Finally get rid of dwc3_trace() hack. If any other
message is truly needed, we should add proper
tracepoints for them instead of hacking around with
dwc3_trace() or similar.

Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>

instead of using a simple trace_printk() wrapper,
let's add an actual tracepoint and print further
details about the endpoint being operated upon.

Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>

Intel's BXT devices need to execute a _DSM method
during {runtime_,}{suspend,resume} in order to get a
chunk of dwc3 to power gate and save some extra
power.

Let's do that now.

Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>

We'll be tracking a little more information for PCI
drivers, it's about time we add a private structure
for that.

Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>

When we get a half-way processed request, we should
make sure to try to prepare further TRBs for it or
for any possibly queued up request held in our
pending_list. This will make sure our controller is
kept busy for as long as possible.

Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>

Say we have three requests prepared to the HW (reqA,
reqB, and reqC). All of them are composed of
SG-lists with several entries and they all requests
interrupt only on last TRBs of the SG-list.

When we get interrupt for reqA, it could be that
reqB is already half-way transferred and some of its
TRBs will have HWO already cleared.

It's okay to free up TRBs without HWO bit set, but
we need to guarantee we don't giveback a request
that's half-way transferred as that will confuse
gadget drivers.

Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>

In cases where we're given an SG-list which is
longer than the amount of currently available TRBs,
we will be left with the same request on
started_list and we should prioritize that request
over possible new requests on pending_list. That's
a way to guarantee requests complete in order.

Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>

This will give us a simpler way of figuring out how
many bytes were left in each TRB. It's useful for
cases where we queue only part of an SG-list due to
amount of available TRBs at the time of kicking the
transfer.

Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>

If XferNotReady comes before usb_ep_queue() we will
set our PENDING request flag and wait for a
request. However, originally, we were assuming
usb_ep_queue() would always happen before our first
XferNotReady and that causes a corner case where we
could try to issue ENDTRANSFER command before
STARTTRANSFER.

Let's fix that by tracking endpoints which have been
started.

Reported-by: Janusz Dziedzic <januszx.dziedzic@intel.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>

Instead of just delaying for 100us, we should
actually wait for End Transfer Command Complete
interrupt before moving on. Note that this should
only be done if we're dealing with one of the core
revisions that actually require the interrupt before
moving on.

[ felipe.balbi@linux.intel.com: minor improvements ]

Signed-off-by: Baolin Wang <baolin.wang@linaro.org>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>

dev_kfree_skb_any() is used to free packets that are dropped by the
network stack. Therefore the function should not be used for packets
that have been successfully processed by the network stack. Instead
dev_consume_skb_any() has to be used for such consumed packets.

This separation helps to identify dropped packets.

Signed-off-by: Torsten Polle <tpolle@de.adit-jv.com>
Signed-off-by: Harish Jenny K N <harish_kandiga@mentor.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>

Socket buffers should be linked to the (network) device that allocated
the buffers. __netdev_alloc_skb performs this task.

Signed-off-by: Torsten Polle <tpolle@de.adit-jv.com>
Signed-off-by: Jim Baxter <jim_baxter@mentor.com>
Signed-off-by: Harish Jenny K N <harish_kandiga@mentor.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>

Socket buffers should be linked to the (network) device that allocated
the buffers.

Signed-off-by: Torsten Polle <tpolle@de.adit-jv.com>
Signed-off-by: Harish Jenny K N <harish_kandiga@mentor.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>

There is only one waiter for the completion, therefore there
is no need to use complete_all(). Let's make that clear by
using complete() instead of complete_all().

The usage pattern of the completion is:

waiter context                          waker context
  reinit_completion()
  usb_esp_queue()
  wait_for_completion_interruptible()

					ffs_ep0_complete()
					  complete()

Acked-by: Michal Nazarewicz <mina86@mina86.com>
Signed-off-by: Daniel Wagner <daniel.wagner@bmw-carit.de>
Cc: Felipe Balbi <balbi@kernel.org>
Cc: Michal Nazarewicz <mina86@mina86.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: linux-usb@vger.kernel.org
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>

The combo of list_empty() check and return list_first_entry()
can be replaced with list_first_entry_or_null().

Acked-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>

The combo of list_empty() check and return list_first_entry()
can be replaced with list_first_entry_or_null().

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>

The combo of list_empty() check and return list_first_entry()
can be replaced with list_first_entry_or_null().

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: John Youn <johnyoun@synopsys.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>

Use the more common logging mechanism.

Miscellanea:

o Realign multiline statements
o Coalesce format

Acked-by: Robert Jarzmik <robert.jarzmik@free.fr>
Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>

Let's not reimplement generic kernel helpers,
instead call kasprintf().

[ felipe.balbi@linux.intel.com: better commit log ]

Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>

When we change the USB function with configfs dynamically, we possibly
met this situation: one core is doing the control transfer, another core
is trying to unregister the USB gadget from userspace, we must wait for
completing this control tranfer, or it will hang the controller to set
the DEVCTRLHLT flag.

[ felipe.balbi@linux.intel.com: several fixes to the patch
	- call complete() before starting following SETUP transfer
	- add a macro for ep0_in_setup's timeout
	- change commit subject slightly
	- break lines at 72 characters (git adds an 8-character tab)
	- avoid changes to dwc3_gadget_run_stop() ]

Signed-off-by: Baolin Wang <baolin.wang@linaro.org>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>

That function is unnecessarily called from
dwc3_gadget_reset_interrupt(). Gadget drivers (and
thus, functions) are required to dequeue all pending
requests when they get notified about a USB Bus
Reset.

Trying to make sure there are no pending requests
only serves the purpose of working around possibly
bad gadgets.

Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>

This helper will be responsible for reading and
parsing our properties. No functional changes in
this patch, cleanup only.

Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>

Kernel will give us page aligned memory anyway.

Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>

This little helper will be used to setup anything
related to GCTL register. There are no functional
changes, this is a cleanup only patch.

Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>

This little helper will be used to make sure we're
dealing with a valid Synopsys DWC3 or DWC3.1 core.

Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>

For the usb31 IP and from version 2.90a of the usb3 IP, the core
supports HW exit from L1 in HS. Enable it, otherwise the controller may
never exit from LPM to do a transfer.

Signed-off-by: John Youn <johnyoun@synopsys.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>

Member @mem in struct dwc3 is not used in any places. Clean up it.

Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>

We should never kill the machine just because some
USB endpoint type is wrong. WARN about it and move
on.

Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>

We don't need to know about short packets unless
gadget driver told us it's not ok to see them on the
bus. In the normal situation we can continue
processing the list of requests if we get a Short
packet.

Also, note that we're making sure ISP is only set
for OUT endpoints, where that setting is valid.

Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>

CSP bit is only valid for OUT endpoints. Synopsys
databook is unclear if HW ignores CSP for IN
endpoints (chances are, it does) but to avoid
problems, let's make sure to set CSP only when valid
to do so.

Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>

Recent changes have turned this field obsolete. Remove it.

Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>

By extracting smaller functions from
dwc3_ep0_handle_feature(), it becomes far easier to
understand what's going on. Cleanup only, no
functional changes.

Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>

Cleanup only, no functional changes.

Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>

Cleanup only, no functional changes.

Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>

We want to reduce the usage of dwc3_trace() in favor
of proper tracepoints which can be enabled/disabled
by the user. Let's start with our register
accessors.

Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>

We shouldn't have any glue layer which doesn't
compile everywhere. In order to make sure this is
always the case, make sure COMPILE_TEST is properly
added at dependency list of a config entry.

Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>

We don't need dwc3_trace() unless we're building a
kernel with CONFIG_FTRACE. This patch reduces
dwc3.ko text size a bit while also removing overhead
of dwc3_trace() calls.

   text    data     bss     dec     hex filename
  50796     581       0   51377    c8b1 drivers/usb/dwc3/dwc3.o
  43961     581       0   44542    adfe drivers/usb/dwc3/dwc3.o.patched

Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>

We can offset the latency of a full Start Transfer
command - where we _must_ poll for its completion -
to usb_ep_enable() time. This means that once
requests start showing up from the gadget driver, we
can rely on No Response Update Transfer command -
where we don't need to poll for completion.

This patch, starts implementing this method for Bulk
endpoints, even though, technically, we could extend
it to all other endpoints in future commits.

Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>

In case of periodic transfers, let's pretty print
the size field as a multiplier followed by length,
such as :

	3x 1024

instead of:

	33555456

Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>

Now that usb_endpoint_maxp() only returns the lowest
11 bits from wMaxPacketSize, we can remove the &
operation from this driver.

Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>