Introduce compatible "qcom,scmi-smc" for SCMI smc/hvc transport channel for
Qualcomm virtual platforms.

This compatible mandates populating an additional parameter 'capability-id'
from the last 8 bytes of the shmem channel.

Signed-off-by: Nikunj Kela <quic_nkela@quicinc.com>
Reviewed-by: Brian Masney <bmasney@redhat.com>
Link: https://lore.kernel.org/r/20231009191437.27926-2-quic_nkela@quicinc.com


Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>

All the parameters to arm_smccc_1_1_invoke() are unsigned long which
aligns well on both 32-bit and 64-bit Arm based platforms. Let us store
all the members in the structure scmi_smc used as the parameters to the
arm_smccc_1_1_invoke() call as unsigned long.

Cc: Cristian Marussi <cristian.marussi@arm.com>
Reviewed-by: Cristian Marussi <cristian.marussi@arm.com>
Link: https://lore.kernel.org/r/20231009152049.1428872-1-sudeep.holla@arm.com


Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>

SCMI v3.2 adds set/get parent clock commands, so update the SCMI clock
driver to support them.

Signed-off-by: Peng Fan <peng.fan@nxp.com>
Link: https://lore.kernel.org/r/20231004-scmi-clock-v3-v5-2-1b8a1435673e@nxp.com


Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>

SCMI v3.2 spec introduces CLOCK_POSSIBLE_PARENTS_GET, CLOCK_PARENT_SET
and CLOCK_PARENT_GET. Add support for these to enable clock parents
and use them in the clock driver.

Reviewed-by: Cristian Marussi <cristian.marussi@arm.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Link: https://lore.kernel.org/r/20231004-scmi-clock-v3-v5-1-1b8a1435673e@nxp.com


Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>

Add the missing devm_kfree() when we skip the clocks with invalid or
missing information from the firmware.

Cc: Cristian Marussi <cristian.marussi@arm.com>
Cc: Michael Turquette <mturquette@baylibre.com>
Cc: Stephen Boyd <sboyd@kernel.org>
Cc: linux-clk@vger.kernel.org
Fixes: 6d6a1d82 ("clk: add support for clocks provided by SCMI")
Link: https://lore.kernel.org/r/20231004193600.66232-1-sudeep.holla@arm.com


Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>

Use preferred device_get_match_data() instead of of_match_device() to
get the driver match data. With this, adjust the includes to explicitly
include the correct headers.

Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20231006224650.445424-1-robh@kernel.org


Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>

To allow a consumer driver to use the OPP library to scale the performance
for its device, let's dynamically add the OPP table when the device gets
attached to its SCMI performance domain.

Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Link: https://lore.kernel.org/r/20230925131715.138411-10-ulf.hansson@linaro.org


Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>

To enable the performance level to be used for OPPs, let's convert into
using the dev_pm_opp_add_dynamic() API when creating them. This will be
particularly useful for the SCMI performance domain, as shown through
subsequent changes.

Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Link: https://lore.kernel.org/r/20230925131715.138411-9-ulf.hansson@linaro.org


Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>

Let's simplify the code in scmi_dvfs_device_opps_add() by using
dev_pm_opp_remove_all_dynamic() in the error path.

Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Link: https://lore.kernel.org/r/20230925131715.138411-8-ulf.hansson@linaro.org


Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>

Merge branch 'opp/pm-domain-scmi' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm into for-next/scmi/updates

This is the merge of immutable point in PM OPP tree shared with SCMI so
that the SCMI changes based on these OPP changes can be merged via the
SCMI tree.

* 'opp/pm-domain-scmi' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm:
  OPP: Extend support for the opp-level beyond required-opps
  OPP: Switch to use dev_pm_domain_set_performance_state()
  OPP: Extend dev_pm_opp_data with a level
  OPP: Add dev_pm_opp_add_dynamic() to allow more flexibility
  PM: domains: Implement the ->set_performance_state() callback for genpd
  PM: domains: Introduce dev_pm_domain_set_performance_state()

At this point the level (performance state) for an OPP is currently limited
to be requested for a device that is attached to a PM domain.  Moreover,
the device needs to have the so called required-opps assigned to it, which
are based upon OPP tables being described in DT.

To extend the support beyond required-opps and DT, let's enable the level
to be set for all OPPs. More precisely, if the requested OPP has a valid
level let's try to request it through the device's optional PM domain, via
calling dev_pm_domain_set_performance_state().

Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
[ Viresh: Handle NULL opp in _set_opp_level() ]
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>

To support performance scaling for any kinds of PM domains, let's move away
from using the genpd specific API, dev_pm_genpd_set_performance_state(), to
the common dev_pm_domain_set_performance_state().

No intended functional impact at this point.

Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>

Let's extend the dev_pm_opp_data with a level variable, to allow users to
specify a corresponding level (performance state) for a dynamically added
OPP.

Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>

The dev_pm_opp_add() API is limited to add dynamic OPPs with a frequency
and a voltage level. To enable more flexibility, let's add a new API,
dev_pm_opp_add_dynamic() that's takes a struct dev_pm_opp_data* instead of
a list of in-parameters.

Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>

To enable generic support for performance scaling for PM domains, let's
implement the ->set_performance_state() callback for genpd.

Beyond this change, users of the corresponding genpd specific API,
dev_pm_genpd_set_performance_state() are encouraged to switch to the common
dev_pm_domain_set_performance_state() API.

Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>

The generic PM domain is currently the only PM domain variant that supports
performance scaling. To allow performance scaling to be supported through a
common interface, let's add an optional callback ->set_performance_state(),
in the struct dev_pm_domain.

Moreover, let's add a function, dev_pm_domain_set_performance_state(), that
may be called by consumers to request a new performance state for a device
through its PM domain.

Note that, in most cases it's preferred that a consumer use the OPP library
to request a new performance state for its device. Although, this requires
some additional changes to be supported, which are being implemented from
subsequent changes.

Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>

It is very confusing to use *_v2 for everything applicable until SCMI
clock protocol version v2.0 including v1.0 for example. So let us rename
such that *_v2 is used only for SCMI clock protocol v2.1 onwards. Also
add comment to indicate the same explicitly.

Reviewed-by: Cristian Marussi <cristian.marussi@arm.com>
Link: https://lore.kernel.org/r/20230925101557.3839860-1-sudeep.holla@arm.com


Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>

Both pc->async_powercap_cap_set and ignore_dresp are already boolean.
Use of !! on them is obviously dubious.

Sparse reports:
drivers/firmware/arm_scmi/powercap.c:363:17: warning: dubious: x & !y
drivers/firmware/arm_scmi/powercap.c:363:17: warning: dubious: x & !y

Remove the unnecessary !! and get rid of the warning.

Reviewed-by: Cristian Marussi <cristian.marussi@arm.com>
Link: https://lore.kernel.org/r/20230921085257.3125744-1-sudeep.holla@arm.com


Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>

To simplify with maintenance let's move the Arm SCMI power-domain driver
to the new pmdomain directory.

Link: https://lore.kernel.org/all/20230921113328.3208651-1-sudeep.holla@arm.com


Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Cc: Cristian Marussi <cristian.marussi@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>

To enable support for performance scaling (DVFS) for generic devices with
the SCMI performance protocol, let's add an SCMI performance domain. This
is being modelled as a genpd provider, with support for performance scaling
through genpd's ->set_performance_state() callback.

Note that, this adds the initial support that allows consumer drivers for
attached devices, to vote for a new performance state via calling the
dev_pm_genpd_set_performance_state(). However, this should be avoided as
it's in most cases preferred to use the OPP library to vote for a new OPP
instead. The support using the OPP library isn't part of this change, but
needs to be implemented from subsequent changes.

Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Link: https://lore.kernel.org/r/20230919121605.7304-1-ulf.hansson@linaro.org


Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>

In some cases the OPP tables aren't specified in device tree, but rather
encoded in the FW. To allow a genpd provider to specify them dynamically
instead, let's add a new genpd flag, GENPD_FLAG_OPP_TABLE_FW.

Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Link: https://lore.kernel.org/r/20230825112633.236607-13-ulf.hansson@linaro.org


Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>

The performance domain-id can be described in DT using the power-domains
property or the clock property. The latter is already supported, so let's
add support for the power-domains too.

Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Link: https://lore.kernel.org/r/20230825112633.236607-12-ulf.hansson@linaro.org


Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>

The power-domains bindings has in many years been used to describe so
called performance-domains too. Rather than using a separate binding it has
been convenient to re-use the power-domain bindings, as in some cases it's
in fact a combination of the both that would be the best description.

Therefore, let's make it more clear that the power-domains bindings can be
used to describe a performance-domain too.

Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net>
Cc: Kevin Hilman <khilman@kernel.org>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>
Cc: Conor Dooley <conor+dt@kernel.org>
Cc: devicetree@vger.kernel.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20230825112633.236607-11-ulf.hansson@linaro.org


Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>

The protocol@13 node is describing the performance scaling option for the
ARM SCMI interface, as a clock provider. This is unnecessary limiting, as
performance scaling is in many cases not limited to switching a clock's
frequency.

Therefore, let's extend the binding so the interface can be modelled as a
generic performance domain too. The common way to describe this, is to use
the power-domain DT bindings, so let's use that.

Cc: Rob Herring <robh+dt@kernel.org>
Cc: Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>
Cc: Conor Dooley <conor+dt@kernel.org>
Cc: devicetree@vger.kernel.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20230825112633.236607-10-ulf.hansson@linaro.org


Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>

When an CPU's performance domain is managed through the SCMI firmware,
let's enable us describe this as a consumer of a power-domain provider,
which is the de-facto standard to use for performance domains. In this
case, let's specify a corresponding power-domain-name, to point out the
corresponding index for it.

Cc: Rob Herring <robh+dt@kernel.org>
Cc: Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>
Cc: Conor Dooley <conor+dt@kernel.org>
Cc: devicetree@vger.kernel.org
Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20230825112633.236607-9-ulf.hansson@linaro.org


Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>

The domain-id for the cpu_dev has already been parsed at the point when
scmi_get_sharing_cpus() is getting called. Let's pass it as an in-parameter
to avoid the unnecessary OF parsing.

Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Link: https://lore.kernel.org/r/20230825112633.236607-7-ulf.hansson@linaro.org


Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>

There are no longer any users of the ->device_domain_id() ops in the
scmi_perf_proto_ops, therefore let's remove it.

Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Link: https://lore.kernel.org/r/20230825112633.236607-6-ulf.hansson@linaro.org


Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>

Most scmi_perf_proto_ops are already using an "u32 domain" as an
in-parameter to indicate what performance domain we shall operate upon.
However, some of the ops are using a "struct device *dev", which means that
an additional OF parsing is needed each time the perf ops gets called, to
find the corresponding domain-id.

To avoid the above, but also to make the code more consistent, let's
replace the in-parameter "struct device *dev" with an "u32 domain". Note
that, this requires us to make some corresponding changes to the scmi
cpufreq driver, so let's do that too.

Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Link: https://lore.kernel.org/r/20230825112633.236607-5-ulf.hansson@linaro.org


Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>

The OF parsing of the clock domain specifier seems to better belong in the
scmi cpufreq driver, rather than being implemented behind the generic
->device_domain_id() perf protocol ops.

To prepare to remove the ->device_domain_id() ops, let's implement the OF
parsing in the scmi cpufreq driver instead.

Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Link: https://lore.kernel.org/r/20230825112633.236607-4-ulf.hansson@linaro.org


Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>

Similar to other protocol ops, it's useful for an scmi module driver to get
some generic information of a performance domain. Therefore, let's add a
new callback to provide this information. The information is currently
limited to the name of the performance domain and whether the set-level
operation is supported, although this can easily be extended if we find the
need for it.

Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Link: https://lore.kernel.org/r/20230825112633.236607-3-ulf.hansson@linaro.org


Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>

Similar to other protocol ops, it's useful for an scmi module driver to get
the number of supported performance domains, hence let's make this
available by adding a new perf protocol callback. Note that, a user is
being added from subsequent changes.

Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Link: https://lore.kernel.org/r/20230825112633.236607-2-ulf.hansson@linaro.org


Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>

Expose a couple of new SCMI clock operations to get and set OEM specific
clock configurations when talking to an SCMI v3.2 compliant.

Issuing such requests against an SCMI platform server not supporting v3.2
extension for OEM specific clock configurations will fail.

Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Link: https://lore.kernel.org/r/20230826125308.462328-7-cristian.marussi@arm.com


Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>

Add support for .is_enabled atomic clk_ops using the related SCMI clock
operation in atomic mode, if available.

Note that the .is_enabled callback will be supported by this SCMI clock
driver only if the configured underlying SCMI transport does support atomic
operations.

CC: Michael Turquette <mturquette@baylibre.com>
CC: Stephen Boyd <sboyd@kernel.org>
CC: linux-clk@vger.kernel.org
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Acked-by: Stephen Boyd <sboyd@kernel.org>
Link: https://lore.kernel.org/r/20230826125308.462328-6-cristian.marussi@arm.com


Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>

Support clock .state_get operation against SCMI platform servers that do
not support v3.2 CONFIG_GET dedicated command: while talking with these
platforms the command CLOCK_ATTRIBUTES can be used to gather the current
clock states.

Note that, in case of shared resources, the retrieved clock state 'flavour'
(virtual vs physical) depends on the backend SCMI platform server specific
kind of implementation.

Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Link: https://lore.kernel.org/r/20230826125308.462328-5-cristian.marussi@arm.com


Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>

Add support for v3.2 clock CONFIG_GET command and related new clock
protocol operation state_get() to retrieve the status of a clock.

Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Link: https://lore.kernel.org/r/20230826125308.462328-4-cristian.marussi@arm.com


Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>

SCMI v3.2 introduces a new clock CONFIG_SET message format that can
optionally carry also OEM specific configuration values beside the usual
clock enable/disable requests.

Refactor internal helpers and add support to use such new format when
talking to a v3.2 compliant SCMI platform.

Support existing enable/disable operations across different clock protocol
versions: this patch still does not add protocol operations to support the
new OEM specific optional configuration capabilities.

No functional change for the SCMI drivers users of the related enable and
disable clock operations.

Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Link: https://lore.kernel.org/r/20230826125308.462328-3-cristian.marussi@arm.com


Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>

SCMI clock enable/disable operations come in 2 different flavours which
simply just differ in how the underlying SCMI transactions is carried on:
atomic or not.

Currently we expose such SCMI operations through 2 distinctly named
wrappers, that, in turn, are wrapped into another couple of similarly and
distinctly named callbacks inside SCMI clock driver user.

Reduce the churn of duplicated wrappers by adding a param to SCMI clock
enable/disable operations to ask for atomic operation while removing the
_atomic version of such operations.

No functional change.

CC: Michael Turquette <mturquette@baylibre.com>
CC: Stephen Boyd <sboyd@kernel.org>
CC: linux-clk@vger.kernel.org
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Acked-by: Stephen Boyd <sboyd@kernel.org>
Link: https://lore.kernel.org/r/20230826125308.462328-2-cristian.marussi@arm.com


Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>

Pull x86 fixes from Ingo Molnar:
 "Misc fixes:

   - Fix an UV boot crash

   - Skip spurious ENDBR generation on _THIS_IP_

   - Fix ENDBR use in putuser() asm methods

   - Fix corner case boot crashes on 5-level paging

   - and fix a false positive WARNING on LTO kernels"

* tag 'x86-urgent-2023-09-17' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/purgatory: Remove LTO flags
  x86/boot/compressed: Reserve more memory for page tables
  x86/ibt: Avoid duplicate ENDBR in __put_user_nocheck*()
  x86/ibt: Suppress spurious ENDBR
  x86/platform/uv: Use alternate source for socket to node data

Pull scheduler fixes from Ingo Molnar:
 "Fix a performance regression on large SMT systems, an Intel SMT4
  balancing bug, and a topology setup bug on (Intel) hybrid processors"

* tag 'sched-urgent-2023-09-17' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/sched: Restore the SD_ASYM_PACKING flag in the DIE domain
  sched/fair: Fix SMT4 group_smt_balance handling
  sched/fair: Optimize should_we_balance() for large SMT systems