Fix a issue to enable unsolicited response to line-out pins.

Signed-off-by: Lydia Wang <lydiawang@viatech.com.cn>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Use static inline for dummy function to fix the warnings like below
  sound/pci/hda/patch_sigmatel.c: In function ‘stac92xx_init’:
  sound/pci/hda/patch_sigmatel.c:4387:3: warning: statement with no effect
  sound/pci/hda/patch_sigmatel.c: In function ‘stac92xx_resume’:
  sound/pci/hda/patch_sigmatel.c:4927:3: warning: statement with no effect

Signed-off-by: Takashi Iwai <tiwai@suse.de>

to fix build problems when it is disabled.

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

More similar fixes like previous commits: handle the exceptional case
like ALC267 where no volume amp is found in ADC widget but in the
capsrc widget instead.

Also minor checks for avoiding possible erros: no connection-select
when the pin has a single selection, and add beep verbs only when the
0x1d is used for beep.

Signed-off-by: Takashi Iwai <tiwai@suse.de>

ALC259 seems to provide an invalid widget capability for the input-src
selector widget.  The widget shows the input-amp while it's a selector,
and this confuses the current ALC882 initialization code that is used
for ALC259, too.  For fixing this, check the amp capability and handle
the connection selection individually.

Also, ALC259 has no mute bit in DAC volume, so we need to initialize
it as ZERO instead of MUTE.

Signed-off-by: Takashi Iwai <tiwai@suse.de>

ALC269 and compatible codecs have the output volume in DACs, thus we
can't use the ALC880's code as is.  Fixed by checking the amp caps and
picking up the right widget for initialization.

Signed-off-by: Takashi Iwai <tiwai@suse.de>

Look through the known NIDs that may have EAPD capabilities and turn
on/off them appropriately instead of checking the individual vendor ids.

This will also avoid the forgotten entries of newly added codec ids
in future.

Signed-off-by: Takashi Iwai <tiwai@suse.de>

Fix the regression introduced by the commit
1f0f4b80


  ALSA: hda - Reduce static init verbs for Realtek auto-parsers

The input amps of mixer widgets should be unmuted as default (as
usually they have no assigned mixer switches).

More fixes in this commit are, however, for ALC260: ALC260 codec can
have multiple output mixers connnected to a single DAC althouh the
driver didn't pick up them properly.

Signed-off-by: Takashi Iwai <tiwai@suse.de>

Some Realtek codecs have the output pins hardwired with certain DACs.
These DACs have to be assigned at first and assign the rest for
multi-DAC pins so that all DACs can be assigned properly.

Without such an optimization, speaker outputs may be assigned to the
same DAC as the headphone or others.

Signed-off-by: Takashi Iwai <tiwai@suse.de>

In alc_auto_add_multi_channel_mode(), when the primary HP workaround
is enabled, it re-initializes the DAC list but calls alc662's function
in a fixed way.  This isn't pretty suitable for other codecs, of course.

Now we call it with fill_dac function pointer so that the proper
function can be called at that point.

Signed-off-by: Takashi Iwai <tiwai@suse.de>

Instead of using fixed init verbs, initialize DACs, ADCs and mixers
more dynamically for Realtek auto-parsers.

Signed-off-by: Takashi Iwai <tiwai@suse.de>

Add a new helper function snd_hda_get_conn_list().
Unlike snd_hda_get_connections(), this function doesn't copy the
connection-list but gives the raw pointer for the cached list.

Signed-off-by: Takashi Iwai <tiwai@suse.de>

Signed-off-by: Takashi Iwai <tiwai@suse.de>

Change alc_get_line_out_pfx() in patch_realtek.c to provide the channel
specific name and assign the index so that each caller doesn't have to
set the channel name by itself.

Also, check the multi-io case with the primary hp-out; for the multi-io
channels, assign the channel name instead of "Headphone" with indices.
This makes the mixer names more intuitive and reduces confusion.

Signed-off-by: Takashi Iwai <tiwai@suse.de>

Some BIOS set up the pin config wrongly as line-out although it's
supposed to be a speaker out.  In most cases, though, we can judge
the validity by checking the connection type -- when it's FIXED,
mostly it's an invalid line-out but a speaker.

Signed-off-by: Takashi Iwai <tiwai@suse.de>

Even if the machine has no line-out but only HP-out, try to detect the
multi-io.  It'll allow more possibilities for 5.1 outputs on laptops.

Signed-off-by: Takashi Iwai <tiwai@suse.de>

BIOS lists the internal speaker as an internal line-out. Change to
internal speaker + model=auto for better auto-mute capabilities.

BugLink: http://bugs.launchpad.net/bugs/754964


Reported-by: Marc Legris <marc.legris@canonical.com>
Signed-off-by: David Henningsson <david.henningsson@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Some VIA codecs like VT1702 provide the input-route only to specific
ADCs such as digital-mic inputs.  These routes aren't covered by the
normal primary ADC, and for now, user had to open the capture stream
assigned to that special ADC manually for using such inputs.

This patch implements a way to switch the current ADC dynamically per
the input-source selection in such a case.  When this workaround is
activated, the driver provides only one capture stream and one input-
source control but with the full possible inputs.  The driver switches
the ADC to be used (or being used) according to the input-source on the
fly.

Signed-off-by: Takashi Iwai <tiwai@suse.de>

When smart51 mode is enabled, auto-mute these surround outputs
as well as the primary line-out.  Also this patch includes minor
clean-ups.

Signed-off-by: Takashi Iwai <tiwai@suse.de>

Unify the VT1709 10ch and 6ch parsers, as well as VT1708B 8ch and 4ch
parsers.  They have no difference now.

Signed-off-by: Takashi Iwai <tiwai@suse.de>

The codecs like VT1708 needs more complicated routing using the mixer
widget rather than the simple selector widgets.

Signed-off-by: Takashi Iwai <tiwai@suse.de>

The surround/CLFE/side DACs on VT1708B and co have no amp but the
connected selector widgets have the amp instead.  Fix the parser to
check these selector widgets for the possible mixer controls as well.

Signed-off-by: Takashi Iwai <tiwai@suse.de>

Fix the check of the multiple loopback-mixer, which gave sometimes
a wrong index assigned to an element even for different names, e.g.
Mic and Front Mic.  Now check the label properly for avoid duplication.

Reported-by: David Henningsson <david.henningsson@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

The input jacks assigned as the smart51 outputs must be in the same
stack, either rear, front or other.  Also, prefer line-in as the surround
to mic-in.

Signed-off-by: Takashi Iwai <tiwai@suse.de>

Re-route the whole output path when HP-independent mode is changed.

Signed-off-by: Takashi Iwai <tiwai@suse.de>

Fix a issue to create playback volume control if pin has amplifier capability
but not DAC.

Signed-off-by: Lydia Wang <lydiawang@viatech.com.cn>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Change the order of the output-path list in a way from the DAC to the
target pin.  Also now the list include the target pin, too.

Together with this format change, simplify the arguments of
parse_output_path() function, and fix the initialization in
via_auto_init_output().

Signed-off-by: Takashi Iwai <tiwai@suse.de>

Drop "Capture" prefix from the mic-boost names.
Otherwise some control names can overflow the max name length.

Signed-off-by: Takashi Iwai <tiwai@suse.de>

Signed-off-by: Takashi Iwai <tiwai@suse.de>

Conflicts:
	sound/pci/hda/patch_via.c

Create patch_ca0132.c, to add support for devices featuring the
Creative CA0132 HD-audio codec.

This driver implements :-
* 1 playback subdevice to headphone and speaker
* 2 capture subdevices:
   i - Mic-in
   ii- Line-in
* mixer device

Advanced DSP features are not yet included.
Developed and maintained by Creative Labs, Inc.

Signed-off-by: Ian Minett <ian_minett@creativelabs.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Create a master volume and mute control of playback for VT1718S.

Signed-off-by: Lydia Wang <lydiawang@viatech.com.cn>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

When switch HP independent mode, mute/unmute connctions of mixer  which is
connected to headphone for VT1718S.

Signed-off-by: Lydia Wang <lydiawang@viatech.com.cn>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Remove some invalid initial verbs and correct some wrong initial verbs
for VT1718S codec.

Signed-off-by: Lydia Wang <lydiawang@viatech.com.cn>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

The "diverse" Quanta ID 0x0763 is overridden to ALC268_ACER.
This keeps headphone automute and microphone input from operating
on at least one laptop from Opti Systems.
Without the override, the BIOS parser does a fine job setting the
card up and everything works.

Tested-By: Peter Schneider <e.at.chi.kaen@googlemail.com>
Signed-off-by: Tony Vroon <tony@linx.net>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

The reporter, who is running kernel 2.6.38, reports that
he needs to set model=auto for the headphone output to work
correctly.

BugLink: http://bugs.launchpad.net/bugs/761022


Cc: stable@kernel.org (v2.6.38+)
Reported-by: Jo
Signed-off-by: David Henningsson <david.henningsson@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Use the existing aa-loop list for simplifying the check for analog
low-current mode.  Also fix the stream count test for playback streams.

Signed-off-by: Takashi Iwai <tiwai@suse.de>

There is no longer virtual kmixer element for NID mapping.

Signed-off-by: Takashi Iwai <tiwai@suse.de>