- Jan 27, 2021
-
-
John Garry authored
Now that v2 and v3 hw expose their HW queues (and so shost.nr_hw_queues is set), remove the conditional checks in hisi_sas_task_prep(). This change would affect v1 HW performance (as it does not expose HW queues), but nobody uses it and support may be dropped soon. Link: https://lore.kernel.org/r/1611659068-131975-3-git-send-email-john.garry@huawei.com Reviewed-by:
Xiang Chen <chenxiang66@hisilicon.com> Signed-off-by:
John Garry <john.garry@huawei.com> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com>
-
John Garry authored
The platform_get_irq() check for -EPROBE_DEFER was to ensure that all the steps to add the SCSI host are not done and then only to realise that the probe needs to be deferred. However, since there is now an earlier check for this in hisi_sas_interrupt_preinit(), this check is superfluous and may be removed. Link: https://lore.kernel.org/r/1611659068-131975-2-git-send-email-john.garry@huawei.com Signed-off-by:
-
Tong Zhang authored
lpfc depends on irq_poll library, but it is not selected automatically. When irq_poll is not selected, compiling it can run into following error ERROR: modpost: "irq_poll_init" [drivers/scsi/lpfc/lpfc.ko] undefined! ERROR: modpost: "irq_poll_sched" [drivers/scsi/lpfc/lpfc.ko] undefined! ERROR: modpost: "irq_poll_complete" [drivers/scsi/lpfc/lpfc.ko] undefined! Link: https://lore.kernel.org/r/20210126000554.309858-1-ztong0001@gmail.com Reviewed-by:
James Smart <jsmart2021@gmail.com> Signed-off-by:
Tong Zhang <ztong0001@gmail.com> Signed-off-by:
-
Hannes Reinecke authored
The patch to switch using SAM status values had some typos; fix them up. Link: https://lore.kernel.org/r/20210125085415.70574-1-hare@suse.de Fixes: 491152c7 ("scsi: ncr53c8xx: Use SAM status values") Reported-by:
kernel test robot <lkp@intel.com> Signed-off-by:
Hannes Reinecke <hare@suse.de> Signed-off-by:
-
Dan Carpenter authored
The "pmb" pointer is freed at the start of the function and then freed again in the error handling code. Link: https://lore.kernel.org/r/YA6E8rO51hE56SVw@mwanda Fixes: 92d7f7b0 ("[SCSI] lpfc: NPIV: add NPIV support on top of SLI-3") Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
-
Dan Carpenter authored
This was supposed to be "data" instead of "&data". The current code will corrupt the stack. Link: https://lore.kernel.org/r/YA6E0geUlL9Hs04A@mwanda Fixes: dbf1f53c ("scsi: qla2xxx: Implementation to get and manage host, target stats and initiator port") Acked-by:
Saurav Kashyap <skashyap@marvell.com> Signed-off-by:
-
Martin K. Petersen authored
The UFS core has received a substantial rework this cycle. This in turn has caused a merge conflict in linux-next. Merge 5.11/scsi-fixes into 5.12/scsi-queue and resolve the conflict. Signed-off-by:
-
- Jan 23, 2021
-
-
Yang Li authored
Fix below warnings reported by coccicheck: ./drivers/scsi/qla2xxx/qla_init.c:3371:2-7: WARNING: NULL check before some freeing functions is not needed. ./drivers/scsi/qla2xxx/qla_init.c:7855:5-10: WARNING: NULL check before some freeing functions is not needed. ./drivers/scsi/qla2xxx/qla_init.c:7916:2-7: WARNING: NULL check before some freeing functions is not needed. ./drivers/scsi/qla2xxx/qla_init.c:8113:4-18: WARNING: NULL check before some freeing functions is not needed. ./drivers/scsi/qla2xxx/qla_init.c:8174:2-7: WARNING: NULL check before some freeing functions is not needed. Link: https://lore.kernel.org/r/1611306174-92627-1-git-send-email-abaci-bugfix@linux.alibaba.com Reported-by:
Abaci Robot <abaci@linux.alibaba.com> Reviewed-by:
Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by:
Yang Li <abaci-bugfix@linux.alibaba.com> Signed-off-by:
-
kernel test robot authored
NULL check before vfree is not needed. Generated by: scripts/coccinelle/free/ifnullfree.cocci Link: https://lore.kernel.org/r/alpine.DEB.2.22.394.2012111113060.2669@hadrien Reported-by:
Julia Lawall <julia.lawall@inria.fr> Signed-off-by:
-
René Rebe authored
Since Linus Torvalds reinstated KERN_CONT in commit 4bcc595c ("printk: reinstate KERN_CONT for printing continuation lines") in 2015, the qla1280 SCSI driver printed a rather ugly and screen real estate wasting multi-line per device status glibberish during boot. Fix this by adding KERN_CONT as needed. Tested on my Sgi Octane: https://youtu.be/Lfqe1SYR2jk Link: https://lore.kernel.org/r/20201210.223944.388095546873159172.rene@exactcode.com Signed-off-by:
René Rebe <rene@exactcode.de> Signed-off-by:
-
Bean Huo authored
Delete ufshcd_wb_buf_flush_enable() and ufshcd_wb_buf_flush_disable(). Move the implementation into ufshcd_wb_toggle_flush(). Link: https://lore.kernel.org/r/20210121185736.12471-1-huobean@gmail.com Reviewed-by:
Stanley Chu <stanley.chu@mediatek.com> Reviewed-by:
Can Guo <cang@codeaurora.org> Signed-off-by:
Bean Huo <beanhuo@micron.com> Signed-off-by:
-
Dan Carpenter authored
The list iterator can't be NULL so this check is not required. Removing the check silences a Smatch warning about inconsistent NULL checking. drivers/scsi/qla2xxx/qla_dfs.c:371 qla_dfs_tgt_counters_show() error: we previously assumed 'fcport' could be null (see line 372) Link: https://lore.kernel.org/r/YAkaaSrhn1mFqyHy@mwanda Acked-by: -
Jiapeng Zhong authored
Fix the following coccicheck warnings: ./drivers/scsi/qla2xxx/qla_isr.c:780:2-18: WARNING: Assignment of 0/1 to bool variable. Link: https://lore.kernel.org/r/1611127919-56551-1-git-send-email-abaci-bugfix@linux.alibaba.com Reported-by:
-
Eric Curtin authored
Comment did not match function signature. Link: https://lore.kernel.org/r/20210119205022.40000-1-ericcurtin17@gmail.com Signed-off-by:
Eric Curtin <ericcurtin17@gmail.com> Signed-off-by:
-
YANG LI authored
Fix the following coccicheck warning: ./drivers/scsi/mpt3sas/mpt3sas_base.c:2424:5-20: WARNING: Comparison of 0/1 to bool variable Link: https://lore.kernel.org/r/1610355253-25960-1-git-send-email-abaci-bugfix@linux.alibaba.com Reported-by:
-
Ahmed S. Darwish authored
These variants were added for bisectability. Remove them, as all call sites have now been convertd to use the original API. Link: https://lore.kernel.org/r/20210118100955.1761652-20-a.darwish@linutronix.de Cc: Jason Yan <yanaijie@huawei.com> Reviewed-by:
Ahmed S. Darwish <a.darwish@linutronix.de> Signed-off-by:
-
Ahmed S. Darwish authored
libsas event notifiers required an extension where gfp_t flags must be explicitly passed. For bisectability, a temporary _gfp() variant of such functions were added. All call sites then got converted use the _gfp() variants and explicitly pass GFP context. Having no callers left, the original libsas notifiers were then modified to accept gfp_t flags by default. Switch back to the original libas API, while still passing GFP context. The libsas _gfp() variants will be removed afterwards. Link: https://lore.kernel.org/r/20210118100955.1761652-19-a.darwish@linutronix.de Reviewed-by:
-
Ahmed S. Darwish authored
libsas event notifiers required an extension where gfp_t flags must be explicitly passed. For bisectability, a temporary _gfp() variant of such functions were added. All call sites then got converted use the _gfp() variants and explicitly pass GFP context. Having no callers left, the original libsas notifiers were then modified to accept gfp_t flags by default. Switch back to the original libas API, while still passing GFP context. The libsas _gfp() variants will be removed afterwards. Link: https://lore.kernel.org/r/20210118100955.1761652-18-a.darwish@linutronix.de Cc: Artur Paszkiewicz <artur.paszkiewicz@intel.com> Reviewed-by:
-
Ahmed S. Darwish authored
libsas event notifiers required an extension where gfp_t flags must be explicitly passed. For bisectability, a temporary _gfp() variant of such functions were added. All call sites then got converted use the _gfp() variants and explicitly pass GFP context. Having no callers left, the original libsas notifiers were then modified to accept gfp_t flags by default. Switch back to the original event notifiers API, while still passing GFP context. The _gfp() notifier variants will be removed afterwards. Link: https://lore.kernel.org/r/20210118100955.1761652-17-a.darwish@linutronix.de Cc: Jason Yan <yanaijie@huawei.com> Reviewed-by:
-
Ahmed S. Darwish authored
libsas event notifiers required an extension where gfp_t flags must be explicitly passed. For bisectability, a temporary _gfp() variant of such functions were added. All call sites then got converted use the _gfp() variants and explicitly pass GFP context. Having no callers left, the original libsas notifiers were then modified to accept gfp_t flags by default. Switch back to the original libas API, while still passing GFP context. The libsas _gfp() variants will be removed afterwards. Link: https://lore.kernel.org/r/20210118100955.1761652-16-a.darwish@linutronix.de Cc: Jack Wang <jinpu.wang@cloud.ionos.com> Reviewed-by:
Jack Wang <jinpu.wang@cloud.ionos.com> Signed-off-by:
-
Ahmed S. Darwish authored
libsas event notifiers required an extension where gfp_t flags must be explicitly passed. For bisectability, a temporary _gfp() variant of such functions were added. All call sites then got converted use the _gfp() variants and explicitly pass GFP context. Having no callers left, the original libsas notifiers were then modified to accept gfp_t flags by default. Switch back to the original libas API, while still passing GFP context. The libsas _gfp() variants will be removed afterwards. Link: https://lore.kernel.org/r/20210118100955.1761652-15-a.darwish@linutronix.de Reviewed-by:
-
Ahmed S. Darwish authored
libsas event notifiers required an extension where gfp_t flags must be explicitly passed. For bisectability, a temporary _gfp() variant of such functions were added. All call sites then got converted use the _gfp() variants and explicitly pass GFP context. Having no callers left, the original libsas notifiers were then modified to accept gfp_t flags by default. Switch back to the original libas API, while still passing GFP context. The libsas _gfp() variants will be removed afterwards. Link: https://lore.kernel.org/r/20210118100955.1761652-14-a.darwish@linutronix.de Reviewed-by:
-
Ahmed S. Darwish authored
All call-sites of below libsas APIs: - sas_alloc_event() - sas_notify_port_event() - sas_notify_phy_event() have been converted to use the _gfp()-suffixed version. Modify the original APIs above to take a gfp_t flags parameter by default. For bisectability, call-sites will be modified again to use the original libsas APIs (while passing gfp_t). The temporary _gfp()-suffixed versions can then be removed. Link: https://lore.kernel.org/r/20210118100955.1761652-13-a.darwish@linutronix.de Cc: Jason Yan <yanaijie@huawei.com> Reviewed-by:
-
Ahmed S. Darwish authored
Use the new libsas event notifiers API, which requires callers to explicitly pass the gfp_t memory allocation flags. Below are the context analysis for modified functions: => hisi_sas_bytes_dmaed(): Since it is invoked from both process and atomic contexts, let its callers pass the gfp_t flags: * hisi_sas_main.c: ------------------ hisi_sas_phyup_work(): workqueue context -> hisi_sas_bytes_dmaed(..., GFP_KERNEL) hisi_sas_controller_reset_done(): has an msleep() -> hisi_sas_rescan_topology() -> hisi_sas_phy_down() -> hisi_sas_bytes_dmaed(..., GFP_KERNEL) hisi_sas_debug_I_T_nexus_reset(): calls wait_for_completion_timeout() -> hisi_sas_phy_down() -> hisi_sas_bytes_dmaed(..., GFP_KERNEL) * hisi_sas_v1_hw.c: ------------------- int_abnormal_v1_hw(): irq handler -> hisi_sas_phy_down() -> hisi_sas_bytes_dmaed(..., GFP_ATOMIC) * hisi_sas_v[23]_hw.c: ---------------------- int_phy_updown_v[23]_hw(): irq handler -> phy_down_v[23]_hw() -> hisi_sas_phy_down() -> hisi_sas_bytes_dmaed(..., GFP_ATOMIC) => int_bcast_v1_hw() and phy_bcast_v3_hw(): Both are invoked exclusively from irq handlers. Pass GFP_ATOMIC. Link: https://lore.kernel.org/r/20210118100955.1761652-12-a.darwish@linutronix.de Reviewed-by: -
Ahmed S. Darwish authored
Use the new libsas event notifiers API, which requires callers to explicitly pass the gfp_t memory allocation flags. Context analysis: aic94xx_hwi.c: asd_dl_tasklet_handler() -> asd_ascb::tasklet_complete() == escb_tasklet_complete() -> aic94xx_scb.c: asd_phy_event_tasklet() -> aic94xx_scb.c: asd_bytes_dmaed_tasklet() -> aic94xx_scb.c: asd_link_reset_err_tasklet() -> aic94xx_scb.c: asd_primitive_rcvd_tasklet() All functions are invoked by escb_tasklet_complete(), which is invoked by the tasklet handler. Pass GFP_ATOMIC. Link: https://lore.kernel.org/r/20210118100955.1761652-11-a.darwish@linutronix.de Reviewed-by: -
Ahmed S. Darwish authored
Use the new libsas event notifiers API, which requires callers to explicitly pass the gfp_t memory allocation flags. Call chain analysis, pm8001_hwi.c: pm8001_interrupt_handler_msix() || pm8001_interrupt_handler_intx() || pm8001_tasklet() -> PM8001_CHIP_DISP->isr() = pm80xx_chip_isr() -> process_oq [spin_lock_irqsave(&pm8001_ha->lock, ...)] -> process_one_iomb() -> mpi_hw_event() -> hw_event_sas_phy_up() -> pm8001_bytes_dmaed() -> hw_event_sata_phy_up -> pm8001_bytes_dmaed() All functions are invoked by process_one_iomb(), which is invoked by the interrupt service routine and the tasklet handler. A similar call chain is also found at pm80xx_hwi.c. Pass GFP_ATOMIC. For pm8001_sas.c, pm8001_phy_control() runs in task context as it calls wait_for_completion() and msleep(). Pass GFP_KERNEL. Link: https://lore.kernel.org/r/20210118100955.1761652-10-a.darwish@linutronix.de Cc: Jack Wang <jinpu.wang@cloud.ionos.com> Reviewed-by: -
Ahmed S. Darwish authored
Use the new libsas event notifiers API, which requires callers to explicitly pass the gfp_t memory allocation flags. Context analysis: - sas_enable_revalidation(): process, acquires mutex - sas_resume_ha(): process, calls wait_event_timeout() Link: https://lore.kernel.org/r/20210118100955.1761652-9-a.darwish@linutronix.de Cc: Jason Yan <yanaijie@huawei.com> Reviewed-by:
-
Ahmed S. Darwish authored
Use the new libsas event notifiers API, which requires callers to explicitly pass the gfp_t memory allocation flags. libsas sas_notify_port_event() is called from isci_port_bc_change_received(). Below is the context analysis for all of its call chains: host.c: sci_controller_error_handler(): atomic, irq handler (*) OR host.c: sci_controller_completion_handler(), atomic, tasklet (*) -> sci_controller_process_completions() -> sci_controller_event_completion() -> phy.c: sci_phy_event_handler() -> port.c: sci_port_broadcast_change_received() -> isci_port_bc_change_received() host.c: isci_host_init() (@) spin_lock_irq(isci_host::scic_lock) -> sci_controller_initialize(), atomic (*) -> port_config.c: sci_port_configuration_agent_initialize() -> sci_mpc_agent_validate_phy_configuration() -> port.c: sci_port_add_phy() -> sci_port_set_phy() -> phy.c: sci_phy_set_port() -> port.c: sci_port_broadcast_change_received() -> isci_port_bc_change_received() port_config.c: apc_agent_timeout(), atomic, timer callback (*) -> sci_apc_agent_configure_ports() -> port.c: sci_port_add_phy() -> sci_port_set_phy() -> phy.c: sci_phy_set_port() -> port.c: sci_port_broadcast_change_received() -> isci_port_bc_change_received() phy.c: enter SCI state: *SCI_PHY_STOPPED* # Cont. from [1] -> sci_phy_stopped_state_enter() -> host.c: sci_controller_link_down() -> ->link_down_handler() == port_config.c: sci_apc_agent_link_down() -> port.c: sci_port_remove_phy() -> sci_port_clear_phy() -> phy.c: sci_phy_set_port() -> port.c: sci_port_broadcast_change_received() -> isci_port_bc_change_received() phy.c: enter SCI state: *SCI_PHY_STARTING* # Cont. from [2] -> sci_phy_starting_state_enter() -> host.c: sci_controller_link_down() -> ->link_down_handler() == port_config.c: sci_apc_agent_link_down() -> port.c: sci_port_remove_phy() -> sci_port_clear_phy() -> phy.c: sci_phy_set_port() -> port.c: sci_port_broadcast_change_received() -> isci_port_bc_change_received() [1] Call chains for entering state: *SCI_PHY_STOPPED* ----------------------------------------------------- host.c: isci_host_init() (@) spin_lock_irq(isci_host::scic_lock) -> sci_controller_initialize(), atomic (*) -> phy.c: sci_phy_initialize() -> phy.c: sci_phy_link_layer_initialization() -> phy.c: sci_change_state(SCI_PHY_STOPPED) init.c: PCI ->remove() || PM_OPS ->suspend, process context (+) -> host.c: isci_host_deinit() -> sci_controller_stop_phys() -> phy.c: sci_phy_stop() -> sci_change_state(SCI_PHY_STOPPED) phy.c: isci_phy_control() spin_lock_irqsave(isci_host::scic_lock, ) -> sci_phy_stop(), atomic (*) -> sci_change_state(SCI_PHY_STOPPED) [2] Call chains for entering state: *SCI_PHY_STARTING* ------------------------------------------------------ phy.c: phy_sata_timeout(), atimer, timer callback (*) spin_lock_irqsave(isci_host::scic_lock, ) -> sci_change_state(SCI_PHY_STARTING) host.c: phy_startup_timeout(), atomic, timer callback (*) spin_lock_irqsave(isci_host::scic_lock, ) -> sci_controller_start_next_phy() -> sci_phy_start() -> sci_change_state(SCI_PHY_STARTING) host.c: isci_host_start() (@) spin_lock_irq(isci_host::scic_lock) -> sci_controller_start(), atomic (*) -> sci_controller_start_next_phy() -> sci_phy_start() -> sci_change_state(SCI_PHY_STARTING) phy.c: Enter SCI state *SCI_PHY_SUB_FINAL* # Cont. from [2A] -> sci_change_state(SCI_PHY_SUB_FINAL) -> sci_phy_starting_final_substate_enter() -> sci_change_state(SCI_PHY_READY) -> Enter SCI state: *SCI_PHY_READY* -> sci_phy_ready_state_enter() -> host.c: sci_controller_link_up() -> sci_controller_start_next_phy() -> sci_phy_start() -> sci_change_state(SCI_PHY_STARTING) phy.c: sci_phy_event_handler(), atomic, discussed earlier (*) -> sci_change_state(SCI_PHY_STARTING), 11 instances port.c: isci_port_perform_hard_reset() spin_lock_irqsave(isci_host::scic_lock, ) -> port.c: sci_port_hard_reset(), atomic (*) -> phy.c: sci_phy_reset() -> sci_change_state(SCI_PHY_RESETTING) -> enter SCI PHY state: *SCI_PHY_RESETTING* -> sci_phy_resetting_state_enter() -> sci_change_state(SCI_PHY_STARTING) [2A] Call chains for entering SCI state: *SCI_PHY_SUB_FINAL* ------------------------------------------------------------ host.c: power_control_timeout(), atomic, timer callback (*) spin_lock_irqsave(isci_host::scic_lock, ) -> phy.c: sci_phy_consume_power_handler() -> phy.c: sci_change_state(SCI_PHY_SUB_FINAL) host.c: sci_controller_error_handler(): atomic, irq handler (*) OR host.c: sci_controller_completion_handler(), atomic, tasklet (*) -> sci_controller_process_completions() -> sci_controller_unsolicited_frame() -> phy.c: sci_phy_frame_handler() -> sci_change_state(SCI_PHY_SUB_AWAIT_SAS_POWER) -> sci_phy_starting_await_sas_power_substate_enter() -> host.c: sci_controller_power_control_queue_insert() -> phy.c: sci_phy_consume_power_handler() -> sci_change_state(SCI_PHY_SUB_FINAL) -> sci_change_state(SCI_PHY_SUB_FINAL) -> sci_controller_event_completion() -> phy.c: sci_phy_event_handler() -> sci_phy_start_sata_link_training() -> sci_change_state(SCI_PHY_SUB_AWAIT_SATA_POWER) -> sci_phy_starting_await_sata_power_substate_enter -> host.c: sci_controller_power_control_queue_insert() -> phy.c: sci_phy_consume_power_handler() -> sci_change_state(SCI_PHY_SUB_FINAL) As can be seen from the "(*)" markers above, almost all the call-chains are atomic. The only exception, marked with "(+)", is a PCI ->remove() and PM_OPS ->suspend() cold path. Thus, pass GFP_ATOMIC to the libsas port event notifier. Note, the now-replaced libsas APIs used in_interrupt() to implicitly decide which memory allocation type to use. This was only partially correct, as it fails to choose the correct GFP flags when just preemption or interrupts are disabled. Such buggy code paths are marked with "(@)" in the call chains above. Link: https://lore.kernel.org/r/20210118100955.1761652-8-a.darwish@linutronix.de Fixes: 1c393b97 ("scsi: libsas: Use dynamic alloced work to avoid sas event lost") Cc: Artur Paszkiewicz <artur.paszkiewicz@intel.com> Reviewed-by: -
Ahmed S. Darwish authored
Use the new libsas event notifiers API, which requires callers to explicitly pass the gfp_t memory allocation flags. libsas sas_notify_port_event() is called from isci_port_link_up(). Below is the context analysis for all of its call chains: host.c: isci_host_init() (@) spin_lock_irq(isci_host::scic_lock) -> sci_controller_initialize(), atomic (*) -> port_config.c: sci_port_configuration_agent_initialize() -> sci_mpc_agent_validate_phy_configuration() -> port.c: sci_port_add_phy() -> sci_port_general_link_up_handler() -> sci_port_activate_phy() -> isci_port_link_up() port_config.c: apc_agent_timeout(), atomic, timer callback (*) -> sci_apc_agent_configure_ports() -> port.c: sci_port_add_phy() -> sci_port_general_link_up_handler() -> sci_port_activate_phy() -> isci_port_link_up() phy.c: enter SCI state: *SCI_PHY_SUB_FINAL* # Cont. from [1] -> phy.c: sci_phy_starting_final_substate_enter() -> phy.c: sci_change_state(SCI_PHY_READY) -> enter SCI state: *SCI_PHY_READY* -> phy.c: sci_phy_ready_state_enter() -> host.c: sci_controller_link_up() -> .link_up_handler() == port_config.c: sci_apc_agent_link_up() -> port.c: sci_port_link_up() -> (continue at [A]) == port_config.c: sci_mpc_agent_link_up() -> port.c: sci_port_link_up() -> (continue at [A]) port_config.c: mpc_agent_timeout(), atomic, timer callback (*) spin_lock_irqsave(isci_host::scic_lock, ) -> ->link_up_handler() == port_config.c: sci_apc_agent_link_up() -> port.c: sci_port_link_up() -> (continue at [A]) == port_config.c: sci_mpc_agent_link_up() -> port.c: sci_port_link_up() -> (continue at [A]) [A] port.c: sci_port_link_up() -> sci_port_activate_phy() -> isci_port_link_up() -> sci_port_general_link_up_handler() -> sci_port_activate_phy() -> isci_port_link_up() [1] Call chains for entering SCI state: *SCI_PHY_SUB_FINAL* ----------------------------------------------------------- host.c: power_control_timeout(), atomic, timer callback (*) spin_lock_irqsave(isci_host::scic_lock, ) -> phy.c: sci_phy_consume_power_handler() -> phy.c: sci_change_state(SCI_PHY_SUB_FINAL) host.c: sci_controller_error_handler(): atomic, irq handler (*) OR host.c: sci_controller_completion_handler(), atomic, tasklet (*) -> sci_controller_process_completions() -> sci_controller_unsolicited_frame() -> phy.c: sci_phy_frame_handler() -> sci_change_state(SCI_PHY_SUB_AWAIT_SAS_POWER) -> sci_phy_starting_await_sas_power_substate_enter() -> host.c: sci_controller_power_control_queue_insert() -> phy.c: sci_phy_consume_power_handler() -> sci_change_state(SCI_PHY_SUB_FINAL) -> sci_change_state(SCI_PHY_SUB_FINAL) -> sci_controller_event_completion() -> phy.c: sci_phy_event_handler() -> sci_phy_start_sata_link_training() -> sci_change_state(SCI_PHY_SUB_AWAIT_SATA_POWER) -> sci_phy_starting_await_sata_power_substate_enter -> host.c: sci_controller_power_control_queue_insert() -> phy.c: sci_phy_consume_power_handler() -> sci_change_state(SCI_PHY_SUB_FINAL) As can be seen from the "(*)" markers above, all the call-chains are atomic. Pass GFP_ATOMIC to libsas port event notifier. Note, the now-replaced libsas APIs used in_interrupt() to implicitly decide which memory allocation type to use. This was only partially correct, as it fails to choose the correct GFP flags when just preemption or interrupts are disabled. Such buggy code paths are marked with "(@)" in the call chains above. Link: https://lore.kernel.org/r/20210118100955.1761652-7-a.darwish@linutronix.de Fixes: 1c393b97 ("scsi: libsas: Use dynamic alloced work to avoid sas event lost") Cc: Artur Paszkiewicz <artur.paszkiewicz@intel.com> Reviewed-by: -
Ahmed S. Darwish authored
Use the new libsas event notifiers API, which requires callers to explicitly pass the gfp_t memory allocation flags. sas_notify_phy_event() is exclusively called by isci_port_link_down(). Below is the context analysis for all of its call chains: port.c: port_timeout(), atomic, timer callback (*) spin_lock_irqsave(isci_host::scic_lock, ) -> port_state_machine_change(..., SCI_PORT_FAILED) -> enter SCI port state: *SCI_PORT_FAILED* -> sci_port_failed_state_enter() -> isci_port_hard_reset_complete() -> isci_port_link_down() port.c: isci_port_perform_hard_reset() spin_lock_irqsave(isci_host::scic_lock, ) -> port.c: sci_port_hard_reset(), atomic (*) -> phy.c: sci_phy_reset() -> sci_change_state(SCI_PHY_RESETTING) -> enter SCI PHY state: *SCI_PHY_RESETTING* -> sci_phy_resetting_state_enter() -> port.c: sci_port_deactivate_phy() -> isci_port_link_down() port.c: enter SCI port state: *SCI_PORT_READY* # Cont. from [1] -> sci_port_ready_state_enter() -> isci_port_hard_reset_complete() -> isci_port_link_down() phy.c: enter SCI state: *SCI_PHY_STOPPED* # Cont. from [2] -> sci_phy_stopped_state_enter() -> host.c: sci_controller_link_down() -> ->link_down_handler() == port_config.c: sci_apc_agent_link_down() -> port.c: sci_port_remove_phy() -> sci_port_deactivate_phy() -> isci_port_link_down() == port_config.c: sci_mpc_agent_link_down() -> port.c: sci_port_link_down() -> sci_port_deactivate_phy() -> isci_port_link_down() phy.c: enter SCI state: *SCI_PHY_STARTING* # Cont. from [3] -> sci_phy_starting_state_enter() -> host.c: sci_controller_link_down() -> ->link_down_handler() == port_config.c: sci_apc_agent_link_down() -> port.c: sci_port_remove_phy() -> isci_port_link_down() == port_config.c: sci_mpc_agent_link_down() -> port.c: sci_port_link_down() -> sci_port_deactivate_phy() -> isci_port_link_down() [1] Call chains for 'enter SCI port state: *SCI_PORT_READY*' ------------------------------------------------------------ host.c: isci_host_init() (@) spin_lock_irq(isci_host::scic_lock) -> sci_controller_initialize(), atomic (*) -> port_config.c: sci_port_configuration_agent_initialize() -> sci_mpc_agent_validate_phy_configuration() -> port.c: sci_port_add_phy() -> sci_port_general_link_up_handler() -> port_state_machine_change(, SCI_PORT_READY) -> enter port state *SCI_PORT_READY* host.c: isci_host_start() (@) spin_lock_irq(isci_host::scic_lock) -> host.c: sci_controller_start(), atomic (*) -> host.c: sci_port_start() -> port.c: port_state_machine_change(, SCI_PORT_READY) -> enter port state *SCI_PORT_READY* port_config.c: apc_agent_timeout(), atomic, timer callback (*) -> sci_apc_agent_configure_ports() -> port.c: sci_port_add_phy() -> sci_port_general_link_up_handler() -> port_state_machine_change(, SCI_PORT_READY) -> enter port state *SCI_PORT_READY* port_config.c: mpc_agent_timeout(), atomic, timer callback (*) spin_lock_irqsave(isci_host::scic_lock, ) -> ->link_up_handler() == port.c: sci_apc_agent_link_up() -> sci_port_general_link_up_handler() -> port_state_machine_change(, SCI_PORT_READY) -> enter port state *SCI_PORT_READY* == port.c: sci_mpc_agent_link_up() -> port.c: sci_port_link_up() -> sci_port_general_link_up_handler() -> port_state_machine_change(, SCI_PORT_READY) -> enter port state *SCI_PORT_READY* phy.c: enter SCI state: SCI_PHY_SUB_FINAL # Cont. from [1A] -> sci_phy_starting_final_substate_enter() -> sci_change_state(SCI_PHY_READY) -> enter SCI state: *SCI_PHY_READY* -> sci_phy_ready_state_enter() -> host.c: sci_controller_link_up() -> port_agent.link_up_handler() == port_config.c: sci_apc_agent_link_up() -> port.c: sci_port_link_up() -> sci_port_general_link_up_handler() -> port_state_machine_change(, SCI_PORT_READY) -> enter port state *SCI_PORT_READY* == port_config.c: sci_mpc_agent_link_up() -> port.c: sci_port_link_up() -> sci_port_general_link_up_handler() -> port_state_machine_change(, SCI_PORT_READY) -> enter port state *SCI_PORT_READY* [1A] Call chains for entering SCI state: *SCI_PHY_SUB_FINAL* ------------------------------------------------------------ host.c: power_control_timeout(), atomic, timer callback (*) spin_lock_irqsave(isci_host::scic_lock, ) -> phy.c: sci_phy_consume_power_handler() -> phy.c: sci_change_state(SCI_PHY_SUB_FINAL) host.c: sci_controller_error_handler(): atomic, irq handler (*) OR host.c: sci_controller_completion_handler(), atomic, tasklet (*) -> sci_controller_process_completions() -> sci_controller_unsolicited_frame() -> phy.c: sci_phy_frame_handler() -> sci_change_state(SCI_PHY_SUB_AWAIT_SAS_POWER) -> sci_phy_starting_await_sas_power_substate_enter() -> host.c: sci_controller_power_control_queue_insert() -> phy.c: sci_phy_consume_power_handler() -> sci_change_state(SCI_PHY_SUB_FINAL) -> sci_change_state(SCI_PHY_SUB_FINAL) -> sci_controller_event_completion() -> phy.c: sci_phy_event_handler() -> sci_phy_start_sata_link_training() -> sci_change_state(SCI_PHY_SUB_AWAIT_SATA_POWER) -> sci_phy_starting_await_sata_power_substate_enter -> host.c: sci_controller_power_control_queue_insert() -> phy.c: sci_phy_consume_power_handler() -> sci_change_state(SCI_PHY_SUB_FINAL) [2] Call chains for entering state: *SCI_PHY_STOPPED* ----------------------------------------------------- host.c: isci_host_init() (@) spin_lock_irq(isci_host::scic_lock) -> sci_controller_initialize(), atomic (*) -> phy.c: sci_phy_initialize() -> phy.c: sci_phy_link_layer_initialization() -> phy.c: sci_change_state(SCI_PHY_STOPPED) init.c: PCI ->remove() || PM_OPS ->suspend, process context (+) -> host.c: isci_host_deinit() -> sci_controller_stop_phys() -> phy.c: sci_phy_stop() -> sci_change_state(SCI_PHY_STOPPED) phy.c: isci_phy_control() spin_lock_irqsave(isci_host::scic_lock, ) -> sci_phy_stop(), atomic (*) -> sci_change_state(SCI_PHY_STOPPED) [3] Call chains for entering state: *SCI_PHY_STARTING* ------------------------------------------------------ phy.c: phy_sata_timeout(), atimer, timer callback (*) spin_lock_irqsave(isci_host::scic_lock, ) -> sci_change_state(SCI_PHY_STARTING) host.c: phy_startup_timeout(), atomic, timer callback (*) spin_lock_irqsave(isci_host::scic_lock, ) -> sci_controller_start_next_phy() -> sci_phy_start() -> sci_change_state(SCI_PHY_STARTING) host.c: isci_host_start() (@) spin_lock_irq(isci_host::scic_lock) -> sci_controller_start(), atomic (*) -> sci_controller_start_next_phy() -> sci_phy_start() -> sci_change_state(SCI_PHY_STARTING) phy.c: Enter SCI state *SCI_PHY_SUB_FINAL*, atomic, check above (*) -> sci_change_state(SCI_PHY_SUB_FINAL) -> sci_phy_starting_final_substate_enter() -> sci_change_state(SCI_PHY_READY) -> Enter SCI state: *SCI_PHY_READY* -> sci_phy_ready_state_enter() -> host.c: sci_controller_link_up() -> sci_controller_start_next_phy() -> sci_phy_start() -> sci_change_state(SCI_PHY_STARTING) phy.c: sci_phy_event_handler(), atomic, discussed earlier (*) -> sci_change_state(SCI_PHY_STARTING), 11 instances phy.c: enter SCI state: *SCI_PHY_RESETTING*, atomic, discussed (*) -> sci_phy_resetting_state_enter() -> sci_change_state(SCI_PHY_STARTING) As can be seen from the "(*)" markers above, almost all the call-chains are atomic. The only exception, marked with "(+)", is a PCI ->remove() and PM_OPS ->suspend() cold path. Thus, pass GFP_ATOMIC to the libsas phy event notifier. Note, The now-replaced libsas APIs used in_interrupt() to implicitly decide which memory allocation type to use. This was only partially correct, as it fails to choose the correct GFP flags when just preemption or interrupts are disabled. Such buggy code paths are marked with "(@)" in the call chains above. Link: https://lore.kernel.org/r/20210118100955.1761652-6-a.darwish@linutronix.de Fixes: 1c393b97 ("scsi: libsas: Use dynamic alloced work to avoid sas event lost") Cc: Artur Paszkiewicz <artur.paszkiewicz@intel.com> Reviewed-by: -
Ahmed S. Darwish authored
mvsas calls the non _gfp version of the libsas event notifiers API, leading to the buggy call chains below: mvsas/mv_sas.c: mvs_work_queue() [process context] spin_lock_irqsave(mvs_info::lock, ) -> libsas/sas_event.c: sas_notify_phy_event() -> sas_alloc_event() -> in_interrupt() = false -> invalid GFP_KERNEL allocation -> libsas/sas_event.c: sas_notify_port_event() -> sas_alloc_event() -> in_interrupt() = false -> invalid GFP_KERNEL allocation Use the new event notifiers API instead, which requires callers to explicitly pass the gfp_t memory allocation flags. Below are context analysis for the modified functions: => mvs_bytes_dmaed(): Since it is invoked from both process and atomic contexts, let its callers pass the gfp_t flags. Call chains: scsi_scan.c: do_scsi_scan_host() [has msleep()] -> shost->hostt->scan_start() -> [mvsas/mv_init.c: Scsi_Host::scsi_host_template .scan_start = mvs_scan_start()] -> mvsas/mv_sas.c: mvs_scan_start() -> mvs_bytes_dmaed(..., GFP_KERNEL) mvsas/mv_sas.c: mvs_work_queue() spin_lock_irqsave(mvs_info::lock,) -> mvs_bytes_dmaed(..., GFP_ATOMIC) mvsas/mv_64xx.c: mvs_64xx_isr() || mvsas/mv_94xx.c: mvs_94xx_isr() -> mvsas/mv_chips.h: mvs_int_full() -> mvsas/mv_sas.c: mvs_int_port() -> mvs_bytes_dmaed(..., GFP_ATOMIC); => mvs_work_queue(): Invoked from process context, but it calls all the libsas event notifier APIs under a spin_lock_irqsave(). Pass GFP_ATOMIC. Link: https://lore.kernel.org/r/20210118100955.1761652-5-a.darwish@linutronix.de Fixes: 1c393b97 ("scsi: libsas: Use dynamic alloced work to avoid sas event lost") Cc: Jason Yan <yanaijie@huawei.com> Reviewed-by: -
Ahmed S. Darwish authored
sas_alloc_event() uses in_interrupt() to decide which allocation should be used. The usage of in_interrupt() in drivers is phased out and Linus clearly requested that code which changes behaviour depending on context should either be separated or the context be conveyed in an argument passed by the caller, which usually knows the context. The in_interrupt() check is also only partially correct, because it fails to choose the correct code path when just preemption or interrupts are disabled. For example, as in the following call chain: mvsas/mv_sas.c: mvs_work_queue() [process context] spin_lock_irqsave(mvs_info::lock, ) -> libsas/sas_event.c: sas_notify_phy_event() -> sas_alloc_event() -> in_interrupt() = false -> invalid GFP_KERNEL allocation -> libsas/sas_event.c: sas_notify_port_event() -> sas_alloc_event() -> in_interrupt() = false -> invalid GFP_KERNEL allocation Introduce sas_alloc_event_gfp(), sas_notify_port_event_gfp(), and sas_notify_phy_event_gfp(), which all behave like the non _gfp() variants but use a caller-passed GFP mask for allocations. For bisectability, all callers will be modified first to pass GFP context, then the non _gfp() libsas API variants will be modified to take a gfp_t by default. Link: https://lore.kernel.org/r/20210118100955.1761652-4-a.darwish@linutronix.de Fixes: 1c393b97 ("scsi: libsas: Use dynamic alloced work to avoid sas event lost") Cc: Jason Yan <yanaijie@huawei.com> Reviewed-by: -
John Garry authored
LLDDs report events to libsas with .notify_port_event and .notify_phy_event callbacks. These callbacks are fixed and so there is no reason why the functions cannot be called directly, so do that. This neatens the code slightly, makes it more obvious, and reduces function pointer usage, which is generally a good thing. Downside is that there are 2x more symbol exports. [a.darwish@linutronix.de: Remove the now unused "sas_ha" local variables] Link: https://lore.kernel.org/r/20210118100955.1761652-3-a.darwish@linutronix.de Reviewed-by:
Christoph Hellwig <hch@lst.de> Reviewed-by:
-
Ahmed S. Darwish authored
The ->notify_ha_event() hook has long been removed from the libsas event interface. Remove it from documentation. Link: https://lore.kernel.org/r/20210118100955.1761652-2-a.darwish@linutronix.de Fixes: 042ebd29 ("scsi: libsas: kill useless ha_event and do some cleanup") Cc: stable@vger.kernel.org Reviewed-by:
-
Hannes Reinecke authored
Use SAM status values instead of the driver-defined ones. This also fixes a potential bug as the driver-defined values declare 'COMMAND TERMINATED' with a value of 0x20, whereas SCSI-II defines it with a value of 0x22. Link: https://lore.kernel.org/r/20210113090500.129644-36-hare@suse.de Reviewed-by:
-
Hannes Reinecke authored
Replace the driver-defined status byte accessors with the mid-layer defined ones. Link: https://lore.kernel.org/r/20210113090500.129644-35-hare@suse.de Reviewed-by:
-
Hannes Reinecke authored
fc_remote_port_chkready() returns a SCSI result value, not the port status. Fix the value returned when the remote port isn't set. Link: https://lore.kernel.org/r/20210113090500.129644-34-hare@suse.de Reviewed-by:
-
Hannes Reinecke authored
ILLEGAL_COMMAND is a sense code, not a driver byte. Link: https://lore.kernel.org/r/20210113090500.129644-33-hare@suse.de Reviewed-by:
-
Hannes Reinecke authored
A non-zero queuecommand() return code means 'busy', i.e. the command hasn't been submitted. So any command which should be failed need to be completed via the ->scsi_done() callback with the appropriate result code set. Link: https://lore.kernel.org/r/20210113090500.129644-32-hare@suse.de Reviewed-by:
-
Hannes Reinecke authored
Use standard SCSI status and drop usage of the linux-specific ones. Link: https://lore.kernel.org/r/20210113090500.129644-31-hare@suse.de Reviewed-by:
Bart Van Assche <bvanassche@acm.org> Reviewed-by:
-
