Use parent_hws for two remaining clocks in gcc-msm8994 that used
parent_names.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220620080505.1573948-1-dmitry.baryshkov@linaro.org

Convert clk-rpm driver to parent_data API.
We keep the old pxo/cxo_board parent naming to keep compatibility with
old DT and we use the new pxo/cxo for new implementation where these
clock are defined in DTS.

Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220706225321.26215-4-ansuelsmth@gmail.com

qcom,rpmcc describe 2 different kind of device.
Currently we have definition for rpm-smd based device but we lack
Documentation for simple rpm based device.

Add the missing clk for ipq806x, apq8060, msm8660 and apq8064 and
provide additional example to describe these new simple rpm based
devices.

Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220706225321.26215-2-ansuelsmth@gmail.com

The shipped qcom driver defines:
static struct clk_freq_tbl ftbl_gcc_usb_hs_system_clk[] = {
        F(  57140000,      gpll0_out_main,  14,    0,    0),
        F(  80000000,      gpll0_out_main,  10,   0,    0),
        F( 100000000,      gpll0_out_main,   8,   0,    0),
        F_END
};
In the upstream code we omit 57.14 MHz and 100 MHz.

Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220712125922.3461675-7-bryan.odonoghue@linaro.org

Again the msm8936/msm8939 supports a wider range of operating frequencies
to the antecedent msm8916 from which the msm8939.c driver is derived.

static struct clk_freq_tbl ftbl_gcc_mdss_mdp_clk[] = {
        F(  50000000,      gpll0_out_aux,  16,    0,    0),
        F(  80000000,      gpll0_out_aux,  10,    0,    0),
        F( 100000000,      gpll0_out_aux,   8,    0,    0),
        F( 145500000,      gpll0_out_aux,  5.5,   0,    0),
        F( 153600000,      gpll1_out_main,      4,      0,      0),
        F( 160000000,      gpll0_out_aux,   5,    0,    0),
        F( 177780000,      gpll0_out_aux, 4.5,    0,    0),
        F( 200000000,      gpll0_out_aux,   4,    0,    0),
        F( 266670000,      gpll0_out_aux,   3,    0,    0),
        F( 307200000,      gpll1_out_main,      2,      0,      0),
        F( 366670000,      gpll3_out_aux,   3,        0,    0),
        F_END
};

We are missing 145.5 MHz and 153.6 MHz.

Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220712125922.3461675-6-bryan.odonoghue@linaro.org

Reviewing the qcom msm8936.c clock frequency tables we see

static struct clk_freq_tbl ftbl_gcc_camss_cpp_clk[] = {
        F( 160000000,      gpll0_out_main,   5,   0,    0),
        F( 200000000,      gpll0_out_main,   4,   0,    0),
        F( 228570000,      gpll0_out_main, 3.5,   0,    0),
        F( 266670000,      gpll0_out_main,   3,   0,    0),
        F( 320000000,      gpll0_out_main, 2.5,   0,    0),
        F( 465000000,      gpll2_out_main,   2,   0,    0),
        F_END
};
which is a super-set of the msm8916 original definitions.
Add in the missing frequency definitions now.

Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220712125922.3461675-5-bryan.odonoghue@linaro.org

The Venus clock frequencies are a copy/paste error from msm8916. Looking
at the original clock-gcc-8936.c ftbl_gcc_venus0_vcodec0_clk defines we
have:

- 133 MHz
- 200 MHz
- 266 MHz

These values are born out by the relevant qualcomm documentation for the
msm8936/msm8939 Venus core performance levels.

Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220712125922.3461675-4-bryan.odonoghue@linaro.org

Standard CCI bus clock clocks are 19.2 MHz and 37.5 MHz. We already define
the 19.2 MHz but are missing the 37.5 MHz.

See qcom kernel drivers/clk/qcom/clock-gcc-8936.c::ftbl_gcc_camss_cci_clk[]

Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220712125922.3461675-3-bryan.odonoghue@linaro.org

Adding a new item to this frequency table I see the existing indentation is
incorrect.

Fixes: 1664014e

 ("clk: qcom: gcc-msm8939: Add MSM8939 Generic Clock Controller")
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220712125922.3461675-2-bryan.odonoghue@linaro.org

When a GDSC is found to be enabled at boot the pm_runtime state will
be unbalanced as the GDSC is later turned off. Fix this by increasing
the usage counter on the power-domain, in line with how we handled the
regulator state.

Fixes: 1b771839

 ("clk: qcom: gdsc: enable optional power domain support")
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Acked-by: Stephen Boyd <sboyd@kernel.org>
Link: https://lore.kernel.org/r/20220713212818.130277-1-bjorn.andersson@linaro.org

Both dispcc and videocc use mmcx power domain now.
Lets drop the supply mmcx from every gdsc.

Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Fixes: 266e5cf3

 ("arm64: dts: qcom: sm8250: remove mmcx regulator")
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220713143200.3686765-1-abel.vesa@linaro.org

CONFIG_CC_VERSION_TEXT="x86_64-linux-gnu-gcc (Ubuntu 7.4.0-1ubuntu1~18.04.1) 7.4.0"
make ARCH=x86_64 CROSS_COMPILE=x86_64-linux-gnu-, will be failed, like this:

drivers/clk/qcom/gpucc-sm8350.c:111:2: error: initializer element is not constant
  gpu_cc_parent,
  ^~~~~~~~~~~~~
drivers/clk/qcom/gpucc-sm8350.c:111:2: note: (near initialization for ‘gpu_cc_parent_data_0[0]’)
drivers/clk/qcom/gpucc-sm8350.c:126:2: error: initializer element is not constant
  gpu_cc_parent,
  ^~~~~~~~~~~~~
drivers/clk/qcom/gpucc-sm8350.c:126:2: note: (near initialization for ‘gpu_cc_parent_data_1[0]’)
make[3]: *** [drivers/clk/qcom/gpucc-sm8350.o] Error 1

It seems that nested constant initializer is not supported in GCC 7.4.0. For portability resons, we should fix it.

Reported-by: Hulk Robot <hulkci@huawei.com>
Fixes: 160758b0

 ("clk: qcom: add support for SM8350 GPUCC")
Signed-off-by: Ren Zhijie <renzhijie2@huawei.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220714121144.71062-1-renzhijie2@huawei.com

Add additional GCC clock sources. This includes PCIe and USB PIPE and
UFS symbol clocks.

Fixes: 2a8aa18c

 ("dt-bindings: clk: qcom: Fix self-validation, split, and clean cruft")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220620071936.1558906-2-dmitry.baryshkov@linaro.org

Add support to the SM8350 display clock controller by extending the SM8250
display clock controller, which is almost identical but has some minor
differences.

Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220706154337.2026269-5-robert.foss@linaro.org

The GPUCC manages the clocks for the Adreno GPU found on the
sm8350 SoCs.

Signed-off-by: Robert Foss <robert.foss@linaro.org>
Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Reviewed-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220706154337.2026269-3-robert.foss@linaro.org

Add  camera clock controller driver found on Qualcomm SM8450 SoC.

Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220701062744.2757931-1-vladimir.zapolskiy@linaro.org

Add and export Rivian EVO PLL configuration and control functions to
clock controller drivers, the PLL is used by SM8450 camera clock
controller.

Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Reviewed-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220701062739.2757912-1-vladimir.zapolskiy@linaro.org

Add controls for Lucid EVO PLL configuration and export control functions
to clock controller drivers, the PLL is used by Qualcomm SM8450 camera
and display clock controllers.

Reviewed-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220701062729.2757893-1-vladimir.zapolskiy@linaro.org

Unify all exported PLL clock configuration functions and data structures
as GPL symbols.

Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Reviewed-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220701062720.2757874-1-vladimir.zapolskiy@linaro.org

After merging lucid and trion pll functions in commit 0b014894


("clk: qcom: clk-alpha-pll: same regs and ops for trion and lucid")
the function clk_trion_pll_configure() is left with an old description
header, which results in a W=2 compile time warning, fix it.

Acked-by: Stephen Boyd <sboyd@kernel.org>
Reviewed-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220701062711.2757855-1-vladimir.zapolskiy@linaro.org

The change adds device tree bindings for camera clock controller
found on SM8450 SoC.

Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220701062622.2757831-2-vladimir.zapolskiy@linaro.org

Add sm8350 DISPCC bindings, which are simply a symlink to the sm8250
bindings. Update the documentation with the new compatible.

Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220706154337.2026269-4-robert.foss@linaro.org

Add device tree bindings for graphics clock controller for
Qualcomm Technology Inc's SM8350 SoCs.

Signed-off-by: Robert Foss <robert.foss@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmityr.baryshkov@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220706154337.2026269-2-robert.foss@linaro.org

Currently gcc-msm8960 driver manually creates tsens platform device
manually. It would be better to follow IPQ8064 approach, where tsens
device is defined as gcc's child device in the device tree. If nothing
else, it removes gcc's dependency on QFPROM, thus allowing clock
controller to be probed earlier.

Don't create it in case there are available child nodes (tsens) inside
the gcc's device tree node.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220521151437.1489111-4-dmitry.baryshkov@linaro.org

Split tsens properties to the child node of the gcc. This follows the
lead of ipq8064 (which also uses a separate node for tsens) and makes
device tree closer to other platforms, where tsens is a completely
separate device.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220521151437.1489111-3-dmitry.baryshkov@linaro.org

MSM8960 shares the design (and the driver) of the global clock
controller with APQ8064. Move it from clock/qcom,gcc-other.yaml to
clock/qcom,gcc-apq8064.yaml.

As the example in gcc-other.yaml was using qcom,gcc-msm8960 compat string,
change it to qcom,gcc-msm8974.

Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220521151437.1489111-2-dmitry.baryshkov@linaro.org

msm8916 has (at least) 6 "General Purpose" clocks that can be muxed to
SoC pins. These clocks are:

GP_CLK{0, 1} : GPIO_{31, 32} (Belongs to CAMSS according to Linux)
GP_CLK_{1-3}{A, B} : GPIO_{49-51, 97, 12, 13} (Belongs to GCC itself)
GP_MN : GPIO_110 (Doesn't seem to be described in gcc,
    ignored in this patch)

Those clocks may be used as e.g. PWM sources for external peripherals.
Add more frequencies to the table for those clocks so it's possible
for arbitrary peripherals to make use of them.

Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Nikita Travkin <nikita@trvn.ru>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220612145955.385787-5-nikita@trvn.ru

Sometimes calculation of d value may result in 0 because of the
rounding after integer division. This causes the following error:

[  113.969689] camss_gp1_clk_src: rcg didn't update its configuration.
[  113.969754] WARNING: CPU: 3 PID: 35 at drivers/clk/qcom/clk-rcg2.c:122 update_config+0xc8/0xdc

Make sure that D value is never zero.

Fixes: 7f891faf

 ("clk: qcom: clk-rcg2: Add support for duty-cycle for RCG")
Signed-off-by: Nikita Travkin <nikita@trvn.ru>
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220612145955.385787-3-nikita@trvn.ru

In cases when MND is not enabled (e.g. when only Half Integer Divider is
used), setting D registers makes no effect.

Fail instead of making ineffective write.

Fixes: 7f891faf

 ("clk: qcom: clk-rcg2: Add support for duty-cycle for RCG")
Signed-off-by: Nikita Travkin <nikita@trvn.ru>
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220612145955.385787-2-nikita@trvn.ru

On SM8250 two found VFE GDSC power domains shall not be operated, if
titan top is turned off, thus the former power domains will be set as
subdomains by a GDSC registration routine.

Fixes: 5d66ca79

 ("clk: qcom: Add camera clock controller driver for SM8250")
Signed-off-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Reviewed-by: Robert Foss <robert.foss@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220519214133.1728979-3-vladimir.zapolskiy@linaro.org

On SDM845 two found VFE GDSC power domains shall not be operated, if
titan top is turned off, thus the former power domains will be set as
subdomains by a GDSC registration routine.

Fixes: 78412c26

 ("clk: qcom: Add camera clock controller driver for SDM845")
Signed-off-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Reviewed-by: Robert Foss <robert.foss@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220519214133.1728979-2-vladimir.zapolskiy@linaro.org

Once the usb sleep clocks are disabled, clock framework is trying to
disable the sleep clock source also.

However, it seems that it cannot be disabled and trying to do so produces:
[  245.436390] ------------[ cut here ]------------
[  245.441233] gcc_sleep_clk_src status stuck at 'on'
[  245.441254] WARNING: CPU: 2 PID: 223 at clk_branch_wait+0x130/0x140
[  245.450435] Modules linked in: xhci_plat_hcd xhci_hcd dwc3 dwc3_qcom leds_gpio
[  245.456601] CPU: 2 PID: 223 Comm: sh Not tainted 5.18.0-rc4 #215
[  245.463889] Hardware name: Xiaomi AX9000 (DT)
[  245.470050] pstate: 204000c5 (nzCv daIF +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[  245.474307] pc : clk_branch_wait+0x130/0x140
[  245.481073] lr : clk_branch_wait+0x130/0x140
[  245.485588] sp : ffffffc009f2bad0
[  245.489838] x29: ffffffc009f2bad0 x28: ffffff8003e6c800 x27: 0000000000000000
[  245.493057] x26: 0000000000000000 x25: 0000000000000000 x24: ffffff800226ef20
[  245.500175] x23: ffffffc0089ff550 x22: 0000000000000000 x21: ffffffc008476ad0
[  245.507294] x20: 0000000000000000 x19: ffffffc00965ac70 x18: fffffffffffc51a7
[  245.514413] x17: 68702e3030303837 x16: 3a6d726f6674616c x15: ffffffc089f2b777
[  245.521531] x14: ffffffc0095c9d18 x13: 0000000000000129 x12: 0000000000000129
[  245.528649] x11: 00000000ffffffea x10: ffffffc009621d18 x9 : 0000000000000001
[  245.535767] x8 : 0000000000000001 x7 : 0000000000017fe8 x6 : 0000000000000001
[  245.542885] x5 : ffffff803fdca6d8 x4 : 0000000000000000 x3 : 0000000000000027
[  245.550002] x2 : 0000000000000027 x1 : 0000000000000023 x0 : 0000000000000026
[  245.557122] Call trace:
[  245.564229]  clk_branch_wait+0x130/0x140
[  245.566490]  clk_branch2_disable+0x2c/0x40
[  245.570656]  clk_core_disable+0x60/0xb0
[  245.574561]  clk_core_disable+0x68/0xb0
[  245.578293]  clk_disable+0x30/0x50
[  245.582113]  dwc3_qcom_remove+0x60/0xc0 [dwc3_qcom]
[  245.585588]  platform_remove+0x28/0x60
[  245.590361]  device_remove+0x4c/0x80
[  245.594179]  device_release_driver_internal+0x1dc/0x230
[  245.597914]  device_driver_detach+0x18/0x30
[  245.602861]  unbind_store+0xec/0x110
[  245.607027]  drv_attr_store+0x24/0x40
[  245.610847]  sysfs_kf_write+0x44/0x60
[  245.614405]  kernfs_fop_write_iter+0x128/0x1c0
[  245.618052]  new_sync_write+0xc0/0x130
[  245.622391]  vfs_write+0x1d4/0x2a0
[  245.626123]  ksys_write+0x58/0xe0
[  245.629508]  __arm64_sys_write+0x1c/0x30
[  245.632895]  invoke_syscall.constprop.0+0x5c/0x110
[  245.636890]  do_el0_svc+0xa0/0x150
[  245.641488]  el0_svc+0x18/0x60
[  245.644872]  el0t_64_sync_handler+0xa4/0x130
[  245.647914]  el0t_64_sync+0x174/0x178
[  245.652340] ---[ end trace 0000000000000000 ]---

So, add CLK_IS_CRITICAL flag to the clock so that the kernel won't try
to disable the sleep clock.

Signed-off-by: Robert Marko <robimarko@gmail.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220515210048.483898-10-robimarko@gmail.com

Add GDSC-s for each of the two USB controllers built-in the IPQ8074.

Signed-off-by: Robert Marko <robimarko@gmail.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220515210048.483898-9-robimarko@gmail.com

Add bindings for the USB GDSCs found in IPQ8074 GCC.

Signed-off-by: Robert Marko <robimarko@gmail.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220515210048.483898-8-robimarko@gmail.com

GCC inside of IPQ8074 also provides power management via built-in GDSCs.
In order to do so, '#power-domain-cells' must be set to 1.

Signed-off-by: Robert Marko <robimarko@gmail.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220515210048.483898-7-robimarko@gmail.com

Currently, attempting to enable the UBI clocks will cause the stuck at
off warning to be printed and clk_enable will fail.

[   14.936694] gcc_ubi1_ahb_clk status stuck at 'off'

Downstream 5.4 QCA kernel has fixed this by seting the BRANCH_HALT_DELAY
flag on UBI clocks, so lets do the same.

Fixes: 5736294a

 ("clk: qcom: ipq8074: add NSS clocks")
Signed-off-by: Robert Marko <robimarko@gmail.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220515210048.483898-6-robimarko@gmail.com

The built-in PPE engine has a dedicated clock for the EIP-197 crypto
engine.

So, since the required clock currently missing add support for it.

Signed-off-by: Robert Marko <robimarko@gmail.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220515210048.483898-5-robimarko@gmail.com