Merge tag 'samsung-dt-6.3-2' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into arm/dt

Samsung DTS ARM changes for v6.3, part two

Several cleanups pointed out by `make dtbs_check`:
1. Align LED status node name with bindings.
2. Drop redundant properties.
3. Move i2c-gpio node out of soc to top-level, as soc node is expected
   to have only MMIO nodes.
4. Correct SPI NOR flash compatible in SMDK5250 and SMDKv310.
5. Align GPIO property names in WM1811-family codec nodes with bindings.
6. Correct MAX98090 codec DAI cells in Snow.

* tag 'samsung-dt-6.3-2' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
  ARM: dts: exynos: correct max98090 DAI argument in Snow
  ARM: dts: s5pv210: add "gpios" suffix to wlf,ldo1ena on Aries
  ARM: dts: exynos: add "gpios" suffix to wlf,ldo1ena on Arndale
  ARM: dts: exynos: add "gpios" suffix to wlf,ldo1ena on Midas
  ARM: dts: exynos: correct SPI nor compatible in SMDK5250
  ARM: dts: exynos: correct SPI nor compatible in SMDKv310
  ARM: dts: exynos: move I2C10 out of soc node on Arndale
  ARM: dts: exynos: drop redundant address/size cells from I2C10 on Arndale
  ARM: dts: exynos: drop default status from I2C10 on Arndale
  ARM: dts: exynos: align status led name with bindings on Origen4210

Link: https://lore.kernel.org/r/20230211113103.58894-1-krzysztof.kozlowski@linaro.org


Signed-off-by: Arnd Bergmann <arnd@arndb.de>

AT91 device tree updates for 6.3 #2

It contains:
- cleanups arround flexcom nodes on SAM9X60 SoC as follows:
	- preserve same ID for flexcoms and the embedded nodes (e.g. flx4
	  will embed uart4, spi4, i2c4 but not e.g. uart1, spi2, i2c3);
	- SoC specific bindings were moved from board specific file to SoC
	  specific file
	- DMA bindings for all flexcom nodes were added
	- SoC file was filled with missing flexcom nodes
- new SAM9X60 Curiosity board that contains 1 uSDcard interface, 1 SDcard
  interface, 1 USB device interface, 2 USB Type-A interfaces, 2 CAN
  interfaces, 1 10/100 Ethernet interface, 1 LCD RGB666 interface,
  1 Gb DDR2, 4 Gb NAND Flash, 2Kb EEPROM, leds, button, power
  regulators, UART and JTAG connectors

* tag 'at91-dt-6.3-2' of https://git.kernel.org/pub/scm/linux/kernel/git/at91/linux:
  ARM: dts: at91: sam9x60_curiosity: Add device tree for sam9x60 curiosity board
  dt-bindings: arm: at91: Add info on sam9x60 curiosity
  ARM: dts: at91: sam9x60: Add missing flexcom definitions
  ARM: dts: at91: sam9x60: Add DMA bindings for the flexcom nodes
  ARM: dts: at91: sam9x60: Specify the FIFO size for the Flexcom UART
  ARM: dts: at91: sam9x60: fix spi4 node
  ARM: dts: at91: sam9x60: move flexcom definitions
  ARM: dts: at91: sam9x60: Fix the label numbering for the flexcom functions

Link: https://lore.kernel.org/r/20230209084930.289721-1-claudiu.beznea@microchip.com


Signed-off-by: Arnd Bergmann <arnd@arndb.de>

The property "snps,usb2_gadget_lpm_disable" is wrong.
It should be fixed to "snps,usb2-gadget-lpm-disable".

Cc: stable@vger.kernel.org
Fixes: 19fee1a1

 ("arm64: dts: uniphier: Add USB-device support for PXs3 reference board")
Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Link: https://lore.kernel.org/r/20230207021429.28925-1-hayashi.kunihiko@socionext.com


Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Add sociopnext,syscon-uhs-mode prpperty to the SD node to refer the handle
of the control logic node.

Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Link: https://lore.kernel.org/r/20230207023514.29783-9-hayashi.kunihiko@socionext.com


Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Add "syscon" compatible string to the nodes for soc-glue-debug
according to the DT schema.

Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Link: https://lore.kernel.org/r/20230207023514.29783-8-hayashi.kunihiko@socionext.com


Signed-off-by: Arnd Bergmann <arnd@arndb.de>

The nodes for some glue layers don't include necessary reg properties.
Add the properties according to the DT schema.

Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Link: https://lore.kernel.org/r/20230207023514.29783-7-hayashi.kunihiko@socionext.com


Signed-off-by: Arnd Bergmann <arnd@arndb.de>

The node names for SoC-dependent controllers and PHYs should be
generic ones according to the DT schemas.

Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Link: https://lore.kernel.org/r/20230207023514.29783-6-hayashi.kunihiko@socionext.com


Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Add sociopnext,syscon-uhs-mode prpperty to the SD node to refer the handle
of the control logic node.

Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Link: https://lore.kernel.org/r/20230207023514.29783-5-hayashi.kunihiko@socionext.com


Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Add "syscon" compatible string to the nodes for soc-glue-debug
according to the DT schema.

Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Link: https://lore.kernel.org/r/20230207023514.29783-4-hayashi.kunihiko@socionext.com


Signed-off-by: Arnd Bergmann <arnd@arndb.de>

The nodes for glue layers should include "reg" property.
Add the property according to the DT schema.

Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Link: https://lore.kernel.org/r/20230207023514.29783-3-hayashi.kunihiko@socionext.com


Signed-off-by: Arnd Bergmann <arnd@arndb.de>

The node names for SoC-dependent controllers and PHYs should be
generic ones according to the DT schemas.

Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Link: https://lore.kernel.org/r/20230207023514.29783-2-hayashi.kunihiko@socionext.com


Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'aspeed-6.3-devicetree' of git://git.kernel.org/pub/scm/linux/kernel/git/joel/bmc into arm/dt

ASPEED device tree updates for 6.3

 - New machines

   * Ufispace NCPLite AST2600 BMC
   * Facebook Greatlakes AST2600 BMC

 - Updates for ethanolx, bletchley and tyan s8036

* tag 'aspeed-6.3-devicetree' of git://git.kernel.org/pub/scm/linux/kernel/git/joel/bmc:
  ARM: dts: aspeed: p10bmc: Enable UART2
  ARM: dts: aspeed: Add device tree for Ufispace NCPLite BMC
  dt-bindings: arm: aspeed: document Ufispace NCPLite BMC
  dt-bindings: vendor-prefixes: Add prefix for Ufi Space
  arm: dts: aspeed: tyan s8036: Enable kcs interrupts
  ARM: dts: aspeed: bletchley: Enable wdtrst1
  ARM: dts: aspeed: bletchley: Rename flash1 label
  ARM: dts: aspeed: ethanolx: Add BIOS flash chip
  ARM: dts: aspeed: ethanolx: Enable CTS/RTS pins on UART1
  ARM: dts: aspeed: ethanolx: Add label for the master partition
  ARM: dts: aspeed: ethanolx: Correct EEPROM device name
  ARM: dts: aspeed: ethanolx: Enable VUART
  ARM: dts: aspeed: greatlakes: Add Facebook greatlakes (AST2600) BMC
  dt-bindings: arm: aspeed: add Facebook Greatlakes board

Link: https://lore.kernel.org/r/CACPK8XdbffU5yRSZF-zR2xv-+6aJK+hEXP8TOkW=SvS+nNTGxg@mail.gmail.com


Signed-off-by: Arnd Bergmann <arnd@arndb.de>

The max98090 has only one DAI and does not take argument to DAI
phandles:

  exynos5250-snow-rev5.dtb: audio-codec@10: #sound-dai-cells:0:0: 0 was expected

Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://lore.kernel.org/r/20230208160424.371678-1-krzysztof.kozlowski@linaro.org


Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

The GPIOs properties should end with "gpios" suffix and Linux gpiolib
already handles both names, so switch to preferred one.

Link: https://lore.kernel.org/r/20230208172634.404452-3-krzysztof.kozlowski@linaro.org


Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

The GPIOs properties should end with "gpios" suffix and Linux gpiolib
already handles both names, so switch to preferred one.

Link: https://lore.kernel.org/r/20230208172634.404452-2-krzysztof.kozlowski@linaro.org


Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

The GPIOs properties should end with "gpios" suffix and Linux gpiolib
already handles both names, so switch to preferred one.

While touching the lines, replace open-coded GPIO_ACTIVE_HIGH flag.

Tested-by: Henrik Grimler <henrik@grimler.se>
Link: https://lore.kernel.org/r/20230208172634.404452-1-krzysztof.kozlowski@linaro.org


Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

SPI NOR flash compatible should come with generic jedec,spi-nor fallback
and proper vendor prefix:

  exynos5250-smdk5250.dtb: /soc/spi@12d30000/flash@0: failed to match any schema with compatible: ['w25x80']

Link: https://lore.kernel.org/r/20230208164942.387390-2-krzysztof.kozlowski@linaro.org


Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

SPI NOR flash compatible should come with generic jedec,spi-nor fallback
and proper vendor prefix:

  exynos4210-smdkv310.dtb: /soc/spi@13940000/flash@0: failed to match any schema with compatible: ['w25x80']

Link: https://lore.kernel.org/r/20230208164942.387390-1-krzysztof.kozlowski@linaro.org


Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

I2C10 is represented as i2c-gpio device, thus it is not really a part of
soc MMIO bus:

  exynos5250-arndale.dtb: soc: i2c-10: {'pinctrl-names': ['default'], ... } should not be valid under {'type': 'object'}

Link: https://lore.kernel.org/r/20230207210020.677007-7-krzysztof.kozlowski@linaro.org


Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

I2C10 does not have any children because it is used in HDMI DDC, so drop
redundant address/size-cells.

Link: https://lore.kernel.org/r/20230207210020.677007-6-krzysztof.kozlowski@linaro.org


Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

status=okay is by default for new nodes.

Link: https://lore.kernel.org/r/20230207210020.677007-5-krzysztof.kozlowski@linaro.org


Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

The "status" is a reserved keyword and LED nodes should have generic
prefix:

  exynos4210-origen.dtb: leds: status: {'gpios': [[76, 3, 1]],
    'function': ['heartbeat'], 'linux,default-trigger': ['heartbeat']} is not of type 'array'

Link: https://lore.kernel.org/r/20230207210020.677007-4-krzysztof.kozlowski@linaro.org


Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

Add device tree file for sam9x60 curiosity board.

Signed-off-by: Durai Manickam KR <durai.manickamkr@microchip.com>
Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Link: https://lore.kernel.org/r/20230207110651.197268-9-durai.manickamkr@microchip.com

Adding the sam9x60 curiosity board from Microchip into the atmel AT91 board
description yaml file.

Signed-off-by: Durai Manickam KR <durai.manickamkr@microchip.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Link: https://lore.kernel.org/r/20230207110651.197268-8-durai.manickamkr@microchip.com

Added the missing flexcom functions for all the flexcom nodes.

Signed-off-by: Manikandan Muralidharan <manikandan.m@microchip.com>
[durai.manickamkr@microchip.com: added missing UART compatibles]
Signed-off-by: Durai Manickam KR <durai.manickamkr@microchip.com>
Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Link: https://lore.kernel.org/r/20230207110651.197268-7-durai.manickamkr@microchip.com

Add dma bindings for flexcom nodes in the soc dtsi file. Users those who
don't wish to use the DMA function for their flexcom functions can
overwrite the dma bindings in the board device tree file.

Signed-off-by: Manikandan Muralidharan <manikandan.m@microchip.com>
[durai.manickamkr@microchip.com: fixed code indentation and updated commit log]
Signed-off-by: Durai Manickam KR <durai.manickamkr@microchip.com>
Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Link: https://lore.kernel.org/r/20230207110651.197268-6-durai.manickamkr@microchip.com

The UART submodule in Flexcom has 16-byte Transmit and Receive FIFOs.

Signed-off-by: Manikandan Muralidharan <manikandan.m@microchip.com>
Signed-off-by: Durai Manickam KR <durai.manickamkr@microchip.com>
Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Link: https://lore.kernel.org/r/20230207110651.197268-5-durai.manickamkr@microchip.com

The ranges, #address-cells and #size-cells properties are not required,
remove them from the spi4 node.

Signed-off-by: Durai Manickam KR <durai.manickamkr@microchip.com>
Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Link: https://lore.kernel.org/r/20230207110651.197268-4-durai.manickamkr@microchip.com

Move the flexcom definitions from board specific DTS file
to the SoC specific DTSI file for sam9x60ek.

[durai.manickamkr@microchip.com: Logical split-up of this patch and added
 missing UART5 compatibles]

Signed-off-by: Manikandan Muralidharan <manikandan.m@microchip.com>
Signed-off-by: Hari Prasath Gujulan Elango <Hari.PrasathGE@microchip.com>
Signed-off-by: Durai Manickam KR <durai.manickamkr@microchip.com>
Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Link: https://lore.kernel.org/r/20230207110651.197268-3-durai.manickamkr@microchip.com

Fixed the label numbering of the flexcom functions so that all
13 flexcom functions of sam9x60 are in the following order when the missing
flexcom functions are added:

flx0: uart0, spi0, i2c0
flx1: uart1, spi1, i2c1
flx2: uart2, spi2, i2c2
flx3: uart3, spi3, i2c3
flx4: uart4, spi4, i2c4
flx5: uart5, spi5, i2c5
flx6: uart6, i2c6
flx7: uart7, i2c7
flx8: uart8, i2c8
flx9: uart9, i2c9
flx10: uart10, i2c10
flx11: uart11, i2c11
flx12: uart12, i2c12

Signed-off-by: Manikandan Muralidharan <manikandan.m@microchip.com>
Signed-off-by: Durai Manickam KR <durai.manickamkr@microchip.com>
Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Link: https://lore.kernel.org/r/20230207110651.197268-2-durai.manickamkr@microchip.com

Merge tag 'socfpga_dts_updates_for_v6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux into arm/dt

SoCFPGA dts updates for v6.3
- Align UART node with bindings
- Add pinctrl properties for Stratix10/Agilex
- Change address-cells to 2 to support 64-bit address for fpga region

* tag 'socfpga_dts_updates_for_v6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux:
  arm64: dts: socfpga: change address-cells to support 64-bit addressing
  arm64: dts: stratix10: add i2c pins for pinctrl
  arm64: dts: add pinctrl-single property for Stratix10/Agilex
  ARM: dts: socfpga: align UART node name with bindings

Link: https://lore.kernel.org/r/20230206162425.311593-1-dinguyen@kernel.org


Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'ti-k3-dt-for-v6.3' of https://git.kernel.org/pub/scm/linux/kernel/git/ti/linux into arm/dt

TI K3 device tree updates for v6.3

New features:
J784S4 SoC and EVM support
AM68 and AM69 StarterKit, phyBOARD-Electra-AM642, Siemens IoT2050 M.2
AM62A7 SK additional peripherals
AM62 SK USB support

Non critical fixes
AM62:
McSPI Clock ID fixes
MMC TAP value updates
J7200:
pinmux range update
All:
Cache DT node fixes

Cleanups:
Reorder dts Makefile entries alphabetically

* tag 'ti-k3-dt-for-v6.3' of https://git.kernel.org/pub/scm/linux/kernel/git/ti/linux: (25 commits)
  arm64: dts: ti: Makefile: Rearrange entries alphabetically
  arch: arm64: dts: Add support for AM69 Starter Kit
  dt-bindings: arm: ti: Add binding for AM69 Starter Kit
  arm64: dts: ti: iot2050: Add support for M.2 variant
  dt-bindings: arm: ti: Add binding for Siemens IOT2050 M.2 variant
  arm64: dts: ti: iot2050: Add layout of OSPI flash
  arm64: dts: ti: k3-j7200: Fix wakeup pinmux range
  arm64: dts: ti: k3-am68-sk: Add support for AM68 SK base board
  arm64: dts: ti: Add initial support for AM68 SK System on Module
  dt-bindings: arm: ti: Add binding for AM68 SK
  arm64: dts: Update cache properties for ti
  arm64: dts: ti: Add support for phyBOARD-Electra-AM642
  dt-bindings: arm: ti: Add bindings for PHYTEC AM64x based hardware
  arm64: dts: ti: k3-am62a7-sk: Enable USB1 node
  arm64: dts: ti: k3-am62a7-sk: Enable ethernet port
  arm64: dts: ti: k3-am62a-main: Add more peripheral nodes
  arm64: dts: ti: k3-am62a-mcu: Add MCU domain peripherals
  arm64: dts: ti: Add support for J784S4 EVM board
  arm64: dts: ti: Add initial support for J784S4 SoC
  dt-bindings: pinctrl: k3: Introduce pinmux definitions for J784s4
  ...

Link: https://lore.kernel.org/r/642cf238-43e5-d6fa-68b5-a9dfbc0277bf@ti.com


Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'mvebu-dt64-6.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/gclement/mvebu into arm/dt

mvebu dt64 for 6.3 (part 1)

Do not use anymore "marvell,armada3710" compatible string for the
Armada 3720 boards.

* tag 'mvebu-dt64-6.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/gclement/mvebu:
  arm64: dts: marvell: Fix compatible strings for Armada 3720 boards

Link: https://lore.kernel.org/r/87zg9w9j6l.fsf@BL-laptop


Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'mvebu-dt-6.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/gclement/mvebu into arm/dt

mvebu dt for 6.3 (part 1)

Fix errors reported by dtbs_check on dove boards

* tag 'mvebu-dt-6.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/gclement/mvebu:
  ARM: dts: dove.dtsi: Move ethphy to fix schema error

Link: https://lore.kernel.org/r/87357oaxs0.fsf@BL-laptop


Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'stm32-dt-for-v6.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32 into arm/dt

STM32 DT for v6.3, round 1

Highlights:
----------

- MPU:
  - ST boards:
    - Add following peripherals support on stm32mp13:
      i2s, SAI, SPDIFRX, DFSDM, Timers
    - Add timers support on stm32mp135f-dk board.
    - Add decicated BSEC compatible on STM32MP13.
    - Rename sound card on STM32MP15 DKx.
    - Fix yaml validation issues.

* tag 'stm32-dt-for-v6.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32:
  ARM: dts: stm32: fix compatible for BSEC on STM32MP13
  ARM: dts: stm32: Update part number NVMEM description on stm32mp131
  ARM: dts: stm32: Use new media bus type macros
  ARM: dts: stm32: Fix User button on stm32mp135f-dk
  ARM: dts: stm32: add timers support on stm32mp135f-dk
  ARM: dts: stm32: add timer pins muxing for stm32mp135f-dk
  ARM: dts: stm32: add timers support on stm32mp131
  ARM: dts: stm32: add dfsdm node on stm32mp131
  ARM: dts: stm32: add spdifrx node on stm32mp131
  ARM: dts: stm32: add sai nodes on stm32mp131
  ARM: dts: stm32: add i2s nodes on stm32mp131
  ARM: dts: stm32: Remove the pins-are-numbered property
  ARM: dts: stm32: rename sound card on stm32mp15xx-dkx
  ARM: dts: stm32: remove sai kernel clock on stm32mp15xx-dkx
  ARM: dts: stm32: Fix qspi pinctrl phandle for stm32mp151a-prtt1l
  ARM: dts: stm32: Fix qspi pinctrl phandle for stm32mp157c-emstamp-argon
  ARM: dts: stm32: Fix qspi pinctrl phandle for stm32mp15xx-dhcom-som
  ARM: dts: stm32: Fix qspi pinctrl phandle for stm32mp15xx-dhcor-som

Link: https://lore.kernel.org/r/3e815504-e85e-cbd3-6e6d-4e5a7aa7469a@foss.st.com


Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'v6.3-rockchip-dts32-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into arm/dt

Two new 32bit SoC were added, the rv1126 and rk3128.

New boards are thr rk3128-eval-board, and a number of rv1126-based compute
modules from Edgeble AI.

Also included are some dt-binding improvements with relevant Acks from
maintainers when the changes touch these areas.

* tag 'v6.3-rockchip-dts32-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
  dt-bindings: phy: rename phy-rockchip-inno-usb2.yaml
  dt-bindings: soc: rockchip: grf: add rockchip,rk3288-dp-phy.yaml
  dt-bindings: phy: rockchip: convert rockchip-dp-phy.txt to yaml
  ARM: dts: rockchip: Enable Ethernet on rv1126 Neu2-IO
  ARM: dts: rockchip: Add Ethernet GMAC node for RV1126
  ARM: dts: rockchip: Add ethernet rgmiim1 pin-control for rv1126
  dt-bindings: arm: rockchip: Add Edgeble Neural Compute Module 6
  ARM: dts: rockchip: add brcmf node to rk3066a-mk808
  ARM: dts: rockchip: add space between label and nodename nfc pinctrl on rk3128
  ARM: dts: rockchip: add rk3128-evb
  ARM: dts: rockchip: add rk3128 soc dtsi
  dt-bindings: arm: rockchip: Add Rockchip RK3128 Evaluation board
  ARM: dts: rockchip: Add Edgeble Neural Compute Module 2(Neu2) IO board
  ARM: dts: rockchip: Add Edgeble RV1126 Neural Compute Module 2(Neu2)
  dt-bindings: arm: rockchip: Add Edgeble Neural Compute Module 2
  dt-bindings: vendor-prefixes: Add Edgeble AI Technologies Pvt. Ltd.
  ARM: dts: rockchip: Add Rockchip RV1126 SoC
  ARM: dts: rockchip: Add Rockchip RV1126 pinctrl
  dt-bindings: arm: rockchip: Add pmu compatible for rv1126

Link: https://lore.kernel.org/r/5651506.31r3eYUQgx@phil


Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'v6.3-rockchip-dts64-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into arm/dt

New SoC supported is the rk3588.

New boards rk3588-evb1, EmbedFire Lubancat 1+2 (based on different SoCs),
a number of Radxa boards (rock-5a and -5b, compute module 3, cm3i e25),
OrangePi R1 plus and the Edgeble Neu6 SoM and baseboard.

A number of improvements for the Odroid Go (and its clones) including
touchscreen and display support, led and audio changes.

As well as some improvements for the rk356x, better gpu thermal values for
px30 and some minor improvement for rock3a, rock5a, rk3566-demo,
roc-rk3399-pc and bi-r2pro.

* tag 'v6.3-rockchip-dts64-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: (46 commits)
  arm64: dts: rockchip: Correct the model name for Radxa E25
  arm64: dts: rockchip: Drop unneeded model for Radxa CM3i
  arm64: dts: rockchip: Add missing CM3i fallback compatible for Radxa E25
  arm64: dts: rockchip: Fix compatible for Radxa CM3
  arm64: dts: rockchip: rk3566: Enable WiFi, BT support for Radxa CM3
  arm64: dts: rockchip: Enable Ethernet for Radxa CM3 IO
  arm64: dts: rockchip: add display to RG503
  arm64: dts: rockchip: add pinctrls for 16-bit/18-bit rgb interface to rk356x
  arm64: dts: rockchip: Update eMMC, SD aliases for Radxa SBC boards
  arm64: dts: rockchip: Update eMMC, SD aliases for Radxa SoM boards
  arm64: dts: rockchip: Add Radxa Compute Module 3 IO board
  arm64: dts: rockchip: Add rk3566 based Radxa Compute Module 3
  dt-bindings: arm: rockchip: Add Radxa Compute Module 3
  arm64: dts: rockchip: Fix RX delay for ethernet phy on rk3588s-rock5a
  arm64: dts: rockchip: add Hynitron cst340 for Anbernic 353 series
  arm64: dts: rockchip: Enable wifi module AP6398s for rk3566 box demo
  arm64: dts: rockchip: rk3588: Add Edgeble Neu6 Model A IO
  arm64: dts: rockchip: rk3588: Add Edgeble Neu6 Model A SoM
  arm64: dts: rockchip: fix hdmi cec on rock-3a
  arm64: dts: rockchip: assign rate to clk_rtc_32k on rk356x
  ...

Link: https://lore.kernel.org/r/6491956.DvuYhMxLoT@phil


Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'v6.2-next-dts64' of https://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux into arm/dt

mt7986:
- add USB host support
- add support for mmc, pcie
- add support for Bananpi R3

mt8173:
- switch to SMC watchdog for Acer Chromebook R13
- move panel under aux bus

mt8183:
- support detachable keyboards on kukui based Chromebooks
- describe 13 MHz clock correctly
- complete CPU cache information

mt8186:
- Add pm-domains, iommu, dsi
- describe 13 MHz clock correctly
- complete CPU cache information
- add crypto support for the eMMC
- add audio controler, DPI and ADSP mailbox support
- describe CPUs as a single cluster

mt8192:
- describe 13 MHz clock correctly
- complete CPU cache information
- enable display regulators, backlight, internal display and audio on
  Acer Chromebook 514
- describe CPUs as a single cluster

mt8195:
- Add power domain to t-phy
- describe 13 MHz clock correctly
- complete CPU cache information
- enable audio for Acer Chromebook Spin 513
- add ethernet support for the demo board
- add JPG enconder and decoder device
- describe CPUs as a single cluster

Smaller changes for mt6795, mt7622, mt8516 and mt6358.

* tag 'v6.2-next-dts64' of https://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux: (58 commits)
  arm64: dts: mediatek: mt8516: Fix the watchdog node name
  arm64: dts: mediatek: mt7986: Fix watchdog compatible
  arm64: dts: mediatek: mt8195: Fix watchdog compatible
  arm64: dts: mediatek: mt8186: Fix watchdog compatible
  arm64: dts: mt8173-elm: Switch to SMC watchdog
  arm64: dts: mediatek: mt7622: Add missing pwm-cells to pwm node
  arm64: dts: mt8192: Change idle states names to reflect actual function
  arm64: dts: mt8186: Change idle states names to reflect actual function
  arm64: dts: mt8195: Change idle states names to reflect actual function
  arm64: dts: mt8186: Fix CPU map for single-cluster SoC
  arm64: dts: mt8192: Fix CPU map for single-cluster SoC
  arm64: dts: mt8195: Fix CPU map for single-cluster SoC
  arm64: dts: mt8195: add jpeg decode device node
  arm64: dts: mt8195: add jpeg encode device node
  arm64: dts: mediatek: mt8183: drop double interrupts
  arm64: dts: mediatek: mt7622: drop serial clock-names
  arm64: dts: mt8195: Add efuse node to mt8195
  arm64: dts: mt8183: jacuzzi: Move panel under aux-bus
  arm64: dts: mediatek: mt8173-elm: Move display to ps8640 auxiliary bus
  arm64: dts: mt8195: Add Ethernet controller
  ...

Link: https://lore.kernel.org/r/2eefe6d4-6ca3-dc5f-6a04-f4f3c49692dd@gmail.com


Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'v6.2-next-dts32' of https://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux into arm/dt

Clean ups only:
- deleting unsused pins-are-numbered property
- not existing second IRQ

* tag 'v6.2-next-dts32' of https://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux:
  ARM: dts: mediatek: Remove pins-are-numbered property
  arm: dts: mt7629: Remove extra interrupt from timer node

Link: https://lore.kernel.org/r/17aee808-1f3f-fe75-68d4-adb71915e5cb@gmail.com


Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Use the correct compatible for stm32mp13 support.

The BSEC driver for STM32MP15x is not compatible with STM32MP13x. For
example the proprietary's smc STM32_SMC_BSEC is not supported in
STM32MP13x OP-TEE, it is replaced by SM32MP BSEC Pseudo Trusted
Application in OP-TEE to access to the secured IP BSEC on STM32MP13X SoC.

The correct compatible is already used in U-Boot and in upstream is in
progress for OP-TEE device tree.

As the SoC STM32MP13X is not yet official and it is not available
outside STMicroelectronics, it is the good time to break the DTS
compatibility and to correct the error done in the introduction of
STM32MP131.

Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Reviewed-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>