- Jan 05, 2022
-
-
David S. Miller authored
Jie Wang says: ==================== net: hns3: refactor rss/tqp stats functions Currently, hns3 PF and VF module have two sets of rss and tqp stats APIs to provide get and set functions. Most of these APIs are the same. There is no need to keep these two sets of same functions for double development and bugfix work. This series refactor the rss and tqp stats APIs in hns3 PF and VF by implementing one set of common APIs for PF and VF reuse and deleting the old APIs. ==================== Signed-off-by:David S. Miller <davem@davemloft.net>
-
Jie Wang authored
Currently PF and VF use two sets of command code for modules to interact with firmware. These codes values are same espect the macro names. It is redundent to keep two sets of command code for same functions between PF and VF. So this patch firstly creates a unified command code for PF and VF module. We keep the macro name same with the PF command code name to avoid too many meaningless modifications. Secondly the new common command codes are used to replace the old ones in VF and deletes the old ones. Signed-off-by:
Jie Wang <wangjie125@huawei.com> Signed-off-by:
-
Jie Wang authored
This patch firstly uses new tqp struct(hclge_comm_tqp) and removes the old VF tqp struct(hclgevf_tqp). All the tqp stats members used in VF module are modified according to the new hclge_comm_tqp. Secondly VF tqp stats APIs are refactored to use new common tqp stats APIs. The old tqp stats APIs in VF are deleted. Signed-off-by:
-
Jie Wang authored
This patch firstly uses new tqp struct(hclge_comm_tqp) and deletes the old PF tqp struct(hclge_tqp). All the tqp stats members used in PF module are modified according to the new hclge_comm_tqp. Secondly PF tqp stats APIs are refactored to use new common tqp stats APIs. The old tqp stats APIs in PF are deleted. Signed-off-by:
-
Jie Wang authored
This patch creates new set of common tqp stats structures and APIs for PF and VF tqp stats module. Subfunctions such as get tqp stats, update tqp stats and reset tqp stats are inclued in this patch. These new common tqp stats APIs will be used to replace the old PF and VF tqp stats APIs in next patches. Signed-off-by:
-
Jie Wang authored
This patch uses common rss init APIs to replace the old APIs in VF rss module and removes the old VF rss init APIs. Several related Subfunctions and macros are also modified in this patch. Signed-off-by:
-
Jie Wang authored
This patch uses common rss init APIs to replace the old APIs in PF rss module and deletes the old PF rss init APIs. Some related subfunctions and macros are also modified in this patch. Signed-off-by:
-
Jie Wang authored
This patch creates new set of common rss init APIs for PF and VF rss module. Subfunctions called by rss init process are also created include rss tuple configuration and rss indirect table configuration. These new common rss init APIs will be used to replace the old PF and VF rss init APIs in next patches. Signed-off-by:
-
Jie Wang authored
This patch uses new common rss set APIs to replace the old APIs in VF rss module and removes those old rss set APIs. The related macros in VF are also modified. Signed-off-by:
-
Jie Wang authored
This patch uses new common rss set APIs to replace the old APIs in PF rss module and deletes the old rss set APIs. The related macros are also modified. Signed-off-by:
-
Jie Wang authored
Currently, hns3 PF and VF rss module have two sets of rss set APIs to configure rss. There is no need to keep two sets of these same APIs. So this patch creates new set of common rss set APIs for PF and VF reuse. These new APIs will be used to unify old APIs in next patches. Signed-off-by:
-
Jie Wang authored
This patch firstly uses new rss parameter struct(hclge_comm_rss_cfg) as child member of hclgevf_dev and deletes the original child rss parameter member(hclgevf_rss_cfg). All the rss parameter members used in VF rss module is modified according to the new hclge_comm_rss_cfg. Secondly VF rss get APIs are refactored to use new common rss get APIs. The old rss get APIs in VF are deleted. Signed-off-by:
-
Jie Wang authored
This patch firstly uses new rss parameter struct(hclge_comm_rss_cfg) as child member of hclge_dev and deletes the original child rss parameter members in vport. All the vport child rss parameter members used in PF rss module is modified according to the new hclge_comm_rss_cfg. Secondly PF rss get APIs are refactored to use new common rss get APIs. The old rss get APIs in PF are deleted. Signed-off-by:
-
Jie Wang authored
The PF and VF rss get APIs are almost the same espect the suffixes of API names. These same impementions bring double development and bugfix work. So this patch creates new common rss get APIs for PF and VF rss module. Subfunctions called by rss query process are also created(e.g. rss tuple conversion APIs). These new common rss get APIs will be used to replace PF and VF old rss APIs in next patches. Signed-off-by:
-
Jie Wang authored
Currently, there are two different sets of special command codes in PF and VF cmdq modules, this is because VF driver only uses small part of all the command codes. In other words, these not used command codes in VF are also sepcial command codes theoretically. So this patch unifes the special command codes and deletes the bool param is_pf of hclge_comm_send. All the related functions are refactored according to the new hclge_comm_send function prototype. Signed-off-by:
-
Jie Wang authored
Currently PF stores its rss parameters in vport structure. VF stores rss configurations in hclgevf_rss_cfg structure. Actually hns3 rss parameters are same beween PF and VF. The two set of rss parameters are redundent and may add extra bugfix work. So this patch creates new common rss parameter struct(hclge_comm_rss_cfg) to unify PF and VF rss configurations. These new structures will be used to unify rss configurations in PF and VF rss APIs in next patches. Signed-off-by:
-
David S. Miller authored
Horatiu Vultur says: ==================== net: lan966x: Extend switchdev with mdb support This patch series extends lan966x with mdb support by implementing the switchdev callbacks: SWITCHDEV_OBJ_ID_PORT_MDB and SWITCHDEV_OBJ_ID_HOST_MDB. It adds support for both ipv4/ipv6 entries and l2 entries. v2->v3: - rename PGID_FIRST and PGID_LAST to PGID_GP_START and PGID_GP_END - don't forget and relearn an entry for the CPU if there are more references to the cpu. v1->v2: - rename lan966x_mac_learn_impl to __lan966x_mac_learn - rename lan966x_mac_cpu_copy to lan966x_mac_ip_learn - fix grammar and typos in comments and commit messages - add reference counter for entries that copy frames to CPU ==================== Reviewed-by:
Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by:
-
Horatiu Vultur authored
Extend lan966x driver with mdb support by implementing the switchdev calls: SWITCHDEV_OBJ_ID_PORT_MDB and SWITCHDEV_OBJ_ID_HOST_MDB. It is allowed to add both ipv4/ipv6 entries and l2 entries. To add ipv4/ipv6 entries is not required to use the PGID table while for l2 entries it is required. The PGID table is much smaller than MAC table so only fewer l2 entries can be added. Signed-off-by:
Horatiu Vultur <horatiu.vultur@microchip.com> Signed-off-by:
-
Horatiu Vultur authored
The first entries in the PGID table are used by the front ports while the last entries are used for different purposes like flooding mask, copy to CPU, etc. So add these macros to define which entries can be used for general purpose. Signed-off-by:
-
Horatiu Vultur authored
Extend mac functionality with the function lan966x_mac_ip_learn. This function adds an entry in the MAC table for IP multicast addresses. These entries can copy a frame to the CPU but also can forward on the front ports. This functionality is needed for mdb support. In case the CPU and some of the front ports subscribe to an IP multicast address. Signed-off-by:
-
David S. Miller authored
Daniel Golle says: ==================== net: ethernet: mtk_eth_soc: refactoring and Clause 45 Rework value and type of mdio read and write functions in mtk_eth_soc and generally clean up and unify both functions. Then add support to access Clause 45 phy registers, using newly introduced helper inline functions added by a patch Russell King has suggested in a reply to an earlier version of this series [1]. All three commits are tested on the Bananapi BPi-R64 board having MediaTek MT7531BE DSA gigE switch using clause 22 MDIO and Ubiquiti UniFi 6 LR access point having Aquantia AQR112C PHY using clause 45 MDIO. [1]: https://lore.kernel.org/netdev/Ycr5Cna76eg2B0An@shell.armlinux.org.uk/ v11: also address return value of mtk_mdio_busy_wait v10: correct order of SoB lines in 2/3, change patch order in series v9: improved formatting and Cc missing maintainer v8: add patch from Russel King, switch to bitfield helper macros v7: remove unneeded variables and order OR-ed call parameters v6: further clean up functions and more cleanly separate patches v5: fix wrong variable name in first patch covered by follow-up patch v4: clean-up return values and types, split into two commits v3: return -1 instead of 0xffff on error in _mtk_mdio_write v2: use MII_DEVADDR_C45_SHIFT and MII_REGADDR_C45_MASK to extract device id and register address. Unify read and write functions to have identical types and parameter names where possible as we are anyway already replacing both function bodies. ==================== Signed-off-by:
-
Daniel Golle authored
Implement read and write access to IEEE 802.3 Clause 45 Ethernet phy registers while making use of new mdiobus_c45_regad and mdiobus_c45_devad helpers. Tested on the Ubiquiti UniFi 6 LR access point featuring MediaTek MT7622BV WiSoC with Aquantia AQR112C. Signed-off-by:
Daniel Golle <daniel@makrotopia.org> Signed-off-by:
-
Russell King (Oracle) authored
Add a couple of helpers and definitions to extract the clause 45 regad and devad fields from the regnum passed into MDIO drivers. Tested-by:
Andrew Lunn <andrew@lunn.ch> Signed-off-by:
Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Signed-off-by:
-
Daniel Golle authored
Instead of returning -1 (-EPERM) when MDIO bus is stuck busy while writing or 0xffff if it happens while reading, return the appropriate -ETIMEDOUT. Also fix return type to int instead of u32. Refactor functions to use bitfield helpers instead of having various masking and shifting constants in the code, which also results in the register definitions in the header file being more obviously related to what is stated in the MediaTek's Reference Manual. Fixes: 656e7052 ("net-next: mediatek: add support for MT7623 ethernet") Signed-off-by:
-
M Chetan Kumar authored
Depending on BIOS configuration IOSM driver exchanges protocol required for putting device into D3L2 or D3L1.2. ipc_pcie_suspend_s2idle() is implemented to put device to D3L1.2. This patch forces PCI core know this device should stay at D0. - pci_save_state()is expensive since it does a lot of slow PCI config reads. The reported issue is not observed on x86 platform. The supurios wake on AMD platform needs to be futher debugged with orignal patch submitter [1]. Also the impact of adding pci_save_state() needs to be assessed by testing it on other platforms. This reverts commit f4dd5174("net: wwan: iosm: Keep device at D0 for s2idle case"). [1] https://lore.kernel.org/all/20211224081914.345292-2-kai.heng.feng@canonical.com/ Signed-off-by:
M Chetan Kumar <m.chetan.kumar@linux.intel.com> Link: https://lore.kernel.org/r/20220104150213.1894-1-m.chetan.kumar@linux.intel.com Signed-off-by:
Jakub Kicinski <kuba@kernel.org>
-
Jakub Kicinski authored
Merge tag 'mac80211-next-for-net-next-2022-01-04' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next Johannes Berg says: ==================== Just a few more changes: - mac80211: allow non-standard VHT MCSes 10/11 - mac80211: add sleepable station iterator for drivers - nl80211: clarify a comment - mac80211: small cleanup to use typed element helpers * tag 'mac80211-next-for-net-next-2022-01-04' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next: mac80211: use ieee80211_bss_get_elem() nl80211: clarify comment for mesh PLINK_BLOCKED state mac80211: Add stations iterator where the iterator function may sleep mac80211: allow non-standard VHT MCS-10/11 ==================== Link: https://lore.kernel.org/r/20220104153403.69749-1-johannes@sipsolutions.net Signed-off-by:
-
- Jan 04, 2022
-
-
Johannes Berg authored
Instead of ieee80211_bss_get_ie(), use the more typed ieee80211_bss_get_elem(). Link: https://lore.kernel.org/r/20211220113609.56f8e2a70152.Id5a56afb8a4f9b38d10445e5a1874e93e84b5251@changeid Signed-off-by:
Johannes Berg <johannes.berg@intel.com>
-
Felix Fietkau authored
When a mesh link is in blocked state, it is very useful to still allow auth requests from the peer to re-establish it. When a remote node is power cycled, the peer state can easily end up in blocked state if multiple auth attempts are performed. Since this can lead to several minutes of downtime, we should accept auth attempts of the peer after it has come back. Signed-off-by:
Felix Fietkau <nbd@nbd.name> Link: https://lore.kernel.org/r/20211220105147.88625-1-nbd@nbd.name Signed-off-by:
-
Martin Blumenstingl authored
ieee80211_iterate_active_interfaces() and ieee80211_iterate_active_interfaces_atomic() already exist, where the former allows the iterator function to sleep. Add ieee80211_iterate_stations() which is similar to ieee80211_iterate_stations_atomic() but allows the iterator to sleep. This is needed for adding SDIO support to the rtw88 driver. Some interators there are reading or writing registers. With the SDIO ops (sdio_readb, sdio_writeb and friends) this means that the iterator function may sleep. Signed-off-by:
Martin Blumenstingl <martin.blumenstingl@googlemail.com> Link: https://lore.kernel.org/r/20211228211501.468981-2-martin.blumenstingl@googlemail.com Signed-off-by:
-
Ping-Ke Shih authored
Some AP can possibly try non-standard VHT rate and mac80211 warns and drops packets, and leads low TCP throughput. Rate marked as a VHT rate but data is invalid: MCS: 10, NSS: 2 WARNING: CPU: 1 PID: 7817 at net/mac80211/rx.c:4856 ieee80211_rx_list+0x223/0x2f0 [mac8021 Since commit c27aa56a ("cfg80211: add VHT rate entries for MCS-10 and MCS-11") has added, mac80211 adds this support as well. After this patch, throughput is good and iw can get the bitrate: rx bitrate: 975.1 MBit/s VHT-MCS 10 80MHz short GI VHT-NSS 2 or rx bitrate: 1083.3 MBit/s VHT-MCS 11 80MHz short GI VHT-NSS 2 Buglink: https://bugzilla.suse.com/show_bug.cgi?id=1192891 Reported-by:Goldwyn Rodrigues <rgoldwyn@suse.com> Signed-off-by:
Ping-Ke Shih <pkshih@realtek.com> Link: https://lore.kernel.org/r/20220103013623.17052-1-pkshih@realtek.com Signed-off-by:
-
Minghao Chi authored
Return value from efx_mcdi_rpc() directly instead of taking this in another redundant variable. Reported-by:
Zeal Robot <zealci@zte.com.cn> Signed-off-by:
Minghao Chi <chi.minghao@zte.com.cn> Signed-off-by:
CGEL ZTE <cgel.zte@gmail.com> Signed-off-by:
-
David S. Miller authored
xu xin says: ==================== ipv4: Namespaceify two sysctls related with mtu The following patch series enables the min_pmtu and mtu_expires to be visible and configurable per net namespace. Different namespace application might have different requirements on the setting of min_pmtu and mtu_expires. If these two patches are applied, inside a net namespace we create, we can see two more sysctls under /proc/sys/net/ipv4/route: 1. min_pmtu 2. mtu_expires where min_pmtu and mtu_expires are configurable. ==================== Signed-off-by: -
xu xin authored
This patch enables the sysctl mtu_expires to be configured per net namespace. Signed-off-by:
xu xin <xu.xin16@zte.com.cn> Signed-off-by:
-
xu xin authored
This patch enables the sysctl min_pmtu to be configured per net namespace. Signed-off-by:
-
Jakub Kicinski authored
Recent bpf-next merge brought in header changes which uncovered includes missing in net-next which were not present in bpf-next. Build problems happen only on less-popular arches like hppa, sparc, alpha etc. I could repro the build problem with ice but not the mlx5 problem Abdul was reporting. mlx5 does look like it should include filter.h, anyway. Reported-by:
Abdul Haleem <abdhalee@linux.vnet.ibm.com> Fixes: e63a0234 ("Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next") Link: https://lore.kernel.org/all/7c03768d-d948-c935-a7ab-b1f963ac7eed@linux.vnet.ibm.com/ Signed-off-by:
-
Aleksander Jan Bajkowski authored
This patch adds support for scatter gather DMA. DMA in PMAC splits the packet into several buffers when the MTU on the CPU port is less than the MTU of the switch. The first buffer starts at an offset of NET_IP_ALIGN. In subsequent buffers, dma ignores the offset. Thanks to this patch, the user can still connect to the device in such a situation. For normal configurations, the patch has no effect on performance. Signed-off-by:
Aleksander Jan Bajkowski <olek2@wp.pl> Signed-off-by:
-
Radu Pirea (NXP OSS) authored
Add support for external timestamp and periodic signal output. TJA1103 have one periodic signal and one external time stamp signal that can be multiplexed on all 11 gpio pins. The periodic signal can be only enabled or disabled. Have no start time and if is enabled will be generated with a period of one second in sync with the LTC seconds counter. The phase change is possible only with a half of a second. The external timestamp signal has no interrupt and no valid bit and that's why the timestamps are handled by polling in .do_aux_work. Signed-off-by:
Radu Pirea (NXP OSS) <radu-nicolae.pirea@oss.nxp.com> Acked-by:
Richard Cochran <richardcochran@gmail.com> Signed-off-by:
-
David S. Miller authored
Paul Blakey says: ==================== net/sched: Pass originating device to drivers offloading ct connection Currently, drivers register to a ct zone that can be shared by multiple devices. This can be inefficient for the driver to offload, as it needs to handle all the cases where the tuple can come from, instead of where it's most likely will arive from. For example, consider the following tc rules: tc filter add dev dev1 ... flower action ct commit zone 5 \ action mirred egress redirect dev dev2 tc filter add dev dev2 ... flower action ct zone 5 \ action goto chain chain 2 tc filter add dev dev2 ... flower ct_state +trk+est ... \ action mirred egress redirect dev dev1 Both dev2 and dev1 register to the zone 5 flow table (created by act_ct). A tuple originating on dev1, going to dev2, will be offloaded to both devices, and both will need to offload both directions, resulting in 4 total rules. The traffic will only hit originiating tuple on dev1, and reply tuple on dev2. By passing the originating device that created the connection with the tuple, dev1 can choose to offload only the originating tuple, and dev2 only the reply tuple. Resulting in a more efficient offload. The first patch adds an act_ct nf conntrack extension, to temporarily store the originiating device from the skb before offloading the connection once the connection is established. Once sent to offload, it fills the tuple originating device. The second patch get this information from tuples which pass in openvswitch. The third patch is Mellanox driver ct offload implementation using this information to provide a hint to firmware of where this offloaded tuple packets will arrive from (LOCAL or UPLINK port), and thus increase insertion rate. ==================== Signed-off-by: -
Paul Blakey authored
Get originating device from tuple offload metadata match ingress_ifindex, and set flow_source hint to either LOCAL for vf/sf reps, UPLINK for uplink/wire/tunnel devices/bond, or ANY (as before this patch) for all others. This allows lower layer (software steering or firmware) to insert the tuple rule only in one table (either rx or tx) instead of two (rx and tx). Signed-off-by:
Paul Blakey <paulb@nvidia.com> Signed-off-by:
-
Paul Blakey authored
To give drivers the originating device information for optimized connection tracking offload, fill in act ct extension with ifindex from skb. Signed-off-by:
-
