- Jun 02, 2007
-
-
Milton Miller authored
Commit 9da82a6d inadvertently removed the platform override for zImage.coff to be generated with pmaccoff. Rather than add a special makefile rule, change the platform for which the wrapper platform uses the special rules. Signed-off-by:
Milton Miller <miltonm@bga.com> Signed-off-by:
Paul Mackerras <paulus@samba.org>
-
Stefan Roese authored
The IBM/AMCC 405 platforms don't compile anymore in the current kernel version. This fixes the compile breakage. Signed-off-by:
Stefan Roese <sr@denx.de> Signed-off-by:
-
Johannes Berg authored
In b3028878 I switched the apm emulation code to use the generic code but accidentally dropped the PPC32 dependency from the configuration symbol. This adds it back. Signed-off-by:
Johannes Berg <johannes@sipsolutions.net> Signed-off-by:
-
Michael Ellerman authored
There is a thinko in the irq code, it uses IRQ_NONE to indicate no irq, whereas it should be using NO_IRQ. IRQ_NONE is returned from irq handlers to say "not handled". As it happens they currently have the same value (0), so this is just for future proof-ness. Signed-off-by:
Michael Ellerman <michael@ellerman.id.au> Acked-by:
Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by:
-
Akinobu Mita authored
pte_alloc_one() is expected to return NULL if out of memory. But it returns virt_to_page(NULL), which is not NULL. This fixes it. Cc: Paul Mackerras <paulus@samba.org> Signed-off-by:
Akinobu Mita <mita@fixstars.com> Signed-off-by:
-
Michael Neuling authored
In 616883df request_irq was marked as __must_check so we must... er... check it. Signed-off-by:
Michael Neuling <mikey@neuling.org> Signed-off-by:
-
David Gibson authored
In the bootwrapper code for powerpc, we include HOSTCFLAGS into the BOOTCFLAGS used for building the zImage wrapper code. Since the wrapper code is not host code, this makes no sense. This patch removes the use of HOSTCFLAGS here, instead including directly into BOOTCFLAGS those flags from the normal kernel CFLAGS which also make sense in the bootwrapper code. In particular, this makes the bootwrapper use -msoft-float, preventing the compiler from generating floating point instructions. Previously, under some circumstances the compiler could generate floating point instructions in the bootwrapper which would cause exceptions on embedded CPUS which don't have floating point support. Signed-off-by:
David Gibson <david@gibson.dropbear.id.au> Acked-by:
Josh Boyer <jwboyer@linux.vnet.ibm.com> Signed-off-by:
-
Stephen Rothwell authored
This zImage is really just the stripped vmlinux, but it means that there is one less special case for iSeries and also that the zImages will be built for a combined kernel build that happens to include iSeries. This zImage boots fine on legacy iSeries. Signed-off-by:
Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by:
-
Stephen Rothwell authored
and so needs to include asm/smp.h so a UP build works. Signed-off-by:
Olof Johansson <olof@lixom.net> Signed-off-by:
-
Stephen Rothwell authored
and so needs to include asm/smp.h for a UP build to work. Signed-off-by:
Geoff Levand <geoffrey.levand@am.sony.com> Signed-off-by:
-
Benjamin Herrenschmidt authored
I think we have a subtle race on ppc64 with the tlb batching. The common code expects tlb_flush() to actually flush any pending TLB batch. It does that because it delays all page freeing until after tlb_flush() is called, in order to ensure no stale reference to those pages exist in any TLB, thus causing potential access to the freed pages. However, our tlb_flush only triggers the RCU for freeing page table pages, it does not currently trigger a flush of a pending TLB/hash batch, which is, I think, an error. This fixes it. Signed-off-by:
-
David Gibson authored
The recent addition of assembler flags for 44x.c and ebony.c in the bootwrapper to make them compile on certain toolchains was not correct and could break other platforms. This patch switches to using a compiler flag instead, which implies the appropriate assembler flag, and also stops the compiler itself generating instructions which are invalid for the platform in question. Signed-off-by:
Segher Boessenkool <segher@kernel.crashing.org> Signed-off-by:
-
Benjamin Herrenschmidt authored
The ppc32 kernel didn't properly set/clear the TIF_SINGLESTEP flag, causing return from syscalls to not SIGTRAP, thus executing one more instruction before stopping again. This fixes it. The ptrace code is a bit of a mess, and is overdue for at least a -proper- 32/64 bits split and possibly more cleanups but this minimum fix should be ok for 2.6.22 Signed-off-by:
-
Michael Ellerman authored
The documentation for of_find_node_by_type() incorrectly refers to the "name" parameter - it should be "type". Also the behaviour when from == NULL is not really documented, fix that. Signed-off-by:
-
- Jun 01, 2007
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6Linus Torvalds authored
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6: firewire: Install firewire-constants.h and firewire-cdev.h for userspace. firewire: Change struct fw_cdev_iso_packet to not use bitfields. firewire: Implement suspend/resume PCI driver hooks. firewire: add to MAINTAINERS firewire: fw-sbp2: implement sysfs ieee1394_id ieee1394: sbp2: offer SAM-conforming target port ID in sysfs ieee1394: fix calculation of sysfs attribute "address"
-
Ingo Molnar authored
Make timer-stats have almost zero overhead when enabled in the config but not used. (this way distros can enable it more easily) Also update the documentation about overhead of timer_stats - it was written for the first version which had a global lock and a linear list walk based lookup ;-) Signed-off-by:
Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Bjorn Steinbrink authored
Fix two races in the timer stats lookup code. One by ensuring that the initialization of a new entry is finished upon insertion of that entry. The other by cleaning up the hash table when the entries array is cleared, so that we don't have any "pre-inserted" entries. Thanks to Eric Dumazet for reminding me of the memory barriers. Signed-off-by:
Bjorn Steinbrink <B.Steinbrink@gmx.de> Signed-off-by:
Ian Kumlien <pomac@vapor.com> Acked-by:
-
Sam Ravnborg authored
Fix following section mismatch warning in hp100: WARNING: drivers/net/hp100.o(.init.text+0x26a): Section mismatch: reference to .exit.text: (after 'init_module') The warning says that we use a function marked __exit from a function marked __init. This is not good on architectures where we discard __exit section for drivers that are built-in. Note: This warning is only seen by my local copy of modpost but the change will soon hit upstream. Signed-off-by:Sam Ravnborg <sam@ravnborg.org> Acked-by:
Jeff Garzik <jeff@garzik.org> Signed-off-by:
-
Sam Ravnborg authored
Fix following section mismatch warning in kvm-intel.o: WARNING: o-i386/drivers/kvm/kvm-intel.o(.init.text+0xbd): Section mismatch: reference to .exit.text: (between 'hardware_setup' and 'vmx_disabled_by_bios') The function free_kvm_area is used in the function alloc_kvm_area which is marked __init. The __exit area is discarded by some archs during link-time if a module is built-in resulting in an oops. Note: This warning is only seen by my local copy of modpost but the change will soon hit upstream. Signed-off-by: -
Sam Ravnborg authored
Fix following section mismatch warnings in acpi WARNING: drivers/acpi/asus_acpi.o(.init.text+0xb7): Section mismatch: reference to .exit.text: (after 'init_module') WARNING: o-i386/drivers/acpi/toshiba_acpi.o(.init.text+0x13a): Section mismatch: reference to .exit.text: (after 'init_module') The exit function is used in the init function during an error codition. As __exit may be discarded during link-time / run-time this is no good. Do not mark the exit function __exit. Note: This warning is only seen by my local copy of modpost but the change will soon hit upstream. Signed-off-by: -
Sam Ravnborg authored
Fix the following section mismatch warnings: WARNING: drivers/isdn/hardware/eicon/divadidd.o(.init.text+0xc4): Section mismatch: reference to .exit.text: (between 'init_module' and 'diddfunc_init') WARNING: drivers/isdn/hardware/eicon/divas.o(.init.text+0xf4): Section mismatch: reference to .exit.text:divasfunc_exit (between 'init_module' and 'divasfunc_init') WARNING: drivers/isdn/hardware/eicon/divas.o(.init.text+0x10d): Section mismatch: reference to .exit.text:divasfunc_exit (between 'init_module' and 'divasfunc_init') WARNING: drivers/isdn/hardware/eicon/divas.o(.init.text+0x148): Section mismatch: reference to .exit.text:divasfunc_exit (between 'init_module' and 'divasfunc_init') They all point to situation whare a function marked __init calls a function marked __exit - but the __exit section may have been discarded. Note: This warning is generated by a modified copy of modpost in my tree. It will soon hit upstearm. Signed-off-by: -
Sam Ravnborg authored
Fix the following section mismatch warnings in microcode.c: WARNING: arch/i386/kernel/built-in.o(.init.text+0x3966): Section mismatch: reference to .exit.text: (between 'microcode_init' and 'parse_maxcpus') WARNING: arch/i386/kernel/built-in.o(.init.text+0x3992): Section mismatch: reference to .exit.text: (between 'microcode_init' and 'parse_maxcpus') The warning are caused by a function marked __init that calls a function marked __exit. Functions marked __exit may be discarded either during link or run-time and thus the reference is not good. Signed-off-by:
-
Krzysztof Helt authored
This patch correctly restores console state after switching from X. Otherwise, screen is always off after switching from X. Signed-off-by:
Krzysztof Helt <krzysztof.h1@wp.pl> Signed-off-by:
Antonino Daplas <adaplas@gmail.com> Signed-off-by:
-
Christoph Lameter authored
Hotplug callbacks are performed with interrupts enabled. Slub requires interrupts to be disabled for flushing caches. Signed-off-by:
Christoph Lameter <clameter@sgi.com> Cc: Michal Piotrowski <michal.k.k.piotrowski@gmail.com> Signed-off-by:
-
Andrea Paterniani authored
Fix 2 bugs: - SPI_DMA_RHDMA bad value. - Missing return value in setup() function (lost passing from patch-2.6.20-rc4-spi_imx to patch-2.6.20-rc6-spi_imx). Signed-off-by:
Andrea Paterniani <a.paterniani@swapp-eng.it> Cc: David Brownell <david-b@pacbell.net> Signed-off-by:
-
Maciej W. Rozycki authored
The <linux/serial_core.h> header refers to handle_sysrq(), but does not include <linux/sysrq.h> which provides a declaration of the function. This may result in an implicit declaration and a warning if the actual one is seen later on. Signed-off-by:
Maciej W. Rozycki <macro@linux-mips.org> Cc: Russell King <rmk@arm.linux.org.uk> Signed-off-by:
-
Satoru Takeuchi authored
Add comment for errnos related to restart syscall to avoid the leakage of them to user programs. Signed-off-by:
Satoru Takeuchi <takeuchi_satoru@jp.fujitsu.com> Cc: Oleg Nesterov <oleg@tv-sign.ru> Acked-by:
Roland McGrath <roland@redhat.com> Signed-off-by:
-
Jay Estabrook authored
1. arch/alpha/Kconfig several adjustments: a) additions to the systems list and cleanup of same b) change limits of NR_CPUS and make dep. on platform Note that MARVEL support is limited to 32 CPUs whan using 42-bit KSEG - one needs 48-bit KSEG to handle up to 64, and we've never supported 48-bit KSEG. 2. include/asm-alpha/core_wildfire.h fix a typo that undoubtedly prevents WILDFIRE support from working Signed-off-by:Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: Richard Henderson <rth@twiddle.net> Signed-off-by:
-
Jay Estabrook authored
This code corrects the behavior of the t2_readX/t2_writeX routines, and t2_ioreadNN/t2_iowriteNN routines. The value T2_DENSE_MEM is now subtracted from the "xaddr" argument in each of the readX/writeX routines, since those routines may be called directly, rather than always through the ioreadNN/iowriteNN routines. Examples of the direct calls, via the __raw_readX/writeX macros, are the memcpy_fromio/toio, _memset_c_io, and scr_memcpyw routines. Signed-off-by:
Jay Estabrook <jay.estabrook@hp.com> Signed-off-by:
-
Jay Estabrook authored
This code replaces earlier and incomplete handling of graphics on non-zero PCI domains (aka hoses or peer PCI buses). An option (CONFIG_VGA_HOSE) is set TRUE if configuring a GENERIC kernel, or a kernel for MARVEL, TITAN, or TSUNAMI machines, as these are the machines whose SRM consoles are capable of configuring and handling graphics options on non-zero hoses. All other machines have the option set FALSE. A routine, "find_console_vga_hose()", is used to find the graphics device which the machine's firmware believes is the console device, and it sets a global (pci_vga_hose) for later use in managing access to the device. This is called in "init_arch" on TITAN and TSUNAMI machines; MARVEL machines use a custom version of this routine because of extra complexity. A routine, "locate_and_init_vga()", is used to find the graphics device and set a global (pci_vga_hose) for later use in managing access to the device, in the case where "find_console_vga_hose" has failed. Various adjustments are made to the ioremap and ioportmap routines for detecting and translating "legacy" VGA register and memory references to the real PCI domain. [akpm@linux-foundation.org: don't statically init bss] [akpm@linux-foundation.org: build fix] Signed-off-by:
-
Yoshinori Sato authored
- warning fix. - call trace area check fix. - There is no meaning, ' & ' it deletes Signed-off-by:
Yoshinori Sato <ysato@users.sourceforge.jp> Signed-off-by:
-
Haavard Skinnemoen authored
When either rx_buf or tx_buf is not being used, i.e. for plain read- or write operations, the atmel_spi uses a fixed-size DMA buffer instead. If the transfer is longer than the size of this buffer, it is split into multiple DMA transfers. When the transfer is split like this, the atmel_spi driver ends up using the same DMA address again and again even for the buffer that came from the user, which is of course wrong. Fix this by adding the number of bytes already transferred to the DMA address so that the data ends up in the right place. Thanks to Wu Xuan for discovering this bug. Signed-off-by:
Haavard Skinnemoen <hskinnemoen@atmel.com> Signed-off-by:
David Brownell <dbrownell@users.sourceforge.net> Signed-off-by:
-
Luis R. Rodriguez authored
Cc: "John W. Linville" <linville@tuxdriver.com> Signed-off-by:
-
Karsten Keil authored
I noticed that CLIR (aka "hide your calling number") in isdn_tty is broken: The at-command parser filters out the required "R" (e.g. ATDR089123456) It's been broken for a *very* long time. Signed-off-by:
Karsten Keil <kkeil@suse.de> Signed-off-by:
Matthias Goebl <matthias.goebl@goebl.net> Signed-off-by:
-
Tilman Schmidt authored
According to the definitions recently posted on LKML, the maturity label for the ISDN4Linux subsystem is wrong. This patch corrects it and also clarifies the accompanying help text a bit. Signed-off-by:
Tilman Schmidt <tilman@imap.cc> Acked-by:
-
Oleg Nesterov authored
Spotted by Satoru Takeuchi. kill_pgrp(task_pgrp(current)) sends the signal to the current's thread group, but can choose any sub-thread as a target for signal_wake_up(). This means that job_control() and tty_check_change() may return -ERESTARTSYS without signal_pending(). Signed-off-by:
Oleg Nesterov <oleg@tv-sign.ru> Cc: Satoru Takeuchi <takeuchi_satoru@jp.fujitsu.com> Cc: Roland McGrath <roland@redhat.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: <stable@kernel.org> Signed-off-by:
-
Yasunori Goto authored
zone->present_pages is updated in online_pages(). But, __add_zone() can be called twice or more before calling online_pages(). So, init_currenty_empty_zone() can be called unnecessary times. It is cause of memory leak of zone's wait_table. Signed-off-by:
Yasunori Goto <y-goto@jp.fujitsu.com> Signed-off-by:
-
Matthew Garrett authored
Intel Macs (and possibly other machines) provide a PNP entry for the RTC, but provide no IRQ. As a result the rtc-cmos driver doesn't allow wakeup alarms. If the RTC is located at the legacy ioport range, assume that it's on IRQ 8 unless the tables say otherwise. Signed-off-by:
Matthew Garrett <mjg59@srcf.ucam.org> Cc: Matthieu CASTET <castet.matthieu@free.fr> Signed-off-by:
-
Pekka Enberg authored
Adds instructions how to use GDB to figure out the exact location of an OOPS to Documentation/BUG-HUNTING. Signed-off-by:
Pekka Enberg <penberg@cs.helsinki.fi> Signed-off-by:
-
Andy Whitcroft authored
We are seeing increasing levels of minor patch style violations in submissions to the mailing lists as well as making it into the tree. These detract from the quality of the submission and cause unnessary work for reviewers. As a first step package up the current state of the patch style checker and include it in the kernel tree. Add instructions suggesting running it on submissions. This adds version v0.01 of the checkpatch.pl script. Signed-off-by:
Andy Whitcroft <apw@shadowen.org> Signed-off-by:
Joel Schopp <jschopp@austin.ibm.com> Cc: Randy Dunlap <rdunlap@xenotime.net> Cc: Dave Jones <davej@codemonkey.org.uk> Signed-off-by:
-
