The pin configuration for PMIC DVS (pmic-dvs-2 and pmic-dvs-3) are
exactly the same, so merge them.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Link: https://lore.kernel.org/r/20220111201426.326777-7-krzysztof.kozlowski@canonical.com

Using node paths to extend or override a device tree node is error
prone.  If there was a typo error, a new node will be created instead of
extending the existing node.  This will lead to run-time errors that
could be hard to detect.

A mistyped label on the other hand, will cause a dtc compile error
(during build time).

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com>
Link: https://lore.kernel.org/r/20220111201426.326777-6-krzysztof.kozlowski@canonical.com

The pin configuration for PMIC DVS (pmic-dvs-2 and pmic-dvs-3) are
exactly the same, so merge them.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Link: https://lore.kernel.org/r/20220111201426.326777-5-krzysztof.kozlowski@canonical.com

The PIN_OUT/PIN_OUT_SET/PIN_CFG defines for pin controller pin
configuration are not used.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com>
Link: https://lore.kernel.org/r/20220111201426.326777-4-krzysztof.kozlowski@canonical.com

The gpa1-4 pin was put twice in UART3 pin configuration of Exynos5250,
instead of proper pin gpa1-5.

Fixes: f8bfe2b0

 ("ARM: dts: add pin state information in client nodes for Exynos5 platforms")
Cc: <stable@vger.kernel.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com>
Link: https://lore.kernel.org/r/20211230195325.328220-1-krzysztof.kozlowski@canonical.com

Merge tag 'samsung-pinctrl-5.18' of https://git.kernel.org/pub/scm/linux/kernel/git/pinctrl/samsung into for-v5.18/dt-pinctrl

Samsung pinctrl drivers changes for v5.18

1. Fix OF reference leak in pinctrl driver probe error path.
2. Correct list of handlers for Exynos850 ALIVE and CMGP pin banks.
3. Accept devicetrees with GPIO pin bank definitions named with a
   "-gpio-bank" suffix.  This is necessary for later Samsung pinctrl
   bindings dtschema.
4. Convert Samsung pinctrl bindings to dtschema.
5. Add support for Exynos850 and ExynosAutov9 wake-up interrupts.

This merge is necessary to apply DTS cleanup patches, which in turn
silences any warnings from newly introduced dtschema for Samsung pinctrl
driver.  The merge brings driver changes and mentioned dtschema.  The
driver change is the dependency for follow-up DTS patches which rename
GPIO bank nodes.  With the change in DTS files, the new schema passes
without errors.

It seems that newer ARMv8 Exynos SoC like Exynos850 and
ExynosAutov9 have differences of their pin controller node capable of
external wake-up interrupts:
1. No multiplexed external wake-up interrupt, only direct,
2. More than one pin controller capable of external wake-up interrupts.

Add support for dedicated Exynos850 and ExynosAutov9 compatibles.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Reviewed-by: Sam Protsenko <semen.protsenko@linaro.org>
Reviewed-by: Chanho Park <chanho61.park@samsung.com>
Tested-by: Chanho Park <chanho61.park@samsung.com>
Link: https://lore.kernel.org/r/20220111201722.327219-20-krzysztof.kozlowski@canonical.com

Older Samsung Exynos SoCs  (Exynos3250, Exynos4, Exynos5, Exynos5433)
expected pin controller node with external wake-up interrupts to have
one interrupt for multiplexing these wake-up interrupts.  Also they
expected to have exactly one such pin controller (capable of external
wake-up interrupts).

It seems however that newer ARMv8 Exynos SoCs like Exynos850 and
ExynosAutov9 have differences of their pin controllers capable of
external wake-up interrupts:
1. No multiplexed external wake-up interrupt, only direct,
2. More than one pin controller capable of external wake-up interrupts.

Add dedicated Exynos850 and ExynosAutov9 compatibles.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Reviewed-by: Sam Protsenko <semen.protsenko@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220111201722.327219-19-krzysztof.kozlowski@canonical.com

Convert the Samsung SoC (S3C24xx, S3C64xx, S5Pv210, Exynos) pin
controller bindings to DT schema format.  Parts of description and DTS
example was copied from existing sources, so keep the license as
GPL-2.0-only.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Reviewed-by: Sam Protsenko <semen.protsenko@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20220111201722.327219-18-krzysztof.kozlowski@canonical.com

Existing dt-bindings expected that each GPIO/pin bank within pin
controller has its own node with name matching the bank (e.g. gpa0,
gpx2) and "gpio-controller" property.  The node name is then used for
matching between driver data and DTS.

Newly introduced dtschema expects to have nodes ending with "-gpio-bank"
suffix, so rewrite bank-devicetree matching to look for old and new
style of naming.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Reviewed-by: Sam Protsenko <semen.protsenko@linaro.org>
Link: https://lore.kernel.org/r/20220111201426.326777-3-krzysztof.kozlowski@canonical.com

GPIO_ALIVE and GPIO_CMGP blocks in Exynos850 SoC don't have EINT
capabilities (like EINT_SVC register), and there are no corresponding
interrupts wired to GIC. Instead those blocks have wake-up interrupts
for each pin. The ".eint_gpio_init" callbacks were specified by mistake
for these blocks, when porting pinctrl code from downstream kernel. That
leads to error messages like this:

    samsung-pinctrl 11850000.pinctrl: irq number not available

Remove ".eint_gpio_init" for pinctrl_alive and pinctrl_gpmc to fix this
error. This change doesn't affect proper interrupt handling for related
pins, as all those pins are handled in ".eint_wkup_init".

Fixes: cdd3d945

 ("pinctrl: samsung: Add Exynos850 SoC specific data")
Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
Link: https://lore.kernel.org/r/20220114203757.4860-1-semen.protsenko@linaro.org


Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>

The driver iterates over its devicetree children with
for_each_child_of_node() and stores for later found node pointer.  This
has to be put in error paths to avoid leak during re-probing.

Fixes: ab663789

 ("pinctrl: samsung: Match pin banks with their device nodes")
Cc: <stable@vger.kernel.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Reviewed-by: Sam Protsenko <semen.protsenko@linaro.org>
Reviewed-by: Chanho Park <chanho61.park@samsung.com>
Link: https://lore.kernel.org/r/20220111201426.326777-2-krzysztof.kozlowski@canonical.com

Merge tag 'perf-tools-for-v5.17-2022-01-22' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux

Pull more perf tools updates from Arnaldo Carvalho de Melo:

 - Fix printing 'phys_addr' in 'perf script'.

 - Fix failure to add events with 'perf probe' in ppc64 due to not
   removing leading dot (ppc64 ABIv1).

 - Fix cpu_map__item() python binding building.

 - Support event alias in form foo-bar-baz, add pmu-events and
   parse-event tests for it.

 - No need to setup affinities when starting a workload or attaching to
   a pid.

 - Use path__join() to compose a path instead of ad-hoc snprintf()
   equivalent.

 - Override attr->sample_period for non-libpfm4 events.

 - Use libperf cpumap APIs instead of accessing the internal state
   directly.

 - Sync x86 arch prctl headers and files changed by the new
   set_mempolicy_home_node syscall with the kernel sources.

 - Remove duplicate include in cpumap.h.

 - Remove redundant err variable.

* tag 'perf-tools-for-v5.17-2022-01-22' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux:
  perf tools: Remove redundant err variable
  perf test: Add parse-events test for aliases with hyphens
  perf test: Add pmu-events test for aliases with hyphens
  perf parse-events: Support event alias in form foo-bar-baz
  perf evsel: Override attr->sample_period for non-libpfm4 events
  perf cpumap: Remove duplicate include in cpumap.h
  perf cpumap: Migrate to libperf cpumap api
  perf python: Fix cpu_map__item() building
  perf script: Fix printing 'phys_addr' failure issue
  tools headers UAPI: Sync files changed by new set_mempolicy_home_node syscall
  tools headers UAPI: Sync x86 arch prctl headers with the kernel sources
  perf machine: Use path__join() to compose a path instead of snprintf(dir, '/', filename)
  perf evlist: No need to setup affinities when disabling events for pid targets
  perf evlist: No need to setup affinities when enabling events for pid targets
  perf stat: No need to setup affinities when starting a workload
  perf affinity: Allow passing a NULL arg to affinity__cleanup()
  perf probe: Fix ppc64 'perf probe add events failed' case

Pull ftrace fix from Steven Rostedt:
 "Fix s390 breakage from sorting mcount tables.

  The latest merge of the tracing tree sorts the mcount table at build
  time. But s390 appears to do things differently (like always) and
  replaces the sorted table back to the original unsorted one. As the
  ftrace algorithm depends on it being sorted, bad things happen when it
  is not, and s390 experienced those bad things.

  Add a new config to tell the boot if the mcount table is sorted or
  not, and allow s390 to opt out of it"

* tag 'trace-v5.17-3' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
  ftrace: Fix assuming build time sort works for s390

To speed up the boot process, as mcount_loc needs to be sorted for ftrace
to work properly, sorting it at build time is more efficient than boot up
and can save milliseconds of time. Unfortunately, this change broke s390
as it will modify the mcount_loc location after the sorting takes place
and will put back the unsorted locations. Since the sorting is skipped at
boot up if it is believed that it was sorted at run time, ftrace can crash
as its algorithms are dependent on the list being sorted.

Add a new config BUILDTIME_MCOUNT_SORT that is set when
BUILDTIME_TABLE_SORT but not if S390 is set. Use this config to determine
if sorting should take place at boot up.

Link: https://lore.kernel.org/all/yt9dee51ctfn.fsf@linux.ibm.com/

Fixes: 72b3942a

 ("scripts: ftrace - move the sort-processing in ftrace_init")
Reported-by: Sven Schnelle <svens@linux.ibm.com>
Tested-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>

Merge tag 'kbuild-fixes-v5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild

Pull Kbuild fixes from Masahiro Yamada:

 - Bring include/uapi/linux/nfc.h into the UAPI compile-test coverage

 - Revert the workaround of CONFIG_CC_IMPLICIT_FALLTHROUGH

 - Fix build errors in certs/Makefile

* tag 'kbuild-fixes-v5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
  certs: Fix build error when CONFIG_MODULE_SIG_KEY is empty
  certs: Fix build error when CONFIG_MODULE_SIG_KEY is PKCS#11 URI
  Revert "Makefile: Do not quote value for CONFIG_CC_IMPLICIT_FALLTHROUGH"
  usr/include/Makefile: add linux/nfc.h to the compile-test coverage

Pull bitmap updates from Yury Norov:

 - introduce for_each_set_bitrange()

 - use find_first_*_bit() instead of find_next_*_bit() where possible

 - unify for_each_bit() macros

* tag 'bitmap-5.17-rc1' of git://github.com/norov/linux:
  vsprintf: rework bitmap_list_string
  lib: bitmap: add performance test for bitmap_print_to_pagebuf
  bitmap: unify find_bit operations
  mm/percpu: micro-optimize pcpu_is_populated()
  Replace for_each_*_bit_from() with for_each_*_bit() where appropriate
  find: micro-optimize for_each_{set,clear}_bit()
  include/linux: move for_each_bit() macros from bitops.h to find.h
  cpumask: replace cpumask_next_* with cpumask_first_* where appropriate
  tools: sync tools/bitmap with mother linux
  all: replace find_next{,_zero}_bit with find_first{,_zero}_bit where appropriate
  cpumask: use find_first_and_bit()
  lib: add find_first_and_bit()
  arch: remove GENERIC_FIND_FIRST_BIT entirely
  include: move find.h from asm_generic to linux
  bitops: move find_bit_*_le functions from le.h to find.h
  bitops: protect find_first_{,zero}_bit properly

Return value from perf_event__process_tracing_data() directly instead
of taking this in another redundant variable.

Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: Minghao Chi <chi.minghao@zte.com.cn>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lore.kernel.org/lkml/20220112080109.666800-1-chi.minghao@zte.com.cn


Signed-off-by: CGEL ZTE <cgel.zte@gmail.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Add a test which allows us to test parsing an event alias with hyphens.

Since these events typically do not exist on most host systems, add the
alias to the fake pmu.

Function perf_pmu__test_parse_init() has terms added to match known test
aliases.

Signed-off-by: John Garry <john.garry@huawei.com>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Qi Liu <liuqi115@huawei.com>
Cc: Shaokun Zhang <zhangshaokun@hisilicon.com>
Cc: linuxarm@huawei.com
Link: https://lore.kernel.org/r/1642432215-234089-4-git-send-email-john.garry@huawei.com


Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Add a test for aliases with hyphens in the name to ensure that the
pmu-events tables are as expects. There should be no reason why these sort
of aliases would be treated differently, but no harm in checking.

Signed-off-by: John Garry <john.garry@huawei.com>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Qi Liu <liuqi115@huawei.com>
Cc: Shaokun Zhang <zhangshaokun@hisilicon.com>
Cc: linuxarm@huawei.com
Link: https://lore.kernel.org/r/1642432215-234089-3-git-send-email-john.garry@huawei.com


Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Event aliasing for events whose name in the form foo-bar-baz is not
supported, while foo-bar, foo_bar_baz, and other combinations are, i.e.
two hyphens are not supported.

The HiSilicon D06 platform has events in such form:

  $ ./perf list sdir-home-migrate

  List of pre-defined events (to be used in -e):

  uncore hha:
    sdir-home-migrate
   [Unit: hisi_sccl,hha]

  $ sudo ./perf stat -e sdir-home-migrate
  event syntax error: 'sdir-home-migrate'
                          \___ parser error
  Run 'perf list' for a list of valid events

   Usage: perf stat [<options>] [<command>]

   -e, --event <event>event selector. use 'perf list' to list available events

To support, add an extra PMU event symbol type for "baz", and add a new
rule in the bison file.

Signed-off-by: John Garry <john.garry@huawei.com>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Qi Liu <liuqi115@huawei.com>
Cc: Shaokun Zhang <zhangshaokun@hisilicon.com>
Cc: linuxarm@huawei.com
Link: https://lore.kernel.org/r/1642432215-234089-2-git-send-email-john.garry@huawei.com


Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

A previous patch preventing "attr->sample_period" values from being
overridden in pfm events changed a related behaviour in arm-spe.

Before said patch:

  perf record -c 10000 -e arm_spe_0// -- sleep 1

Would yield an SPE event with period=10000. After the patch, the period
in "-c 10000" was being ignored because the arm-spe code initializes
sample_period to a non-zero value.

This patch restores the previous behaviour for non-libpfm4 events.

Fixes: ae5dcc8a

 (“perf record: Prevent override of attr->sample_period for libpfm4 events”)
Reported-by: Chase Conklin <chase.conklin@arm.com>
Signed-off-by: German Gomez <german.gomez@arm.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: John Fastabend <john.fastabend@gmail.com>
Cc: KP Singh <kpsingh@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Martin KaFai Lau <kafai@fb.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Song Liu <songliubraving@fb.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Yonghong Song <yhs@fb.com>
Cc: bpf@vger.kernel.org
Cc: netdev@vger.kernel.org
Link: http://lore.kernel.org/lkml/20220118144054.2541-1-german.gomez@arm.com


Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Remove all but the first include of stdbool.h from cpumap.h.

Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: Lv Ruyi <lv.ruyi@zte.com.cn>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20220117083730.863200-1-lv.ruyi@zte.com.cn


Signed-off-by: CGEL ZTE <cgel.zte@gmail.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Switch from directly accessing the perf_cpu_map to using the appropriate
libperf API when possible. Using the API simplifies the job of
refactoring use of perf_cpu_map.

Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexey Bayduraev <alexey.v.bayduraev@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: André Almeida <andrealmeid@collabora.com>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Darren Hart <dvhart@infradead.org>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Dmitriy Vyukov <dvyukov@google.com>
Cc: Eric Dumazet <edumazet@google.com>
Cc: German Gomez <german.gomez@arm.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: John Garry <john.garry@huawei.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Miaoqian Lin <linmq006@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Riccardo Mancini <rickyman7@gmail.com>
Cc: Shunsuke Nakamura <nakamura.shun@fujitsu.com>
Cc: Song Liu <song@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Stephen Brennan <stephen.s.brennan@oracle.com>
Cc: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Cc: Yury Norov <yury.norov@gmail.com>
Link: http://lore.kernel.org/lkml/20220122045811.3402706-3-irogers@google.com


Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Value should be built as an integer.

Switch some uses of perf_cpu_map to use the library API.

Fixes: 6d18804b

 ("perf cpumap: Give CPUs their own type")
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexey Bayduraev <alexey.v.bayduraev@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: André Almeida <andrealmeid@collabora.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Darren Hart <dvhart@infradead.org>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Dmitriy Vyukov <dvyukov@google.com>
Cc: Eric Dumazet <edumazet@google.com>
Cc: German Gomez <german.gomez@arm.com>
Cc: Ian Rogers <irogers@google.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: John Garry <john.garry@huawei.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Miaoqian Lin <linmq006@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Riccardo Mancini <rickyman7@gmail.com>
Cc: Shunsuke Nakamura <nakamura.shun@fujitsu.com>
Cc: Song Liu <song@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Stephen Brennan <stephen.s.brennan@oracle.com>
Cc: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Cc: Yury Norov <yury.norov@gmail.com>
Link: http://lore.kernel.org/lkml/20220122045811.3402706-2-irogers@google.com


Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Perf script was failed to print the phys_addr for SPE profiling.
One 'dummy' event is added by SPE profiling but it doesn't have PHYS_ADDR
attribute set, perf script then exits with error.

Now referring to 'addr', use evsel__do_check_stype() to check the type.

Before:

  # perf record -e arm_spe_0/branch_filter=0,ts_enable=1,pa_enable=1,load_filter=1,jitter=0,\
		store_filter=0,min_latency=0,event_filter=2/ -p 4064384 -- sleep 3
  # perf script -F pid,tid,addr,phys_addr
  Samples for 'dummy:u' event do not have PHYS_ADDR attribute set. Cannot print 'phys_addr' field.

After:

  # perf record -e arm_spe_0/branch_filter=0,ts_enable=1,pa_enable=1,load_filter=1,jitter=0,\
		store_filter=0,min_latency=0,event_filter=2/ -p 4064384 -- sleep 3
  # perf script -F pid,tid,addr,phys_addr
  4064384/4064384 ffff802f921be0d0      2f921be0d0
  4064384/4064384 ffff802f921be0d0      2f921be0d0

Reviewed-by: German Gomez <german.gomez@arm.com>
Signed-off-by: Yao Jin <jinyao5@huawei.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Hanjun Guo <guohanjun@huawei.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20220121065954.2121900-1-liwei391@huawei.com


Signed-off-by: Wei Li <liwei391@huawei.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Since b8c96a6b ("certs: simplify $(srctree)/ handling and remove
config_filename macro"), when CONFIG_MODULE_SIG_KEY is empty,
signing_key.x509 fails to build:

    CERT    certs/signing_key.x509
  Usage: extract-cert <source> <dest>
  make[1]: *** [certs/Makefile:78: certs/signing_key.x509] Error 2
  make: *** [Makefile:1831: certs] Error 2

Pass "" to the first argument of extract-cert to fix the build error.

Link: https://lore.kernel.org/linux-kbuild/20220120094606.2skuyb26yjlnu66q@lion.mk-sys.cz/T/#u
Fixes: b8c96a6b

 ("certs: simplify $(srctree)/ handling and remove config_filename macro")
Reported-by: Michal Kubecek <mkubecek@suse.cz>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Tested-by: Michal Kubecek <mkubecek@suse.cz>

When CONFIG_MODULE_SIG_KEY is PKCS#11 URL (pkcs11:*), signing_key.x509
fails to build:

  certs/Makefile:77: *** target pattern contains no '%'.  Stop.

Due to the typo, $(X509_DEP) contains a colon.

Fix it.

Fixes: b8c96a6b

 ("certs: simplify $(srctree)/ handling and remove config_filename macro")
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>

This reverts commit cd8c917a.

Commit 129ab0d2

 ("kbuild: do not quote string values in
include/config/auto.conf") provided the final solution.

Now reverting the temporary workaround.

Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>

As linux/nfc.h userspace compilation was finally fixed by commits
79b69a83 ("nfc: uapi: use kernel size_t to fix user-space builds")
and 7175f02c

 ("uapi: fix linux/nfc.h userspace compilation errors"),
there is no need to keep the compile-test exception for it in
usr/include/Makefile.

Signed-off-by: Dmitry V. Levin <ldv@altlinux.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>

Merge yet more updates from Andrew Morton:
 "This is the post-linux-next queue. Material which was based on or
  dependent upon material which was in -next.

  69 patches.

  Subsystems affected by this patch series: mm (migration and zsmalloc),
  sysctl, proc, and lib"

* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (69 commits)
  mm: hide the FRONTSWAP Kconfig symbol
  frontswap: remove support for multiple ops
  mm: mark swap_lock and swap_active_head static
  frontswap: simplify frontswap_register_ops
  frontswap: remove frontswap_test
  mm: simplify try_to_unuse
  frontswap: remove the frontswap exports
  frontswap: simplify frontswap_init
  frontswap: remove frontswap_curr_pages
  frontswap: remove frontswap_shrink
  frontswap: remove frontswap_tmem_exclusive_gets
  frontswap: remove frontswap_writethrough
  mm: remove cleancache
  lib/stackdepot: always do filter_irq_stacks() in stack_depot_save()
  lib/stackdepot: allow optional init and stack_table allocation by kvmalloc()
  proc: remove PDE_DATA() completely
  fs: proc: store PDE()->data into inode->i_private
  zsmalloc: replace get_cpu_var with local_lock
  zsmalloc: replace per zpage lock with pool->migrate_lock
  locking/rwlocks: introduce write_lock_nested
  ...

Pull cifs fixes from Steve French:

 - multichannel fixes, addressing additional reconnect and DFS scenarios

 - reenabling fscache support (indexing rewrite, metadata caching e.g.)

 - send additional version information during NTLMSSP negotiate to
   improve debugging

 - fix for a mount race

 - DFS fixes

 - fix for a memory leak for stable

* tag '5.17-rc-part2-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6:
  cifs: update internal module number
  smb3: send NTLMSSP version information
  cifs: Support fscache indexing rewrite
  cifs: cifs_ses_mark_for_reconnect should also update reconnect bits
  cifs: update tcpStatus during negotiate and sess setup
  cifs: make status checks in version independent callers
  cifs: remove repeated state change in dfs tree connect
  cifs: fix the cifs_reconnect path for DFS
  cifs: remove unused variable ses_selected
  cifs: protect all accesses to chan_* with chan_lock
  cifs: fix the connection state transitions with multichannel
  cifs: check reconnects for channels of active tcons too
  smb3: add new defines from protocol specification
  cifs: serialize all mount attempts
  cifs: quirk for STATUS_OBJECT_NAME_INVALID returned for non-ASCII dfs refs
  cifs: alloc_path_with_tree_prefix: do not append sep. if the path is empty
  cifs: clean up an inconsistent indenting
  cifs: free ntlmsspblob allocated in negotiate

Pull xfs fixes from Darrick Wong:
 "One of the patches removes some dead code from xfs_ioctl32.h and the
  other fixes broken workqueue flushing in the inode garbage collector.

   - Minor cleanup of ioctl32 cruft

   - Clean up open coded inodegc workqueue function calls"

* tag 'xfs-5.17-merge-7' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
  xfs: flush inodegc workqueue tasks before cancel
  xfs: remove unused xfs_ioctl32.h declarations

Merge tag 'fscache-fixes-20220121' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs

Pull more fscache updates from David Howells:
 "A set of fixes and minor updates for the fscache rewrite:

   - Fix mishandling of volume collisions (the wait condition is
     inverted and so it was only waiting if the volume collision was
     already resolved).

   - Fix miscalculation of whether there's space available in
     cachefiles.

   - Make sure a default cache name is set on a cache if the user hasn't
     set one by the time they bind the cache.

   - Adjust the way the backing inode is presented in tracepoints, add a
     tracepoint for mkdir and trace directory lookup.

   - Add a tracepoint for failure to set the active file mark.

   - Add an explanation of the checks made on the backing filesystem.

   - Check that the backing filesystem supports tmpfile.

   - Document how the page-release cancellation of the read-skip
     optimisation works.

  And I've included a change for netfslib:

   - Make ops->init_rreq() optional"

* tag 'fscache-fixes-20220121' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs:
  netfs: Make ops->init_rreq() optional
  fscache: Add a comment explaining how page-release optimisation works
  cachefiles: Check that the backing filesystem supports tmpfiles
  cachefiles: Explain checks in a comment
  cachefiles: Trace active-mark failure
  cachefiles: Make some tracepoint adjustments
  cachefiles: set default tag name if it's unspecified
  cachefiles: Calculate the blockshift in terms of bytes, not pages
  fscache: Fix the volume collision wait condition

Pull more folio updates from Matthew Wilcox:
 "Three small folio patches.

  One bug fix, one patch pulled forward from the patches destined for
  5.18 and then a patch to make use of that functionality"

* tag 'folio-5.17a' of git://git.infradead.org/users/willy/pagecache:
  filemap: Use folio_put_refs() in filemap_free_folio()
  mm: Add folio_put_refs()
  pagevec: Initialise folio_batch->percpu_pvec_drained

Pull more SCSI updates from James Bottomley:
 "This series is all the stragglers that didn't quite make the first
  merge window pull. It's mostly minor updates and bug fixes of merge
  window code"

* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  scsi: nsp_cs: Check of ioremap return value
  scsi: ufs: ufs-mediatek: Fix error checking in ufs_mtk_init_va09_pwr_ctrl()
  scsi: ufs: Modify Tactive time setting conditions
  scsi: efct: Remove useless DMA-32 fallback configuration
  scsi: message: fusion: mptctl: Use dma_alloc_coherent()
  scsi: message: fusion: mptsas: Use dma_alloc_coherent()
  scsi: message: fusion: Use dma_alloc_coherent() in mptsas_exp_repmanufacture_info()
  scsi: message: fusion: mptbase: Use dma_alloc_coherent()
  scsi: message: fusion: Use dma_alloc_coherent() in mpt_alloc_fw_memory()
  scsi: message: fusion: Remove usage of the deprecated "pci-dma-compat.h" API
  scsi: megaraid: Avoid mismatched storage type sizes
  scsi: hisi_sas: Remove unused variable and check in hisi_sas_send_ata_reset_each_phy()
  scsi: aic79xx: Remove redundant error variable
  scsi: pm80xx: Port reset timeout error handling correction
  scsi: mpi3mr: Fix formatting problems in some kernel-doc comments
  scsi: mpi3mr: Fix some spelling mistakes
  scsi: mpt3sas: Update persistent trigger pages from sysfs interface
  scsi: core: Fix scsi_mode_select() interface
  scsi: aacraid: Fix spelling of "its"
  scsi: qedf: Fix potential dereference of NULL pointer

Pull ATA fix from Damien Le Moal:
 "A single patch to fix a compilation error in the pata_octeon_cf driver
  (mips architecture), from me"

* tag 'ata-5.17-rc1-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata:
  ata: pata_octeon_cf: fix call to trace_ata_bmdma_stop()

Pull more thermal control updates from Rafael Wysocki:
 "Add device IDs for Raptor Lake to the int340x thermal control driver
  (Srinivas Pandruvada)"

* tag 'thermal-5.17-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  thermal: int340x: Add Raptor Lake PCI device id
  thermal: int340x: Support Raptor Lake

Pull extra ACPI updates from Rafael Wysocki:
 "These fix and clean up the ACPI CPPC driver on top of the recent
  changes in it merged previously and add some new device IDs to the
  ACPI DPTF driver.

  Specifics:

   - Fix a recently introduced endianness-related issue in the ACPI CPPC
     library and clean it up on top of that (Rafael Wysocki)

   - Add new device IDs for the Raptor Lake SoC to the ACPI DPTF driver
     (Srinivas Pandruvada)"

* tag 'acpi-5.17-rc1-3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  ACPI: DPTF: Support Raptor Lake
  ACPI: CPPC: Drop redundant local variable from cpc_read()
  ACPI: CPPC: Fix up I/O port access in cpc_read()