Prevent setting fan_div from stomping on other fans that share the
same I2C register.

Signed-off-by: Gabriele Gorla <gorlik@penguintown.net>
Cc: stable@kernel.org
Signed-off-by: Jean Delvare <khali@linux-fr.org>

The manual fan speed control logic of the IT8721F is much different
from what older devices had. Update the code to properly support that.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Acked-by: Guenter Roeck <guenter.roeck@ericsson.com>

Merge branches 'x86-fixes-for-linus', 'perf-fixes-for-linus' and 'sched-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86/pvclock: Zero last_value on resume

* 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  perf record: Fix eternal wait for stillborn child
  perf header: Don't assume there's no attr info if no sample ids is provided
  perf symbols: Figure out start address of kernel map from kallsyms
  perf symbols: Fix kallsyms kernel/module map splitting

* 'sched-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  nohz: Fix printk_needs_cpu() return value on offline cpus
  printk: Fix wake_up_klogd() vs cpu hotplug

* 'drm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6:
  drm/i915: i915 cannot provide switcher services.
  drm/radeon/kms: fix vram base calculation on rs780/rs880
  drm/radeon/kms: fix formatting of vram and gtt info
  drm/radeon/kms: forbid big bo allocation (fdo 31708) v3
  drm: Don't try and disable an encoder that was never enabled
  drm: Add missing drm_vblank_put() along queue vblank error path
  drm/i915/dp: Only apply the workaround if the select is still active
  drm/i915: Emit a request to clear a flushed and idle ring for unbusy bo
  drm/i915/lvds: Always restore panel-fitter when enabling the LVDS
  drm/i915/ringbuffer: Only print an error on the second attempt to reset head
  drm/i915: announce to userspace that the bsd ring is coherent
  agp/intel: Fix wrong kunmap in i830_cleanup()
  drm/i915: Factor in pixel-repeat in FDI M/N calculation
  drm/i915: Death to the unnecessary 64bit divide
  drm/i915: Clean conflicting modesetting registers upon init
  drm/i915: Apply a workaround for transitioning from DP on pipe B to HDMI.
  drm/i915: Always set the DP transcoder config to 8BPC.

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: wacom - add new Bamboo PT (0xdb)
  Input: add input driver for polled GPIO buttons
  Input: turbografx - fix reference counting
  Input: synaptics - fix handling of 2-button ClickPads
  Input: wacom - add IDs for two new Bamboo PTs
  Input: document struct input_absinfo
  Input: add keycodes for touchpad on/off keys
  Input: usbtouchscreen - add support for LG Flatron T1710B

it has a DSM but the switcher is done via WMI.

Signed-off-by: Dave Airlie <airlied@redhat.com>

Adds new Bamboo Pen & Touch model - Bamboo P & T Special Edition
Medium (CTH661/L; Product ID = 0xdb).

Tested-by: Tobias Verbeke <tobias.verbeke@gmail.com>
Signed-off-by: David Foley <favux.is@gmail.com>
Acked-by: Ping Cheng <pingc@wacom.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>

* 'fixes/2637-rc5/s3c24xx' of git://git.fluff.org/bjdooks/linux:
  ARM: S3C24XX: Fix mess with gpio {set,get}_pull callbacks
  ARM: mini2440: Fix Kconfig to allow kernel to build
  ARM: S3C2412: Fix typo in CONFIG_CPU_S3C2412_ONLY definition
  ARM: S3C2443: Select properly ARM core type
  ARM: SMDK2416: Select MACH_SMDK, S3C_DEV_NAND, S3C_DEV_USB_HOST

Currently the {set,get}_pull callbacks of the s3c24xx_gpiocfg_default structure
are initalized via s3c_gpio_{get,set}pull_1up. This results in a linker
error when only CONFIG_CPU_S3C2442 is selected:

arch/arm/plat-s3c24xx/built-in.o:(.data+0x13f4): undefined reference to
`s3c_gpio_getpull_1up'
arch/arm/plat-s3c24xx/built-in.o:(.data+0x13f8): undefined reference to
`s3c_gpio_setpull_1up'

The s3c2442 has pulldowns instead of pullups compared to the s3c2440.
The method of controlling them is the same though.
So this patch modifies the existing s3c_gpio_{get,set}pull_1up helper functions
to take an additional parameter deciding whether the pin has a pullup or pulldown.
The s3c_gpio_{get,set}pull_1{down,up} functions then wrap that functions passing
either S3C_GPIO_PULL_UP or S3C_GPIO_PULL_DOWN.

Furthermore this patch sets up the s3c24xx_gpiocfg_default.{get,set}_pull fields
in the s3c244{0,2}_map_io function to the new pulldown helper functions.

Based on patch from "Lars-Peter Clausen" <lars@metafoo.de>

Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>

Avoid overflowing a 32 bit value.

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Cc: stable@kernel.org
Signed-off-by: Dave Airlie <airlied@redhat.com>

print the full 64 bit values.

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

Forbid allocating buffer bigger than visible VRAM or GTT, also
properly set lpfn field.

v2 - use max macro
   - silence warning
v3 - don't explicitly set range limit
   - use min macro

Cc: stable <stable@kernel.org>

Signed-off-by: Jerome Glisse <jglisse@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

Prevents code that assumes that the encoder is active when asked to be
disabled from dying a horrible death.

Reported-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Dave Airlie <airlied@redhat.com>

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Kristian Høgsberg <krh@bitplanet.net>
Acked-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>

Merge branch 'drm-intel-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/ickle/drm-intel into drm-fixes

As we may try to power down the link at various times, it is not
necessarily still coupled with an encoder and so we must be careful not
to depend upon an operation that is only valid when the link is still
attached to a pipe.

Fixes regression in 5bddd17f

.

Reported-and-tested-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: stable@kernel.org [after applying 5bddd17f]

Fix the name of interrupt mask alteration function (ie the
local_change_intr_mask_level() fn) called in gdbstub to have an arch_
prefix to match the definition in asm/irqflags.h.

Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Merge branch 'irq-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'irq-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  genirq: Fix incorrect proc spurious output

Merge branch 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mjg59/platform-drivers-x86

* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mjg59/platform-drivers-x86:
  wmi: use memcmp instead of strncmp to compare GUIDs
  ACPI, hp-wmi: Fix memory leak in acpi query
  msi-wmi: fix semantically incorrect use of keycode instead of scancode
  msi-wmi: Add mute key support
  asus-laptop: add wimax and wwan support
  eeepc-wmi: fix compiler warning
  ibm_rtl: _RTL_ is not available in UEFI mode
  ibm_rtl: Loosen the DMI criteria to all IBM machines
  drivers/platform/x86/thinkpad_acpi.c: delete double assignment
  eeepc-wmi: add cpufv sysfs documentation
  toshiba_acpi.c: Add key_entry for a lone FN keypress
  ibm_rtl: fix printk format warning

* 'for-linus' of git://git390.marist.edu/pub/scm/linux-2.6:
  [S390] css: fix rsid evaluation for 2nd crw
  [S390] nohz/s390: fix arch_needs_cpu() return value on offline cpus

With the recent changes to remove the BKL a mutex was added to the
ioctl entry point for calls to the old ioctl interface. This mutex
needs to be removed because of the need for the expire ioctl to call
back to the daemon to perform a umount and receive a completion
status (via another ioctl).

This should be fine as the new ioctl interface uses much of the same
code and it has been used without a mutex for around a year without
issue, as was the original intention.

Ref: Bugzilla bug 23142

Signed-off-by: Ian Kent <raven@themaw.net>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

In order for bos to retire eventually, a request must be sent down the
ring. This is expected, for example, by occlusion queries for which mesa
will wait upon (whilst running glean) before issuing more batches and so
the normal activity upon the ring is suspended and we need to emit a
request to clear the idle ring.

Reported-by: Jinjin, Wang <jinjin.wang@intel.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=30380


Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>

* 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jlbec/ocfs2:
  ocfs2_connection_find() returns pointer to bad structure
  ocfs2: char is not always signed
  Ocfs2: Stop tracking a negative dentry after dentry_iput().
  ocfs2: fix memory leak
  fs/ocfs2/dlm: Use GFP_ATOMIC under spin_lock

Commit 0ea12930

 ("arm: return both physical and virtual addresses
from addruart") took out the test for MMU on/off but didn't switch the
ldr instructions to no longer be conditionals based on said test.

Fix that.

Signed-off-by: Olof Johansson <olof@lixom.net>
Acked-by: Colin Cross <ccross@android.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

The existing gpio-keys driver can be usable only for GPIO lines with
interrupt support. Several devices have buttons connected to a GPIO
line which is not capable to generate interrupts. This patch adds a
new input driver using the generic GPIO layer and the input-polldev
to support such buttons.

[Ben Gardiner <bengardiner@nanometrics.ca: fold code to use more
 of the original gpio_keys infrastructure; cleanups and other
 improvements.]

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
Signed-off-by: Ben Gardiner <bengardiner@nanometrics.ca>
Tested-by: Ben Gardiner <bengardiner@nanometrics.ca>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>

* 'pm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/suspend-2.6:
  PM / Hibernate: Fix memory corruption related to swap
  PM / Hibernate: Use async I/O when reading compressed hibernation image

There is a problem that swap pages allocated before the creation of
a hibernation image can be released and used for storing the contents
of different memory pages while the image is being saved.  Since the
kernel stored in the image doesn't know of that, it causes memory
corruption to occur after resume from hibernation, especially on
systems with relatively small RAM that need to swap often.

This issue can be addressed by keeping the GFP_IOFS bits clear
in gfp_allowed_mask during the entire hibernation, including the
saving of the image, until the system is finally turned off or
the hibernation is aborted.  Unfortunately, for this purpose
it's necessary to rework the way in which the hibernate and
suspend code manipulates gfp_allowed_mask.

This change is based on an earlier patch from Hugh Dickins.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Reported-by: Ondrej Zary <linux@rainbow-software.org>
Acked-by: Hugh Dickins <hughd@google.com>
Reviewed-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: stable@kernel.org

* master.kernel.org:/home/rmk/linux-2.6-arm:
  ARM: 6524/1: GIC irq desciptor bug fix
  ARM: 6523/1: iop: ensure sched_clock() is notrace
  ARM: 6456/1: Fix for building DEBUG with sa11xx_base.c as a module.
  ARM: 6519/1: kuser: Fix incorrect cmpxchg syscall in kuser helpers
  ARM: 6505/1: kprobes: Don't HAVE_KPROBES when CONFIG_THUMB2_KERNEL is selected
  ARM: 6508/1: vexpress: Correct data alignment in headsmp.S for CONFIG_THUMB2_KERNEL
  ARM: 6507/1: RealView: Correct data alignment in headsmp.S for CONFIG_THUMB2_KERNEL
  ARM: 6504/1: Thumb-2: Fix long-distance conditional branches in head.S for Thumb-2.
  ARM: 6503/1: Thumb-2: Restore sensible zImage header layout for CONFIG_THUMB2_KERNEL
  ARM: 6502/1: Thumb-2: Fix CONFIG_THUMB2_KERNEL breakage in compressed/head.S
  ARM: 6501/1: Thumb-2: Correct data alignment for CONFIG_THUMB2_KERNEL in mm/proc-v7.S
  ARM: 6500/1: Thumb-2: Correct data alignment for CONFIG_THUMB2_KERNEL in kernel/head.S
  ARM: 6499/1: Thumb-2: Correct data alignment for CONFIG_THUMB2_KERNEL in bootp/init.S
  ARM: 6498/1: vfp: Correct data alignment for CONFIG_THUMB2_KERNEL
  ARM: 6497/1: kexec: Correct data alignment for CONFIG_THUMB2_KERNEL
  ARM: 6496/1: GIC: Do not try to register more then NR_IRQS interrupts
  ARM: cns3xxx: Fix build with CONFIG_PCI=y

This is a fix for reading LZO compressed image using async I/O.
Essentially, instead of having just one page into which we keep
reading blocks from swap, we allocate enough of them to cover the
largest compressed size and then let block I/O pick them all up. Once
we have them all (and here we wait), we decompress them, as usual.
Obviously, the very first block we still pick up synchronously,
because we need to know the size of the lot before we pick up the
rest.

Also fixed the copyright line, which I've forgotten before.

Signed-off-by: Bojan Smojver <bojan@rexursive.com>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>

While looking for the duplicates in /sys/class/wmi/, I couldn't find
them. The code that looks for duplicates uses strncmp in a binary GUID,
which may contain zero bytes. The right function is memcmp, which is
also used in another section of wmi code.

It was finding 49142400-C6A3-40FA-BADB-8A2652834100 as a duplicate of
39142400-C6A3-40FA-BADB-8A2652834100. Since the first byte is the fourth
printed, they were found as equal by strncmp.

Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@holoscopio.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
Cc: stable@kernel.org

When execvp fails to find the specified command on the path we won't get
SIGCHLD, so send a SIGUSR1 and exit right away.

Current situation would require a SIGINT performed by the user and would
produce meaningless summary.

Now:

[acme@emilia linux]$ ./foo
-bash: ./foo: No such file or directory
[acme@emilia linux]$ perf record ./foo
./foo: No such file or directory
[acme@emilia linux]$

Acked-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

gic_set_cpu will directly use irq_desc[]. If CONFIG_SPARSE_IRQ is
enabled, there is no irq_desc[]. So we need use irq_to_desc(irq) to
get the descriptor for irq.

Signed-off-by: Chao Xie <chao.xie@marvell.com>
Acked-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

* 'slab/urgent' of git://git.kernel.org/pub/scm/linux/kernel/git/penberg/slab-2.6:
  slub: Fix a crash during slabinfo -v

* 'rc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild-2.6:
  initramfs: Really fix build break on symbol-prefixed archs
  [media] Fix Kconfig errors due to two visible menus
  i2c/algos: convert Kconfig to use the menu's `visible' keyword
  media/video: convert Kconfig to use the menu's `visible' keyword
  Revert "i2c: Fix Kconfig dependencies"
  kconfig: regen parser
  kconfig: add an option to determine a menu's visibility

* 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/kyle/parisc-2.6:
  parisc: Fix GSC PS/2 driver name for keyboard and mouse
  parisc: KittyHawk LCD fix
  parisc: convert the rest of the irq handlers to simple/percpu
  parisc: fix dino/gsc interrupts
  parisc: remove redundant initialization in sigsegv path of sys_rt_sigreturn

Because it caused a chroot ttyname regression in 2.6.36.

As of 2.6.36 ttyname does not work in a chroot.  It has already been
reported that screen breaks, and for me this breaks an automated
distribution testsuite, that I need to preserve the ability to run the
existing binaries on for several more years.  glibc 2.11.3 which has a
fix for this is not an option.

The root cause of this breakage is:

    commit 8df9d1a4


    Author: Miklos Szeredi <mszeredi@suse.cz>
    Date:   Tue Aug 10 11:41:41 2010 +0200

    vfs: show unreachable paths in getcwd and proc

    Prepend "(unreachable)" to path strings if the path is not reachable
    from the current root.

    Two places updated are
     - the return string from getcwd()
     - and symlinks under /proc/$PID.

    Other uses of d_path() are left unchanged (we know that some old
    software crashes if /proc/mounts is changed).

Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

So remove the nice sounding, but ultimately ill advised change to how
/proc/fd symlinks work.

Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Linus Torvalds pointed out that our code was unbalanced when powering on
the panel with respect to the power off sequence in that we were failing
to restore the panel-fitter. The consequence of this would be that
across a simple DPMS off/on for a non-native mode, without an intervening
modeset, the panel fitter would remain disabled and the output would shift
on the panel.

Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>

There's not much we can do here but hope for the best. However the first
failure happens quite frequently and if often remedied by the second
attempt to reset HEAD. So only print the error if that attempt also
fails.

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=19802


Reported-by: Thomas Meyer <thomas@m3y3r.de>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: stable@kernel.org