- Jun 06, 2020
-
-
Hannes Reinecke authored
per-device reclaim should select zones on that device only. Signed-off-by:
Hannes Reinecke <hare@suse.de> Reviewed-by:
Damien Le Moal <damien.lemoal@wdc.com> Signed-off-by:
Mike Snitzer <snitzer@redhat.com>
-
Hannes Reinecke authored
When allocating a zone, pass in an indicator on which device the zone should be allocated; this increases performance for a multi-device setup because reclaim will now allocate zones on the device for which reclaim is running. Signed-off-by:
-
Hannes Reinecke authored
Remove the hard-coded limit of two devices and support an unlimited number of additional zoned devices. Signed-off-by:
-
Hannes Reinecke authored
Random and sequential zones should be part of the respective device structure to make arbitration between devices possible. Signed-off-by:
-
Hannes Reinecke authored
Instead of having one reclaim workqueue for the entire set we should be allocating a reclaim workqueue per device; doing so will reduce contention and should boost performance for a multi-device setup. Signed-off-by:
-
Hannes Reinecke authored
Add a metadata pointer within struct dmz_dev and use it as argument for blkdev_report_zones() instead of the metadata itself. Signed-off-by:
-
Hannes Reinecke authored
Add a pointer, to the containing device, within struct dm_zone and kill dmz_zone_to_dev(). Signed-off-by:
-
Hannes Reinecke authored
Checking the tertiary superblock just consists of validating UUIDs, crcs, and the generation number; it doesn't have contents which would be required during the actual operation. So allocate a temporary superblock when checking tertiary devices to avoid having to store it together with the 'real' superblocks. Signed-off-by:
-
Hannes Reinecke authored
The zones array is getting really large, and large arrays tend to wreak havoc with the CPU caches. So convert it to xarray to become more cache friendly. Signed-off-by:
-
Hannes Reinecke authored
Instead of counting the number of reserved zones in dmz_free_zone(), mark the zone as 'reserved' during allocation and simplify dmz_free_zone(). Signed-off-by:
-
Hannes Reinecke authored
Instead of just reporting the errno, add some more verbose debugging message in the reclaim path. Signed-off-by:
-
Hannes Reinecke authored
The secondary superblock must reside on the same device as the primary superblock, so there is no need to re-calculate the device. Signed-off-by:
-
Hannes Reinecke authored
Signed-off-by:
-
Mikulas Patocka authored
Use dm_bufio_forget_buffers instead of a block-by-block loop that calls dm_bufio_forget. dm_bufio_forget_buffers is faster than the loop because it searches for used buffers using rb-tree. Signed-off-by:
Mikulas Patocka <mpatocka@redhat.com> Signed-off-by:
-
Mikulas Patocka authored
Introduce a function forget_buffer_locked that forgets a range of buffers. It is more efficient than calling forget_buffer in a loop. Signed-off-by:
-
Mikulas Patocka authored
dm-bufio uses unnatural ordering in the rb-tree - blocks with smaller numbers were put to the right node and blocks with bigger numbers were put to the left node. Reverse that logic so that it's natural. Signed-off-by:
-
Mikulas Patocka authored
Signed-off-by:
-
- Jun 05, 2020
-
-
Mikulas Patocka authored
There is no user for this interface. If in future it is needed it can be reimplemented to walk the rbtree of buffers instead of doing block-by-block lookups. Signed-off-by:
-
- May 23, 2020
-
-
Hannes Reinecke authored
Remove a leftover hunk to switch from random zones to sequential zones when selecting a reclaim zone; the logic has moved into the caller and this hunk is now pointless. Fixes: 34f5affd ("dm zoned: separate random and cache zones") Signed-off-by:
-
- May 21, 2020
-
-
Hannes Reinecke authored
When dmz_get_chunk_mapping() selects a zone which is under reclaim we should terminate the reclaim copy process. Since we're changing the zone itself, reclaim needs to run afterwards again anyway. Signed-off-by:
-
Hannes Reinecke authored
Sequential zones perform better for reclaim, so start off using them and only use random zones as a fallback when cache zones are present. Signed-off-by:
-
Hannes Reinecke authored
When the system is idle we should be starting reclaiming random zones, too. Signed-off-by:
-
Hannes Reinecke authored
Instead of lumping emulated zones together with random zones we should be handling them as separate 'cache' zones. This improves code readability and allows an easier implementation of different cache policies. Also add additional allocation flags, to separate the type (cache, random, or sequential) from the purpose (eg reclaim). Also switch the allocation policy to not use random zones as buffer zones if cache zones are present. This avoids a performance drop when all cache zones are used. Signed-off-by:
-
Hannes Reinecke authored
The only case where dmz_get_zone_for_reclaim() cannot return a zone is if the respective lists are empty. So we should just return a simple NULL value here as we really don't have an error code which would make sense. Signed-off-by:
-
Nathan Chancellor authored
When building arm32 allyesconfig: ld.lld: error: undefined symbol: __aeabi_uldivmod >>> referenced by dm-zoned-target.c >>> md/dm-zoned-target.o:(dmz_ctr) in archive drivers/built-in.a dmz_fixup_devices uses DIV_ROUND_UP with variables of type sector_t. As such, it should be using DIV_ROUND_UP_SECTOR_T, which handles this automatically. Fixes: 70978208ec91 ("dm zoned: metadata version 2") Signed-off-by:Nathan Chancellor <natechancellor@gmail.com> Reviewed-by:
-
Mike Snitzer authored
Now that DMDEBUG uses pr_debug and DMDEBUG_LIMIT uses pr_debug_ratelimited cleanup DM's 2 direct pr_debug callers to use them to get the benefit of consistent DM_FMT formatting of debugging messages. While doing so, dm-mpath.c:dm_report_EIO() was switched over to using DMDEBUG_LIMIT due to the potential for error handling floods in the IO completion path. Signed-off-by: -
Hannes Reinecke authored
DMDEBUG will already add a newline to the logging messages, so we shouldn't be adding it to the message itself. Signed-off-by:
-
Hannes Reinecke authored
Switch to use dynamic debug to avoid having recompile the kernel just to enable debugging messages. Signed-off-by:
-
Gustavo A. R. Silva authored
The current codebase makes use of the zero-length array language extension to the C90 standard, but the preferred mechanism to declare variable-length types such as these ones is a flexible array member[1][2], introduced in C99: struct foo { int stuff; struct boo array[]; }; By making use of the mechanism above, we will get a compiler warning in case the flexible array does not occur last in the structure, which will help us prevent some kind of undefined behavior bugs from being inadvertently introduced[3] to the codebase from now on. Also, notice that, dynamic memory allocations won't be affected by this change: "Flexible array members have incomplete type, and so the sizeof operator may not be applied. As a quirk of the original implementation of zero-length arrays, sizeof evaluates to zero."[1] sizeof(flexible-array-member) triggers a warning because flexible array members have incomplete type[1]. There are some instances of code in which the sizeof operator is being incorrectly/erroneously applied to zero-length arrays and the result is zero. Such instances may be hiding some bugs. So, this work (flexible-array member conversions) will also help to get completely rid of those sorts of issues. This issue was found with the help of Coccinelle. [1] https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html [2] https://github.com/KSPP/linux/issues/21 [3] commit 76497732 ("cxgb3/l2t: Fix undefined behaviour") Signed-off-by:Gustavo A. R. Silva <gustavoars@kernel.org> Signed-off-by:
-
Hannes Reinecke authored
Implement handling for metadata version 2. The new metadata adds a label and UUID for the device mapper device, and additional UUID for the underlying block devices. It also allows for an additional regular drive to be used for emulating random access zones. The emulated zones will be placed logically in front of the zones from the zoned block device, causing the superblocks and metadata to be stored on that device. The first zone of the original zoned device will be used to hold another, tertiary copy of the metadata; this copy carries a generation number of 0 and is never updated; it's just used for identification. Signed-off-by:
Bob Liu <bob.liu@oracle.com> Reviewed-by:
-
Hannes Reinecke authored
When looking up zones in dmz_alloc_zone() we need to ignore metadata zones so as not to accidentally overwrite metadata. Signed-off-by:
-
Hannes Reinecke authored
dm-zoned is becoming quite chatty during startup; reduce the noise by moving some information to 'debug' level. Suggested-by:
-
Hannes Reinecke authored
Use the metadata label for logging and not the underlying device. Signed-off-by:
-
- May 20, 2020
-
-
Hannes Reinecke authored
Use accessors to retrieve the device pointer in preparation for adding an additional block device. Signed-off-by:
-
Hannes Reinecke authored
Replace the 'target' pointer in the bio context with the device pointer as this is what's actually used. Signed-off-by:
-
Hannes Reinecke authored
Use the dmz_zone_to_dev() mapping function to remove the 'dev' argument from reclaim. Signed-off-by:
-
- May 15, 2020
-
-
Hannes Reinecke authored
Introduce accessors dmz_dev_is_dying() and dmz_check_dev() to avoid having to reference the devices directly. Signed-off-by:
-
Hannes Reinecke authored
Introduce dmz_metadata_label() to format the device-mapper device name and use it instead of the device name of the underlying device. Signed-off-by:
-
Hannes Reinecke authored
Move fields from the device structure into the metadata structure and provide accessor functions. Signed-off-by:
-
Hannes Reinecke authored
Store the device together with the superblock so that we don't have to recur to the metadata to find it. Signed-off-by:
-
