Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Convert rel_info to host-endian before calling ip6_tnl_err().
The things become much more straightforward that way.
The key observation (and the reason why that code actually
worked) is that after ip6_tnl_err() we either immediately
bailed out or had rel_info set to 0 or had it set to host-endian
and guaranteed to hit
(rel_type == ICMP_DEST_UNREACH && rel_code == ICMP_FRAG_NEEDED)
case.  So inconsistent endianness didn't really lead to bugs,
but it had been subtle and prone to breakage.  New variant is
saner and obviously safe.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

no real bugs, just misannotations cropping up

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

struct bin_attribute * is needed in bin_attribute ->read()/->write()
now.  Incidentally, could people please run the fscking compiler
before and after applying their patch and compare the build logs?
That (and many, many other) would be caught immediately.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Use setup_irq() instead of request_irq() to set up system timer
in 68328 timer code. With the old m68knommu irq code this
was safe, but it is not now within the generic irq framework.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Use setup_irq() instead of request_irq() to set up system timer
in ColdFire PIT timer code. With the old m68knommu irq code this
was safe, but it is not now within the generic irq framework.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Remove the unused mach_trap_init function pointer. All use of it
removed with change to using generic irq framework.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Use setup_irq() instead of request_irq() to set up system timer
in ColdFire simple timer code. With the old m68knommu irq code this
was safe, but it is not now within the generic irq framework.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

The switch to using the generic irq framework removed the
coldfire_trap_init() code, so remove all references to it.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Use setup_irq() instead of request_irq() to set up system timer
in 68360 timer code. With the old m68knommu irq code this
was safe, but it is not now within the generic irq framework.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Create prototype for ack_bad_irq() for m68knommu.
Compilation of kernel/irq/handle.c fails without it.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6:
  [IA64] Nail two more simple section mismatch errors
  [IA64] fix section mismatch warnings
  [IA64] rename partial_page
  [IA64] Ensure that machvec is set up takes place before serial console
  [IA64] vector-domain - fix vector_table
  [IA64] vector-domain - handle assign_irq_vector(AUTO_ASSIGN)

* git://git.kernel.org/pub/scm/linux/kernel/git/sam/kbuild:
  kbuild: fix modpost warnings for xtensa
  kbuild: be more foregiving on init section naming
  kbuild: rearrange a few function in modpost
  kbuild: use LDFLAGS_MODULE only for .ko links
  kconfig: remove unused members from struct symbol
  kconfig: attach help text to menus
  kbuild: fix up printing of Linux C Library version in scripts/ver_linux
  kbuild: do not do section mismatch checks on vmlinux in 2nd pass

The Xtensa architecture places literal pools in sections separate
from the instructions. The corresponsing text sections, therefore,
reference the .literal section, and we have to suppress those
warnings.

The naming convention defines the name for a literal
section as .SECTION.literal, unless .SECTION is .text. In that case
the name is only .literal. Using strncmp() instead of strcmp()
to compare the from-section with .SECTION.init.refok in pattern 0
should not cause any regressions for other architectures.

We also need to suppress warnings for two informational
sections (.xt.lit and .xt.prop) used by the Xtensa architecture.

Signed-off-by: Chris Zankel <chris@zankel.net>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>

pcibios_setup (between 'pci_setup' and 'quirk_mellanox_tavor')
setup_profiling_timer (between 'write_profile' and 'delayed_put_task_struct')

Signed-off-by: Tony Luck <tony.luck@intel.com>

In 741f98fe

 Sam added full
checking across the entire vmlinux image.  This flushed out
a dozen new section mismatch warnings.  Start the whack-a-mole
game again to stomp them out.

Signed-off-by: Tony Luck <tony.luck@intel.com>

Jens has added a partial_page thing in splice whcih conflicts with the ia64
one.  Rename ia64 out of the way.  (ia64 chose poorly).

Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Tony Luck <tony.luck@intel.com>

In the whitelist function of modpost now use the same
check to identify init_section as in other places of modpost.
This has the effect that we now recognize sections named
.init.text.19 as init sections and we no longer warn
when we see these.

At the same time make surrounding code readable by dropping
use of temporary flags.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>

This is a preparational patch that just move
two functions and add one (for now unused) function.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>

Sam Ravnborg pointed out that Documentation/kbuild/makefiles.txt already
says this is what it's for.  This patch makes the reality live up to the
documentation.  This fixes the problem of LDFLAGS_BUILD_ID getting into too
many places.

Signed-off-by: Roland McGrath <roland@redhat.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>

dep and dep2 in struct symbol was unused - remove them.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Roman Zippel <zippel@linux-m68k.org>

Roman Zippel wrote:
> A simple example would be
> help texts, right now they are per symbol, but they should really be per
> menu, so archs can provide different help texts for something.

This patch does this and at the same time introduce a few API
funtions used to access the help text.

The relevant api functions are introduced in the various frontends.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Roman Zippel <zippel@linux-m68k.org>

I noticed, when running scripts/ver_linux on both a Gentoo system
and a Slackware system, that the line printing the C library
version looked a little odd. So I fixed it up to be in line with
all the rest.

  Old output:
    Linux C Library        > libc.2.5
  New output:
    Linux C Library        2.5

Signed-off-by: Jesper Juhl <jesper.juhl@gmail.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>

We already check and warn about section mismatches from vmlinux
(build as vmlinux.o) during first pass so skip the checks
during the 2nd pass where we process modules.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>

struct apm_bios_info uses "unsigned short" and "unsigned long"
to mean u16 and u32 respectively.  Correct.

Signed-off-by: H. Peter Anvin <hpa@zytor.com>

Make "struct ist_info" valid on both i386 and x86-64, and use the
structure by name in the setup code.  Additionally, "Intel SpeedStep
IST" is redundant, refer to it as IST consistently.

Signed-off-by: H. Peter Anvin <hpa@zytor.com>

Fix missing letters in the structure members of struct efi_info.

Signed-off-by: H. Peter Anvin <hpa@zytor.com>

For APM calls, BX contains the device index, which is zero for
the system BIOS.  Disconnect requres BX = 0.

Signed-off-by: H. Peter Anvin <hpa@zytor.com>

Starting with kernel 2.6.23-rc1, the i386 APM driver fails
on several of my machines with the message:

apm: BIOS not found

This happens because of a bug in the i386 boot code rewrite
from assembler to C. The original assembly code had the
following code in its APM BIOS presence test (boot/setup.S):

	andw	$0x02, %cx			# Is 32 bit supported?
	je	done_apm_bios			# No 32-bit, no (good) APM BIOS

That is, the code bails out if bit 2 is zero.

In the new C version, this is coded as (boot/apm.c):

	if (cx & 0x02)		/* 32 bits supported? */
		return -1;

Here we see that the test has been accidentally inverted.

The fix is to negate the test. I've verified that this
allows the APM driver to work again on my affected machines.

Signed-off-by: Mikael Pettersson <mikpe@it.uu.se>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/selinux-2.6:
  SELinux: null-terminate context string in selinux_xfrm_sec_ctx_alloc

* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6:
  ACPI: Kconfig: remove CONFIG_ACPI_SLEEP from source
  ACPI: quiet ACPI Exceptions due to no _PTC or _TSS
  ACPI: Remove references to ACPI_STATE_S2 from acpi_pm_enter
  ACPI: Kconfig: always enable CONFIG_ACPI_SLEEP on X86
  ACPI: Kconfig: fold /proc/acpi/sleep under CONFIG_ACPI_PROCFS
  ACPI: Kconfig: CONFIG_ACPI_PROCFS now defaults to N
  ACPI: autoload modules - Create __mod_acpi_device_table symbol for all ACPI drivers
  ACPI: autoload modules - Create ACPI alias interface
  ACPI: autoload modules - ACPICA modifications
  ACPI: asus-laptop: Fix failure exits
  ACPI: fix oops due to typo in new throttling code
  ACPI: ignore _PSx method for hotplugable PCI devices
  ACPI: Use ACPI methods to select PCI device suspend state
  ACPI, PNP: hook ACPI D-state to PNP suspend/resume
  ACPI: Add acpi_pm_device_sleep_state helper routine
  ACPI: Implement the set_target() callback from pm_ops