- Dec 02, 2021
-
-
Flora Cui authored
since vkms support atomic KMS interface Signed-off-by:
Flora Cui <flora.cui@amd.com> Reviewed-by:
Guchun Chen <guchun.chen@amd.com> Acked-by:
Alex Deucher <aleander.deucher@amd.com> Reviewed-by:
Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
-
Flora Cui authored
otherwise adev->mode_info.crtcs[] is NULL Signed-off-by:
-
Flora Cui authored
Signed-off-by:
-
Christophe JAILLET authored
The 'doorbell_bitmap' bitmap has just been allocated. So we can use the non-atomic '__set_bit()' function to save a few cycles as no concurrent access can happen. Reviewed-by:
Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by:
Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by:
-
Christophe JAILLET authored
'doorbell_bitmap' and 'queue_slot_bitmap' are bitmaps. So use 'bitmap_zalloc()' to simplify code, improve the semantic and avoid some open-coded arithmetic in allocator arguments. Also change the corresponding 'kfree()' into 'bitmap_free()' to keep consistency. Reviewed-by:
-
Lv Ruyi authored
Both of split and merge are pointers, not arrays. Reviewed-by:
Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Reported-by:
Zeal Robot <zealci@zte.com.cn> Signed-off-by:
Lv Ruyi <lv.ruyi@zte.com.cn> Signed-off-by:
-
Jane Jian authored
[WHY] for sriov odd# vf will modify vcn0 engine ip revision(due to multimedia bandwidth feature), which will be mismatched with original vcn0 revision [HOW] add new version check for vcn0 disabled revision(3, 0, 192), typically modified under sriov mode Signed-off-by:
Jane Jian <Jane.Jian@amd.com> Reviewed-by:
-
Jiapeng Chong authored
Fix the following coccicheck warning: ./drivers/gpu/drm/amd/display/dc/dml/dsc/rc_calc_fpu.c:96:14-15: WARNING comparing pointer to 0. Reported-by:
Abaci Robot <abaci@linux.alibaba.com> Signed-off-by:
Jiapeng Chong <jiapeng.chong@linux.alibaba.com> Reviewed-by:
-
Nicholas Kazlauskas authored
[Why] PSR currently relies on the kernel's delayed vblank on/off mechanism as an implicit bufferring mechanism to prevent excessive entry/exit. Without this delay the user experience is impacted since it can take a few frames to enter/exit. [How] Only allow vblank disable immediate for DC when psr is not supported. Leave a TODO indicating that this support should be extended in the future to delay independent of the vblank interrupt. Fixes: 92020e81 ("drm/amdgpu/display: set vblank_disable_immediate for DC") Acked-by:
Harry Wentland <harry.wentland@amd.com> Signed-off-by:
Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by:
-
- Nov 25, 2021
-
-
Alex Deucher authored
Update the bios scratch register when updating the backlight level. Some platforms apparently read this scratch register and do additional operations in their hotkey handlers. Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1518 Reviewed-by:
-
Alex Deucher authored
The overclocking interface currently appends data to a string. Revert back to using sprintf(). Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1774 Fixes: 6db0c87a ("amdgpu/pm: Replace hwmgr smu usage of sprintf with sysfs_emit") Acked-by:
Evan Quan <evan.quan@amd.com> Acked-by:
Christian König <christian.koenig@amd.com> Signed-off-by:
-
Lijo Lazar authored
There is no need for additional programming, keep the default settings. Signed-off-by:
Lijo Lazar <lijo.lazar@amd.com> Reviewed-by:
Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by:
-
Yang Wang authored
fix some byteorder issues about amdgpu discovery. This will result in running errors on the big end system. (e.g:MIPS) Signed-off-by:
Yang Wang <KevinYang.Wang@amd.com> Reviewed-by:
-
Philip Yang authored
If xnack is on, VM retry fault interrupt send to IH ring1, and ring1 will be full quickly. IH cannot receive other interrupts, this causes deadlock if migrating buffer using sdma and waiting for sdma done while handling retry fault. Remove VMC from IH storm client, enable ring1 write pointer overflow, then IH will drop retry fault interrupts and be able to receive other interrupts while driver is handling retry fault. IH ring1 write pointer doesn't writeback to memory by IH, and ring1 write pointer recorded by self-irq is not updated, so always read the latest ring1 write pointer from register. Signed-off-by:
Philip Yang <Philip.Yang@amd.com> Reviewed-by:
-
Philip Yang authored
By default this timestamp is 32 bit counter. It gets overflowed in around 10 minutes. Signed-off-by:
-
Philip Yang authored
unmap range always increase atomic svms->drain_pagefaults to simplify both parent range and child range unmap, page fault handle ignores the retry fault if svms->drain_pagefaults is set to speed up interrupt handling. svm_range_drain_retry_fault restart draining if another range unmap from cpu. Signed-off-by:
-
Philip Yang authored
VMA may be removed before unmap notifier callback, and deferred list work remove range, return success for this special case as we are handling stale retry fault. Signed-off-by:
-
Philip Yang authored
kfd_process_wq_release drain retry fault to ensure no retry fault comes after removing kfd process from the hash table, otherwise svm page fault handler will fail to recover the fault and dump GPU vm fault log. Refactor deferred list work to get_task_mm and take mmap write lock to handle all ranges, and avoid mm is gone while inserting mmu notifier. Signed-off-by:
-
Philip Yang authored
Otherwise when IH process restart, count is zero, the loop will not exit to wake_up_all after processing AMDGPU_IH_MAX_NUM_IVS interrupts. Signed-off-by:
-
Surbhi Kakarya authored
Fill voltage fields in metrics table. Signed-off-by:
Surbhi Kakarya <Surbhi.Kakarya@amd.com> Acked-by:
-
Luben Tuikov authored
Print the error on command submission immediately after submitting to the SMU. This is rate-limited. It helps to immediately know there was an error on command submission, rather than leave it up to clients to report the error, as sometimes they do not. Cc: Alex Deucher <Alexander.Deucher@amd.com> Signed-off-by:
Luben Tuikov <luben.tuikov@amd.com> Acked-by:
-
Luben Tuikov authored
Add a print in sienna_cichlid_run_btc() to help debug and to mirror other platforms, as no print is present in the caller, smu_smc_hw_setup(). Cc: Alex Deucher <Alexander.Deucher@amd.com> Signed-off-by:
-
Luben Tuikov authored
Add prints where there are none and none are printed in the callee. Remove the word "previous" from comment and print to make it shorter and avoid confusion in various prints. Cc: Alex Deucher <Alexander.Deucher@amd.com> Signed-off-by:
-
Evan Quan authored
After switching to generic framebuffer framework, we rely on the ->dumb_create routine for frame buffer creation. However, the different domain flags used are not optimal. Add the contiguous flag to directly allocate the scanout BO as one linear buffer. Fixes: 087451f3 ("drm/amdgpu: use generic fb helpers instead of setting up AMD own's.") Signed-off-by:
-
Ramesh Errabolu authored
Fixes warning report from kernel test robot Reported-by:
kernel test robot <lkp@intel.com> Signed-off-by:
Ramesh Errabolu <Ramesh.Errabolu@amd.com> Reviewed-by:
-
Alex Deucher authored
Renoir and newer gfx9 APUs have new TSC register that is not part of the gfxoff tile, so it can be read without needing to disable gfx off. Acked-by:
-
Alex Deucher authored
Apply the same check we do for dGPUs for APUs as well. Acked-by:
-
shaoyunl authored
Fixes: 9f4f2c1a ("drm/amd/amdgpu: fix the kfd pre_reset sequence in sriov") For sriov XGMI configuration, the host driver will handle the hive reset, so in guest side, the reset_sriov only be called once on one device. This will make kfd post_reset unblanced with kfd pre_reset since kfd pre_reset already been moved out of reset_sriov function. Move kfd post_reset out of reset_sriov function to make them balance . Signed-off-by:
shaoyunl <shaoyun.liu@amd.com> Reviewed-by:
-
Aric Cyr authored
This version brings along the following: - FW promotion to 0.0.94 - Enable seamless boot for DCN301 - Improvements in bandwidth validation - Fixes in flags update, link encoder assignments, DSC, ODM combine and more Acked-by:
Qingqing Zhuo <qingqing.zhuo@amd.com> Signed-off-by:
Aric Cyr <aric.cyr@amd.com> Tested-by:
Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by:
-
Anthony Koo authored
[Why & How] - Remove tick count definition since it can be different per HW revision Acked-by:
Anthony Koo <Anthony.Koo@amd.com> Tested-by:
-
Martin Leung authored
[Why & How] when changing some code we accidentally changed else if-> if. reverting that. Reviewed-by:
Martin Leung <Martin.Leung@amd.com> Tested-by:
-
sungwang authored
[Why] When systme power up and eDP lit up by VBIOS, in the core_link_enable_stream(), the function will early return due to apply apply_edp_fast_boot_optimization, resulting the DP_PIXEL_COMBINE cannot get set in enc3_dp_set_odm_combine. [How] Check ODM PIPE to avoid early return. Reviewed-by:
Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Acked-by:
Danny Wang <danny.wang@amd.com> Tested-by:
-
Yi-Ling Chen authored
[WHY] Due to pass the wrong parameter down to the enable_stream_gating(), it would cause the DSC of the removing stream would not be PG. [HOW] To pass the correct parameter down th the enable_stream_gating(). Reviewed-by:
Yi-Ling Chen <Yi-Ling.Chen2@amd.com> Tested-by:
-
Nevenko Stupar authored
[Why] display_object_info_table_v1_5 with atom_display_object_path_v3 will be used. [How] Add bios parser support for display_object_info_table_v1_5 with atom_display_object_path_v3 for all existing, in use bios records as well as for new records: ATOM_CONNECTOR_CAP_RECORD_TYPE, ATOM_CONNECTOR_SPEED_UPTO and ATOM_BRACKET_LAYOUT_V2_RECORD_TYPE. Reviewed-by:
Jun Lei <Jun.Lei@amd.com> Acked-by:
Nevenko Stupar <Nevenko.Stupar@amd.com> Tested-by:
-
Mikita Lipski authored
[why/how] Fixing -Wint-in-bool-context Clang Build Failure Reviewed-by:
Nicholas Choi <Nicholas.Choi@amd.com> Acked-by:
Mikita Lipski <mikita.lipski@amd.com> Tested-by:
-
Sung Joon Kim authored
[why] Need to keep track of number of references to stream pointer. [how] Call stream retain/release whenever necessary in link_enc table assignment sequence. Reviewed-by:
Sung Joon Kim <sungkim@amd.com> Tested-by:
-
Zhan Liu authored
[Why] Rename function name so it aligns with other resource function names being used by dcn10. [How] Rename function name for consistency. Reviewed-by:
Ahmad Othman <Ahmad.Othman@amd.com> Acked-by:
Zhan Liu <Zhan.Liu@amd.com> Tested-by:
-
Nicholas Kazlauskas authored
[Why] A warning appears in the log on GPU reset for link_enc_cfg_link_encs_assign for the following condition: ASSERT(state->res_ctx.link_enc_cfg_ctx.link_enc_assignments[i].valid == false); This is not expected behavior and may result in link encoders being incorrectly assigned. [How] The dc->current_state is backed up into dm->cached_dc_state before we commit 0 streams. DC will clear link encoder assignments on the real state but the changes won't propagate over to the copy we made before the 0 streams commit. DC expects that link encoder assignments are *not* valid when committing a state, so as a workaround it needs to be cleared before passing it back into DC. Reviewed-by:
-
Guo, Bing authored
[Why] OPTC_BYTES_PER_PIXEL calculation for 4:2:2 and 4:2:0 could have error. [How] Change to use following formula: OPTC_DSC_BYTES_PER_PIXEL = ceiling((chunk size * 2^28) / slice width) v2: squash in 64 bit divide fix (Alex) Reviewed-by:
Wenjing Liu <Wenjing.Liu@amd.com> Acked-by:
Bing Guo <Bing.Guo@amd.com> Tested-by:
-
- Nov 23, 2021
-
-
Nicholas Kazlauskas authored
[Why] We're only setting the flags on stream[0]'s planes so this logic fails if we have more than one stream in the state. This can cause a page flip timeout with multiple displays in the configuration. [How] Index into the stream_status array using the stream index - it's a 1:1 mapping. Fixes: cdaae837 ("drm/amd/display: Handle GPU reset for DC block") Reviewed-by:
-
