- Apr 25, 2016
-
-
Krzysztof Kozlowski authored
The BIT() macro is obvious and well known, so prefer to use it instead of crafted own macro. Signed-off-by:
Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au>
-
Dan Carpenter authored
There are two issues here: 1) We need to decrement "i" otherwise we unregister something that was not successfully registered. 2) The original code did not unregister the first element in the array where i is zero. Fixes: d293b640 ('crypto: mxc-scc - add basic driver for the MXC SCC') Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
-
Dan Carpenter authored
->src_nents and ->dst_nents are unsigned so they can't be less than zero. I fixed this by introducing a temporary "nents" variable. Fixes: d293b640 ('crypto: mxc-scc - add basic driver for the MXC SCC') Signed-off-by:
-
Horia Geant? authored
Provide hardware state import/export functionality, as mandated by commit 8996eafd ("crypto: ahash - ensure statesize is non-zero") Cc: <stable@vger.kernel.org> # 4.3+ Reported-by:
Jonas Eymann <J.Eymann@gmx.net> Signed-off-by:
Horia Geant? <horia.geanta@nxp.com> Signed-off-by:
-
Gary R Hook authored
A DMA_ENGINE requires DMADEVICES in Kconfig Signed-off-by:
Gary R Hook <gary.hook@amd.com> Signed-off-by:
-
- Apr 20, 2016
-
-
Romain Perier authored
When looking for available engines, the variable "engine" is assigned to "&cesa->engines[i]" at the beginning of the for loop. Replacing next occurences of "&cesa->engines[i]" by "engine" and in order to improve readability. Signed-off-by:
Romain Perier <romain.perier@free-electrons.com> Acked-by:
Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by:
-
Krzysztof Kozlowski authored
Beside regular feed control interrupt, the driver requires also hash interrupt for older SoCs (samsung,s5pv210-secss). However after requesting it, the interrupt handler isn't doing anything with it, not even clearing the hash interrupt bit. Driver does not provide hash functions so it is safe to remove the hash interrupt related code and to not require the interrupt in Device Tree. Signed-off-by:
-
Krzysztof Kozlowski authored
The driver makes copies of memory (input or output scatterlists) if they are not aligned. In s5p_aes_crypt_start() error path (on unsuccessful initialization of output scatterlist), if input scatterlist was not aligned, the driver first freed copied input memory and then unmapped it from the device, instead of doing otherwise (unmap and then free). This was wrong in two ways: 1. Freed pages were still mapped to the device. 2. The dma_unmap_sg() iterated over freed scatterlist structure. The call to s5p_free_sg_cpy() in this error path is not needed because the copied scatterlists will be freed by s5p_aes_complete(). Fixes: 9e4a1100 ("crypto: s5p-sss - Handle unaligned buffers") Signed-off-by:
-
Gary R Hook authored
The CCP has the ability to provide DMA services to the kernel using pass-through mode of the device. Register these services as general purpose DMA channels. Changes since v2: - Add a Signed-off-by Changes since v1: - Allocate memory for a string in ccp_dmaengine_register - Ensure register/unregister calls are properly ordered - Verified all changed files are listed in the diffstat - Undo some superfluous changes - Added a cc: Signed-off-by:
-
Christian Lamparter authored
This patch integrates the ppc4xx-rng driver into the existing crypto4xx. This is because the true random number generator is controlled and part of the security core. Signed-off-by:
Christian Lamparter <chunkeey@googlemail.com> Signed-off-by:
-
Herbert Xu authored
You cannot allocate crypto tfm objects in NORECLAIM or NOFS contexts. The ecryptfs code currently does exactly that for the MD5 tfm. This patch fixes it by preallocating the MD5 tfm in a safe context. The MD5 tfm is also reentrant so this patch removes the superfluous cs_hash_tfm_mutex. Reported-by:
Nicolas Boichat <drinkcat@chromium.org> Signed-off-by:
-
- Apr 18, 2016
-
-
Tadeusz Struk authored
Fix Section mismatch warinig in adf_exit_vf_wq() Reported-by:
kbuild test robot <fengguang.wu@intel.com> Signed-off-by:
Tadeusz Struk <tadeusz.struk@intel.com> Signed-off-by:
-
Tadeusz Struk authored
IRQs need to be enabled when VFs go down in case some VF to PF comms happens. Tested-by:
Suman Bangalore Sathyanarayana <sumanx.bangalore.sathyanarayana@intel.com> Signed-off-by:
-
Tadeusz Struk authored
Before VF sends a signal to PF it should check if PF is still running. Tested-by:
-
Tadeusz Struk authored
The vf2pf_init and vf2pf_exit are exactly the same for all VFs so move them to common and reuse. Tested-by:
-
- Apr 15, 2016
-
-
Michal Hocko authored
__GFP_REPEAT has a rather weak semantic but since it has been introduced around 2.6.12 it has been ignored for low order allocations. lzo_init uses __GFP_REPEAT to allocate LZO1X_MEM_COMPRESS 16K. This is order 3 allocation request and __GFP_REPEAT is ignored for this size as well as all <= PAGE_ALLOC_COSTLY requests. Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: "David S. Miller" <davem@davemloft.net> Cc: linux-crypto@vger.kernel.org Signed-off-by:
Michal Hocko <mhocko@suse.com> Signed-off-by:
-
Kefeng Wang authored
This adds the Hisilicon Random Number Generator(RNG) support, which is found in Hip04 and Hip05 soc. Reviewed-by:
Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by:
Kefeng Wang <wangkefeng.wang@huawei.com> Signed-off-by:
-
Kefeng Wang authored
Document the devicetree bindings for the random number generator found on Hisilicon Hip04 and Hip05 soc. Signed-off-by:
Rob Herring <rob@kernel.org> Signed-off-by:
-
Steffen Trumtrar authored
According to the Freescale GPL driver code, there are two different Security Controller (SCC) versions: SCC and SCC2. The SCC is found on older i.MX SoCs, e.g. the i.MX25. This is the version implemented and tested here. As there is no publicly available documentation for this IP core, all information about this unit is gathered from the GPL'ed driver from Freescale. Signed-off-by:
Steffen Trumtrar <s.trumtrar@pengutronix.de> Signed-off-by:
-
Steffen Trumtrar authored
Add the Security Controller (SCC) module to the dtsi. Signed-off-by:
-
Steffen Trumtrar authored
Add documentation for the Freescale Security Controller (SCC) found on i.MX25 SoCs. Signed-off-by:
Rob Herring <robh@kernel.org> Signed-off-by:
-
Tadeusz Struk authored
VFs call adf_dev_stop() from a PF to VF interrupt bottom half. This causes an oops "scheduling while atomic", because it tries to acquire a mutex to un-register crypto algorithms. This patch fixes the issue by calling adf_dev_stop() asynchronously. Changes in v2: - change kthread to a work queue. Signed-off-by:
-
Mike Galbraith authored
Direct include of rwlock_types.h breaks RT, use spinlock_types.h instead. Fixes: 553d2374 crypto: ccp - Support for multiple CCPs Signed-off-by:
Mike Galbraith <umgwanakikbuti@gmail.com> Signed-off-by:
-
Eric Biggers authored
Signed-off-by:
Eric Biggers <ebiggers3@gmail.com> Signed-off-by:
-
- Apr 05, 2016
-
-
Krzysztof Kozlowski authored
Correct smasung.com into samsung.com. Signed-off-by:
-
Tadeusz Struk authored
It returns always zero anyway. Signed-off-by:
-
Tadeusz Struk authored
When stopping devices it is not enought to loop backwards. We need to explicitly stop all VFs first. Signed-off-by:
-
Stephan Mueller authored
The HMAC implementation allows setting the HMAC key independently from the hashing operation. Therefore, the key only needs to be set when a new key is generated. This patch increases the speed of the HMAC DRBG by at least 35% depending on the use case. The patch is fully CAVS tested. Signed-off-by:
Stephan Mueller <smueller@chronox.de> Signed-off-by:
-
Corentin LABBE authored
The current sun4i-ss driver could generate data corruption when ciphering/deciphering. It occurs randomly on end of handled data. No root cause have been found and the only way to remove it is to replace all spin_lock_bh by their irq counterparts. Fixes: 6298e948 ("crypto: sunxi-ss - Add Allwinner Security System crypto accelerator") Signed-off-by:
LABBE Corentin <clabbe.montjoie@gmail.com> Cc: stable <stable@vger.kernel.org> Signed-off-by:
-
Tudor Ambarus authored
Signed-off-by:
Tudor Ambarus <tudor-dan.ambarus@nxp.com> Signed-off-by:
-
Tudor Ambarus authored
memcopying to a (null pointer + offset) will result in memory corruption or undefined behaviour. Signed-off-by:
-
Ahsan Atta authored
Remove redundant nrbg rings. Signed-off-by:
Ahsan Atta <ahsan.atta@intel.com> Signed-off-by:
-
Tadeusz Struk authored
FW requires the const_tab to be 1024 bytes aligned. Signed-off-by:
-
Nicolai Stange authored
Within the copying loop in mpi_read_raw_from_sgl(), the last input SGE's byte count gets artificially extended as follows: if (sg_is_last(sg) && (len % BYTES_PER_MPI_LIMB)) len += BYTES_PER_MPI_LIMB - (len % BYTES_PER_MPI_LIMB); Within the following byte copying loop, this causes reads beyond that SGE's allocated buffer: BUG: KASAN: slab-out-of-bounds in mpi_read_raw_from_sgl+0x331/0x650 at addr ffff8801e168d4d8 Read of size 1 by task systemd-udevd/721 [...] Call Trace: [<ffffffff818c4d35>] dump_stack+0xbc/0x117 [<ffffffff818c4c79>] ? _atomic_dec_and_lock+0x169/0x169 [<ffffffff814af5d1>] ? print_section+0x61/0xb0 [<ffffffff814b1109>] print_trailer+0x179/0x2c0 [<ffffffff814bc524>] object_err+0x34/0x40 [<ffffffff814bfdc7>] kasan_report_error+0x307/0x8c0 [<ffffffff814bf315>] ? kasan_unpoison_shadow+0x35/0x50 [<ffffffff814bf38e>] ? kasan_kmalloc+0x5e/0x70 [<fffffff... -
Nicolai Stange authored
Within the byte reading loop in mpi_read_raw_sgl(), there are two housekeeping indices used, z and x. At all times, the index z represents the number of output bytes covered by the input SGEs for which processing has completed so far. This includes any leading zero bytes within the most significant limb. The index x changes its meaning after the first outer loop's iteration though: while processing the first input SGE, it represents "number of leading zero bytes in most significant output limb" + "current position within current SGE" For the remaining SGEs OTOH, x corresponds just to "current position within current SGE" After all, it is only the sum of z and x that has any meaning for the output buffer and thus, the "number of leading zero bytes in most significant output limb" part can be moved away from x into z from the beginning, opening up the opportunity for cleaner code. Before the outer loop iterating over the SGEs, don't initialize z with zero, but with the number of leading zero bytes in the most significant output limb. For the inner loop iterating over a single SGE's bytes, get rid of the buf_shift offset to x' bounds and let x run from zero to sg->length - 1. Signed-off-by:
Nicolai Stange <nicstange@gmail.com> Signed-off-by:
-
Nicolai Stange authored
The number of bits, nbits, is calculated in mpi_read_raw_from_sgl() as follows: nbits = nbytes * 8; Afterwards, the number of leading zero bits of the first byte get subtracted: nbits -= count_leading_zeros(*(u8 *)(sg_virt(sgl) + lzeros)); However, count_leading_zeros() takes an unsigned long and thus, the u8 gets promoted to an unsigned long. Thus, the above doesn't subtract the number of leading zeros in the most significant nonzero input byte from nbits, but the number of leading zeros of the most significant nonzero input byte promoted to unsigned long, i.e. BITS_PER_LONG - 8 too many. Fix this by subtracting count_leading_zeros(...) - (BITS_PER_LONG - 8) from nbits only. Fixes: 2d4d1eea ("lib/mpi: Add mpi sgl helpers") Signed-off-by:
-
Nicolai Stange authored
In mpi_read_raw_from_sgl(), unsigned nbits is calculated as follows: nbits = nbytes * 8; and redundantly cleared later on if nbytes == 0: if (nbytes > 0) ... else nbits = 0; Purge this redundant clearing for the sake of clarity. Signed-off-by: -
Nicolai Stange authored
At the very beginning of mpi_read_raw_from_sgl(), the leading zeros of the input scatterlist are counted: lzeros = 0; for_each_sg(sgl, sg, ents, i) { ... if (/* sg contains nonzero bytes */) break; /* sg contains nothing but zeros here */ ents--; lzeros = 0; } Later on, the total number of trailing nonzero bytes is calculated by subtracting the number of leading zero bytes from the total number of input bytes: nbytes -= lzeros; However, since lzeros gets reset to zero for each completely zero leading sg in the loop above, it doesn't include those. Besides wasting resources by allocating a too large output buffer, this mistake propagates into the calculation of x, the number of leading zeros within the most significant output limb: x = BYTES_PER_MPI_LIMB - nbytes % BYTES_PER_MPI_LIMB; What's more, the low order bytes of the output, equal in number to the extra bytes in nbytes, are left uninitialized. Fix this by adjusting nbytes for each completely zero leading scatterlist entry. Fixes: 2d4d1eea ("lib/mpi: Add mpi sgl helpers") Signed-off-by: -
Nicolai Stange authored
Currently, the nbytes local variable is calculated from the len argument as follows: ... mpi_read_raw_from_sgl(..., unsigned int len) { unsigned nbytes; ... if (!ents) nbytes = 0; else nbytes = len - lzeros; ... } Given that nbytes is derived from len in a trivial way and that the len argument is shadowed by a local len variable in several loops, this is just confusing. Rename the len argument to nbytes and get rid of the nbytes local variable. Do the nbytes calculation in place. Signed-off-by: -
Nicolai Stange authored
Currently, mpi_read_buffer() writes full limbs to the output buffer and moves memory around to purge leading zero limbs afterwards. However, with commit 9cbe21d8 ("lib/mpi: only require buffers as big as needed for the integer") the caller is only required to provide a buffer large enough to hold the result without the leading zeros. This might result in a buffer overflow for small MP numbers with leading zeros. Fix this by coping the result to its final destination within the output buffer and not copying the leading zeros at all. Fixes: 9cbe21d8 ("lib/mpi: only require buffers as big as needed for the integer") Signed-off-by:
-
