
Ethernet, the minimum MTU is the same as of any other Ethernet
interface, and definitely not zero. For the max_mtu, we have a callback
through which drivers can override that, if they want to.

Signed-off-by: default avatarVladimir Oltean <olteanv@gmail.com>
Reviewed-by: default avatarFlorian Fainelli <f.fainelli@gmail.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      71d4364a
    • Jonathan McDowell's avatar
      net: dsa: qca8k: implement the port MTU callbacks · f58d2598
      Jonathan McDowell authored 
      

This switch has a single max frame size configuration register, so we
track the requested MTU for each port and apply the largest.

v2:
- Address review feedback from Vladimir Oltean

Signed-off-by: default avatarJonathan McDowell <noodles@earth.li>
Acked-by: default avatarVladimir Oltean <olteanv@gmail.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      f58d2598
    • Wang Hai's avatar
      net: hsr: remove redundant null check · 2b96692b
      Wang Hai authored 
      

Because kfree_skb already checked NULL skb parameter,
so the additional checks are unnecessary, just remove them.

Reported-by: default avatarHulk Robot <hulkci@huawei.com>
Signed-off-by: default avatarWang Hai <wanghai38@huawei.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      2b96692b
    • Christophe JAILLET's avatar
      net/fealnx: switch from 'pci_' to 'dma_' API · 405e30e2
      Christophe JAILLET authored 
      

The wrappers in include/linux/pci-dma-compat.h should go away.

The patch has been generated with the coccinelle script below and has been
hand modified to replace GFP_ with a correct flag.
It has been compile tested.

When memory is allocated, GFP_KERNEL can be used because it is called from
the probe function (i.e. 'fealnx_init_one()') and no lock is taken.

@@
@@
-    PCI_DMA_BIDIRECTIONAL
+    DMA_BIDIRECTIONAL

@@
@@
-    PCI_DMA_TODEVICE
+    DMA_TO_DEVICE

@@
@@
-    PCI_DMA_FROMDEVICE
+    DMA_FROM_DEVICE

@@
@@
-    PCI_DMA_NONE
+    DMA_NONE

@@
expression e1, e2, e3;
@@
-    pci_alloc_consistent(e1, e2, e3)
+    dma_alloc_coherent(&e1->dev, e2, e3, GFP_)

@@
expression e1, e2, e3;
@@
-    pci_zalloc_consistent(e1, e2, e3)
+    dma_alloc_coherent(&e1->dev, e2, e3, GFP_)

@@
expression e1, e2, e3, e4;
@@
-    pci_free_consistent(e1, e2, e3, e4)
+    dma_free_coherent(&e1->dev, e2, e3, e4)

@@
expression e1, e2, e3, e4;
@@
-    pci_map_single(e1, e2, e3, e4)
+    dma_map_single(&e1->dev, e2, e3, e4)

@@
expression e1, e2, e3, e4;
@@
-    pci_unmap_single(e1, e2, e3, e4)
+    dma_unmap_single(&e1->dev, e2, e3, e4)

@@
expression e1, e2, e3, e4, e5;
@@
-    pci_map_page(e1, e2, e3, e4, e5)
+    dma_map_page(&e1->dev, e2, e3, e4, e5)

@@
expression e1, e2, e3, e4;
@@
-    pci_unmap_page(e1, e2, e3, e4)
+    dma_unmap_page(&e1->dev, e2, e3, e4)

@@
expression e1, e2, e3, e4;
@@
-    pci_map_sg(e1, e2, e3, e4)
+    dma_map_sg(&e1->dev, e2, e3, e4)

@@
expression e1, e2, e3, e4;
@@
-    pci_unmap_sg(e1, e2, e3, e4)
+    dma_unmap_sg(&e1->dev, e2, e3, e4)

@@
expression e1, e2, e3, e4;
@@
-    pci_dma_sync_single_for_cpu(e1, e2, e3, e4)
+    dma_sync_single_for_cpu(&e1->dev, e2, e3, e4)

@@
expression e1, e2, e3, e4;
@@
-    pci_dma_sync_single_for_device(e1, e2, e3, e4)
+    dma_sync_single_for_device(&e1->dev, e2, e3, e4)

@@
expression e1, e2, e3, e4;
@@
-    pci_dma_sync_sg_for_cpu(e1, e2, e3, e4)
+    dma_sync_sg_for_cpu(&e1->dev, e2, e3, e4)

@@
expression e1, e2, e3, e4;
@@
-    pci_dma_sync_sg_for_device(e1, e2, e3, e4)
+    dma_sync_sg_for_device(&e1->dev, e2, e3, e4)

@@
expression e1, e2;
@@
-    pci_dma_mapping_error(e1, e2)
+    dma_mapping_error(&e1->dev, e2)

@@
expression e1, e2;
@@
-    pci_set_dma_mask(e1, e2)
+    dma_set_mask(&e1->dev, e2)

@@
expression e1, e2;
@@
-    pci_set_consistent_dma_mask(e1, e2)
+    dma_set_coherent_mask(&e1->dev, e2)

Signed-off-by: default avatarChristophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      405e30e2
    • Christophe JAILLET's avatar
      mISDN: switch from 'pci_' to 'dma_' API · e85da794
      Christophe JAILLET authored 
      

The wrappers in include/linux/pci-dma-compat.h should go away.

The patch has been generated with the coccinelle script below and has been
hand modified to replace GFP_ with a correct flag.
It has been compile tested.

When memory is allocated in 'setup_hw()' (hfcpci.c) GFP_KERNEL can be used
because it is called from the probe function and no lock is taken.
The call chain is:
   hfc_probe()
   --> setup_card()
   --> setup_hw()

When memory is allocated in 'inittiger()' (netjet.c) GFP_ATOMIC must be
used because a spin_lock is taken by the caller (i.e. 'nj_init_card()')
This is also consistent with the other allocations done in the function.

@@
@@
-    PCI_DMA_BIDIRECTIONAL
+    DMA_BIDIRECTIONAL

@@
@@
-    PCI_DMA_TODEVICE
+    DMA_TO_DEVICE

@@
@@
-    PCI_DMA_FROMDEVICE
+    DMA_FROM_DEVICE

@@
@@
-    PCI_DMA_NONE
+    DMA_NONE

@@
expression e1, e2, e3;
@@
-    pci_alloc_consistent(e1, e2, e3)
+    dma_alloc_coherent(&e1->dev, e2, e3, GFP_)

@@
expression e1, e2, e3;
@@
-    pci_zalloc_consistent(e1, e2, e3)
+    dma_alloc_coherent(&e1->dev, e2, e3, GFP_)

@@
expression e1, e2, e3, e4;
@@
-    pci_free_consistent(e1, e2, e3, e4)
+    dma_free_coherent(&e1->dev, e2, e3, e4)

@@
expression e1, e2, e3, e4;
@@
-    pci_map_single(e1, e2, e3, e4)
+    dma_map_single(&e1->dev, e2, e3, e4)

@@
expression e1, e2, e3, e4;
@@
-    pci_unmap_single(e1, e2, e3, e4)
+    dma_unmap_single(&e1->dev, e2, e3, e4)

@@
expression e1, e2, e3, e4, e5;
@@
-    pci_map_page(e1, e2, e3, e4, e5)
+    dma_map_page(&e1->dev, e2, e3, e4, e5)

@@
expression e1, e2, e3, e4;
@@
-    pci_unmap_page(e1, e2, e3, e4)
+    dma_unmap_page(&e1->dev, e2, e3, e4)

@@
expression e1, e2, e3, e4;
@@
-    pci_map_sg(e1, e2, e3, e4)
+    dma_map_sg(&e1->dev, e2, e3, e4)

@@
expression e1, e2, e3, e4;
@@
-    pci_unmap_sg(e1, e2, e3, e4)
+    dma_unmap_sg(&e1->dev, e2, e3, e4)

@@
expression e1, e2, e3, e4;
@@
-    pci_dma_sync_single_for_cpu(e1, e2, e3, e4)
+    dma_sync_single_for_cpu(&e1->dev, e2, e3, e4)

@@
expression e1, e2, e3, e4;
@@
-    pci_dma_sync_single_for_device(e1, e2, e3, e4)
+    dma_sync_single_for_device(&e1->dev, e2, e3, e4)

@@
expression e1, e2, e3, e4;
@@
-    pci_dma_sync_sg_for_cpu(e1, e2, e3, e4)
+    dma_sync_sg_for_cpu(&e1->dev, e2, e3, e4)

@@
expression e1, e2, e3, e4;
@@
-    pci_dma_sync_sg_for_device(e1, e2, e3, e4)
+    dma_sync_sg_for_device(&e1->dev, e2, e3, e4)

@@
expression e1, e2;
@@
-    pci_dma_mapping_error(e1, e2)
+    dma_mapping_error(&e1->dev, e2)

@@
expression e1, e2;
@@
-    pci_set_dma_mask(e1, e2)
+    dma_set_mask(&e1->dev, e2)

@@
expression e1, e2;
@@
-    pci_set_consistent_dma_mask(e1, e2)
+    dma_set_coherent_mask(&e1->dev, e2)

Signed-off-by: default avatarChristophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      e85da794
    • Briana Oursler's avatar
      tc-testing: Add tdc to kselftests · 2b9843fb
      Briana Oursler authored 
      

Add tdc to existing kselftest infrastructure so that it can be run with
existing kselftests. TDC now generates objects in objdir/kselftest
without cluttering main objdir, leaves source directory clean, and
installs correctly in kselftest_install, properly adding itself to
run_kselftest.sh script.

Add tc-testing as a target of selftests/Makefile. Create tdc.sh to run
tdc.py targets with correct arguments. To support single target from
selftest/Makefile, combine tc-testing/bpf/Makefile and
tc-testing/Makefile. Move action.c up a directory to tc-testing/.

Tested with:
 make O=/tmp/{objdir} TARGETS="tc-testing" kselftest
 cd /tmp/{objdir}
 cd kselftest
 cd tc-testing
 ./tdc.sh

 make -C tools/testing/selftests/ TARGETS=tc-testing run_tests

 make TARGETS="tc-testing" kselftest
 cd tools/testing/selftests
 ./kselftest_install.sh /tmp/exampledir
 My VM doesn't run all the kselftests so I commented out all except my
 target and net/pmtu.sh then:
 cd /tmp/exampledir && ./run_kselftest.sh

Co-developed-by: default avatarDavide Caratti <dcaratti@redhat.com>
Signed-off-by: default avatarDavide Caratti <dcaratti@redhat.com>
Signed-off-by: default avatarBriana Oursler <briana.oursler@gmail.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      2b9843fb
    • Vinay Kumar Yadav's avatar
      crypto/chtls: Enable tcp window scaling option · c3466a76
      Vinay Kumar Yadav authored 
      

Enable tcp window scaling option in hw based on sysctl settings
and option in connection request.

v1->v2:
- Set window scale option based on option in connection request.

Signed-off-by: default avatarVinay Kumar Yadav <vinay.yadav@chelsio.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      c3466a76
    • David S. Miller's avatar
      Merge branch 'net-atlantic-various-features' · 4f1b4da5
      David S. Miller authored 
      Mark Starovoytov says:

====================
net: atlantic: various features

This patchset adds more features for Atlantic NICs:
 * media detect;
 * additional per-queue stats;
 * PTP stats;
 * ipv6 support for TCP LSO and UDP GSO;
 * 64-bit operations;
 * A0 ntuple filters;
 * MAC temperature (hwmon).

This work is a joint effort of Marvell developers.

v3:
 * reworked patches related to stats:
   . fixed u64_stats_update_* usage;
   . use simple assignment in _get_stats / _fill_stats_data;
   . made _get_sw_stats / _fill_stats_data return count as return value;
   . split rx and tx per-queue stats;

v2: https://patchwork.ozlabs.org/cover/1329652/
 * removed media detect feature (will be reworked and submitted later);
 * removed irq counter from stats;
 * use u64_stats_update_* to protect 64-bit stats;
 * use io-64-nonatomic-lo-hi.h for readq/writeq fallbacks;

v1: https://patchwork.ozlabs.org/cover/1327894/


====================

Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      4f1b4da5
    • Mark Starovoytov's avatar
      net: atlantic: add hwmon getter for MAC temperature · 8dcf2ad3
      Mark Starovoytov authored 
      

This patch adds the possibility to obtain MAC temperature via hwmon.
On A1 there are two separate temperature sensors.
On A2 there's only one temperature sensor, which is used for reporting
both MAC and PHY temperature.

Signed-off-by: default avatarMark Starovoytov <mstarovoitov@marvell.com>
Signed-off-by: default avatarIgor Russkikh <irusskikh@marvell.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      8dcf2ad3
    • Dmitry Bogdanov's avatar
      net: atlantic: A0 ntuple filters · a89df867
      Dmitry Bogdanov authored 
      

This patch adds support for ntuple filters on A0.

Signed-off-by: default avatarDmitry Bogdanov <dbogdanov@marvell.com>
Signed-off-by: default avatarMark Starovoytov <mstarovoitov@marvell.com>
Signed-off-by: default avatarIgor Russkikh <irusskikh@marvell.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      a89df867