- Feb 11, 2021
-
-
Arnd Bergmann authored
Merge tag 'aspeed-5.12-devicetree' of git://git.kernel.org/pub/scm/linux/kernel/git/joel/aspeed into arm/dt ASPEED device tree updates for 5.12 - New machines * Ampere Mt. Jade, an AST2500 BMC for an x86 server * IBM Everest, an AST2600 BMC for a Power10 server * Supermicro x11spi, an AST2500 BMC for an ARM server - AST2600 eMMC clock phase configuration - Proper clock support for LPC snoop - Misc updates to ethanolx, mowgli, ast2600evb, g220a, and rainier * tag 'aspeed-5.12-devicetree' of git://git.kernel.org/pub/scm/linux/kernel/git/joel/aspeed: ARM: dts: aspeed: ast2600evb: Add enable ehci and uhci ARM: dts: aspeed: mowgli: Add i2c rtc device ARM: dts: aspeed: amd-ethanolx: Enable secondary LPC snooping address ARM: dts: aspeed: Add Everest BMC machine ARM: dts: aspeed: inspur-fp5280g2: Add ipsps1 driver ARM: dts: aspeed: inspur-fp5280g2: Add GPIO line names ARM: dts: aspeed: Add Supermicro x11spi BMC machine ARM: dts: aspeed: g220a: Fix some gpio ARM: dts: aspeed: g220a: Enable ipmb ARM: dts: aspeed: rainier: Add eMMC clock phase compensation ARM: dts: aspeed: Add LCLK to lpc-snoop ARM: dts: aspeed: Add device tree for Ampere's Mt. Jade BMC Link: https://lore.kernel.org/r/CACPK8XfQgGch5bK3YD0La+CE2L5DxVa1MNw6m1fc40j0w7e9Tw@mail.gmail.com Signed-off-by:
Arnd Bergmann <arnd@arndb.de>
-
- Feb 10, 2021
-
-
Ryan Chen authored
Signed-off-by:
Ryan Chen <ryan_chen@aspeedtech.com> Link: https://lore.kernel.org/r/20201009024937.11246-4-ryan_chen@aspeedtech.com Signed-off-by:
Joel Stanley <joel@jms.id.au>
-
Ben Pai authored
This system uses a rx8900 compatible rtc device. Signed-off-by:
Ben Pai <Ben_Pai@wistron.com> Link: https://lore.kernel.org/r/20210121073146.28217-1-Ben_Pai@wistron.com Signed-off-by:
-
Konstantin Aladyshev authored
AMD EthanolX CRB uses 2-byte POST codes which are sent to ports 0x80/0x81. Currently ASPEED controller snoops only 0x80 port and therefore captures only the lower byte of each POST code. Enable secondary LPC snooping address to capture the higher byte of POST codes. Signed-off-by:
Konstantin Aladyshev <aladyshev22@gmail.com> Reviewed-by:
Andrew Jeffery <andrew@aj.id.au> Link: https://lore.kernel.org/r/20210127182326.424-1-aladyshev22@gmail.com Signed-off-by:
-
Arnd Bergmann authored
Merge tag 'v5.12-rockchip-dts64-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into arm/dt New boards: Radxa Rock Pi E, NanoPi M4B More fixed indices for mmc nodes; removal of obsolete amba bus nodes; nand-flash-controller nodes for px30 and rk3308; rk3399 pcie ranges fix; board-level fixes for Helios64, NanoPi and Rock960; more sound support for rock64 and rockpro64 and cleanups to make dt-bindings happier. * tag 'v5.12-rockchip-dts64-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: (24 commits) arm64: dts: rockchip: more user friendly name of sound nodes arm64: dts: rockchip: rename pinctrl nodename to gmac2io for nanopi-r2s board arm64: dts: rockchip: assign a fixed index to mmc devices on rk3368 boards arm64: dts: rockchip: assign a fixed index to mmc devices on rk3308 boards arm64: dts: rockchip: assign a fixed index to mmc devices on px30 boards arm64: dts: rockchip: cleanup cpu_thermal node of rk3399-rock960.dts arm64: dts: rockchip: Remove bogus "amba" bus nodes arm64: dts: rockchip: Light "sys" LED on NanoPi R2S arm64: dts: rockchip: fix ranges property format for rk3399 pcie node arm64: dts: rockchip: Rely on SoC external pull up on pmic-int-l on Helios64 arm64: dts: rockchip: Add NanoPi M4B board arm64: dts: rockchip: Move ep-gpios property to nanopc-t4 from nanopi4 arm64: dts: rockchip: Add NFC node for PX30 SoC arm64: dts: rockchip: Add NFC node for RK3308 SoC arm64: dts: rockchip: rk3328: Add Radxa ROCK Pi E dt-bindings: arm: rockchip: Add Radxa ROCK Pi E arm64: dts: rockchip: rk3328: Add clock_in_out property to gmac2phy node arm64: dts: rockchip: rename thermal subnodes for rk3399 arm64: dts: rockchip: rename thermal subnodes for rk3368 arm64: dts: rockchip: add SPDIF node for rk3399-rockpro64 ... Link: https://lore.kernel.org/r/12699743.uLZWGnKmhe@phil Signed-off-by:
-
Arnd Bergmann authored
Merge tag 'v5.12-rockchip-dts32-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into arm/dt Fixed indices for mmc nodes; removal of obsolete amba bus nodes; addition of nand flash controller odes to rk3036, rk2928, rv1108; gpu node for rk3288-miqi and some cleanups to make dtbscheck happier. * tag 'v5.12-rockchip-dts32-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: ARM: dts: rockchip: assign a fixed index to mmc devices on rv1108 boards ARM: dts: rockchip: assign a fixed index to mmc devices on rk322x boards ARM: dts: rockchip: Remove bogus "amba" bus nodes ARM: dts: rockchip: Add NFC node for RK3036 SoC ARM: dts: rockchip: Add NFC node for RK2928 and other SoCs ARM: dts: rockchip: Add NFC node for RV1108 SoC ARM: dts: rockchip: rename thermal subnodes for rk3288 ARM: dts: rockchip: add QoS register compatibles for rk3288 ARM: dts: rockchip: add QoS register compatibles for rk3066/rk3188 ARM: dts: rockchip: add gpu node to rk3288-miqi Link: https://lore.kernel.org/r/2184150.ElGaqSPkdT@phil Signed-off-by:
-
Arnd Bergmann authored
Merge tag 'actions-arm-dt-for-v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/mani/linux-actions into arm/dt Actions Semi ARM DT changes for v5.12: Updates to the existing S500 ARM SoC. Support has been added for CMU (Clock Management Unit), Reset controller, DMA, Pinctrl/GPIO, MMC, I2C and SIRQ (interrupt controller). Since the CMU support is added, the dummy fixed clock used for the UART controller has been removed for all S500 based boards and proper UART clock from CMU is used. Added uSD support and I2C pinctrl configuration for Roseapplepi board based on S500 SoC. This will make the board boot mainline with a distro from uSD card. The I2C pinctrl config is added specifically for the PMIC which is currently under review. * tag 'actions-arm-dt-for-v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/mani/linux-actions: arm: dts: owl-s500-roseapplepi: Add I2C pinctrl configuration arm: dts: owl-s500-roseapplepi: Add uSD support arm: dts: owl-s500: Add SIRQ controller arm: dts: owl-s500: Add I2C support arm: dts: owl-s500: Add MMC support arm: dts: owl-s500: Add pinctrl & GPIO support arm: dts: owl-s500: Add DMA controller arm: dts: owl-s500: Add Reset controller arm: dts: owl-s500: Set CMU clocks for UARTs arm: dts: owl-s500: Add Clock Management Unit Link: https://lore.kernel.org/r/20210205050346.GA7619@thinkpad Signed-off-by:
-
Arnd Bergmann authored
Merge tag 'imx-dt64-5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/dt i.MX arm64 device tree update for 5.12: - New board support: Beacon i.MX8M Nano development kit, i.MX8MM Nitrogen, Gateworks i.MX 8M Mini Development Kits, phyBOARD-Pollux-i.MX8MP, Librem5 Evergreen. - Update imx8mm-beacon to drop unused clock-names reference, and add more pinctrl states for USDHC1. - Support soc unique ID read with NVMEM on i.MX8M SoCs. - A series from Biwen Li to add interrupt line for RTC device on Layerscape SoCs. - A couple of patch sets to update imx8mq-librem5 support around regulators, RTC, charger, display, etc. - A series from Joakim Zhang to improve i.MX8M FEC device configuration. - A series from Kuldeep Singh to enable flexcan support for LX2160A and LS1028A. - A series from Lucas Stach to update ZII devices around audio, USB, I2C pin configuration and UCS1002 ALERT. - A series from Michael Walle to update Layerscape device trees to use constants in the clockgen phandle, add sl28 variant 1 and enable SATA. - A few patches from Russell King to improve support for a couple of LX2160A boards. - A series from Shengjiu Wang to add more audio support for imx8mn-evk. - Other small and random updates. * tag 'imx-dt64-5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (71 commits) arm64: dts: imx: Add i.mx8mm nitrogen basic dts support arm64: dts: zii-rmb3: enable RMI4 reduced reporting arm64: dts: zii-ultra: only trigger IRQ on falling edge ucs1002 ALERT pin arm64: dts: zii-ultra: limit USB ports to USB2 speed arm64: dts: zii-ultra: fix i2c pin configuration arm64: dts: zii-ultra: add sound support arm64: dts: ls1028a: Enable flexcan support for LS1028A-RDB/QDS arm64: dts: ls1028a: Update flexcan properties arm64: dts: lx2160a: Add flexcan support arm64: dts: fsl-ls1012a-frdm: add spi-uart device arm64: dts: fsl-ls1012a-rdb: add i2c devices arm64: dts: imx8mn-beacon-som: Enable QSPI on SOM arm64: dts: imx8mn: Add fspi node arm64: dts: Add Librem5 Evergreen arm64: dts: imx8mq-librem5: set regulators boot-on arm64: dts: imx8mq-librem5: enable the LCD panel arm64: dts: imx8mq-librem5: Add LCD_1V8 regulator arm64: dts: imx8mq-librem5: Add usb-c chip as supplier for the charger arm64: dts: imx8mq-librem5: Don't mark buck3 as always on arm64: dts: imx8mq-librem5: Mark charger IRQ as High-Z ... Link: https://lore.kernel.org/r/20210204120150.26186-5-shawnguo@kernel.org Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linuxArnd Bergmann authored
i.MX device tree change for 5.12: - A series from Oleksij Rempel to add i.MX6 based Plymovent, Protonic and Kverneland boards. - A series from Andreas Kemnade to improve UART support for ebook readers. - A series from Fabio Estevam to update imx6ul-14x14-evk device tree for adding GPIO expander and camera support. - A patch set from Lucas Stach to improve ZII RDU2 support, enabling WDOG, tuning I2C drive-strength, RMI4 and UCS1002 ALERT. - Other small and random updates on various boards. * tag 'imx-dt-5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (37 commits) ARM: dts: imx6: RDU2: adjust audio devices nomenclature ARM: dts: imx6: RDU2: only trigger IRQ on falling edge ucs1002 ALERT pin ARM: dts: imx6: RDU2: enable RMI4 reduced reporting ARM: dts: imx6: RDU2: reduce i2c drive-strength ARM: dts: imx6: rdu2: enable WDOG1 ARM: dts: imx6-sr-som: increase at8035 PHY gigabit Tw parameter ARM: dts: imx6: add wakeup support via magic packet firmware: imx: select SOC_BUS to fix firmware build arm64: dts: imx8mp: Correct the gpio ranges of gpio3 ARM: dts: imx6qdl-sr-som: fix some cubox-i platforms ARM: dts: imx: e60k02: add second uart ARM: dts: imx6sl-tolino-shine3: correct console uart pinmux ARM: dts: imx6sl-tolino-shine2hd: add second uart ARM: dts: imx6sl-tolino-shine2hd: correct console uart pinmux ARM: imx: build suspend-imx6.S with arm instruction set ARM: dts: imx7d-flex-concentrator: fix pcf2127 reset ARM: dts: add Kverneland TGO board ARM: dts: add Kverneland UT1, UT1Q and UT1P ARM: dts: imx6ul-14x14-evk: Add camera support ARM: dts: imx6ul-14x14-evk: Describe the KSZ8081 reset ... Link: https://lore.kernel.org/r/20210204120150.26186-4-shawnguo@kernel.org Signed-off-by:
-
Arnd Bergmann authored
Merge tag 'imx-bindings-5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/dt i.MX DT bindings update for 5.12: - Various board compatible additions to fsl.yaml. - Add vendor prefix for Plymovent and Kverneland Group. - Update simple panel bindings to include compatible for EDT and Kyocera panels. * tag 'imx-bindings-5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: dt-bindings: arm: imx: add imx8mm nitrogen support dt-bindings: arm: fsl: Add the librem 5 Evergreen revision dt-bindings: arm: fsl: add Kverneland TGO board dt-bindings: arm: fsl: add Kverneland UT1, UT1Q and UI1P boards dt-bindings: vendor-prefixes: Add an entry for Kverneland Group dt-bindings: arm: fsl: add Kontron sl28 variant 1 bindings: arm: fsl: Add PHYTEC i.MX8MP devicetree bindings dt-bindings: arm: fsl: add Protonic PRTI6G board dt-bindings: arm: fsl: add Protonic MVT board dt-bindings: arm: fsl: Add binding for Gateworks boards with IMX8MM dt-bindings: soc: imx8m: add DT Binding doc for soc unique ID dt-bindings: arm: fsl: add Plymovent BAS board dt-bindings: arm: fsl: add Plymovent M2M board dt-bindings: vendor-prefixes: Add an entry for Plymovent dt-bindings: display: simple: Add Kyocera tcg070wvlq panel dt-bindings: display: simple: add EDT compatibles already supported by the driver dt-bindings: display: simple: fix alphabetical order for EDT compatibles dt-bindings: arm: fsl: Add beacon,imx8mn-beacon-kit Link: https://lore.kernel.org/r/20210204120150.26186-3-shawnguo@kernel.org Signed-off-by:
-
Arnd Bergmann authored
Merge tag 'qcom-dts-for-5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/dt Qualcomm ARM dts updates for 5.12 Introduces the Qualcomm SDX55 platform and the platform's MTP device, with support for NAND, SDHCI and USB. USB is enabled for IPQ4019 and the Alfa Network AP120C-AC and 8devices Jalapeno boards are added. Samsung Galaxy S5 gains display and GPU support. * tag 'qcom-dts-for-5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (38 commits) ARM: dts: qcom: msm8974-klte: Mark essential regulators ARM: dts: qcom: msm8974-klte: add support for display ARM: dts: qcom: msm8974-klte: add support for GPU ARM: dts: qcom: msm8974: add gpu support ARM: dts: qcom: ipq4019: add SDHCI VQMMC LDO node ARM: dts: qcom: replace status value "ok" by "okay" ARM: dts: qcom: add additional DT labels in qcom-ipq8064.dtsi ARM: dts: qcom: remove commented mmc-ddr-1_8v for sdcc3 ARM: dts: qcom: add Alfa Network AP120C-AC ARM: dts: qcom: add 8devices Jalapeno ARM: dts: qcom: ipq4019: add more labels ARM: dts: qcom: ipq4019: add USB devicetree nodes ARM: dts: qcom: add prng definition to ipq806x ARM: dts: qcom: sdx55: Add pshold support ARM: dts: qcom: sdx55: Add Watchdog support dt-bindings: watchdog: Add binding for Qcom SDX55 ARM: dts: qcom: sdx55-mtp: Enable USB3 and PHY support ARM: dts: qcom: sdx55: Add USB3 and PHY support dt-bindings: usb: qcom,dwc3: Add binding for SDX55 ARM: dts: qcom: msm8974-klte: Fix shdc numbering ... Link: https://lore.kernel.org/r/20210204052320.388999-1-bjorn.andersson@linaro.org Signed-off-by:
-
Arnd Bergmann authored
Merge tag 'qcom-arm64-for-5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/dt Qualcomm ARM64 DT updates for 5.12 This introduces initial support for the new SM8350 platform, aka Snapdragon 888, and the MTP device for this. It adds PCIe, audio, display, GPU, HDMI watchdog, LLCC and PMIC ADC support to the SM8250 platform and RB5 in particular, as well as improve the definition of CPUs, thermal zones and fixes a few smaller issues. It introduces new Devicetree files for the Alcatel Idol 3, ASUS Zenfone 2 Laser and BQ Aquaris X5, based on the MSM8916 platform. It contains an overhaul of the existing MSM8992 and MSM8994 platform files and introduces RPM power domains and SMP2P nodes. It adds touchscreen, additional regulators, microSD card support and adds the Sony Mobile Ivy, Karin, Suzuran and Satsuki devices. It joins the common parts of the Lumia 950 and 950XL and extend these with support for sensors, NFC, bluetooth, audio, microSD and Type-C mux pins. It introduces support for the OnePlus6 and 6t, adds the missing higher frequences for the SDM850 laptops, adds CPU cluster idle support on SM8150 and a few tweaks to the SC7180 platform. * tag 'qcom-arm64-for-5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (100 commits) arm64: dts: qcom: msm8998: Use rpmpd definitions for opp table levels arm64: dts: qcom: msm8996: Add missing device_type under pcie[01] arm64: dts: qcom: sc7180: Add support for gpu fuse arm64: dts: qcom: msm8998: Disable some components by default arm64: dts: qcom: msm8998: Add capacity-dmips-mhz to CPU cores arm64: dts: qcom: msm8998: Add I2C pinctrl and fix BLSP2_I2C naming arm64: dts: qcom: msm8998: Add DMA to I2C hosts arm64: dts: qcom: msm8998: Merge in msm8998-pins.dtsi to msm8998.dtsi arm64: dts: msm8916: Fix reserved and rfsa nodes unit address arm64: dts: qcom: msm8994-octagon: Add AD7147 and APDS9930 sensors arm64: dts: qcom: msm8994-octagon: Add TAS2553 codec arm64: dts: qcom: msm8994-octagon: Add sensors on blsp1_i2c5 arm64: dts: qcom: msm8994-octagon: Add NXP NFC node arm64: dts: qcom: msm8994-octagon: Add FM Radio and DDR regulator nodes arm64: dts: qcom: msm8994-octagon: Configure PON keys arm64: dts: qcom: msm8994-octagon: Configure Lattice iCE40 FPGA arm64: dts: qcom: msm8994-octagon: Add uSD card and disable HS400 on eMMC arm64: dts: qcom: msm8994-octagon: Configure HD3SS460 Type-C mux pins arm64: dts: qcom: msm8994-octagon: Add QCA6174 bluetooth arm64: dts: qcom: msm8994-octagon: Configure regulators ... Link: https://lore.kernel.org/r/20210204052043.388621-1-bjorn.andersson@linaro.org Signed-off-by:
-
Arnd Bergmann authored
Merge tag 'amlogic-dt64-1' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic into arm/dt arm64: dts: amlogic updates for v5.12 - new board: Hardkernel ODROID-HC4 (SoC: SM1) - new board: Beelink GS-King-X (SoC: S922X) - shorten shorten audio card names for alsa compatibility - misc cleanups & fixes * tag 'amlogic-dt64-1' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic: arm64: dts: meson: add initial device-tree for ODROID-HC4 dt-bindings: arm: amlogic: add ODROID-HC4 bindings arm64: dts: meson: convert meson-sm1-odroid-c4 to dtsi arm64: dts: meson: sort Amlogic dtb Makefile dt-bindings: arm: amlogic: sort SM1 bindings arm64: dts: meson: fix broken wifi node for Khadas VIM3L arm64: dts: meson: add i2c3/rtc nodes and rtc aliases to ODROID-N2 dtsi ARM: dts: meson: add the AO ARC remote processor dt-bindings: Amlogic: add the documentation for the SECBUS2 registers dt-bindings: sram: Add compatible strings for the Meson AO ARC SRAM arm64: dts: meson: shorten audio card names for alsa compatibility arm64: dts: meson: add initial Beelink GS-King-X device-tree dt-bindings: arm: amlogic: add support for the Beelink GS-King-X arm64: dts: meson: Fix schema warnings for pwm-leds arm64: dts: meson: vim3: whitespace fixups arm64: dts: meson: switch TFLASH_VDD_EN pin to open drain on Odroid-C4 Revert "arm64: dts: amlogic: add missing ethernet reset ID" arm64: dts: amlogic: meson-g12: Set FL-adj property value Link: https://lore.kernel.org/soc/7heehq7ag3.fsf@baylibre.com/ Signed-off-by:
-
Arnd Bergmann authored
Merge tag 'amlogic-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic into arm/dt ARM: dts: amlogic updates for v5.12 - add thermal zones with cooling configuration * tag 'amlogic-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic: ARM: dts: meson8b: add the thermal-zones with cooling configuration ARM: dts: meson8: add the thermal-zones with cooling configuration ARM: dts: meson: add the ADC thermal sensor to meson.dtsi ARM: dts: meson: move iio-hwmon for the SoC temperature to meson.dtsi Link: https://lore.kernel.org/r/7ho8h12bto.fsf@baylibre.com Signed-off-by:
-
https://github.com/Xilinx/linux-xlnxArnd Bergmann authored
arm64: dts: ZynqMP DT changes for v5.12 - Wire clock chips present on boards - Enable reset, qspi, nand, watchdog and DP IPs - Enable phy driver for sata and DP - Add iommu description - Add support for zcu104 revC+ boards - Various small changes - Add missing labels - Fix typos in documentation - Add missing boards * tag 'zynqmp-dt-for-v5.12' of https://github.com/Xilinx/linux-xlnx: arm64: dts: zynqmp: Wire up the DisplayPort subsystem arm64: dts: zynqmp: Add DisplayPort subsystem arm64: dts: zynqmp: Add DPDMA node dt-bindings: arm: Fix typo in zcu111 board arm64: dts: zynqmp: Add description for zcu104 revC arm64: dts: zynqmp: Add missing iommu IDs arm64: dts: zynqmp: Add missing lpd watchdog node arm64: dts: zynqmp: Wire zynqmp qspi controller arm64: dts: zynqmp: Wire arasan nand controller arm64: dts: zynqmp: Add missing mio-bank properties to sdhcis arm64: dts: zynqmp: Add label for zynqmp_ipi arm64: dts: zynqmp: Enable phy driver for Sata on zcu102/zcu104/zcu106 arm64: dts: zynqmp: Enable reset controller driver arm64: dts: zynqmp: Enable si5341 driver for zcu102/106/111 arm64: dts: zynqmp: Add DT description for si5328 for zcu102/zcu106 arm64: dts: zynqmp: Fix u48 si5382 chip on zcu111 arm64: dts: zynqmp: Add address-cells property to interrupt controllers Link: https://lore.kernel.org/r/b1a6f89e-f6b4-757b-daf0-d2f1844b833d@xilinx.com Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linuxArnd Bergmann authored
Samsung DTS ARM changes for v5.12 1. Use new compatile to properly configure Exynos5420 USB2 PHY, fixing it suspend/resume cycle. 2. Correct Samsung PMIC interrupt trigger levels on multiple boards. 3. Correct the voltages of Samsung GT-I9100 charger and add top-off charger. * tag 'samsung-dt-5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux: ARM: dts: exynos: Add top-off charging regulator node for I9100 ARM: dts: exynos: Fix charging regulator voltage and current for I9100 ARM: dts: exynos: correct PMIC interrupt trigger level on Odroid XU3 family ARM: dts: exynos: correct PMIC interrupt trigger level on Arndale Octa ARM: dts: exynos: correct PMIC interrupt trigger level on Spring ARM: dts: exynos: correct PMIC interrupt trigger level on Rinato ARM: dts: exynos: correct PMIC interrupt trigger level on Monk ARM: dts: exynos: correct PMIC interrupt trigger level on Artik 5 ARM: dts: exynos: use Exynos5420 dedicated USB2 PHY compatible Link: https://lore.kernel.org/r/20210125191240.11278-3-krzk@kernel.org Signed-off-by:
-
- Feb 09, 2021
-
-
Eddie James authored
Add the Everest machine powered by an AST2600 chip. Copy the basic configuration from Rainier. Signed-off-by:
Eddie James <eajames@linux.ibm.com> Tested-by:
Andrew Geissler <geissonator@gmail.com> Link: https://lore.kernel.org/r/20201211170704.27640-1-eajames@linux.ibm.com Signed-off-by:
-
George Liu authored
power-supply is compatible with Inspur's ipsps1 driver Signed-off-by:
George Liu <liuxiwei@inspur.com> Link: https://lore.kernel.org/r/20201225015149.1416773-1-liuxiwei@inspur.com Signed-off-by:
-
George Liu authored
Signed-off-by:
-
Ryan Sie authored
The x11spi is a server platform with an ASPEED AST2500 BMC. Signed-off-by:
Ryan Sie <ryans@supermicro.com.tw> Link: https://lore.kernel.org/r/20201221134315.5544-1-RyanS@supermicro.com.tw Signed-off-by:
-
John Wang authored
The NCSI_BMC_R_SEL and EN_NCSI_SWITCH_N should be active-high Signed-off-by:
John Wang <wangzhiqiang.bj@bytedance.com> Reviewed-by:
-
Lotus Xu authored
Enable ipmb on i2c4. Signed-off-by:
Lotus Xu <xuxiaohan@bytedance.com> Signed-off-by:
-
Andrew Jeffery authored
Determined by scope measurements at speed. Signed-off-by:
-
John Wang authored
Signed-off-by:
-
Quan Nguyen authored
The Mt. Jade BMC is an ASPEED AST2500-based BMC for the Mt. Jade hardware reference platform with Ampere's Altra Processor Family. Signed-off-by:
Quan Nguyen <quan@os.amperecomputing.com> Signed-off-by:
Phong Vo <phong@os.amperecomputing.com> Signed-off-by:
Thang Q. Nguyen <thang@os.amperecomputing.com> Reviewed-by:
-
Christian Hewitt authored
ODROID-HC4 is a derivative of the C4 with minor differences: - 16MB XT25F128B SPI-NOR flash - 2x SATA ports via ASM1061 PCIe to SATA controller - 7-pin header with SPI and I2C for 1-inch OLED display and RTC - 1x USB 2.0 host port Signed-off-by:
Christian Hewitt <christianshewitt@gmail.com> Reviewed-by:
Neil Armstrong <narmstrong@baylibre.com> Signed-off-by:
Kevin Hilman <khilman@baylibre.com> Link: https://lore.kernel.org/r/20210202021021.11068-6-christianshewitt@gmail.com
-
Christian Hewitt authored
Add the board bindings for the ODROID-HC4 device. Signed-off-by:
-
Christian Hewitt authored
Convert the ODROID-C4 dts to meson-sm1-odroid.dtsi and C4 board dts in preparation for adding additional C4 family boards. Signed-off-by:
-
- Feb 04, 2021
-
-
Christian Hewitt authored
Sort the Makefile before adding new SM1 devices. Signed-off-by:
-
Christian Hewitt authored
Sort the bindings before adding new SM1 devices. Signed-off-by:
-
Artem Lapkin authored
move &sd_emmc_a ... from /* */ commented area, because cant load wifi fw without sd-uhs-sdr50 option on VIM3L [ 11.686590] brcmfmac: brcmf_chip_cores_check: CPU core not detected [ 11.696382] brcmfmac: brcmf_sdio_probe_attach: brcmf_chip_attach failed! [ 11.706240] brcmfmac: brcmf_sdio_probe: brcmf_sdio_probe_attach failed [ 11.715890] brcmfmac: brcmf_ops_sdio_probe: F2 error, probe failed -19... [ 13.718424] brcmfmac: brcmf_chip_recognition: chip backplane type 15 is not supported Signed-off-by:
Artem Lapkin <art@khadas.com> Fixes: f1bb924e ("arm64: dts: meson: fix mmc0 tuning error on Khadas VIM3") Reviewed-by:
-
Christian Hewitt authored
Enable the onboard pcf8563 rtc hardware on ODROID N2/N2+ boards via the common dtsi. Also add aliases to ensure vrtc does not claim /dev/rtc0. Signed-off-by:
-
Martin Blumenstingl authored
The 32-bit Amlogic Meson SoCs embed an ARC processor in the Always-On power domain which is typically used for managing system suspend. The memory for this ARC core is taken from the AHB SRAM area. Depending on the actual SoC a different ARC core is used: - Meson6 and earlier: some ARCv1 ISA based core (probably an ARC625) - Meson8 and later: an ARC EM4 (ARCv2 ISA) based core Add the device-tree node for this remote-processor along with the required SRAM sections, clocks and reset-lines. Also use the SoC-specific compatible string to manage any differences (should they exist). On Meson8, Meson8b and Meson8m2 the "secbus2" IO region is needed as some bits need to be programmed there. Add this IO region for those SoCs as well. Signed-off-by:
Martin Blumenstingl <martin.blumenstingl@googlemail.com> Reviewed-by:
-
Martin Blumenstingl authored
The Meson8/Meson8b/Meson8m2 SoCs have a register bank called SECBUS2 which contains registers for various IP blocks such as pin-controller bits for the BSD_EN and TEST_N GPIOs as well as some AO ARC core control bits. The registers can be accessed directly when not running in "secure mode". When "secure mode" is enabled then these registers have to be accessed through secure monitor calls. So far these SoCs are always known to boot in "non-secure mode". Add a binding documentation using syscon (as these registers are shared across different IPs) for the SECBUS2 registers. Signed-off-by:
Rob Herring <robh@kernel.org> Signed-off-by:
-
Martin Blumenstingl authored
Amlogic Meson8, Meson8b and Meson8m2 SoCs embed an ARC EM4 core typically used for managing system suspend. A section of the SoCs SRAM is mapped as memory for this ARC core. Add new compatible strings for the SRAM section for the ARC core memory. Signed-off-by:
-
Christian Hewitt authored
This patch shortens all audio card model names by dropping the SoC prefix (for conformity) and rewording those that are still longer than alsa's 15 character name limit [0] to avoid userspace config issues. [0] https://github.com/torvalds/linux/blob/master/Documentation/sound/alsa-configuration.rst#common-parameters-for-top-sound-card-modules Signed-off-by:
-
Christian Hewitt authored
The Shenzen AZW (Beelink) GS-King-X is based on the Amlogic W400 reference board with an S922X-H chip. - 4GB LPDDR4 RAM - 64GB eMMC storage - 10/100/1000 Base-T Ethernet - AP6356S Wireless (802.11 a/b/g/n/ac, BT 4.1) - HDMI 2.1 video - S/PDIF optical output - 2x ESS9018 audio DACs - 4x Ricor RT6862 audio amps - Analogue headphone output - 1x USB 2.0 OTG port - 3x USB 3.0 ports - IR receiver - 1x micro SD card slot (internal) - USB SATA controller with 2x 3.5" drive bays - 1x Power on/off button Signed-off-by:
-
Christian Hewitt authored
The Shenzen AZW (Beelink) GS-King-X is based on the Amlogic W400 reference board with an S922X-H chip. Signed-off-by:
-
Alexander Dahl authored
The node names for devices using the pwm-leds driver follow a certain naming scheme (now). Parent node name is not enforced, but recommended by DT project. Signed-off-by:
Alexander Dahl <post@lespocky.de> Reviewed-by:
-
Jerome Brunet authored
Spaces have been used to indent 2 nodes. Replace those with tabs and remove one extra newline Signed-off-by:
Jerome Brunet <jbrunet@baylibre.com> Signed-off-by:
-
