- Nov 17, 2010
-
-
Alexander Duyck authored
This change makes it so that we perform link setup with interrupts disabled. If the SFP has not been detected previously we will schedule the SFP detection task to run in order to detect link. By doing this we avoid the possibility of interrupts firing in the middle of our link setup during ixgbe_up_complete. In addition this change makes it so that the multi-speed fiber setup and SFP setup are not mutually exclusive. The addresses issues seen in which a link would only come up at 1G on some multi-speed fiber modules. Signed-off-by:
Alexander Duyck <alexander.h.duyck@intel.com> Tested-by:
Ross Brattain <ross.b.brattain@intel.com> Signed-off-by:
Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-
Alexander Duyck authored
This change adds a set of state flags to the rings that allow them to independently function allowing for features like RSC, packet split, and TX hang detection to be done per ring instead of for the entire device. This is accomplished by re-purposing the flow director reinit_state member and making it a global state instead since a long for a single bit flag is a bit wasteful. Signed-off-by:
-
Alexander Duyck authored
This is the start of work to sort out what belongs in the rings and what belongs in the q_vector. Items like the CPU variable for make much more sense in the q_vector since the CPU is a per-interrupt thing rather than a per ring thing. I also added a back-pointer from the ring to the q_vector. Signed-off-by:
-
Alexander Duyck authored
This change moves an adapter pointer into the private portion of the pci_dev instead of a pointer to the netdev. The reason for this change is because in most cases we just want the adapter anyway. In addition as we start moving toward multiple netdevs per port we may want to move the adapter pointer out of the netdevs entirely. Signed-off-by:
-
Alexander Duyck authored
Missed some code that was left floating around in the DCB configuration for the TXDCTL register. As a result the register was being messed with in two different spots when we only needed to do the change once. Signed-off-by:
-
Alexander Duyck authored
The main reason for this change is to keep the suspend/resume logic matched up. The clear_interrupt_scheme function will disable MSI-X which will effect the PCIe configuration space. Therefore we will want to do it before we save state to avoid having the interrupt state restored by pci_restore_state, and then trying to re-enable MSI/MSI-X interrupts via ixgbe_setup_interrupt_scheme. Signed-off-by:
-
Alexander Duyck authored
This change places a netdev pointer directly into the ring structure. This way we can avoid having to determine which netdev we are supposed to be using and can just access the one on the ring directly. As a result of this change further collapse of the code is possible by dropping the adapter from ixgbe_alloc_rx_buffers, and the netdev pointer from ixgbe_xmit_frame_ring_adv and ixgbe_maybe_stop_tx. Signed-off-by:
-
Alexander Duyck authored
This change moved some of the RX and TX stats into separate structures and them placed those structures in a union in order to help reduce the size of the ring structure. Signed-off-by:
-
Alexander Duyck authored
This change is meant to simplify DMA map/unmap by providing a device pointer. As a result the adapter pointer can be dropped from many of the calls. Signed-off-by:
-
Alexander Duyck authored
This change drops ring->head since it is not used in any hot-path and can easily be determined using IXGBE_[RT]DH(ring->reg_idx). It also changes ring->tail into a true pointer so we can avoid unnecessary pointer math to find the location of the tail. In addition I also dropped the setting of head and tail in ixgbe_clean_[rx|tx]_ring. The only location that should be setting the head and tail values is ixgbe_configure_[rx|tx]_ring and that is only while the queue is disabled. Signed-off-by:
-
Alexander Duyck authored
This change re-orders alloc_rx_buffers to make better use of the packet split enabled flag. The new setup should require less branching in the code since now we are down to fewer if statements since we either are handling packet split or aren't. Signed-off-by:
-
Alexander Duyck authored
This change simplifies the work being done by the TX interrupt handler and pushes it into the tx_map call. This allows for fewer cache misses since the TX cleanup now accesses almost none of the skb members. Signed-off-by:
-
Alexander Duyck authored
There is no need to reset the adapter when changing the Rx checksum settings. Since the only change is a software flag we can disable it without needing to reset the entire adapter. Signed-off-by:
-
John Fastabend authored
The maximum credits per traffic class only needs to be greater then the TSO size for 82598 devices. The 82599 devices do not have this requirement so only do this test for 82598 devices. Signed-off-by:
John Fastabend <john.r.fastabend@intel.com> Tested-by:
-
John Fastabend authored
Currently the high and low water marks for PFC are being set conservatively for jumbo frames. This means the RX buffers are being underutilized in the default 1500 MTU. This patch fixes this so that the water marks are set as described in the data sheet considering the MTU size. The equation used is, RTT * 1.44 + MTU * 1.44 + MTU Where RTT is the round trip time and MTU is the max frame size in KB. To avoid floating point arithmetic FC_HIGH_WATER is defined ((((RTT + MTU) * 144) + 99) / 100) + MTU This changes how the hardware field fc.low_water and fc.high_water are used. With this change they are no longer storing the actual low water and high water markers but are storing the required head room in the buffer. This simplifies the logic and we do not need to account for the size of the buffer when setting the thresholds. Testing with iperf and 16 threads showed a slight uptick in throughput over a single traffic class .1-.2Gbps and a reduction in pause frames. Without the patch a 30 second run would show ~10-15 pause frames being transmitted with the patch ~2-5 are seen. Test were run back to back with 82599. Note RXPBSIZE is in KB and low and high water marks fields are also in KB. However the FCRT* registers are 32B granularity and right shifted 5 into the register, (((rx_pbsize - water_mark) * 1024) / 32) << 5 is the most explicit conversion here we simplify (rx_pbsize - water_mark) * 32 << 5 = (rx_pbsize - water_mark) << 10 This patch updates the PFC thresholds and legacy FC thresholds. Signed-off-by:
-
Greg Rose authored
Update version string and copyright notice. Signed-off-by:
Greg Rose <gregory.v.rose@intel.com> Tested-by:
Emil Tantilov <emil.s.tantilov@intel.com> Signed-off-by:
-
Eric Dumazet authored
"cat /proc/net/dev" uses RCU protection only. Its quite possible we call a driver get_stats() method while device is dismantling and freeing its data structures. So get_stats() methods must be very careful not accessing driver private data without appropriate locking. In ixgbe case, we access rx_ring pointers. These pointers are freed in ixgbe_clear_interrupt_scheme() and set to NULL, this can trigger NULL dereference in ixgbe_get_stats64() A possible fix is to use RCU locking in ixgbe_get_stats64() and defer rx_ring freeing after a grace period in ixgbe_clear_interrupt_scheme() Signed-off-by:
Eric Dumazet <eric.dumazet@gmail.com> Reported-by:
-
Eric Dumazet authored
Right now, fields in struct sock are not optimally ordered, because each path (RX softirq, TX completion, RX user, TX user) has to touch fields that are contained in many different cache lines. The really critical thing is to shrink number of cache lines that are used at RX softirq time : CPU handling softirqs for a device can receive many frames per second for many sockets. If load is too big, we can drop frames at NIC level. RPS or multiqueue cards can help, but better reduce latency if possible. This patch starts with UDP protocol, then additional patches will try to reduce latencies of other ones as well. At RX softirq time, fields of interest for UDP protocol are : (not counting ones in inet struct for the lookup) Read/Written: sk_refcnt (atomic increment/decrement) sk_rmem_alloc & sk_backlog.len (to check if there is room in queues) sk_receive_queue sk_backlog (if socket locked by user program) sk_rxhash sk_forward_alloc sk_drops Read only: sk_rcvbuf (sk_rcvqueues_full()) sk_filter sk_wq sk_policy[0] sk_flags Additional notes : - sk_backlog has one hole on 64bit arches. We can fill it to save 8 bytes. - sk_backlog is used only if RX sofirq handler finds the socket while locked by user. - sk_rxhash is written only once per flow. - sk_drops is written only if queues are full Final layout : [1] One section grouping all read/write fields, but placing rxhash and sk_backlog at the end of this section. [2] One section grouping all read fields in RX handler (sk_filter, sk_rcv_buf, sk_wq) [3] Section used by other paths I'll post a patch on its own to put sk_refcnt at the end of struct sock_common so that it shares same cache line than section [1] New offsets on 64bit arch : sizeof(struct sock)=0x268 offsetof(struct sock, sk_refcnt) =0x10 offsetof(struct sock, sk_lock) =0x48 offsetof(struct sock, sk_receive_queue)=0x68 offsetof(struct sock, sk_backlog)=0x80 offsetof(struct sock, sk_rmem_alloc)=0x80 offsetof(struct sock, sk_forward_alloc)=0x98 offsetof(struct sock, sk_rxhash)=0x9c offsetof(struct sock, sk_rcvbuf)=0xa4 offsetof(struct sock, sk_drops) =0xa0 offsetof(struct sock, sk_filter)=0xa8 offsetof(struct sock, sk_wq)=0xb0 offsetof(struct sock, sk_policy)=0xd0 offsetof(struct sock, sk_flags) =0xe0 Instead of : sizeof(struct sock)=0x270 offsetof(struct sock, sk_refcnt) =0x10 offsetof(struct sock, sk_lock) =0x50 offsetof(struct sock, sk_receive_queue)=0xc0 offsetof(struct sock, sk_backlog)=0x70 offsetof(struct sock, sk_rmem_alloc)=0xac offsetof(struct sock, sk_forward_alloc)=0x10c offsetof(struct sock, sk_rxhash)=0x128 offsetof(struct sock, sk_rcvbuf)=0x4c offsetof(struct sock, sk_drops) =0x16c offsetof(struct sock, sk_filter)=0x198 offsetof(struct sock, sk_wq)=0x88 offsetof(struct sock, sk_policy)=0x98 offsetof(struct sock, sk_flags) =0x130 Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Eric Dumazet authored
UDP sockets refcount is usually 2, unless an incoming frame is going to be queued in receive or backlog queue. Using atomic_inc_not_zero_hint() permits to reduce latency, because processor issues less memory transactions. Signed-off-by:
-
Eric Dumazet authored
Now vlan are lockless, we dont need special ndo_select_queue() logic. dev_pick_tx() will do the multiqueue stuff on the real device transmit. Suggested-by:
Jesse Gross <jesse@nicira.com> Signed-off-by:
Patrick McHardy <kaber@trash.net> Signed-off-by:
-
Eric Dumazet authored
vlan is a stacked device, like tunnels. We should use the lockless mechanism we are using in tunnels and loopback. This patch completely removes locking in TX path. tx stat counters are added into existing percpu stat structure, renamed from vlan_rx_stats to vlan_pcpu_stats. Note : this partially reverts commit 2e59af3d (vlan: multiqueue vlan device) Signed-off-by:
-
Eric Dumazet authored
macvlan is a stacked device, like tunnels. We should use the lockless mechanism we are using in tunnels and loopback. This patch completely removes locking in TX path. tx stat counters are added into existing percpu stat structure, renamed from rx_stats to pcpu_stats. Note : this reverts commit 2c114553 (macvlan: add multiqueue capability) Note : rx_errors converted to a 32bit counter, like tx_dropped, since they dont need 64bit range. Signed-off-by:
-
Neil Horman authored
packet: Enhance AF_PACKET implementation to not require high order contiguous memory allocation (v4) MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Version 4 of this patch. Change notes: 1) Removed extra memset. Didn't think kcalloc added a GFP_ZERO the way kzalloc did :) Summary: It was shown to me recently that systems under high load were driven very deep into swap when tcpdump was run. The reason this happened was because the AF_PACKET protocol has a SET_RINGBUFFER socket option that allows the user space application to specify how many entries an AF_PACKET socket will have and how large each entry will be. It seems the default setting for tcpdump is to set the ring buffer to 32 entries of 64 Kb each, which implies 32 order 5 allocation. Thats difficult under good circumstances, and horrid under memory pressure. I thought it would be good to make that a bit more usable. I was going to do a simple conversion of the ring buffer from contigous pages to iovecs, but unfortunately, the metadata which AF_PACKET places in these buffers can easily span a page boundary, and given that these buffers get mapped into user space, and the data layout doesn't easily allow for a change to padding between frames to avoid that, a simple iovec change is just going to break user space ABI consistency. So I've done this, I've added a three tiered mechanism to the af_packet set_ring socket option. It attempts to allocate memory in the following order: 1) Using __get_free_pages with GFP_NORETRY set, so as to fail quickly without digging into swap 2) Using vmalloc 3) Using __get_free_pages with GFP_NORETRY clear, causing us to try as hard as needed to get the memory The effect is that we don't disturb the system as much when we're under load, while still being able to conduct tcpdumps effectively. Tested successfully by me. Signed-off-by:
Neil Horman <nhorman@tuxdriver.com> Acked-by:
Maciej Żenczykowski <zenczykowski@gmail.com> Reported-by:
-
Joe Perches authored
Using %pV reduces the number of printk calls and eliminates any possible message interleaving from other printk calls. Signed-off-by:
Joe Perches <joe@perches.com> Signed-off-by:
-
Jan Engelhardt authored
The changed functions do not modify the NL messages and/or attributes at all. They should use const (similar to strchr), so that callers which have a const nlmsg/nlattr around can make use of them without casting. While at it, constify a data array. Signed-off-by:
Jan Engelhardt <jengelh@medozas.de> Signed-off-by:
-
John Fastabend authored
Fix ref count bug introduced by commit 2de79570 Author: Lorenzo Colitti <lorenzo@google.com> Date: Wed Oct 27 18:16:49 2010 +0000 ipv6: addrconf: don't remove address state on ifdown if the address is being kept Fix logic so that addrconf_ifdown() decrements the inet6_ifaddr refcnt correctly with in6_ifa_put(). Reported-by:
Stephen Hemminger <shemminger@vyatta.com> Signed-off-by:
-
-
- Nov 16, 2010
-
-
David S. Miller authored
ERROR: "netif_get_vlan_features" [drivers/net/xen-netfront.ko] undefined! Reported-by:
Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by:
-
Vasanthy Kolluri authored
Fix data type of argument passed to pci_alloc_consistent and pci_free_consistent routines. Signed-off-by:
Vasanthy Kolluri <vkolluri@cisco.com> Signed-off-by:
Roopa Prabhu <roprabhu@cisco.com> Signed-off-by:
David Wang <dwang2@cisco.com> Signed-off-by:
-
Alan Cox authored
Fallout from the TIOCGICOUNT work Signed-off-by:
Alan Cox <alan@linux.intel.com> Signed-off-by:
-
Eric Dumazet authored
br_port_get() renamed to br_port_get_rtnl() to make clear RTNL is held. Signed-off-by:
-
stephen hemminger authored
The macro br_port_exists() is not enough protection when only RCU is being used. There is a tiny race where other CPU has cleared port handler hook, but is bridge port flag might still be set. Signed-off-by:
-
stephen hemminger authored
Suggested by Eric's bridge RCU changes. Signed-off-by:
-
Eric Dumazet authored
Add br_should_route_hook_t typedef, this is the only way we can get a clean RCU implementation for function pointer. Move route_hook to location where it is used. Signed-off-by:
-
Eric Dumazet authored
Add modern __rcu annotatations to bridge multicast table. Use newer hlist macros to avoid direct access to hlist internals. Signed-off-by:
-
Joe Perches authored
Signed-off-by:
-
Joe Perches authored
Signed-off-by:
Sjur Braendeland <sjur.brandeland@stericsson.com> Signed-off-by:
-
Joe Perches authored
Signed-off-by:
-
Joe Perches authored
Signed-off-by:
-
Joe Perches authored
Signed-off-by:
-
