- Sep 18, 2005
-
-
Arnaldo Carvalho de Melo authored
Moving the TFRC sender and receiver variables to separate structs, so that we can copy these structs to userspace thru getsockopt, dccp_diag, etc. Signed-off-by:
Arnaldo Carvalho de Melo <acme@mandriva.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Arnaldo Carvalho de Melo authored
Isolating it, that will be used when we introduce a CCID2 (TCP-Like) implementation. Signed-off-by:
-
David S. Miller authored
-
Linus Torvalds authored
They seem to have been due to AMD errata 63/122; the fix is to disable TLB flush filtering in SMP configurations. Confirmed to fix the problem by Andrew Walrond <andrew@walrond.org> [ Let's see if we'll have a better fix eventually, this is the Q&D "let's get this fixed and out there" version ] Signed-off-by:Linus Torvalds <torvalds@osdl.org>
-
Karsten Keil authored
The old driver was not fully adapted to new USB ABI and does not work. Signed-off-by:
Karsten Keil <kkeil@suse.de> Signed-off-by:
-
Adam Kropelin authored
PCI_ROM_ADDRESS is a 32 bit register and as such should be accessed using pci_bus_{read,write}_config_dword(). A recent audit of drivers/ turned up several cases of byte- and word-sized accesses. The harmful ones were fixed by Linus directly. This patches up one of the remaining harmless-but-still-wrong cases caught in the dragnet. Signed-off-by:Adam Kropelin <akropel1@rochester.rr.com> Cc: Andrew Vasquez <andrew.vasquez@qlogic.com> Cc: Greg KH <greg@kroah.com> Signed-off-by:
Andrew Morton <akpm@osdl.org> Signed-off-by:
-
Adam Kropelin authored
PCI_ROM_ADDRESS is a 32 bit register and as such should be accessed using pci_bus_{read,write}_config_dword(). A recent audit of drivers/ turned up several cases of byte- and word-sized accesses. The harmful ones were fixed by Linus directly. This patches up one of the remaining harmless-but-still-wrong cases caught in the dragnet. Signed-off-by: -
Adam Kropelin authored
PCI_ROM_ADDRESS is a 32 bit register and as such should be accessed using pci_bus_{read,write}_config_dword(). A recent audit of drivers/ turned up several cases of byte- and word-sized accesses. The harmful ones were fixed by Linus directly. This patches up one of the remaining harmless-but-still-wrong cases caught in the dragnet. Signed-off-by: -
Adam Kropelin authored
PCI_ROM_ADDRESS is a 32 bit register and as such should be accessed using pci_bus_{read,write}_config_dword(). A recent audit of drivers/ turned up several cases of byte- and word-sized accesses. The harmful ones were fixed by Linus directly. This patches up one of the remaining harmless-but-still-wrong cases caught in the dragnet. Signed-off-by: -
Timothy Thelin authored
When doing ioctl HDIO_DRIVE_TASKFILE, the ide_task_t's request pointer is never set, but flagged_taskfile and do_rw_taskfile pass it as a parameter to the prehandler. The kernel will oops taskfile pio-out commands because of this (taskfile pio-in doesn't use a prehandler). This fix sets the request pointer at the time the request is created to stop this oops. Signed-off-by:
Timothy Thelin <timothy.thelin@wdc.com> Cc: "Bartlomiej Zolnierkiewicz" <bzolnier@gmail.com> Signed-off-by:
-
Jens Axboe authored
Here's the patch from http://bugzilla.kernel.org/show_bug.cgi?id=4853 It is a feeble attempt at fixing the request handling in pf, it is totally foobar right now. Signed-off-by:
Jens Axboe <axboe@suse.de> Signed-off-by:
-
OGAWA Hirofumi authored
This patch fixes miss-sync issue on write() system call. This updates inode attrs flags, mtime and ctime on every comit_write call, due to locking. Signed-off-by:
Hiroyuki Machida <machida@sm.sony.co.jp> Signed-off-by:
OGAWA Hirofumi <hirofumi@mail.parknet.co.jp> Signed-off-by:
-
Dipankar Sarma authored
With the new fdtable locking rules, you have to protect fdtable with either ->file_lock or rcu_read_lock/unlock(). There are some places where we aren't doing either. This patch fixes those places. Signed-off-by:
Dipankar Sarma <dipankar@in.ibm.com> Signed-off-by:
-
Pekka J Enberg authored
This patch adds a new chapter on memory allocation to Documentation/CodingStyle. Signed-off-by:
Pekka Enberg <penberg@cs.helsinki.fi> Signed-off-by:
-
Andrew Morton authored
Fix http://bugzilla.kernel.org/show_bug.cgi?id=5241 2.6.13 broke compilation of the xorg tree, which apprarently insists on including that file. Cc: Vojtech Pavlik <vojtech@suse.cz> Signed-off-by:
-
Zach Brown authored
Add smp_mb__after_clear_bit() to unlock_kiocb() AIO's use of wait_on_bit_lock()/wake_up_bit() forgot to add a barrier between clearing its lock bit and calling wake_up_bit() so wake_up_bit()'s unlocked waitqueue_active() can race. This puts AIO's use in line with the others and the comment above wake_up_bit(). Signed-off-by:
Zach Brown <zach.brown@oracle.com> Acked-by:
Benjamin LaHaise <bcrl@linux.intel.com> Signed-off-by:
-
Jean Delvare authored
Kill an unused member of the i2c_adapter structure. This additionally fixes a potential bug, because <linux/i2c.h> doesn't include <linux/config.h>, so different files including <linux/i2c.h> could see a different definition of the i2c_adapter structure, depending on them including <linux/config.h> (or other header files themselves including <linux/config.h>) before <linux/i2c.h>, or not. Credits go to Jörn Engel for pointing me to the problem. Signed-off-by:
Jean Delvare <khali@linux-fr.org> Cc: Greg KH <greg@kroah.com> Signed-off-by:
-
Robert Love authored
- Remove the relative input device - Add an absolute input device - Misc. cleanup and bug fixing The patch is sizable due to the cleanup from removing the relative input device (net -112 lines). Signed-off-by:
Robert Love <rml@novell.com> Cc: Dmitry Torokhov <dtor_core@ameritech.net> Cc: Greg KH <greg@kroah.com> Signed-off-by:
-
Davide Libenzi authored
Al found a potential problem in epoll_create(), where the file->private_data member was set after fd_install(). This is obviously wrong since another thread might do a close() on that fd# before we set the file->private_data member. This goes over 2.6.13 and passes a few basic tests I've done here. (akpm: snuck in a kzalloc() cleanup too) Signed-off-by:
Davide Libenzi <davidel@xmailserver.org> Signed-off-by:
-
Andrew Morton authored
Whitespace standardisation. Cc: Abhay Salunke <Abhay_Salunke@dell.com> Signed-off-by:
-
Abhay Salunke authored
BUG fixes: The driver used to allocate memory with spinlock held which has been fixed in this patch. The driver was printing the entire buffer when it received a invalid entry in image_type. The fix is to only print a warning message and not the buffer. Usability enhancements: It is possible that due to user error the /sys/class/firmware/dell_rbu entries might be missing, this can happen if the user does the following echo 1 > /sys/class/firmware/dell_rbu/loading echo 0 > /sys/class/firmware/dell_rbu/loading This will make the entries in /sys/class/firmware/ to disappear and the only way get them back was bby unloading and loading the driver. This patch makes the user recreate these entries by echoing init in to image_type. This patch has been tested with Libsmbios and Dell OpenManage. Signed-off-by:
Abhay Salunke <Abhay_Salunke@dell.com> Signed-off-by:
-
Jeff Dike authored
Using native cmpxchg offers a slight performance improvement in uml/i386. Signed-off-by:
Jeff Dike <jdike@addtoit.com> Signed-off-by:
-
Michael Kerrisk authored
2.6.13 incorporated Alan Cox's patch for /proc/sys/fs/suid_dumpable (one version of this patch can be found here http://marc.theaimsgroup.com/?l=linux-kernel&m=109647550421014&w=2 ). This patch also made corresponding changes in kernel/sys.c to change the prctl() PR_SET_DUMPABLE operation so that the permitted range of 'arg2' was modified from 0..1 to 0..2. However, a corresponding change was not made for PR_GET_DUMPABLE: if the dumpable flag is non-zero, then PR_GET_DUMPABLE always returns 1, so that the caller can't determine the true setting of this flag. Acked-by:
Alan Cox <alan@redhat.com> Signed-off-by:
-
Marcelo Tosatti authored
Small typo in relayfs documentation. Signed-off-by:
-
Vitaly Bordug authored
Added ppc_sys device and system definitions for PowerQUICC I devices. This will allow drivers for PQI to be proper platform device drivers. Currently sys section contains only MPC885 and MPC866. Identification should be done with identify_ppc_sys_by_name call, with board-specific "name" string passed, since PQI do not have any register that could identify the SOC. Signed-off-by:
Vitaly Bordug <vbordug@ru.mvista.com> Signed-off-by:
Kumar Gala <kumar.gala@freescale.com> Signed-off-by:
Marcelo Tosatti <marcelo.tosatti@cyclades.com> Signed-off-by:
-
Thomas Maguin authored
Add WRITE_LONG_2 as write safe commands, which which allows normal users to make a c1-, c2- and cu-scan (so called cxscan) with readcd on cxscan-capable cd/dvd-writers Signed-off-by:
-
Anton Blanchard authored
I forgot to include siginfo.h when I added data breakpoint support. We must include it in a round-a-bout way in mainline. Signed-off-by:
Anton Blanchard <anton@samba.org> Signed-off-by:
-
Serge Hallyn authored
That should be -EINVAL for both. Signed-off-by:
Serge Hallyn <serue@us.ibm.com> Cc: Greg KH <greg@kroah.com> Signed-off-by:
-
Andrew Morton authored
We don't put braces around single statements, thanks. Cc: Serge Hallyn <serue@us.ibm.com> Cc: James Morris <jmorris@namei.org> Cc: Chris Wright <chrisw@osdl.org> Cc: Greg KH <greg@kroah.com> Signed-off-by:
-
Andrew Morton authored
include/asm/desc.h: In function `load_LDT': include/asm/desc.h:209: warning: implicit declaration of function `get_cpu' include/asm/desc.h:211: warning: implicit declaration of function `put_cpu' Cc: Andi Kleen <ak@muc.de> Signed-off-by:
-
Dave Hansen authored
Signed-off-by:
Dave Hansen <haveblue@us.ibm.com> Signed-off-by:
-
Andrew Morton authored
For EXPORT_SYMBOL. Cc: Andi Kleen <ak@muc.de> Signed-off-by:
-
Richard Purdie authored
Fix up some pm_message_t types Signed-Off-By:
Richard Purdie <rpurdie@rpsys.net> Signed-off-by:
-
Jeff Dike authored
asm/elf.h is bad on x86_64, and i386 doesn't need it any more after Al's cleanup. Signed-off-by:
-
Jeff Dike authored
do_aio used to return -1 on error instead of errno. Signed-off-by:
-
Jeff Dike authored
The serial UML OS-abstraction layer patch (um/kernel dir). This joins mem_user.c and mem.c files. Signed-off-by:
Gennady Sharapov <Gennady.V.Sharapov@intel.com> Signed-off-by:
-
Jeff Dike authored
The serial UML OS-abstraction layer patch (um/kernel dir). This moves all system calls from mem_user.c and tempfile.c files under os-Linux dir. Signed-off-by:
-
Jeff Dike authored
The poster child for this patch is the third tuntap_user hunk. When an ioctl fails, it properly closes the opened file descriptor and returns. However, the close resets errno to 0, and the 'return errno' that follows returns 0 rather than the value that ioctl set. This caused the caller to believe that the device open succeeded and had opened file descriptor 0, which caused no end of interesting behavior. The rest of this patch is a pass through the UML sources looking for places where errno could be reset before being passed back out. A common culprit is printk, which could call write, being called before errno is returned. In some cases, where the code ends up being much smaller, I just deleted the printk. There was another case where a caller of run_helper looked at errno after a failure, rather than the return value of run_helper, which was the errno value that it wanted. Signed-off-by:
-
Jeff Dike authored
These ugly double-casts are the result of gdb complaining about size Signed-off-by:
-
Jeff Dike authored
linux/inet.h isn't needed, and on my system, is empty. Signed-off-by:
-
