- May 24, 2010
-
-
Randy Dunlap authored
When CONFIG_ACPI_BUTTON=m (and probably when ACPI_BUTTON is not enabled) and NOUVEAU is built-in (not as a loadable module): nouveau_connector.c:(.text+0xe17ce): undefined reference to `acpi_lid_open' Signed-off-by:
Randy Dunlap <randy.dunlap@oracle.com> Acked-by:
Ben Skeggs <bskeggs@redhat.com> Signed-off-by:
Dave Airlie <airlied@redhat.com>
-
Jerome Glisse authored
I think it's good to release the AGP bridge at suspend and reacquire it at resume. Also fix : https://bugzilla.kernel.org/show_bug.cgi?id=15969 Signed-off-by:
Jerome Glisse <jglisse@redhat.com> Cc: stable <stable@kernel.org> Signed-off-by:
-
- May 21, 2010
-
-
Alex Deucher authored
This saves some more power at the expense of performance. Signed-off-by:
Alex Deucher <alexdeucher@gmail.com> Signed-off-by:
-
Dave Airlie authored
* nouveau/for-airlied: drm/nouveau: fix i2c-related init table handlers drm/nouveau: support init table i2c device identifier 0x81 drm/nouveau: ensure we've parsed i2c table entry for INIT_*I2C* handlers drm/nouveau: display error message for any failed init table opcode drm/nouveau: fix init table handlers to return proper error codes drm/nv50: support fractional feedback divider on newer chips drm/nv50: fix monitor detection on certain chipsets drm/nv50: store full dcb i2c entry from vbios drm/nv50: fix suspend/resume with DP outputs drm/nv50: output calculated crtc pll when debugging on drm/nouveau: dump pll limits entries when debugging is on drm/nouveau: bios parser fixes for eDP boards drm/nouveau: fix a nouveau_bo dereference after it's been destroyed drm/nv40: remove some completed ctxprog TODOs drm/nv04: Implement missing nv04 PGRAPH methods in software. drm/nouveau: Use 0x5f instead of 0x9f as imageblit on original NV10.
-
Dave Airlie authored
radeon needs power supply to get correct PM info so select it at the radeon level not at the kms option. Signed-off-by: -
Jerome Glisse authored
list reservation was too optimistic about ttm object reservation and could think that an object reserved by some other process as reserved by the list reservation which was false. Thus when unreserving the list it might unreserve object that it didn't reserved in the list. Sorry if it's hard to follow but this kind of things are just causing headheck. Signed-off-by:
-
Michel Dänzer authored
Fixes AGP initialization failure with Apple UniNorth bridges due to trying to ioremap() normal RAM. Signed-off-by:
Michel Dänzer <daenzer@vmware.com> Signed-off-by:
-
Alex Deucher authored
Seems to cause issues with the sound hardware. Fixes kernel bug 15982: https://bugzilla.kernel.org/show_bug.cgi?id=15982 Signed-off-by:
-
Alex Deucher authored
Spotted by Scott Bertilson. Fixes fdo bug 28146. Signed-off-by:
Mark Marshall <mark.marshall@csr.com> Signed-off-by:
-
- May 19, 2010
-
-
Ben Skeggs authored
Mutliple issues. INIT_ZM_I2C_BYTE/INIT_I2C_BYTE didn't even try and use the register value, and all the handlers were using the wrong slave address. Signed-off-by: -
Ben Skeggs authored
It appears to be meant to reference the second "default index". Signed-off-by: -
Ben Skeggs authored
We may not have parsed the entry yet if the i2c_index is for an i2c bus that's not referenced by a DCB encoder. This could be done oh so much more nicely, except we have to care about prehistoric DCB tables too, and they make life painful. Signed-off-by: -
Ben Skeggs authored
Some handlers don't report specific errors, but we still *really* want to know if we failed to parse a complete init table. Signed-off-by: -
Ben Skeggs authored
We really want to be able to distinguish between INIT_DONE and an actual error sometimes. This commit fixes up several lazy "return 0;" to be actual error codes, and explicitly reserves "0" as "success, but stop parsing this table". Signed-off-by: -
Ben Skeggs authored
Signed-off-by: -
Ben Skeggs authored
There appears to be some kind of switch on certain chips to control whether the DP auxch or traditional i2c bus will be operational on a connector, this commit hopefully fixes nouveau to do the right thing. Likely only relevent on chips with DP outputs. Signed-off-by: -
Ben Skeggs authored
Signed-off-by: -
Ben Skeggs authored
Signed-off-by: -
Ben Skeggs authored
Signed-off-by: -
Ben Skeggs authored
Signed-off-by: -
Ben Skeggs authored
Signed-off-by: -
Ben Skeggs authored
Signed-off-by: -
Ben Skeggs authored
I actually thought these were gone already when the initial commit was done.. I guess not! Signed-off-by: -
Marcin Kościelnicki authored
Signed-off-by:
Marcin Kościelnicki <koriakin@0x04.net> Signed-off-by:
-
Marcin Kościelnicki authored
Signed-off-by:
-
Dave Airlie authored
Reported-by: Dan Carpenter Signed-off-by: -
Alex Deucher authored
- Use radeon hpd enum consistently (in both hotplug and dp) - Legacy r100 with DVI should be HPD_1 not NONE Signed-off-by:
-
Alex Deucher authored
Some LVDS connectors don't have a ddc bus, so reset the ddc bus to invalid before parsing the next connector to avoid using stale ddc bus data. Should fix fdo bug 28164. Signed-off-by:
-
Ben Hutchings authored
The current initialisation code probes 'unsupported' AGP devices simply by calling its own probe function. It does not lock these devices or even check whether another driver is already bound to them. We must use the device core to manage this. So if the specific device id table didn't match anything and agp_try_unsupported=1, switch the device id table and call driver_attach() again. Signed-off-by:
Ben Hutchings <ben@decadent.org.uk> Signed-off-by:
-
Ben Hutchings authored
SIS 760 is listed in the device tables for both amd64-agp and sis-agp. amd64-agp is apparently preferable since it has workarounds for some BIOS misconfigurations that sis-agp doesn't handle. Signed-off-by:
-
Dave Airlie authored
* anholt/drm-intel-next: (515 commits) drm/i915: Fix out of tree builds drm/i915: move fence lru to struct drm_i915_fence_reg drm/i915: don't allow tiling changes on pinned buffers v2 drm/i915: Be extra careful about A/D matching for multifunction SDVO drm/i915: Fix DDC bus selection for multifunction SDVO drm/i915: cleanup mode setting before unmapping registers drm/i915: Make fbc control wrapper functions drm/i915: Wait for the GPU whilst shrinking, if truly desperate. drm/i915: Use spatio-temporal dithering on PCH [MTD] Remove zero-length files mtdbdi.c and internal.ho pata_pcmcia / ide-cs: Fix bad hashes for Transcend and kingston IDs libata: Fix several inaccuracies in developer's guide slub: Fix bad boundary check in init_kmem_cache_nodes() raid6: fix recovery performance regression KEYS: call_sbin_request_key() must write lock keyrings before modifying them KEYS: Use RCU dereference wrappers in keyring key type code KEYS: find_keyring_by_name() can gain access to a freed keyring ALSA: hda: Fix 0 dB for Packard Bell models using Conexant CX20549 (Venice) ALSA: hda - Add quirk for Dell Inspiron 19T using a Conexant CX20582 ALSA: take tu->qlock with irqs disabled ...
-
- May 18, 2010
-
-
Dave Airlie authored
print an error if these fail. Signed-off-by: -
Alex Deucher authored
This patch is a combination of the previous two profile patches, but without the index bugs. It cleans up and fixes some issues with pm profile setup on r6xx chips. Some tables have different orderings for the power states, also, r600 only has 1 clock mode per power state. On desktop cards there are no battery modes, so the low and high power states are the same. For the low profile case, choose the lower clock mode. Signed-off-by:
-
Alex Deucher authored
Signed-off-by:
-
Alex Deucher authored
- Separate dynpm and profile based power management methods. You can select the pm method by echoing the selected method ("dynpm" or "profile") to power_method in sysfs. - Expose basic 4 profile in profile method "default" - default clocks "auto" - select between low and high based on ac/dc state "low" - DC, low power mode "high" - AC, performance mode The current base profile is "default", but it should switched to "auto" once we've tested on more systems. Switching the state is a matter of echoing the requested profile to power_profile in sysfs. The lowest power states are selected automatically when dpms turns the monitors off in all states but default. - Remove dynamic fence-based reclocking for the moment. We can revisit this later once we have basic pm in. - Move pm init/fini to modesetting path. pm is tightly coupled with display state. Make sure display side is initialized before pm. - Add pm suspend/resume functions to make sure pm state is properly reinitialized on resume. - Remove dynpm module option. It's now selectable via sysfs. Signed-off-by: -
Alex Deucher authored
The lowest power states often cause display problems, so only enable them when all displays are off. Signed-off-by:
-
Alex Deucher authored
Signed-off-by:
-
Matthew Garrett authored
GUI idle interrupts don't seem to work terribly well on r500 and earlier, so let's use a fence instead. Signed-off-by:
Matthew Garrett <mjg@redhat.com> Signed-off-by:
-
Matthew Garrett authored
We need to handle the ring while we've already locked it, so split out the allocation and commit functions in order to allow them to be used. Signed-off-by:
-
Alex Deucher authored
voltage drop, dynamic voltage, dynamic sclk, pcie lane adjust, etc, Signed-off-by:
-
