- May 07, 2014
-
-
Ulf Hansson authored
Clients may still be active in the early phase of system PM, thus we need to move the suspend operations to the late system PM phase. Signed-off-by:
Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by:
Vinod Koul <vinod.koul@intel.com>
-
Daniel Mack authored
A channel can accommodate more than one transaction, each consisting of multiple descriptors, the last of which has the DCMD_ENDIRQEN bit set. In order to report the channel's residue, we hence have to walk the list of running descriptors, look for those which match the cookie, and then try to find the descriptor which defines upper and lower boundaries that embrace the current transport pointer. Once it is found, walk forward until we find the descriptor that tells us about the end of a transaction via a set DCMD_ENDIRQEN bit. Signed-off-by:
Daniel Mack <zonque@gmail.com> Signed-off-by:
-
Ulf Hansson authored
Make sure to handle register context save/restore when needed from system PM callbacks. Previously we solely trusted the device to reside in in-active state while the system suspend callback were invoked, which is just too optimistic. Signed-off-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
-
Ulf Hansson authored
Converting to the PM macros makes us simplify and remove some code. Signed-off-by:
-
Ulf Hansson authored
While probing, don't rely on CONFIG_PM_RUNTIME to be configured. Instead, let's power up the device and make it fully operational. Update the runtime PM status to reflect the active state. Signed-off-by:
-
Ulf Hansson authored
The runtime PM resume callback needs to be executed while holding the spinlock, make sure to maintain this for the pause operation as well. Signed-off-by:
-
Andy Shevchenko authored
The commit 4501fe61 "dma: dw: Add suspend and resume handling for PCI mode DW_DMAC." introduces system power management callbacks. Regarding to commit f78c4cff "PM / Sleep: Add macro to define common late/early system PM callbacks" we have nice macro to setup dev_pm_ops structure. This patch converts a driver to use the macro. Signed-off-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by:
-
Andy Shevchenko authored
There is no need to use *_noirq version of suspend and resume PM callbacks. The suspend_late / resume_early suit better (it was discussed in [1]) and in future could be used for runtime PM support. [1] http://www.spinics.net/lists/kernel/msg1650974.html Signed-off-by:
-
- May 03, 2014
-
-
Alexander Popov authored
Fix mpc_dma_probe() error path and mpc_dma_remove(): manually free IRQs and dispose IRQ mappings before devm_* takes care of other resources. Moreover replace devm_request_irq() with request_irq() since there is no need to use it because the original code always frees IRQ manually with devm_free_irq(). Replace devm_free_irq() with free_irq() accordingly. Signed-off-by:
Alexander Popov <a13xp0p0v88@gmail.com> Signed-off-by:
-
Alexander Popov authored
MPC512x and MPC8308 have similar DMA controllers, but are independent SoCs. DMA controller driver should have separate 'compatible' values for these SoCs. Signed-off-by:
-
Alexander Popov authored
Concentrate the specific code for MPC8308 in the 'if' branch and handle MPC512x in the 'else' branch. This modification only reorders instructions but doesn't change behaviour. Signed-off-by:
Anatolij Gustschin <agust@denx.de> Signed-off-by:
-
Hongbo Zhang authored
These functions will be modified in the next patch in the series. By moving the function in a patch separate from the changes, it will make review easier. Signed-off-by:
Hongbo Zhang <hongbo.zhang@freescale.com> Signed-off-by:
Qiang Liu <qiang.liu@freescale.com> Signed-off-by:
-
Hongbo Zhang authored
There are several places where descriptors are freed using identical code. This patch puts this code into a function to reduce code duplication. Signed-off-by:
-
Hongbo Zhang authored
Delete attribute DMA_INTERRUPT because fsldma doesn't support this function, exception will be thrown if talitos is used to offload xor at the same time. Signed-off-by:
-
Hongbo Zhang authored
Methods of accessing DMA controller registers are inconsistent, some registers are accessed by DMA_IN/OUT directly, while others are accessed by functions get/set_* which are wrappers of DMA_IN/OUT, and even for the BCR register, it is read by get_bcr but written by DMA_OUT. This patch unifies the inconsistent methods, all registers are accessed by get/set_* now. Signed-off-by:
-
Hongbo Zhang authored
Some codes are calling chan_dbg with FSL_DMA_LD_DEBUG surrounded, it is really unnecessary to use such a macro because chan_dbg is a wrapper of dev_dbg, we do have corresponding DEBUG macro to switch on/off dev_dbg, and most of the other codes are also calling chan_dbg directly without using FSL_DMA_LD_DEBUG. Signed-off-by:
-
Kuninori Morimoto authored
This patch add cyclic transfer support and enables dmaengine_prep_dma_cyclic() Signed-off-by:
Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> [reflown changelog for readablity] Signed-off-by:
-
Kuninori Morimoto authored
Current shdma is using "last" which indicates last desc which needs to have callback function. But that desc's chunks is always 1, we can use it as finder Signed-off-by:
-
- May 02, 2014
-
-
Laurent Pinchart authored
Use sizeof(*var) instead of sizeof(type) when calling devm_k*alloc(). This avoids using the wrong type as was done to allocate the physical channels array. Signed-off-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by:
-
Laurent Pinchart authored
As the physical channel and virtual channel point to each other, pchan->phy->vchan is always equal to pchan. Simplify the code accordingly. Signed-off-by:
-
Laurent Pinchart authored
The property is optional and defaults to 32. Document it as such. Cc: devicetree@vger.kernel.org Signed-off-by:
-
- Apr 30, 2014
-
-
Joel Fernandes authored
edma param struct is now within an edma_pset struct introduced in Thomas Gleixner's edma tx status series. Update memcpy function for the same. Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by:
Joel Fernandes <joelf@ti.com> Signed-off-by:
-
Joel Fernandes authored
The granular residue accounting code uses certain variables specifically for residue accounting. Document these in the structure declaration. Also move around some elements and group them together. Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by:
-
Thomas Gleixner authored
The first slot in the ParamRAM of EDMA holds the current active subtransfer. Depending on the direction we read either the source or the destination address from there. In the internal psets we have the address of the buffer(s). In the cyclic case we only use the internal pset[0] which holds the start address of the circular buffer and calculate the remaining room to the end of the buffer. In the SG case we read the current address and compare it to the internal psets address and length. - If the current address is outside of this range, the pset has been processed already and we mark it done, update the residue_stat value and process the next set. That avoids that we need to walk all processed psets for every invocation of tx_status. - If its inside the range we know that we look at the current active set and stop the walk. - In case of intermediate transfers we update the stats in the interrupt callback function before starting the next batch of transfers. The tx_status callback and the interrupt callback are serialized via vchan.lock. Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> [joelf@ti.com: Hunk #2 in original patch manually applied] Signed-off-by:
-
Thomas Gleixner authored
As Joel pointed out, edma_read_position() uses memcpy_fromio() to read the parameter ram. That's not synchronized with the internal update as it does a byte by byte copy. We need to do a 32bit read to get a consistent value. Further reading destination and source is pointless. In DEV_TO_MEM transfers we are only interested in the destination, in MEM_TO_DEV we care about the source. In MEM_TO_MEM it really does not matter which one you read. Simple solution: Remove the pointers, select dest/source via a bool and return the read value. Remove the export of this function while at it. The only potential user is the dmaengine and that's always builtin. Signed-off-by:
Sekhar Nori <nsekhar@ti.com> Signed-off-by:
-
Thomas Gleixner authored
For granular accounting we need to store the direction and the information for the individual psets: - source or destination address, depending on direction - length Signed-off-by:
-
Thomas Gleixner authored
Preparatory patch to support finer grained accounting. Move the edma_params array out of edma_desc so we can add further per pset data to it. Signed-off-by:
-
Thomas Gleixner authored
It's likely that the caller investigates the status of a currently active descriptor. Make that simple check first and only rumage in the vchan list if that fails. Signed-off-by:
-
Thomas Gleixner authored
The residue reporting in edma_tx_status() is just broken. It blindly walks the psets and recalculates the lenght of the transfer from the hardware parameters. For cyclic transfers it adds the link pset, which results in interestingly large residues. For non-cyclic it adds the dummy pset, which is stupid as well. Aside of that it's silly to walk through the pset params when the per descriptor residue is known at the point of creating it. Store the information in edma_desc and use it. Signed-off-by:
-
- Apr 29, 2014
-
-
Peter Ujfalusi authored
It helps to identify issues if we have some information regarding to the channel which the event is associated. Signed-off-by:
Peter Ujfalusi <peter.ujfalusi@ti.com> Acked-by:
-
- Apr 23, 2014
-
-
Joel Fernandes authored
The vchan lock in edma_callback is acquired in hard interrupt context. As interrupts are already disabled, there's no point in save/restoring interrupt mask bit or cpsr flags. Get rid of flags local variable and use spin_lock instead of spin_lock_irqsave. Signed-off-by:
-
Joel Fernandes authored
We add DMA memcpy support to EDMA driver. Successful tests performed using dmatest kernel module. Copy alignment is set to DMA_SLAVE_BUSWIDTH_4_BYTES and users must ensure length is aligned so that copy is performed fully. Signed-off-by:
-
Peter Ujfalusi authored
In case of not supported direction it is better to print the direction also. It is unlikely, but in such an event it helps with the debugging. Signed-off-by:
-
Peter Ujfalusi authored
prep_slave_sg and prep_dma_cyclic callbacks have mostly same failure cases with the same texts printed in case we hit them. It helps when debugging if we know exactly which callback generated the errors. At the same time change the debug level for descriptor allocation failure from dbg to err since all other error cases are dev_err and this failure is similarly fatal as the other ones. Signed-off-by:
-
Peter Ujfalusi authored
With the callback implemented omap-dma can provide information to client drivers regarding to supported address widths, directions, residue granularity, etc. Signed-off-by:
-
Peter Ujfalusi authored
Do not print the paRAM information when verbose debugging is not asked and also reduce the number of lines printed in edma_prep_dma_cyclic() Signed-off-by:
-
Peter Ujfalusi authored
Indicate that the edma dmaengine driver has support for cyclic mode. Signed-off-by:
-
Peter Ujfalusi authored
Pause/Resume can be used by the audio stack when the stream is paused/resumed The edma platform code has support for this and the legacy audio stack used this. Signed-off-by:
-
Peter Ujfalusi authored
When clients asks for maxburst = 0 it is basically the same case as if they were asking for maxburst = 1 since in both case ASYNC need to be used and the eDMA is expected to write/read one word per DMA request. Signed-off-by:
-
Peter Ujfalusi authored
For later use save the number of queues available for the CC. Signed-off-by:
-
