- Sep 24, 2022
-
-
Linus Walleij authored
The driver includes the legacy <linux/gpio.h> header but uses <linux/gpio/consumer.h>. Cc: Dinesh Ram <Dinesh.Ram@cern.ch> Cc: Eduardo Valentin <edubezval@gmail.com> Signed-off-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by:
Mauro Carvalho Chehab <mchehab@kernel.org>
-
Linus Walleij authored
This driver is using GPIO descriptors but uses the legacy include header <linux/gpio.h>. Fix it by including the intended <linux/gpio/consumer.h>. Cc: Marek Vasut <marex@denx.de> Signed-off-by:
-
Hans Verkuil authored
Add support for this new CEC message. This was added in HDMI 2.1a. Signed-off-by:
-
Hans Verkuil authored
Fix a compiler warning: drivers/media/dvb-frontends/drxk_hard.c: In function 'drxk_read_ucblocks': drivers/media/dvb-frontends/drxk_hard.c:6673:21: warning: 'err' may be used uninitialized [-Wmaybe-uninitialized] 6673 | *ucblocks = (u32) err; | ^~~~~~~~~ drivers/media/dvb-frontends/drxk_hard.c:6663:13: note: 'err' was declared here 6663 | u16 err; | ^~~ Signed-off-by: -
Hans Verkuil authored
The type ops for equal, init and validate have an elems argument, but this can be taken from struct v4l2_ctrl: ctrl->elems for equal and init, and ctrl->new_elems for validate (since you are validating a new control value). So drop this argument and update all callers. Signed-off-by:
-
Ming Qian authored
release m2m ctx in the callback function that release the vpu instance, then there is no need to add lock around releasing m2m ctx. Fixes: 3cd08451 ("media: amphion: add vpu v4l2 m2m support") Signed-off-by:
Ming Qian <ming.qian@nxp.com> Reviewed-by:
Tommaso Merciai <tommaso.merciai@amarulasolutions.com> Signed-off-by:
-
Philipp Zabel authored
coda9_jpeg_dec_huff_setup() never returns anything but 0. Drop return value and superfluous error handling at the call site. Signed-off-by:
Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by:
-
Jilin Yuan authored
Delete the redundant word 'is'. Signed-off-by:
Jilin Yuan <yuanjilin@cdjrlc.com> Signed-off-by:
-
Jilin Yuan authored
Delete the redundant word 'my'. Signed-off-by:
-
Jilin Yuan authored
Delete the redundant word 'for'. Signed-off-by:
-
Hans Verkuil authored
I expect that the hardware will have limited this to 16, but just in case it hasn't, check for this corner case. Signed-off-by:
-
Hans Verkuil authored
I expect that the hardware will have limited this to 16, but just in case it hasn't, check for this corner case. Signed-off-by:
-
Laurent Pinchart authored
The local sd_fmt variable in rkisp1_capture_link_validate() has uninitialized fields, which causes random failures when calling the subdev .get_fmt() operation. Fix it by initializing the variable when declaring it, which zeros all other fields. Signed-off-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by:
Paul Elder <paul.elder@ideasonboard.com> Reviewed-by:
Dafna Hirschfeld <dafna@fastmail.com> Signed-off-by:
-
Laurent Pinchart authored
The ISP8000Nano v18.02 (found in the i.MX8MP) requires the ISP to be enabled (as indicated by the ISP_CTRL.ISP_ENABLE bit) to configure the lens shading table in internal RAM. The driver currently configures all ISP initial parameters before enabling the ISP, which causes the LSC RAM to not be initialized properly. To fix this, split the rkisp1_params_configure() function into a rkisp1_params_pre_configure() and a rkisp1_params_post_configure(). The former configures all ISP parameters but LSC, while the latter configures LSC. To implement this, the rkisp1_params_apply_params_cfg() function is deconstructed, with two small helpers created to deal with the parameters buffers, which are then used in rkisp1_params_isr(), rkisp1_params_pre_configure() and rkisp1_params_post_configure(). While this initialization ordering is only needed for the ISP8000Nano v18.02, it doesn't affect other ISP versions negatively, and can thus be followed unconditionally. Signed-off-by:
-
Laurent Pinchart authored
The rkisp1_lsc_config() function incorrectly uses the RKISP1_CIF_ISP_LSC_SECT_SIZE() macro for the gradient registers. Replace it with the correct macro, and rename it from RKISP1_CIF_ISP_LSC_GRAD_SIZE() to RKISP1_CIF_ISP_LSC_SECT_GRAD() as the corresponding registers store the gradients for each sector, not a size. This doesn't cause any functional change as the two macros are defined identically (the size and gradient registers store fields in the same number of bits at the same positions). Signed-off-by:
-
Laurent Pinchart authored
The LSC module x/y size and grad configuration is stored in a set of 4 indexed registers each. The rkisp1-regs.h header defines all those registers, but only the first one in each set is used, with manual calculation of addresses of subsequent registers. Simplifies this by merging all 4 register macros into one that takes the index as a parameter. No functional change intended. Signed-off-by:
-
Laurent Pinchart authored
Use the u32 type instead of unsigned int to store register values in the LSC configuration code, to make the variables' size more explicit. No functional change intended. Signed-off-by:
-
Laurent Pinchart authored
Clean up the LSC configuration code to improve its readability by shortening lines, using extra local variables and renaming long variables. No functional change intended. Signed-off-by:
-
Laurent Pinchart authored
The resizer doesn't deal with color spaces, so it can accept any color space on its input, and propagates it unchanged to its output. When operating with a Bayer input format (in pass-through mode) further restrict the YCbCr encoding and quantization to Rec 601 and full range respectively, as for raw data the former ought to be ignored and the latter is always full range. Signed-off-by:
-
Laurent Pinchart authored
Initialize the four color space fields on the sink and source video pads of the resizer in the .init_cfg() operation. The resizer can't perform any color space conversion, so set the sink and source color spaces to the same defaults, which match the ISP source video pad default. Signed-off-by:
-
Laurent Pinchart authored
The driver currently only implements the Rec. 601 YCbCr encoding, extend it with support for the other encodings defined by V4L2 (Rec. 709, Rec. 2020 and SMPTE240m). The coefficients have been calculated by rounding the floating point values to the nearest Q1.7 fixed-point value, adjusting the rounding to ensure that the sum of each line in the matrix is preserved to avoid overflows. At the hardware level, the RGB to YUV conversion matrix is fully configurable, custom encoding could be supported by extending the ISP parameters if desired. Signed-off-by:
-
Laurent Pinchart authored
The rkisp1_csm_config() function takes a pointer to the rkisp1_params structure which contains the quantization value. There's no need to pass it separately to the function. Drop it from the function parameters. Signed-off-by:
-
Laurent Pinchart authored
The rkisp1_config_isp() function uses the format on the sink pad of the ISP to configure quantization at the output of the ISP. This is incorrect, as hinted by the src_frm variable name that stores the format. Fix it by using the source pad. Signed-off-by:
-
Laurent Pinchart authored
The ISP output color space is configured through the ISP source pad. At the moment, only the quantization can be set. Extend it to the three other color space fields: - The ycbcr_enc field will be used to configure the RGB to YUV matrix (currently hardcoded to Rec. 601). - The colorspace (which controls the color primaries) and xfer_func fields will not be used to configure the ISP, as the corresponding hardware blocks (the cross-talk RGB to RGB matrix and the tone mapping curve) are programmed directly by applications through ISP parameters. Nonetheless, those two fields should be set by applications to match the ISP configuration, in order to propagate the correct color space down the pipeline up to the capture video nodes. Signed-off-by:
-
Laurent Pinchart authored
The ISP converts Bayer data to YUV when operating normally, and can also operate in pass-through mode where the input and output formats must match. Converting from YUV to Bayer isn't possible. If such an invalid configuration is attempted, adjust it by copying the sink pad media bus code to the source pad. Signed-off-by:
-
Laurent Pinchart authored
The ISP accepts different color spaces on its input: for YUV input, it doesn't set any restrictions, and for Bayer inputs, any color primaries or transfer function can be accepted (YCbCr encoding isn't applicable there, and quantization range can only be full). Allow setting a color space on the ISP sink pad, with the aforementioned restrictions. The settings don't influence hardware yet (only the YUV quantization range will, anything else has no direct effect on the ISP configuration), but can already be set to allow color space information to be coherent across the ISP sink link. Signed-off-by:
-
Laurent Pinchart authored
Initialize the four color space fields on the sink and source video pads of the ISP in the .init_cfg() operation. As the main use case for the ISP is to convert Bayer data to YUV, select a raw color space on the sink pad and a limited range quantization of SYCC on the source pad by default. Signed-off-by:
-
Laurent Pinchart authored
Extend the UAPI rkisp1-config.h header with macros for all DPCC configuration fields. While at it, clarify of fix issues in the DPCC documentation. Signed-off-by:
-
Laurent Pinchart authored
Restrict the DPCC configuration that can be set by userspace to valid register bits. To do so, reorganize the related register macros to define valid bitmasks, as well as bits of the DPCC mode register. Signed-off-by:
-
Laurent Pinchart authored
The rkisp1_dpcc_config() function looks over methods sets to configure them, but sets the RKISP1_CIF_ISP_DPCC_METHODS_SET_* registers outside of the loop with hand-unrolled code. Move this to the loop to simplify the code. Signed-off-by:
-
Sean Young authored
By rounding down, the actual timeout can be lower than requested. As a result, long spaces just below the requested timeout can be incorrectly reported as timeout and truncated. Fixes: 877f1a7c ("media: rc: mceusb: allow the timeout to be configurable") Cc: stable@vger.kernel.org Signed-off-by:
Sean Young <sean@mess.org> Signed-off-by:
-
ye xingchen authored
Return the value send_packet() directly instead of storing it in another redundant variable. Reported-by:
Zeal Robot <zealci@zte.com.cn> Signed-off-by:
ye xingchen <ye.xingchen@zte.com.cn> Signed-off-by:
-
Alan Stern authored
Automatic kernel fuzzing led to a WARN about invalid pipe direction in the mceusb driver: ------------[ cut here ]------------ usb 6-1: BOGUS control dir, pipe 80000380 doesn't match bRequestType 40 WARNING: CPU: 0 PID: 2465 at drivers/usb/core/urb.c:410 usb_submit_urb+0x1326/0x1820 drivers/usb/core/urb.c:410 Modules linked in: CPU: 0 PID: 2465 Comm: kworker/0:2 Not tainted 5.19.0-rc4-00208-g69cb6c65 #1 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-1ubuntu1.1 04/01/2014 Workqueue: usb_hub_wq hub_event RIP: 0010:usb_submit_urb+0x1326/0x1820 drivers/usb/core/urb.c:410 Code: 7c 24 40 e8 ac 23 91 fd 48 8b 7c 24 40 e8 b2 70 1b ff 45 89 e8 44 89 f1 4c 89 e2 48 89 c6 48 c7 c7 a0 30 a9 86 e8 48 07 11 02 <0f> 0b e9 1c f0 ff ff e8 7e 23 91 fd 0f b6 1d 63 22 83 05 31 ff 41 RSP: 0018:ffffc900032becf0 EFLAGS: 00010282 RAX: 0000000000000000 RBX: ffff8881100f3058 RCX: 0000000000000000 RDX: ffffc90004961000 RSI: ffff888114c6d580 RDI: fffff52000657d90 RBP: ffff888105ad90f0 R08: ffffffff812c3638 R09: 0000000000000000 R10: 0000000000000005 R11: ffffed1023504ef1 R12: ffff888105ad9000 R13: 0000000000000040 R14: 0000000080000380 R15: ffff88810ba96500 FS: 0000000000000000(0000) GS:ffff88811a800000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007ffe810bda58 CR3: 000000010b720000 CR4: 0000000000350ef0 Call Trace: <TASK> usb_start_wait_urb+0x101/0x4c0 drivers/usb/core/message.c:58 usb_internal_control_msg drivers/usb/core/message.c:102 [inline] usb_control_msg+0x31c/0x4a0 drivers/usb/core/message.c:153 mceusb_gen1_init drivers/media/rc/mceusb.c:1431 [inline] mceusb_dev_probe+0x258e/0x33f0 drivers/media/rc/mceusb.c:1807 The reason for the warning is clear enough; the driver sends an unusual read request on endpoint 0 but does not set the USB_DIR_IN bit in the bRequestType field. More importantly, the whole situation can be avoided and the driver simplified by converting it over to the relatively new usb_control_msg_recv() and usb_control_msg_send() routines. That's what this fix does. Reported-and-tested-by:
Rondreis <linhaoguo86@gmail.com> Link: https://lore.kernel.org/all/CAB7eexLLApHJwZfMQ=X-PtRhw0BgO+5KcSMS05FNUYejJXqtSA@mail.gmail.com/ Signed-off-by:
Alan Stern <stern@rowland.harvard.edu> Cc: stable@vger.kernel.org Signed-off-by:
-
- Sep 09, 2022
-
-
Lukas Bulwahn authored
The config EMBEDDED selects EXPERT, i.e., when EMBEDDED is enabled, EXPERT is usually also enabled. Hence, it sufficient to have the option MEDIA_SUPPORT_FILTER set to y if !EXPERT. This way, MEDIA_SUPPORT_FILTER does not refer to CONFIG_EMBEDDED anymore and allows us to remove CONFIG_EMBEDDED in the close future. Remove the reference to CONFIG_EMBEDDED in MEDIA_SUPPORT_FILTER. Link: https://lore.kernel.org/linux-media/20220908104337.11940-4-lukas.bulwahn@gmail.com Signed-off-by:
Lukas Bulwahn <lukas.bulwahn@gmail.com> Reviewed-by:
-
- Aug 31, 2022
-
-
Ezequiel Garcia authored
The Hantro mainline driver has been used in production since several years and was only kept as a staging driver due the stateless CODEC controls. Now that all the stateless CODEC controls have been moved out of staging, graduate the driver as well. Signed-off-by:
Ezequiel Garcia <ezequiel@vanguardiasur.com.ar> Signed-off-by:
-
- Aug 30, 2022
-
-
Moudy Ho authored
This patch adds driver for MediaTek's Media Data Path ver.3 (MDP3). It provides the following functions: color transform, format conversion, resize, crop, rotate, flip and additional image quality enhancement. The MDP3 driver is mainly used for Google Chromebook products to import the new architecture to set the HW settings as shown below: User -> V4L2 framework -> MDP3 driver -> SCP (setting calculations) -> MDP3 driver -> CMDQ (GCE driver) -> HW Each modules' related operation control is sited in mtk-mdp3-comp.c Each modules' register table is defined in file with "mdp_reg_" prefix GCE related API, operation control sited in mtk-mdp3-cmdq.c V4L2 m2m device functions are implemented in mtk-mdp3-m2m.c Probe, power, suspend/resume, system level functions are defined in mtk-mdp3-core.c [hverkuil: add 'depends on REMOTEPROC'] Signed-off-by:Ping-Hsun Wu <ping-hsun.wu@mediatek.com> Signed-off-by:
daoyuan huang <daoyuan.huang@mediatek.com> Signed-off-by:
Moudy Ho <moudy.ho@mediatek.com> Tested-by:
AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Signed-off-by:
-
Moudy Ho authored
This patch adds DT binding documentation for MediaTek's CCORR and WDMA components. These components exist in both MediaTek's Media Data Path 3(MDP3) and DRM, and the bindings are placed under the folder "./soc/mediatek" to prevent duplicate builds. Signed-off-by:
Rob Herring <robh@kernel.org> Reviewed-by:
-
Moudy Ho authored
This patch adds DT binding documents for Media Data Path 3 (MDP3) a unit in multimedia system combined with several components and used for scaling and color format convert. Signed-off-by:
-
Miaoqian Lin authored
of_get_child_by_name() returns a node pointer with refcount incremented, we should use of_node_put() on it when not need anymore. Add missing of_node_put() to avoid refcount leak. Fixes: df330515 ("[media] v4l: xilinx: Add Xilinx Video IP core") Signed-off-by:
Miaoqian Lin <linmq006@gmail.com> Signed-off-by:
-
Volodymyr Kharuk authored
Extend the xilinx video driver with Y12_1X12 greyscale format Signed-off-by:
Volodymyr Kharuk <vkh@melexis.com> Signed-off-by:
-
